Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SER
1
1
.1
1. 1. 1
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
POWER TRANSFORMERS
Applicable Standards:
ABB
SWEDEN
Yes
ABB ( T& D)
United States-N/A
Yes
ABB Bilbao
SPAIN-Bilbao
Yes
53-TMSS-01
ABB TRANSIT OY
FINLAND
Yes
AREVA
GERMANY
Yes
BEST
Yes
Page 1 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
CG Electric Systems Zrt. (previously GANZ
Transelektro Electric Co., Ltd.)
FACTORY LOCATION
HUNGARY-Budapest
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD Letter 11-01981-1-03032301 dated July 11,
2011, it is pre-qualified for Power Transformers rated up to
132kV/100MVA as conforming to SEC Specification #
53-TMSS-01, Rev.0, with the following condition:
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated June 15, 2010.
CG POWER SYSTEMS
BELGIUM
Yes
CROMPTON GREAVES
INDIA
Yes
DAIHEN CORPORATION
JAPAN-OSAKA
Yes
JAPAN--
Yes
ITALY-Marcianise (CE)
Yes
United Kingdom
Yes
HITACHI Ltd.
JAPAN--
Yes
HYOSUNG (HICO)
Yes
HYUNDAI
Yes
Page 2 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ILJIN Electric Co. Ltd.
FACTORY LOCATION
SOUTH KOREA-Hongseong
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter # 12-03077-30504401 dated September
15, 2012 and S&SD letter # 15-02407-02-30504401 dated June
23, 2015. ILJIN ELECTRIC Co. Ltd Hongseong city, Korea is
prequalified for Power Transformers up to 230 kV, 166.7 MVA
as conforming to SEC/National Grid SA Specification #
53-TMSS-01 with the following conditions:
All Type, Routine and Special tests as per SEC/National Grid
SA Specifications shall be conducted on the proposed Power
Transformers in the Manufacturer's Testing Laboratory in the
presence of three (3) SEC/National Grid SA Engineers & one (1)
SEC/National Grid SA approved Independent Inspection Agency
(IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter # IL2014-11-05-01 dated
November 5, 2014.
Ten (10) years extended Warranty for the proposed Power
Transformers in respect of the defects due to design,
manufacturing, installation and workmanship from the date of
the Provisional Acceptance Certificate (PAC) of the project (in
case of contract award) and from the date of delivery for the
direct material supply order as confirmed through the
manufacturer letter # Nil dated November 5, 2014.
JEUMONT SCHNEIDER
FRANCE
Yes
CROATIA-Zagreb
Yes
Page 3 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Koncar Power Transformers Ltd.
FACTORY LOCATION
CROATIA-Zagreb
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter # 14-08041-01-03504401 dated
13/02/2014 & 14-08041-02-03504401 dated 25/03/2014, it is
pre-qualified for Power Transformer up to 100MVA, 132kV as
confirming to National Grid SA specification # 53-TMSS-01,
Rev.01 with the following conditions:
All Type, Special & Routine tests as per National Grid SA
Specifications/Standards shall be carried out on the first unit to
be supplied to National Grid SA in the Approved Independent
Testing Laboratory or in the manufacturers Testing Laboratory
in presence of three (03) National Grid SA Engineers & one (01)
Approved Independent Inspection Agency (IIA) Inspector. All
the costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer through their letter #
Nil, dated 01-04-2014.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) and from
the date of first delivery in case of direct material supply order
as confirmed by the manufacturer through their letter #
2014/02, dated 01-04-2014.
CHINA-Liaoning Province
Yes
JAPAN--
Yes
Page 4 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
PJSC Zaporozhtransformator (ZTR)
FACTORY LOCATION
Ukraine-Zaporizhia
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter# 13-07568-30504401 dated December
31, 2013, it is pre-qualified for Power Transformers rated up to
100 MVA, 132 kV as conforming to National Grid SA specification
# 53-TMSS-01, Rev.01, with the following conditions:
All Type, Special & Routine tests as per latest National Grid SA
Specifications/Standards & IEC requirements together (with
Thermal & Dynamic short-circuit calculations per IEC 60076-5)
shall be carried out on the next unit to be supplied to SEC/
National Grid SA in an Accredited Testing Laboratory in the
presence of three (3) National Grid SA Engineers & one (1)
National Grid SA approved Independent Inspection Agency
(IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter 1/115-2261 dated August 15,
2011.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
1/115-2266 dated August 15, 2011.
Saudi Arabia-Dammam
Yes
Page 5 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SC ELECTROPUTERE SA
FACTORY LOCATION
Romania-Craiova
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD letter # 11-002054-1-03032300
dated10/7/2011, it is prequalified for Power Transformer up to
132kV, 100MVA, as conforming to National Grid SA specification
# 53-TMSS-01, Rev.0 with the following condition:
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or date of
first delivery in case of direct material supply order. This was
confirmed by SC Electroputere SA through letter 27500 dated
14/06/2010.
SCHNEIDER ELECTRIC
TURKEY-Kocaeli
Yes
TURKEY-Cayirova-Kocaeli
Yes
SCHORCH
GERMANY
Yes
SIEMENS AG (NURNBERG)
GERMANY-NURNBERG
Yes
AUSTRIA- WEIZ
Yes
JAPAN--
Yes
WILSON TRANSF
AUSTRALIA-MELBOURNE
Yes
Page 6 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Total =
.2
1. 2. 1
32
69 KV PRIMARY
POWER TRANSFORMERS UP TO 67 MVA
Applicable Standards:
ABB
SWITZERLAND
Yes
ABB
SWEDEN
Yes
ABB ( T& D)
United States-N/A
Yes
ABB Bilbao
SPAIN-Bilbao
Yes
53-TMSS-01
TURKEY-Istanbul/Kartal
Yes
ABB TRANSIT OY
FINLAND
Yes
AREVA
GERMANY
Yes
BEST
Yes
Page 7 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
CG Electric Systems Zrt. (previously GANZ
Transelektro Electric Co., Ltd.)
FACTORY LOCATION
HUNGARY-Budapest
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD Letter 11-01981-1-03032301 dated July 11,
2011, it is pre-qualified for Power Transformers rated up to
132kV/100MVA as conforming to SEC Specification #
53-TMSS-01, Rev.0, with the following condition:
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated June 15, 2010.
CG POWER SYSTEMS
BELGIUM
Yes
DAIHEN CORPORATION
JAPAN-OSAKA
Yes
EFACEC
PORTUGAL
Yes
JAPAN--
Yes
ITALY-Marcianise (CE)
Yes
HITACHI Ltd.
JAPAN--
Yes
HYOSUNG (HICO)
Yes
HYUNDAI
Yes
Page 8 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ILJIN Electric Co. Ltd.
