Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Specifications, page 2
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Specifications
Range of
Adjustment
Length
Width
Height
Weight
16 oz (455 g)
Material
Mount: nylon
Mounting plate: aluminum
Hardware: stainless steel
Environment
Indoor or outdoor
121463
Specifications
Description
Mounting kit
Mounting plate
1 x 14 nut
Flat washer
Step 2
OL-6390-01
Assembly Details
121463
Figure 1
Step 3
Attach the mounting plate to your antenna using the 1/4-20 x 1-inch bolts, flat washers, split washers,
and nuts as shown in Figure 2
Mounting the An tenna to the Mounting Plate
121462
Figure 2
Use the 1/4-20 x 1 15/16 inch fasteners to install the base of the mount to the surface on which you have
chosen to mount it. Make sure the base is securely fastened to its mounting surface. See Figure 3.
Figure 3
Horizontal
adjustment
Vertical
adjustment
121461
Mounting
surface
Note
You must provide adequate fasteners if those provided are incompatible with your installation.
Step 2
Use the 1-14 nut to install the antenna with mounting plate to the adjustable mount.
Step 3
Step 4
OL-6390-01
1
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks
can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word
partner does not imply a partnership relationship between Cisco and any other company. (1005R)