Sei sulla pagina 1di 13

Dashboard Campus based Instruction Non-Specific Programs

2016-17 Semester 1 S1-16_ENGGZC242 General EC1 - Quiz 1


Started on

State

Completed on

Time taken

Marks
Grade

Question 1
Correct

Mark 1.00 out of


1.00

Wednesday, 7 September 2016, 7:01 PM


Finished

Wednesday, 7 September 2016, 10:26 PM


3 hours 25 mins
16.00/25.00

3.20 out of 5.00 (64%)

Which is not a conditioning monitoring technology


Select one:

a. Ultrasonic

b. Infrared thermography
c. Welding

d. Gas leakage detection


Your answer is correct.

The correct answer is: Welding


Question 2
Incorrect

Mark 0.00 out of


1.00

Reliability problem deals with which of the following


Select one:

a. Maintenance
b. Repair

c. Both (a) and (b)

d. Neither (a) nor (b)


Your answer is incorrect.

The correct answer is: Both (a) and (b)

Question 3
Correct

Mark 1.00 out of


1.00

Which NDT technique is suitable for detecting cracks as well as change in


thickness of the heat exchanger tubes Select one:

a. Radiography

b. Eddy currents
c. Ultrasonic

d. Dye penetrant testing.


Your answer is correct.

The correct answer is: Eddy currents


Question 4
Correct

Mark 1.00 out of


1.00

Which is considered as the backbone of done on buisness


Select one:

a. Communication
b. Mentoring

c. Follow-through
d. None

Your answer is correct.

The correct answer is: Communication

Question 5
Correct

Mark 1.00 out of


1.00

The maintenance philosophy of operating the machine until it fails is called -

Select one:

a. Preventive maintenance
b. Proactive maintenance

c. Breakdown maintenance
d. Predictive maintenance
Your answer is correct.

The correct answer is: Breakdown maintenance


Question 6
Correct

Mark 1.00 out of


1.00

Vibration analysis is a technique adopted under Select one:

a. Predictive maintenance

b. Breakdown maintenance
c. Proactive maintenance

d. Preventive maintenance
Your answer is correct.

The correct answer is: Predictive maintenance

Question 7
Incorrect

Mark 0.00 out of


1.00

Choose the correct statement regarding Root cause Analysis (RCA)


Select one:

a. Driven by maintenance prevention strategies.

b. Provides a flow diagram that gives details on what type of


maintenance to use.

c. Failures modes are identified as the root cause of the failure.

d. Used to determine the maintenance requirements of any physical assets


in its operating context
Your answer is incorrect.

The correct answer is: Driven by maintenance prevention strategies.


Question 8
Incorrect

Mark 0.00 out of


1.00

Root cause failure analysis is a technique adopted under Select one:

a. Breakdown maintenance
b. Preventive maintenance
c. Proactive maintenance

d. Predictive maintenance
Your answer is incorrect.

The correct answer is: Proactive maintenance

Question 9
Correct

Mark 1.00 out of


1.00

Which of the following helps in new product development


Select one:

a. Testability

b. Supportability

c. Both (a) and (b)

d. Neither (a) nor (b)


Your answer is correct.

The correct answer is: Both (a) and (b)


Question 10
Incorrect

Mark 0.00 out of


1.00

Ultrasounds are waves with frequencies over -

Select one:

a. 20 kHz

b. 100 kHz
c. 100 Hz
d. 20 Hz

Your answer is incorrect.

The correct answer is: 20 Hz

Question 11
Correct

Mark 1.00 out of


1.00

Which is a failure mode in case of Cathode ray tube failure -

Select one:

a.
Performance degradation
b.
Blurred image

c.
Incorrect colour

d.
All of the above
Your answer is correct.
The correct answer is:
All of the above
Question 12
Correct

Mark 1.00 out of


1.00

Which NDT technique is suitable for detecting voids in large castings


Select one:

a. Radiography

b. Dye penetrant testing


c. Ultrasonic

d. Eddy Currents
Your answer is correct.