FACTORY LOCATION
SOUTH KOREA-Hongseong
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter # 12-03077-30504401 dated September
15, 2012 and S&SD letter # 15-02407-02-30504401 dated June
23, 2015. ILJIN ELECTRIC Co. Ltd Hongseong city, Korea is
prequalified for Power Transformers up to 230 kV, 166.7 MVA
as conforming to SEC/National Grid SA Specification #
53-TMSS-01 with the following conditions:
All Type, Routine and Special tests as per SEC/National Grid
SA Specifications shall be conducted on the proposed Power
Transformers in the Manufacturer's Testing Laboratory in the
presence of three (3) SEC/National Grid SA Engineers & one (1)
SEC/National Grid SA approved Independent Inspection Agency
(IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter # IL2014-11-05-01 dated
November 5, 2014.
Ten (10) years extended Warranty for the proposed Power
Transformers in respect of the defects due to design,
manufacturing, installation and workmanship from the date of
the Provisional Acceptance Certificate (PAC) of the project (in
case of contract award) and from the date of delivery for the
direct material supply order as confirmed through the
manufacturer letter # Nil dated November 5, 2014.
JEUMONT SCHNEIDER
FRANCE
Yes
CROATIA-Zagreb
Yes
Page 9 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Koncar Power Transformers Ltd.
FACTORY LOCATION
CROATIA-Zagreb
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter # 14-08041-01-03504401 dated
13/02/2014 & 14-08041-02-03504401 dated 25/03/2014, it is
pre-qualified for Power Transformer up to 100MVA, 132kV as
confirming to National Grid SA specification # 53-TMSS-01,
Rev.01 with the following conditions:
All Type, Special & Routine tests as per National Grid SA
Specifications/Standards shall be carried out on the first unit to
be supplied to National Grid SA in the Approved Independent
Testing Laboratory or in the manufacturers Testing Laboratory
in presence of three (03) National Grid SA Engineers & one (01)
Approved Independent Inspection Agency (IIA) Inspector. All
the costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer through their letter #
Nil, dated 01-04-2014.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed by the manufacturer through their letter # 2014/02,
dated 01-04-2014.
CHINA-Liaoning Province
Yes
JAPAN--
Yes
Page 10 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
PJSC Zaporozhtransformator (ZTR)
FACTORY LOCATION
Ukraine-Zaporizhia
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter# 13-07568-30504401 dated December
31, 2013, it is pre-qualified for Power Transformers rated up
to100 MVA, 132 kV as conforming to National Grid SA
specification # 53-TMSS-01, Rev.01, with the following
conditions:
All Type, Special & Routine tests as per latest National Grid SA
Specifications/Standards & IEC requirements together (with
Thermal & Dynamic short-circuit calculations per IEC 60076-5)
shall be carried out on the next unit to be supplied to SEC/
National Grid SA in an Accredited Testing Laboratory in the
presence of three (3) National Grid SA Engineers & one (1)
National Grid SA approved Independent Inspection Agency
(IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter 1/115-2261 dated August 15,
2011.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
1/115-2266 dated August 15, 2011.
Saudi Arabia-Dammam
Yes
Page 11 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SC ELECTROPUTERE SA
FACTORY LOCATION
Romania-Craiova
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD letter # 11-002054-1-03032300
dated10/7/2011, it is prequalified for Power Transformer up to
132kV, 100MVA, as conforming to National Grid SA specification
# 53-TMSS-01, Rev.0 with the following condition:
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or date of
first delivery in case of direct material supply order. This was
confirmed by SC Electroputere SA through letter 27500 dated
14/06/2010.
SCHNEIDER ELECTRIC
TURKEY-Kocaeli
Yes
TURKEY-Cayirova-Kocaeli
Yes
Page 12 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
Siemens AG (Dresden)
GERMANY-Dresden
Yes
SIEMENS AG (NURNBERG)
GERMANY-NURNBERG
Yes
AUSTRIA- WEIZ
Yes
TAMINI
ITALY
Yes
JAPAN--
Yes
WILSON TRANSF
AUSTRALIA-MELBOURNE
Yes
REMARKS
based on TS&SD letter# 09-01501-03032301 dated 25th May
2009 , Siemens AG from Germany-Dresden for Power
Transformer up to 230kV, 200MVA as confirming to SEC
specification # 53-TMSS-01, rev.0 & 53-TMSS-02, rev.0 with
the following conditions:
All type, special & routine tests for each voltage class as
per SEC specifications/standards shall be carried out on the first
batch to be supplied to SEC in securing an order in the presence
of three (3) SEC engineers & one (1) approved independent
inspection agency Inspector.
Total =
.3
1. 3. 1
34
Applicable Standards:
ABB
SWITZERLAND
Yes
ABB
SWEDEN
Yes
ABB ( T& D)
United States-N/A
Yes
ABB Bilbao
SPAIN-Bilbao
Yes
53-TMSS-01
Page 13 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
TURKEY-Istanbul/Kartal
Yes
ABB TRANSIT OY
FINLAND
Yes
ALSTOM Grid
TURKEY-Gebze
Yes
AREVA
GERMANY
Yes
BEST
Yes
REMARKS
Pre-Qualification & Participation for current & future SEC's
Projects subjected to the mutual agreement between SEC &
ABB dated 09 March 2009
BEST
Yes
HUNGARY-Budapest
Yes
CG POWER SYSTEMS
BELGIUM
Yes
CROMPTON GREAVES
INDIA
Yes
DAIHEN CORPORATION
JAPAN-OSAKA
Yes
EFACEC
PORTUGAL
Yes
Page 14 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
JAPAN--
Yes
ITALY-Marcianise (CE)
Yes
HAWKER SIDDELEY
United Kingdom
Yes
HITACHI Ltd.
JAPAN--
Yes
HYOSUNG (HICO)
Yes
HYUNDAI
Yes
Page 15 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Hyundai Heavy Industries Co. Bulgaria
FACTORY LOCATION
Bulgaria-Sofia
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD letter # 11-00438-03-03032301 dated
15/05/2011, it is prequalified for Power Transformers up to
132kV, 100MVA as confirming to SEC specification #
53-TMSS-01, Rev.0 with the following conditions:
All type, special, routine and sample tests as per SEC
specifications/standards
for Power Transformers up to 132kV, 100MVA shall be carried
out in case of contract award or SEC direct purchase order at
SEC approved independent laboratory or at manufacturers
testing laboratory in presence of three (3) SEC Engineers and
one (1) SEC approved independent inspection agency. All the
related costs for witnessing of the tests will be borne by the
manufacturer. This was confirmed by HHIBulgaria through
letter # D-0353 dated 20/08/2010.
Ten (10) years extended warranty from the date of PAC of
the turnkey project in case of contract award or date of
delivery in case of direct material supply order. This was
confirmed by HHIBulgaria through letter # D-0355 dated
20/08/2010.
