Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Recommended use:
Service temperatures:
Availability:
PHYSICAL CONSTANTS:
Shade nos./Color :
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Surface dry:
Dry to touch:
Fully cured:
VOC content:
10000/White*
High gloss
63 1
12.6 m/litre - 50 micron
505 sq.ft./US gallon - 2 mils
27C/81F
1.3 kg/litre - 10.8 lbs/US gallon
4 hours at 20C/68F
8 hours at 20C/68F
7 days at 20C/68F
312 g/litre - 2.6 lbs/US gallon (US EPA Method 24)
*Other shades according to assortment list.
The physical constants stated are nominal data according to approved formulas.
APPLICATION DETAILS:
Version, mixed product
Mixing ratio:
Application method:
Thinner (max.vol.):
Pot life:
Nozzle orifice:
Nozzle pressure:
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Safety:
5595U
BASE 5595G : CURING AGENT 931US
4 : 1 by volume
Airless spray
Brush
821US (5%)
821US (5%)
1 hour at 20C/68F
0.017 - 0.019
150 bar/2200 psi
HEMPEL'S TOOL CLEANER 99CUS or HEMPELS THINNER 821US
50 micron/2 mils (see REMARKS overleaf)
75 micron/3 mils
See REMARKS overleaf
See REMARKS overleaf
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult Hempel Material Safety Data Sheets and follow all local
or national safety regulations.
Page: 1/2
The surface must be completely clean and dry at the time of application, and its temperature
above the dew point to avoid condensation. Minimum temperature for curing is -10C/14F. At
the freezing point and below, be aware of the risk of ice on the surface which will hinder the
adhesion. High humidity and/or condensation during application and the following 16 hours
(20C/68F) may adversely affect the film formation.
In confined spaces provide adequate ventilation during application and drying.
PRECEDING COAT:
SUBSEQUENT COAT:
REMARKS:
Film thicknesses/thinning:
May be specified in other film thicknesses than indicated depending on purpose and area of
use. This will alter spreading rate and may influence drying time and overcoating interval.
Normal range dry is 40 - 60 micron/1.6 - 2.4 mils.
Physical data versus temperatures:
Surface temperature
14F/-10C
32F/0C
50F/10C
68F/20C
86F/30C
3 days
36 hours
16 hours
8 hours
6 hours
Resist condensing
humidity/light showers after*:
Fully cured, 70% RH
7 days
3 days
32 hours
16 hours
12 hours
2 months
32 days
14 days
7 days
5 days
Min
6 days
3 days
32 hours
16 hours
12 hours
Max
None
None
None
None
None
Overcoating interval
with 5595U
Curing agent:
HEMPELS CURING AGENT 931US is sensitive to moisture. Store in a dry place and keep
the can tightly closed until use. Open curing agent cans with caution as overpressure might
exist. Even small traces of water in the mixed paint will reduce the pot-life and result in film
defects.
Note:
Issued by:
Page: 2/2