Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Specialty
Lubricants Dow Corning
High-Vacuum Grease
FEATURES
Low volatility to hold deep
vacuums
Resists oxidation
Nonmelting
Good thermal stability
COMPOSITION
Stiff, nonmelting silicone material
TYPICAL PROPERTIES
Specification Writers: Please contact your local Dow Corning sales office or your Global
Dow Corning Connection before writing specifications on this product.
Method
Test
Color
Penetration,
unworked
worked 60, max
worked 100,000
Service Temperature Range1
Bleed, after 24 hr at
200C (392F), max
Evaporation, after 24 hr at
199C (390F), max
ASTM D 217
ASTM D 70,
ASTM D 1217 Specific Gravity at 25C (77F)
ASTM D 2265 Drop Point
Water Spray Off
Unit
Result
Translucent white
mm/10
mm/10
mm/10
C (F)
185
205
227
-40 to 204 (-40 to 400)
percent
0.05
percent
1.1
g/cc
C (F)
percent
1.0
>300 (572)
1.65
Estimated service temperature range based on product formulation and laboratory testing. Actual service
temperature range is dependent on other factors including the specific application environment.
DESCRIPTION
LISTINGS/SPECIFICATIONS
FDA 21 CFR 175.300
USDA Approved for incidental
food contact in federally inspected
meat and poultry plants
NSF 61
PERFORMANCE DATA
Chemical Resistance
WARRANTY
INFORMATION
PACKAGING
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION
REQUIRED FOR SAFE USE IS NOT
INCLUDED IN THIS DOCUMENT.
BEFORE HANDLING, READ
PRODUCT AND MATERIAL
SAFETY DATA SHEETS AND
CONTAINER LABELS FOR SAFE
USE, PHYSICAL AND HEALTH
HAZARD INFORMATION. THE
MATERIAL SAFETY DATA SHEET
IS AVAILABLE FROM YOUR
DOW CORNING REPRESENTATIVE,
OR DISTRIBUTOR, OR BY CALLING
YOUR GLOBAL DOW CORNING
CONNECTION.
Printed in USA
Form No. 10-810A-01
None.
AGP4934
LIMITATIONS
Dow Corning High-Vacuum Grease is
not recommended for use:
In contact with liquid oxygen and
should not be used in applications
requiring LOX compatibility
With silicone elastomers
On surfaces to be painted; paints
will not adhere well
As a lubricant in metal bearings
This product is neither tested nor
represented as suitable for medical or
pharmaceutical uses.
SHIPPING LIMITATIONS