SOUTH KOREA-Hongseong
Yes
JEUMONT SCHNEIDER
FRANCE
Yes
Page 16 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Koncar D&ST Inc.
FACTORY LOCATION
CROATIA-Zagreb
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter # 14-03217-1-30504401 dated May 18,
2014, it is pre-qualified for Power Transformer up to 67MVA,
132kV as confirming to National Grid SA specification #
53-TMSS-01, Rev.01 with the following conditions:
All Type, Special & Routine tests as per National Grid SA
Specifications shall be carried out on the first unit to be supplied
to National Grid SA in the Approved Independent Testing
Laboratory or in the manufacturers Testing Laboratory in
presence of three (03) National Grid SA Engineers & one (01)
Approved Independent Inspection Agency (IIA) Inspector. All
the costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer through their letter #
Nil, dated May 04, 2014.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) and from
the date of first delivery in case of direct material supply order
as confirmed by the manufacturer through their letter # Nil
dated May 04, 2014.
CROATIA-Zagreb
Yes
Page 17 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Liaoning - Efacec Electrical Equipment Co., Ltd
(LEEEC)
FACTORY LOCATION
CHINA-Liaoning Province
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
SUSPENDED for all SEC/National Grid SA ongoing and
forthcoming projects based on VP, Engineering letter #
13-07937-30504401 dated December 24, 2013.
JAPAN--
Yes
NISSIN ELECTRIC
JAPAN
Yes
Ukraine-Zaporizhia
Yes
Page 18 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Saudi Power Transformers Company (SPTC)
FACTORY LOCATION
Saudi Arabia-Dammam
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter # 15-04608-03-30504401 dated August
18, 2015, It is prequalified for Power Transformers up to 132 kV
, 100 MVA, with the following conditions:
As per the manufacturer letter # CEO/2015/009 dated
August 8, 2015, all type tests, routine tests and special tests
(including short circuit test) as per SEC/National Grid SA
standards/specifications shall be conducted on the proposed
power transformers rated up to 132 kV, 100 MVA for the first
project in an approved independent testing laboratory in the
presence of three (3) SEC/National Grid SA Engineers & one (1)
SEC/National Grid SA approved Independent Inspection Agency
(IIA) Inspector. All cost of which shall be borne by the
manufacturer.
Ten (10) years extended Warranty for the proposed Power
Transformers rated up to 132 kV, 100 MVA in respect of the
defects due to design, manufacturing, installation and
workmanship from the date of the Provisional Acceptance
Certificate (PAC) of the project (in case of contract award) and
from the date of delivery for the direct material supply order as
confirmed through the manufacturer letter # CEO/2015/008
dated August 8, 2015.
SC ELECTROPUTERE SA
Romania-Craiova
Yes
Page 19 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Schneider Enerji Endustrisi San VE TIC A.S
FACTORY LOCATION
TURKEY-Cayirova-Kocaeli
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter# 14-02364-1-30504401 dated April 01,
2014, it is pre-qualified for Power Transformers up to 67 MVA
and, 132 kV conforming to National Grid SA specification
53-TMSS-01, Rev. 01, with the following conditions:
All Type, Special & Routine tests as per National Grid SA
Specifications/Standards shall be carried out on the first unit to
be supplied to National Grid SA in the manufacturer Testing
Laboratory in the presence of three (03) National Grid SA
Engineers & one (01) National Grid SA approved Independent
Inspection Agency (IIA) Inspector. All costs of which shall be
borne by the manufacturer. This was confirmed in writing by
the manufacturer through their letter # MKT_132KV Trafo_005,
dated June 18, 2013.
Schneider Electric Transformer Factory - Cayirova, Istanbul,
Turkey has confirmed that improvement needs implementation
will be complied during the FAT for the first transformer order
confirmed through letter # MKT_132KV Trafo_010 dated
February 12, 2014.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed by the manufacturer through their letter #
MKT_132KV Trafo_007-1 dated March 19, 2014.
Siemens AG (Dresden)
GERMANY-Dresden
Yes
SIEMENS AG (NURNBERG)
GERMANY-NURNBERG
Yes
AUSTRIA- WEIZ
Yes
JAPAN--
Yes
WILSON TRANSF
AUSTRALIA-MELBOURNE
Yes
All type, special & routine tests for each voltage class as
per SEC specifications/standards shall be carried out on the first
batch to be supplied to SEC in securing an order in the presence
of three (3) SEC engineers & one (1) approved independent
inspection agency Inspector.
Total =
38
Page 20 of 244
SER
.4
1. 4. 1
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
230 KV PRIMARY
POWER TRANSFORMERS UP TO 400 MVA
Applicable Standards:
ABB
SWEDEN
Yes
ABB ( T& D)
United States-N/A
Yes
ABB Cordoba
SPAIN-Cordoba
Yes
53-TMSS-02
Page 21 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ABB Elektrik Sanayi A.S. [previously ABB ESAS]
FACTORY LOCATION
TURKEY-Istanbul/Kartal
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter# 14-02898/03-030504401 dated June
17, 2014, it is pre-qualified for Power Transformer up to 380kV,
250MVA as confirming to National Grid SA specification #
53-TMSS-02, Rev.01 with the following conditions:
All Type, Routine and Special testes as per NG
Specifications/Standards and IEC requirement together with
Thermal & Dynamic short-circuit calculations per IEC 60076-5
shall be carried out on the First unit to be supplied to SEC/NG of
Power Transformers in the Manufacturer's Testing Laboratory in
the presence of three (3) SEC/NG Engineers & one (1) SEC/ NG
approved Independent Inspection Agency (IIA) Inspector. All
costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer through their letter #
Nill dated February 04, 2013 .
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) and from
the date of first delivery in case of direct material supply order
as confirmed by the manufacturer through their letter #Nill
dated May 24, 2013.
ALSTOM Grid
TURKEY-Gebze
Yes
AREVA
GERMANY
Yes
CG POWER SYSTEMS
BELGIUM
Yes
DAIHEN CORPORATION
JAPAN-OSAKA
Yes
JAPAN--
Yes
HAWKER SIDDELEY
United Kingdom
Yes
HITACHI Ltd.
JAPAN--
Yes
Page 22 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
HYOSUNG (HICO)
Yes
HYUNDAI
Yes
SOUTH KOREA-Hongseong
Yes
REMARKS
Based on TS&SD fax#09-F01255/02-03032301 dated 25th.
July 2009, it is pre-qualified for Power Transformer up to
380kV, 500MVA as confirming to SEC specification #
53-TMSS-02, rev.0 with the following conditions:
MITSUBISHI
JAPAN--
Yes
Page 23 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Siemens AG (Dresden)
GERMANY-Dresden
Yes
SIEMENS AG (NURNBERG)
GERMANY-NURNBERG
Yes
AUSTRIA- WEIZ
Yes
JAPAN--
Yes
WILSON TRANSF
AUSTRALIA-MELBOURNE
Yes
All type, special & routine tests for each voltage class as
per SEC specifications/standards shall be carried out on the first
batch to be supplied to SEC in securing an order in the presence
of three (3) SEC engineers & one (1) approved independent
inspection agency Inspector.