The correct answer is: Ultrasonic

Question 13
Correct

Mark 1.00 out of


1.00

A machine has two components A & B in parallel. If reliability of components A


& B are 0.60 & 0.70 respectively, determine the net reliability of the system.
Select one:

a. 0.72
b. 0.82
c. 0.58

d. 0.88
Your answer is correct.

The correct answer is: 0.88


Question 14
Incorrect

Mark 0.00 out of


1.00

Which type of maintenance is not directly included in the total maintenance cost,
but might be a component of total cost?

Select one:

a. Predictive maintenance

b. Preventive maintenance

c. Breakdown maintenance
d. Proactive maintenance
Your answer is incorrect.

The correct answer is: Predictive maintenance

Question 15
Correct

Mark 1.00 out of


1.00

_____________ensures that manufacturing concerns are systematically


incorporated into the design process.

Select one:

a. Modular design

b. Design for robustness

c. Quality function deployment


d. Design for manufacture
Your answer is correct.

The correct answer is: Design for manufacture


Question 16
Correct

Mark 1.00 out of


1.00

Root Cause Failure Analysis assesses a failure with the intent to determine the
root cause for occurrence.
Select one:

a. True

b. False

c. Both (a) and (b)

d. Neither (a) nor (b)


Your answer is correct.

The correct answer is: True

Question 17
Incorrect

Mark 0.00 out of


1.00

Vibration analysis (in the detection mode) is done -

Select one:

a. To detect the severity of fault in a machine

b. To ascertain the time after which machine or its component will fail
c. To detect faults in vibration measuring tools
d. On a regular basis for selected machines
Your answer is incorrect.

The correct answer is: On a regular basis for selected machines


Question 18
Correct

Mark 1.00 out of


1.00

Vibration analysis and the trending of vibration data cannot detect one of the
following:

Select one:

a. Bad bearings or gears


b. Rotor imbalance

c. Fouling of internals

d. Machinery alignment
Your answer is correct.

The correct answer is: Fouling of internals

Question 19
Incorrect

Mark 0.00 out of


1.00

The maintenance philosophy under which an operating machine is taken up for


maintenance based on the condition of its health to prevent a breakdown is called
-

Select one:

a. Breakdown maintenance
b. Proactive maintenance

c. Preventive maintenance
d. Predictive maintenance
Your answer is incorrect.

The correct answer is: Predictive maintenance


Question 20
Incorrect

Mark 0.00 out of


1.00

One of the following is not a predictive maintenance technique:

Select one:

a. Ultrasonic thickness measurement


b. Root cause failure analysis
c. Performance evaluation
d. Vibration analysis

Your answer is incorrect.

The correct answer is: Root cause failure analysis

Question 21
Correct

Mark 1.00 out of


1.00

Design for maintenance consists which of the following


Select one:

a. Error resistant

b. Visibility and accessibilty

c. Quick to address problems


d. All of the above

Your answer is correct.

The correct answer is: All of the above


Question 22
Correct

Mark 1.00 out of


1.00

A machine has two components A & B in series. If reliability of components A &


B are 0.60 & 0.70 respectively, determine the net reliability of the system.

Select one:

a. 0.12
b. 0.42
c. 0.18

d. 0.28
Your answer is correct.

The correct answer is: 0.42

Question 23
Correct

Mark 1.00 out of


1.00

Which material is used in ordinary thermal cameras -

Select one:

a. Pyrex

b. Arsenic

c. Germanium

d. All of the above


Your answer is correct.

The correct answer is: All of the above


Question 24
Correct

Mark 1.00 out of


1.00

Which of the following is/are non-destructive testing technique(s)


Select one:

a. Radiography

b. Magnetic particle testing


c. Acoustic emission
d. All of the above

Your answer is correct.

The correct answer is: All of the above

Question 25
Incorrect

Mark 0.00 out of


1.00

Predictive maintenance principles are analogous to:

Select one:

a. Crime detection

b. Failure analysis of electronic components


c. Forensic medicine
d. Medical science

Your answer is incorrect.

The correct answer is: Medical science

Potrebbero piacerti anche