Sei sulla pagina 1di 2

Fanuc SRAM Cards

Memex offers Fanuc compatible PCMCIA SRAM backup cards for


Fanuc 16/18 Versions B & C, Fanuc Robots, Fanuc 15B and
Fanuc i Series Controls. The SRAM cards offer high-performance
nonvolatile memory storage solutions for code transfer and data
backup storage applications. With the right driver, the SRAM cards
appear as a "Removable Drive" when plugged into a computer simply "drag and drop" files once configured. These SRAM cards
are based on advanced CMOS technology that draws very low
power and has reliable data retention characteristics.
Our SRAM cards contain a rechargeable lithium battery and
recharge circuitry, thus eliminating the need for replacement
batteries found in many SRAM cards. Typical data retention time,
without recharging, is 1 year for a 2MB card. The minimum battery
life is 10 years. All our SRAM cards are built in welded stainless
steel housings to ensure card integrity and data retention.

Features Include:
Windows 98 to XP PCMCIA Static RAM Memory Cards that work in Fanuc MEM Card ports.
High performance SRAM memory card: 150ns access time
Capacities: 1, 2, 4, 6 & 8 Megabytes
Operating temperature: Commercial Range of 0 to +70C
Low power CMOS technology provides very low power and reliable data retention
characteristics
standby current < 100A typical
operating current: 190mA maximum for x16 operation at 150ns
Rechargeable lithium battery with recharge circuitry
eliminates the need to replace the battery
standby current during recharge typically < 2mA
battery backup time: 1 year typical based on 2MB (lower densities = longer storage times)
Unlimited write cycles, no endurance issues

Applicability List:
Memex Products:
Fanuc 16 Versions B &
1. SKU-2490 - 1 Megabyte
C Controls +

Fanuc
SRAM Card

Fanuc 18 Versions B &


C Controls +

2. SKU-2500 - 2 Megabyte

Fanuc 15 Version B
Controls +

3. SKU-2510 - 4 Megabyte

Fanuc 16/18/20/21 i
Series Controls +

4. SKU-2520 - 6 Megabyte

Fanuc Robots

5. SKU-2530 - 8 Megabyte

Backing Up A Fanuc Control


Get the size one bigger than the memory you have. For example:
CNC Memory
FROM (8+2Meg)
2 Megs (5120M)
1.5 Megs (3840M)
1 Meg (2560M)
512k (1280M)
256k (640M)
128k (320M)

SRAM Card Needed


8 Meg Card (or 6)
4 Meg Card
2 Meg Card
2 Meg Card
1 Meg Card
1 Meg Card
1 Meg Card

So if you have 2 Megabytes (5120 Meters of tape) of Fanuc 16 memory, you would need a 4
Megabyte SRAM card to back it up.
If you are installing Fanuc 16-MB FROM Board, you will need our 6 or 8 meg SRAM cards as
you need to backup the System Firmware + 2 Meg of SRAM..

Fanuc Master Trick:


If you have a Fanuc (e.g. a RoboDrill) that cannot erase its memory normally (Power On Holding
RESET + DELETE or "O" + DELETE), you can use this blank 512k file named SRAM2_5D.FDB
(from a Fanuc 16, 2 meg dump) and copy it over and over to the SRAM Card with the appropriate
names to make the CNC notice the files in the directory. Once reloaded, the sequential blank files
will have effectively cleared the memory.

Memex Automation Inc.


777 Walkers Line,
Burlington, Ontario
Canada
L7N 2G1
Phone: 905-635-3040
Fax: 905-631-9640
Sales:
Phone: 905-635-3043
Copyright 2007, Memex Automation Inc. All rights reserved.

File: p:\iso9000\docs\777 memex\m100756 fanuc sram cards.doc

Potrebbero piacerti anche