Total =
.5
1. 5. 1
20
380KV PRIMARY
POWER TRANSFORMERS UP TO 500 MVA
Applicable Standards:
ABB
SWEDEN
Yes
ABB ( T& D)
United States-N/A
Yes
53-TMSS-02
Page 24 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ABB Cordoba
FACTORY LOCATION
SPAIN-Cordoba
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD letter# 09-F011657/03-03032301 dated
August 16, 2009. It is pre-qualified for Power Transformer up
to 380kV, 500MVA as confirming to SEC specification #
53-TMSS-02, rev.0 with the following conditions:
All type, design, special (exclude Short-Circuit Test) & routine
tests as per SEC Specifications/Standards together with
Thermal & Dynamic short-circuit calculations per IEC 60076-5
shall be carried out on the first unit to be supplied to SEC in an
accredited Independent Testing Laboratory or in the
manufacturer's testing laboratory in the presence of three (3)
SEC Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter # PPTR-002.2 dated
February 14, 2009 and the submitted "Confirmation Letter" #
Nil dated November 18, 2008. [this condition has been modified
based on S&SD letter# 12-0395-01-30504001 dated February
12, 2012]
Seven (7) years extended warranty from the date of PAC of
the First turnkey project in case of contract award or date of
the First delivery in case of direct material supply order. This
was confirmed in writing by the manufacturer through their
submitted "Guarantee/Warranty Certificate" # Nil dated May
25, 2009.
TURKEY-Istanbul/Kartal
Yes
Page 25 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ALSTOM Grid
FACTORY LOCATION
TURKEY-Gebze
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
First Unit to be Type Tested in the presence of 3 SEC Engineers
& 1 SEC approved Independent Inspector; Extended Warranty
of Six years.
Previously AREVA T&D-Turkey [The name has been changed
based on S&SD/P&SFD letter # 12-01064-30504401 dated
March 14, 2012].
AREVA
GERMANY
Yes
CG POWER SYSTEMS
BELGIUM
Yes
JAPAN--
Yes
HAWKER SIDDELEY
United Kingdom
Yes
HITACHI Ltd.
JAPAN--
Yes
HYOSUNG (HICO)
Yes
HYUNDAI
Yes
MITSUBISHI
JAPAN--
Yes
SIEMENS AG (NURNBERG)
GERMANY-NURNBERG
Yes
AUSTRIA- WEIZ
Yes
JAPAN--
Yes
2
2
.1
16
Page 26 of 244
SER
2. 1. 1
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
Applicable Standards:
ABB
Saudi Arabia-RIYADH
Yes
Saudi Arabia-RIYADH
Yes
REMARKS
51-TMSS-01
Yes
UP TO 1.5 MVA
KONCAR D&ST
Croatia/Hrvatska
Yes
Saudi Arabia-Riyadh
Yes
Saudi Arabia-DAMMAM
Yes
UP TO 13.8 KV ONLY
Saudi Arabia-Riyadh
Yes
WESCOSA
Saudi Arabia-DAMMAM
Yes
UP TO 13.8 KV ONLY
Total =
3
3
.1
3. 1. 1
Applicable Standards:
52-TMSS-01
Page 27 of 244
SER
4
4
.1
4. 1. 0
5
5
.1
5. 1. 1
.2
5. 2. 1
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
---
Yes
ABB
United States
Yes
ABB
Saudi Arabia-RIYADH
Yes
ABB ( T& D)
ITALY
Yes
ABB SECHERON
SWITZERLAND-GENEVA
Yes
CG POWER SYSTEMS
BELGIUM
Yes
CROMPTON GREAVES
INDIA
Yes
HYOSUNG (HICO)
Yes
HYUNDAI
Yes
REMARKS
ALL APPROVED POWER TRANSFOREMER MANUFACTURERS,
EXCEPT DISTRIBUTION TRANSFORMER MANUFACTURERS ARE
ALSO ACCEPTABLE FOR GROUNDING TRANSFORMERS
Total =
Total =
Total =
36 KV PRIMARY
36 KV PRIMARY
Applicable Standards:
ABB/AEIL
Saudi Arabia
Yes
SIEMENS
GERMANY
Yes
WESCOSA
Saudi Arabia-DAMMAM
Yes
COMPACT SUBSTATION
Applicable Standards:
SWITZERLAND-GENEVA
Yes
CG POWER SYSTEMS
BELGIUM
Yes
Applicable Standards:
Page 28 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ABB ( T& D)
FACTORY LOCATION
United States-N/A
Pre-Qualified
Manufacturers
By SEC
REMARKS
Yes
Total =
6
6
.1
6. 1. 1
REACTOR
Applicable Standards:
ABB
SWEDEN
Yes
ALSTOM Grid
TURKEY-Gebze
Yes
AREVA_(ST. QUEN)
FRANCE-(ST. QUEN)
Yes
BELGIUM-Mechelen
Yes
58-TMSS-01
JAPAN--
Yes
HITACHI Ltd.
JAPAN--
Yes
Page 29 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
HYOSUNG (HICO)
FACTORY LOCATION
KOREA, Republic of-Changwon
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-10289-02-30504401 dated 18
January 2015, the manufacturer is prequalified for Oil
Immersed Reactor up to 380 KV as conforming to National Grid
SA specification # 58-TMSS-01, Rev.01 with the following
conditions:
All type, special, routine tests for Oil Immersed Shunt
Reactors per National Grid SA specifications and IEC standards
& technical requirements shall be conducted at Manufacturer's
Testing Laboratory in presence of three (3) SEC/National Grid
SA engineers & one (1) company approved independent
inspection agency Inspector, at the sole expenses of
manufacturer on the first unit to be supplied to SEC/National
Grid SA. This was confirmed through their letter #
HS-SR-141027-01 dated October 27, 2014.
Ten (10) years extended warranty in respect of the defects
due to design, manufacturing, installation and workmanship
from the date of the Provisional Acceptance Certificate (PAC)
of the first turnkey project (in case of contract award) and from
the date of first delivery in case of direct material supply order
shall be provided as confirmed by the manufacturer and
subsequently reduced yearly in case of future project award
through their letter# HS-SRPQ-150107-01 dated January 7,
2015.
