Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
B) Shear
C) Compressive
D) X X X X
My Answer was A.
6. What is the yield strength for most Reinforcing bars? Select one:
A) 400 MPa
B) 300 MPa
C) 600 MPa
D) 100 MPa
My Answer was A.
7. Admixtures added to Concrete for:
A) Increase the Concrete Strength.
B) Increase the initial setting of concrete.
C) Manage the Workability of Concrete.
D) Decrease the water Content.
E) B and C.
F) A and B.
My Answer was E.
8. Who Performs tests on engineered Products to determine their reliability and
suitability? Select one:
A) Production Engineers.
B) Research Engineers.
C) Testing Engineers.
D) Development Engineers.
My Answer was B.
9. Consider the following Statements: A) Shape factor.
B) Length of the Beam.
C) Type of Loading.
D) Yield Strength of material.
Which of these affect the influence Length of Plastic hinge in a beam? Select
one: A) 1 only
B) 1 and 3
C) 2 and 3
D) 3 and 4
My Answer was C.
10. Compaction Equipment can be used for Sand or Clay material as following,
choose the Right: A) Roller for Sand and Clay
B) Foot Shape for Sand and Clay.
C) Foot Shape for Sand.
D) Roller for Sand.
My Answer was D.
11. During the Project, your order can be changed due to: A) Owner change the
Requirement.
B) Error in Design.
C) Material not suitable.
D) X X X .
My Answer was A.
12. The most element effect in QSAS is:
A) Social
B) Environment.
C) Cost
D) x x x
My Answer was B.
13. This question is regarding the Deflection of Car Speed 60 mile/h when it reach
the Round about: A) 150 Feet.
B) 300 Feet.
C) 480 Feet.
D) 500 Feet.
My Answer was A.
14. This question about the method for in-situ test of Rock?
A) Coring
B) Textile
C) x x x
D) x x x
My Answer was B.
15. Calculate Value of
A) 0.769 P/EA
B) 9.5 P/EA
C) 21 P/EA
D) 42 P/EA
My Answer was A.
16. Calculate the Deflection:
A) 72 mm
B) 666 mm
C) 6.66 mm
C) 85 mm
My Answer was C.