Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
NOTE: This article and all content are provided on an "as is" basis without any warranties of any kind,
whether express or implied, including, but not limited to the implied warranties of merchantability, fitness
for a particular purpose, and non-infringement. In no event shall Wonderware North be liable for any
special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or
profits, whether in an action of contract, negligence or other tortuous action, arising out of or in
connection with the use or performance of information contained in this article.
Introduction
InTouch 2014 R2 allows you to create Modern Applications, which allow the developer to harness the power of ArchestrA
graphics right from the InTouch WindowMaker itself without the use of the IDE! With the use of Modern applications, a
developer can create, modify, and embed ArchestrA graphics directly in WindowMaker.
Users that have already invested in building ArchestrA Graphics for InTouch tag-based applications may have an interest in
using this environment to simplify the development workflow. However, while InTouch 2014 R2 can import legacy
(standalone, non ArchestrA graphic) or already-made Modern Applications, there is not currently a built in Import for
Managed Applications. This document provides a supported method to bring your managed applications into the new
Modern Application environment.
Warnings/Notes
Please keep in mind that this document is meant for those using Managed Applications with the following:
-
InTouch tags
ArchestrA Graphics developed and embedded directly from the Graphic Toolbox.
There is no need to create a modern application when you are using a System Platform/Application Server Installation.
4)
5)
6)
7)
10) In the IDE, open up the graphic toolbox. Select all your folders, then right click and select Export->Objects. Name
the graphic export and select OK.
11) Close the IDE.
14) Open the application. After opening the app, immediately close the application.
17) When prompted, select Yes to the prompt, then browse to your CSV file and load. The Load should say Load
Successful.
18) Next, open InTouch Application manager, highlight your application, and open WindowMaker.
VI - Import Scripts
19) In WindowMaker, browse to File->Import->Windows and Scripts.
26)
27)
28)
29)
30)
Browse to the exported window folder that you created in step 3, and click ok.
Select Windows, then click the Select Button and Select All.
Make sure Use Existing Tags is checked, then click OK to import your windows.
If you wish, switch into WindowViewer Runtime to test.
Close your application. At this point, the application is now a Modern Application.