HYUNDAI
Yes
MITSUBISHI
JAPAN--
Yes
Page 30 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
PJSC Zaporozhtransformator (ZTR)
FACTORY LOCATION
Ukraine-Zaporizhia
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter# 13-07568-30504401 dated December
31, 2013, it is pre-qualified for Shunt Reactors rated up to 132
kV as conforming to National Grid SA specification #
58-TMSS-01, Rev.0, with the following conditions:
All Type, Special & Routine tests as per latest National Grid SA
Specifications/Standards & IEC requirements shall be carried
out on the first/next unit to be supplied to SEC/National Grid SA
in an Accredited Testing Laboratory in the presence of three (3)
National Grid SA Engineers & one (1) National Grid SA approved
Independent Inspection Agency (IIA) Inspector. All costs of
which shall be borne by the manufacturer. This was confirmed
in writing by the manufacturer through their letter 1/115-3553
dated December 14, 2011.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
1/115-3552 dated December 14, 2011.
SCHNEIDER ELECTRIC
TURKEY-Kocaeli
Yes
SIEMENS AG (NURNBERG)
GERMANY-NURNBERG
Yes
AUSTRIA- WEIZ
Yes
JAPAN--
Yes
6. 1. 2
Applicable Standards:
ABB
SWEDEN
Yes
ABB ( T& D)
United States-N/A
Yes
ALSTOM Grid
TURKEY-Gebze
Yes
AREVA_(ST. QUEN)
FRANCE-(ST. QUEN)
Yes
14
58-TMSS-01
Page 31 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
CG Power Systems Belgium NV
FACTORY LOCATION
BELGIUM-Mechelen
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter# 14-08521-2-30504401 dated December
10, 2014, it is pre-qualified for Shunt Reactors rated up to
132kV as conforming to National Grid SA specification #
58-TMSS-01, Rev.1, with the following conditions:
All Type, Special & Routine tests as per latest National Grid SA
Specifications/Standards & IEC requirements [excluding Short
circuit test ] shall be carried out on the first unit to be supplied
to SEC/National Grid SA in the manufacturer Laboratory in the
presence of three (3) National Grid SA Engineers & one (1)
National Grid SA approved Independent Inspection Agency
(IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter #Nil dated November 10,
2012.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order.
This was confirmed in writing by the manufacturer through their
letter #Nil dated 25 November 2014.
JAPAN--
Yes
HITACHI Ltd.
JAPAN--
Yes
Page 32 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
HYOSUNG (HICO)
FACTORY LOCATION
KOREA, Republic of-Changwon
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-10289-02-30504401 dated 18
January 2015, the manufacturer is prequalified for Oil
Immersed Reactor up to 380 KV as conforming to National Grid
SA specification # 58-TMSS-01, Rev.01 with the following
conditions:
All type, special, routine tests for Oil Immersed Shunt
Reactors per National Grid SA specifications and IEC standards
& technical requirements shall be conducted at Manufacturer's
Testing Laboratory in presence of three (3) SEC/National Grid
SA engineers & one (1) company approved independent
inspection agency Inspector, at the sole expenses of
manufacturer on the first unit to be supplied to SEC/National
Grid SA. This was confirmed through their letter #
HS-SR-141027-01 dated October 27, 2014.
Ten (10) years extended warranty in respect of the defects
due to design, manufacturing, installation and workmanship
from the date of the Provisional Acceptance Certificate (PAC)
of the first turnkey project (in case of contract award) and from
the date of first delivery in case of direct material supply order
shall be provided as confirmed by the manufacturer and
subsequently reduced yearly in case of future project award
through their letter# HS-SRPQ-150107-01 dated January 7,
2015.
HYUNDAI
Yes
MITSUBISHI
JAPAN--
Yes
Page 33 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
PJSC Zaporozhtransformator (ZTR)
FACTORY LOCATION
Ukraine-Zaporizhia
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter# 13-07568-30504401 dated December
31, 2013, it is pre-qualified for Shunt Reactors rated up to
132kV as conforming to National Grid SA specification #
58-TMSS-01, Rev.0, with the following conditions:
All Type, Special & Routine tests as per latest National Grid SA
Specifications/Standards & IEC requirements shall be carried
out on the first/next unit to be supplied to SEC/National Grid SA
in an Accredited Testing Laboratory in the presence of three (3)
National Grid SA Engineers & one (1) National Grid SA approved
Independent Inspection Agency (IIA) Inspector. All costs of
which shall be borne by the manufacturer. This was confirmed
in writing by the manufacturer through their letter 1/115-3553
dated December 14, 2011.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
1/115-3552 dated December 14, 2011.
SIEMENS AG (NURNBERG)
GERMANY-NURNBERG
Yes
AUSTRIA- WEIZ
Yes
JAPAN--
Yes
6. 1. 3
Applicable Standards:
14
58-TMSS-01
ABB
SWEDEN
Yes
ABB ( T& D)
United States-N/A
Yes
ALSTOM Grid
TURKEY-Gebze
Yes
AREVA_(ST. QUEN)
FRANCE-(ST. QUEN)
Yes
JAPAN--
Yes
HITACHI Ltd.
JAPAN--
Yes
Page 34 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
HYOSUNG (HICO)
FACTORY LOCATION
KOREA, Republic of-Changwon
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-10289-02-30504401 dated 18
January 2015, the manufacturer is prequalified for Oil
Immersed Reactor up to 380 KV as conforming to National Grid
SA specification # 58-TMSS-01, Rev.01 with the following
conditions:
All type, special, routine tests for Oil Immersed Shunt
Reactors per National Grid SA specifications and IEC standards
& technical requirements shall be conducted at Manufacturer's
Testing Laboratory in presence of three (3) SEC/National Grid
SA engineers & one (1) company approved independent
inspection agency Inspector, at the sole expenses of
manufacturer on the first unit to be supplied to SEC/National
Grid SA. This was confirmed through their letter #
HS-SR-141027-01 dated October 27, 2014.
Ten (10) years extended warranty in respect of the defects
due to design, manufacturing, installation and workmanship
from the date of the Provisional Acceptance Certificate (PAC)
of the first turnkey project (in case of contract award) and from
the date of first delivery in case of direct material supply order
shall be provided as confirmed by the manufacturer and
subsequently reduced yearly in case of future project award
through their letter# HS-SRPQ-150107-01 dated January 7,
2015.
HYUNDAI
Yes
MITSUBISHI
JAPAN--
Yes
SIEMENS AG (NURNBERG)
GERMANY-NURNBERG
Yes
AUSTRIA- WEIZ
Yes
JAPAN--
Yes
6. 1. 4
Applicable Standards:
12
58-TMSS-01
Page 35 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
ABB
SWEDEN
Yes
ABB ( T& D)
United States-N/A
Yes
ALSTOM Grid
TURKEY-Gebze
Yes
REMARKS
FRANCE-(ST. QUEN)
Yes
JAPAN--
Yes
HITACHI Ltd.
