Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
790960
65
65
60
60
06
06
08
08
set by hand or by optional RCU (Remote Control Unit)
80010826
Type No.
790 960
1710 2180
790 862 MHz
824 894 MHz
880 960 MHz
1710 1880 MHz 1850 1990 MHz 1920 2180 MHz
+45, 45
+45, 45
+45, 45
+45, 45
+45, 45
+45, 45
16.4 ... 16.6 ... 16.4 16.5 ... 16.7 ... 16.5 16.5 ... 17.0 ... 16.4 18.2 ... 18.4 ... 18.0 18.5 ... 18.5 ... 18.0 18.1 ... 18.5 ... 18.0
0 ... 4 ... 8
0 ... 4 ... 8
0 ... 4 ... 8
0 ... 3 ... 6
0 ... 3 ... 6
0 ... 3 ... 6
Frequency range
Polarization
Gain (dBi)
Tilt
Horizontal Pattern:
Half-power beam width
66
65
63
61
60
61
Front-to-back ratio, copalar
> 29 dB
> 30 dB
> 29 dB
> 27 dB
> 26 dB
> 26 dB
Cross polar ratio
Typically:
Typically:
Typically:
Typically:
Typically:
Typically:
Maindirection
0
> 27 dB
> 28 dB
> 27 dB
> 27 dB
> 29 dB
> 25 dB
Sector
60
> 12 dB
> 10 dB
> 10 dB
> 12 dB
> 10 dB
> 10 dB
Tracking, Avg.
1.5 dB
0.5 dB
Squint
3.0
2.5
Vertical Pattern:
Half-power beam width
8.0
7.9
7.5
5.0
4.8
4.4
Electrical tilt
08, continuously adjustable
06, continuously adjustable
Sidelobe supression for rst
0 ... 4 ... 8 T
0 ... 4 ... 8 T
0 ... 4 ... 8 T
0 ... 3 ... 6 T
0 ... 3 ... 6 T
0 ... 3 ... 6 T
sidelobe above main beam avg. 17 ... 16 ... 16 dB 19 ... 16 ... 16 dB 19 ... 17 ... 16 dB 16 ... 15 ... 14 dB 16 ... 16 ... 15 dB 16 ... 16 ... 15 dB
Impedance
VSWR
Isolation: Intrasystem
Isolation: Intersystem
50
< 1.5
> 30 dB
Intermodulation IM3
Max. power per input
Total power
50
< 1.5
> 30 dB
65
790 960
45
1710 2180
45
790 960
45
17102180
45
790 960
+45
1710 2180
+45
790 960
+45
1710 2180
+45
7.8
7-16
Horizontal Pattern
Vertical Pattern
0 8 electrical downtilt
4.7
Horizontal Pattern
dB
10
10
www.kathrein.de
Input
Connector position
Adjustment
mechanism
Wind load
60
dB
936.4510/a
Subject to alteration.
7-16
7-16
7-16
7-16
7-16
7-16
Mechanical specifications
dB
dB
7-16
10
10
Vertical Pattern
0 6 electrical downtilt
8 x 7-16 female
Bottom
4 x, Position bottom
continuously adjustable
Frontal:
1930 N (at 150 km/h)
Lateral:
410 N (at 150 km/h)
Rearside: 2200 N (at 150 km/h)
200 km/h
2399 / 576 / 133 mm
H (Heavy)
39 kg / 41 kg (clamps incl.)
2576 x 600 x 170 mm
Panel and 2 units of clamps
for 42 115 mm diameter
80010826 Page 1 of 2
KATHREIN-Werke KG Anton-Kathrein-Strae 1 3 P.O. Box 10 04 44 83004 Rosenheim Germany Phone +49 8031 184-0 Fax +49 8031 184-820
Accessories
General Information
Accessories
Remarks
Weight
approx.
1 clamp
1.1 kg
1 clamp
1 clamp
1 downtilt kit
2.7 kg
4.8 kg
6.5 kg
Type No.
Description
738546
85010002
85010003
85010008
9 72
Material:
Grounding:
The metal parts of the antenna including the mounting and the inner
conductors are DC grounded.
2399
2432
2472
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Wall mounting with two half clamps 738546 (included in the scope of supply).
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the following items:
Low temperature: 55 C
High temperature (dry): +60 C
Ice protection:
Ice protection: Due to the very sturdy antenna construction and the
protection of the radiating system by the radome, the antenna remains
operational even under icy conditions.
Environmental tests:
Adjustment mechanism
with integrated scale
33.5 35.5
270
133*
110
99
45
34
17
1710-218
Tilt
Tilt
790-96
ilt
-2180 Til
10
790-960
Layout of interface:
50
476
576*
As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and thereby
respects the static mechanical load imposed on an antenna by wind at maximum velocity. Wind loads are
calculated according to DIN 1055-4. Extraordinary operating conditions, such as heavy icing or exceptional
dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or
even cause it to fall to the ground. These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers must
be obeyed.
Any previous datasheet issues have now become invalid.
Page 2 of 2 80010826
www.kathrein.de
KATHREIN-Werke KG Anton-Kathrein-Strae 1 3 P.O. Box 10 04 44 83004 Rosenheim Germany Phone +49 8031 184-0 Fax +49 8031 184-820
936.4510/a
Please note:
Subject to alteration.
Bottom view
* Dimensions refer to radome