JAPAN--
Yes
Page 36 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
HYOSUNG (HICO)
FACTORY LOCATION
KOREA, Republic of-Changwon
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-10289-02-30504401 dated 18
January 2015, the manufacturer is prequalified for Oil
Immersed Reactor up to 380 KV as conforming to National Grid
SA specification # 58-TMSS-01, Rev.01 with the following
conditions:
All type, special, routine tests for Oil Immersed Shunt
Reactors per National Grid SA specifications and IEC standards
& technical requirements shall be conducted at Manufacturer's
Testing Laboratory in presence of three (3) SEC/National Grid
SA engineers & one (1) company approved independent
inspection agency Inspector, at the sole expenses of
manufacturer on the first unit to be supplied to SEC/National
Grid SA. This was confirmed through their letter #
HS-SR-141027-01 dated October 27, 2014.
Ten (10) years extended warranty in respect of the defects
due to design, manufacturing, installation and workmanship
from the date of the Provisional Acceptance Certificate (PAC)
of the first turnkey project (in case of contract award) and from
the date of first delivery in case of direct material supply order
shall be provided as confirmed by the manufacturer and
subsequently reduced yearly in case of future project award
through their letter# HS-SRPQ-150107-01 dated January 7,
2015.
HYUNDAI
Yes
MITSUBISHI
JAPAN--
Yes
SIEMENS AG (NURNBERG)
GERMANY-NURNBERG
Yes
AUSTRIA- WEIZ
Yes
JAPAN--
Yes
.2
12
Page 37 of 244
SER
6. 2. 1
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
Applicable Standards:
FINLAND-Tampere
Yes
REMARKS
52-TMSS-02,58-TMSS-02
Based on S&SD letter # 14-03642-01-30504401 dated June 11,
2014, NOKIAN ALSTOM Grid oy Ltd. Tampere- Finland is
pre-qualified for Air Core Series Reactors up to 145 kV as
confirming to National Grid SA Specification # 58-TMSS-02,
Rev.01 with the following condition:
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order. This was
confirmed by the manufacturer through their letter # Nil, dated
20th June 2012.
Yes
AUSTRIA-Leonding, Linz
Yes
TRENCH CANADA
CANADA-Scarborough, Ontario
Yes
7
7
.1
7. 1. 1
SWITCHGEARS
Applicable Standards:
ABB ( T& D)
United States-N/A
32-TMSS-01
Yes
Page 38 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ABB/AEIL
FACTORY LOCATION
Saudi Arabia
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
For 33kV AIS:
classic ZS3 type with current rating up to 2500A@ 40C; CB
type VD43620-25(2000A), VD43612-25(1250A & 800A); ES
type EK5, 3007N280.
For 13.8kV AIS:
The remark was modified based on S&SD Letter
13-01329-30504401 dated March 13, 2013.
13.8kV switchgear type UniGear ZS1 (CT on upper & lower
side of CB) with rated current of incomer, Bus Section, Bus
Riser 3003A and 1756A, Out Going Feeder with rated current
924A and 682A @ 40C, 60Hz, 25kA (3s).
Out Going Feeder (CT on lower side of CB) with rated current
991A and 648A @ 40C, 60Hz, 25kA (3s).
CB types (VD4 embedded pole): VD4 17.31-25 (interrupter
VG6), ABB Italy and VD4 17.16-25 (interrupter VG4/S), VD4
17.12-25 (interrupter VG4) & VD4 17.06-25 (interrupter VG4),
ABB, Italy.
Circuit breaker for Capacitor bank back to back switching
(BC2-630A); VD4 17.12-40 (interrupter VG6), HD4 17.12-25
(interrupter SF6), HD4 24.12-25 (interrupter SF6), and (BC2900A); HD4 17.16-25 (interrupter SF6) ABB, Italy.
All VD4 Poles and Interrupters are from ABB Calor Emg,
Germany (DECMS).
EL Operating Mechanism form ABB-SACE Italy (ITABB).
Earthing switch type EK6, ABB-EJF, Czech.
CT & VT: ABB-EJF, Czech or WTW make, Germany
Old version: Classic ZS1.
GERMANY-CALOR EMAG
Yes
Page 39 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
AEL -SIEMENS
Saudi Arabia-JEDDAH
Yes
Saudi Arabia-RIYADH
Yes
FRANCE-(MACON CEDEX 9)
Yes
EFACEC
PORTUGAL
Yes
ELEKTROBUDOWA SA
Poland-Konin
Yes
Page 40 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
EPS LTD. (GROUPE SCHNEIDER)
FACTORY LOCATION
Saudi Arabia-RIYADH
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
For 13.8kV AIS:
Pre-qualified since 24/02/1420H for 13.8kV SWG type MC-Set
with CB type LF3-3150-(2500A), LF2- 2500 (2000A), LF2-1250
(800A), LF2-630 (400A) and warranty of (7)years from
commissioning date of the first delivery for any onward project
or order in the first two years and then shall be (3)years from
PAC.
Based on S&SD Letter 12-02860-01-30504401 dated July 24,
2012, 13.8kV MC-Set AIS is pre-qualified for current rating
3600A @ 40C, 60Hz with forced cooling, with the following
dimensions of the panels:
Incomer
(90017002500), CB-LF3,
Interrupter-LF3-3150A
Bus section
(90017002500), CB-LF3,
Interrupter-LF3-3150A
Bus riser
(90017002500)
For 33kV AIS:
Based on TS&SD fax ref. #09-00073-2-03032301 dated
04/02/2009. Pre-Qualified for 34.5 kV SWG type
(F400NL)1250/2500 A @40C &60Hz with IP4X,SF6 CB type
SF2(France),ES type TFCM(France), & (10)years warranty.
Old version:
33kV AIS type F400G with current rating up to 2500A @ 40C
with CB type SF & SF2
JAPAN--
Yes
HITACHI Ltd.
JAPAN--
Yes
KONCAR
Croatia/Hrvatska
Yes
Page 41 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
LSIS
FACTORY LOCATION
KOREA, Republic of-Cheongju
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 15-03781-2-30504401 dated June 04,
2015, the manufacturer is prequalified to supply MV switchgear
Type Solution Power V17 rated 13.8 kV only, with the
following conditions:
Ten (10) years extended Warranty from the date of the
Provisional Acceptance Certificate (PAC) of the project (in case
of contract award) or from the date of delivery for the direct
material supply order, as confirmed through the manufacturer
letter # 013/LSIS-PQ/2015 dated May 26, 2015.
Incomer, Bus Section and Bus Riser ratings
(W-950xD-2000xH-2620 mm); 3000A @ 40C, 60Hz, 25kAp
(3s) / 65kAp, natural cooled.
Outgoing feeder & Capacitor feeder (630 A / 1250A) (W-750xD-2000xH-2620 mm); 1250A @ 40C, 60 Hz, 25kA (3s)
/ 65kAp, natural cooled.
Circuit Breaker:
Incomer & Bus section: LSIS, Korea Type
(LVB-17M-40D/30-1E2H, Interrupter: LV10403, Opr. Mech:
Motor-spring, LVB Pro-MEC)
Outgoing feeder: LSIS, Korea-Type (LVB-17M-25D/12-1E2H,
Interrupter: LV10252, Opr. Mech: Motor-spring, LVB Pro-MEC)
Capacitor feeder: LSIS, Korea-Type
(LVB-17M-25D/12-1E2H-DB, Interrupter: LV12503, Opr. Mech:
Motor-spring, LVB Pro-MEC), Capacitor Bank back to back
switching current-630A.
Earthing switch Type SEH/MH31SM & SEH/MH31M.
CT: ABB, Czech (CT located in upper & lower side of CB for
I/C, O/G, B/S).
VT: ABB, Czech.
MITSUBISHI
JAPAN--
Yes
POWER CON
United States
Yes
S&C
United States
Yes
SIEMENS
United States
Yes
JAPAN--
Yes
VA TECH
FRANCE
Yes
WESCOSA
Saudi Arabia-DAMMAM
Yes
Total =
20
Page 42 of 244
SER
7. 1. 2
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
Applicable Standards:
ABB
GERMANY
Yes
REMARKS
32-TMSS-02
Old Version:
145kV GIS type ELK-04 with CB type ELK-SW04, Hydraulic
spring mechanism; DS type ELK-TE0 (3 POS), MES type ELK-TE0
(3 POS)/ TE03-DR04; HES type ELK-EB03.
New Version:
Based on TS&SD letter # 11-00455-5-03032301 dated April 04,
2011, the new version 145kV GIS type ELK-04 with CB type
ELK-CB0 (Hydraulic Spring Mech. HMB-1), DS type
ELK-DE0-3POS, MES type ELK-DE0, HSES type ELK-ES0 (Motor
Spring Mech.) is pre-qualified as conforming to SEC specification
# 32-TMSS-02, Rev.01 with the following condition:
Ten (10) Years Extended Guarantee/Warranty from the date
of PAC of project (in case of contract award) and from date of
delivery for the direct material supply order. This was confirmed
in writing by ABB Germany via their letter # PTPH/GVS.Nb,
10_year-warranty.doc dated May 14, 2010.
CB Capability for:
Inductive load switching: YES
Capacitor bank back to back Switching: YES
ABB
SWITZERLAND
Yes
CB Capability for:
Inductive load switching: NO
Capacitor bank back to back Switching: NO
Page 43 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ALSTOM Grid AG
FACTORY LOCATION
SWITZERLAND-Oberentfelden
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
New version:
Based on S&SD letter# 13-4433-01-30504401, dated 16
January 2013, it is pre-qualified for 145kV GIS type F35 with
rated current, 3150A @40C, 60Hz, CB type- F35-CB4 / Opr.
Mech: FK3-2 (spring charged), Line & Busbar DS-F35-DES-4/
Opr. Mech: ME1-3, MES-F35-DES-4/ Opr. Mech: ME1-3,
HES-F35-EFZ/Opr. Mech:MF-3 (spring charged), CT-F35-CT4,
against specification # 32-TMSS-02, Rev.1 with the following
condition:
1. Eight (8) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery of direct material supply order. This was
confirmed through manufacturer lletter ref: Q1F35_210409
dated 21 April 2009.
CB Capability for:
Inductive load switching: YES
Capacitor bank back to back Switching: YES
Old Version:
145kV GIS type B65 with CB type B65-CB Motor spring
mechanism; DS type B65-DS; ES type B65-ES; HES type
B65-EF.
Previously " Areva T &D AG, SWITZERLAND-Oberentfelden ",
the name has been changed to ALSTOM Grid AG,
Oberentfelden, Switzerland, based on ALSTOM Grid Letter # Nil
dated July 11, 2012.
FUJI Electric Co.
JAPAN--
Yes
Page 44 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
HITACHI Ltd.
FACTORY LOCATION
JAPAN--
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213,
dated 13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
New version: 145kV GIS type CFTA with CB type
CFPT-120-40L, FAR3 Motor spring mechanism; DS type
CFL-120; ES type CFL-120.
CB Capability for:
Inductive load switching: NO
Capacitor bank back to back Switching: NO
Yes
Page 45 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
HYUNDAI
FACTORY LOCATION
KOREA, Republic of-Ulsan
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
New version: 145kV GIS type 145SP-1 with CB type 145SP-K1
Motor spring mechanism; BDS type 145SP-3PS1; LDS type
145SP-3PS2; MES type 145-3PS2; HES type 145SP-LES2.
CB Capability for:
Inductive load switching: YES
Capacitor bank back to back Switching: NO
Old version: 145kV GIS type 145SP with CB type 145SP-K
Hydraulic mechanism; DS type 145SP-DS; MES type 145SP-ES;
HES type 145SP-LES
CB Capability for:
Inductive load switching: NO
Capacitor bank back to back Switching: NO
KONCAR
Croatia/Hrvatska
Yes
SOUTH KOREA-Cheongju
Yes
Page 46 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
MITSUBISHI
FACTORY LOCATION
JAPAN--
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
New version 145kV GIS type 100GMKD with CB type
120-SFMT-40CJ; DS type 120GRD/GLD; MES type
120GRED/GRE; HES type 120 GRED/GRE-A.
Old version: 145kV GIS 120GMKM with CB type 120-SFMT-40,
Pneumatic mechanism; DS type 120-GR-20,
120-GL-20; MES type 120-GRE, 120-GREC; HES type
120-GREA.
Old version: 145kV GIS 100GMKD with CB type 120-SFMT-40CE
Motor spring mechanism; DS type 120GLD; HES type 120-GREA.
CB Capability for:
Inductive load switching: YES
Capacitor bank back to back Switching: NO
SIEMENS
FRANCE-GRENOBLE
Yes
New version:
145kV GIS type TH7m with CB type TH7m AF8ER(Motor spring);
BDS type CM002, CM003 (3-position); LDS type CM002, CM003
(2-position); MES type CM002,CM003; HES type CM002,
CM003.
Old version: 145kV GIS type HEXABOLIC-TH7 with CB type
DTH7 Hydraulic mechanism; BDS type SITH7; LDS type ITH7, SI
TH7; ES type ST TH7.
CB Capability for:
Inductive load switching: NO
Capacitor bank back to back Switching: NO
Page 47 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SIEMENS
FACTORY LOCATION
GERMANY
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter# 15-06390-02-30504401 dated August
13, 2015,it is pre-qualified for 145kV GIS type 8DN8-5 with
rated current, 3150A, 60Hz,
CB type- 8DN8-5 / Opr. Mech. Type: FA2 (spring charged),
LDS type- 8DN8-5-3PS / Opr. Mech: Motor,
BDS type- 8DN8-5-3PS / Opr. Mech: Motor,
MES type- 8DN8-5-ES / Opr. Mech: Motor,
HES type- 8DN8-5-HES / Opr. Mech:Motor spring
As conforming to the specification #32-TMSS-02, Rev.01 with
the following conditions:
- Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order &
subsequently reduced yearly in case of future project. This was
confirmed in writing by the manufacturer through their letter #
Nil dated May 30, 2012.
- CB Capability for:
Inductive load switching: YES
Capacitor bank back to back Switching: No
Short line fault: Minimum 5.2m length bus duct between feeder
Bay and OHL shall be used in case the bay is directly connected
to OHL lines.
Old Remark
New version: 145kV GIS type 8DN8-II with CB type 8DN8 Motor
spring mechanism; DS type 8DN8; ES type 8DN8.
Old version: 145kV GIS type 8DN8 with CB type 8DN6(P1)
Motor spring mechanism; DS type 8DN8; ES type 8DN8.
CB Capability for:
Inductive load switching: NO
Capacitor bank back to back Switching: NO
TOSHIBA CORPORATION, T&D
JAPAN--
Yes
13
Page 48 of 244
SER
7. 1. 3
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
230 KV -GIS
Pre-Qualified
Manufacturers
By SEC
Applicable Standards:
ABB
SWITZERLAND
Yes
REMARKS
32-TMSS-02
Based on S&SD letter # 14-00064-30504101 dated January 26,
2014 and ABB Letter # PPHV-300GIS CH-05 dated February 02,
2014, the designation has been corrected to the following:
230 kV GIS Type: ELK-14/300 (1HC0071250M0040), Rated
current: 4000A, 40C, @ 60Hz, CB Type: ELK-SP14/300
(1HC0071250M0040) / Opr. Mech: HMB4 (1HC0071250M0040),
LDS & BDS Type: ELK-TK14/300 (1HC0071250M0040) / Opr.
Mech: BAC (1HC0071250M0040), MES Type: ELK-TK14/300
(1HC0071250M0040) / Opr. Mech: BAC (1HC0071250M0040),
HES Type: ELK-EB14/300 (1HC0071250M0040) / Opr. Mech:
BAE (1HC0071250M0040), CT Type: ELK-CN14/300
(1HC0071250M0040), Cable compartment Type: ELK-HK 14/300
(1HC0071250M0040).
Capacitor Bank Back to Back switching type test will be
performed when required in the project, confirmed by ABB
letter # PPHV-140120/GIS-1, dated 21-01-2014.
Old Designation:
230kV GIS Type: ELK-1, CB Type: ELK SP2-1.
FRANCE-AIX-LES BAINS
Yes
JAPAN--
Yes
HITACHI Ltd.
JAPAN--
Yes
MITSUBISHI
JAPAN--
Yes
Page 49 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SIEMENS
FACTORY LOCATION
GERMANY-Berlin
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Old Version
SIEMENS
GERMANY-Berlin
Yes
SIEMENS
FRANCE-GRENOBLE
Yes
JAPAN--
Yes
7. 1. 4
380 KV - GIS
Applicable Standards:
32-TMSS-02
Page 50 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ABB
FACTORY LOCATION
SWITZERLAND
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 13-00748-30504101 dated November
06, 2013, it is pre-qualified for 420 kV GIS type ELK-3/420
(1HC0071250M0070) @ 4000A, 60Hz, CB type ELK-SP3/420,
Operating Mechanism-HMB8, Line & Busbar DS type
ELK-TK3/420, Operating Mechanism-ELK-BAC, MES type
ELK-TK3/420, Operating Mechanism-ELK-BAC, HES type
ELK-EB3 420, Operating Mechanism-ELK-BAE, CT type ELK-CN3,
Cable compartment type ELK-HK3.
HYBRID GIS:
Base on S&SD letter # 14-03182-01-30504401, dated
29-01-2015, Pre-qualified ABB, Switzerland GIS type ELK-3/420
(1HC0071250M0070) with its components are acceptable for
Hybrid GIS up to current rating @ 3150A, 55C, 60Hz.
ALSTOM Grid SAS
FRANCE-AIX-LES BAINS
Yes
HITACHI Ltd.
JAPAN--
Yes
Page 51 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
HYOSUNG (HICO)
FACTORY LOCATION
KOREA, Republic of-Changwon
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD letter # 10-F-02299/02-03032301 dated
25/10/2010, it is pre-qualified for 420kV GIS type HSG 426A,
63kA, CB (Single Break) type HCHY 426A with Hydraulic
Mechanism, Busbar DS type HDMO 426A, Line DS type HDMO
426B,ES type HEMO 426A&H-ES type HEMS 426A as
confirming to SEC specification # 32-TMSS-02,Rev.01, with the
following conditions:
HYUNDAI
Yes
MITSUBISHI
JAPAN--
Yes
SIEMENS
FRANCE-GRENOBLE
Yes
SIEMENS
United Kingdom-HEBBUM
Yes
Page 52 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SIEMENS
FACTORY LOCATION
GERMANY
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
New version:
550kV GIS type 8DQ1 with CB type 8DQ1-P2; DS type 8DQ1;
ES type 8DQ1. with the following conditions:
- ten (10) years extended warranty from the date of
Provisional Acceptance Certificate (PAC) of the Turnkey project
(In case of contract award) and from the date of delivery for
the direct material supply order. The guarantee/warranty shall
cover all the cost of materials and labor as per
warranty/guarantee of materials and workmanship and
subsequently reduced yearly in case of future project award,
as confirmed by Siemens letter # Nil, dated 31-03-2009.
- Type test: 1000A capacitor bank back to back switching
current test to be performed in the first order before delivery
of the GIS in the project as per Siemens letter # E T HP
GS/SAR/PQ-GIS 8DQ1-NG 87, dated 06-05-2014.
HYBRID GIS:
Base on S&SD letter # 15-05204-01-30504401, dated
28-01-2015, Pre-qualified Siemens, Germany 550kV GIS type
8DQ1 with its components are acceptable for Hybrid GIS up to
current rating 3150A, 55 C, 60Hz.
Old version:
420kV GIS type 8DQ1 with CB type 8DQ1-T2, DOUBLE BREAK,
Hydraulic mechanism; DS type 8QD1
Page 53 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Siemens AG
FACTORY LOCATION
GERMANY-Berlin
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter# 14-00569-2-30504401 dated February
09, 2014,it is pre-qualified for 420KV GIS, type 8DQ1-6, 63KA,
Single Break with rated current 4000A, 60Hz, CB type-8DQ1
6-P1 (Single break)/ Opr. Mech. Type: Spring type (FA5), LDS
type- 8DQ1 6 DS / Opr. Mech: Motor, BDS type-8DQ1 6 DS /
Opr. Mech: Motor, MES type- 8DQ1 6 ES / Opr. Mech: Motor,
HES type- 8DQ1 6 HSES /Opr. Mech: Motor spring & CT- 8DQ1
6 against specification # 32-TMSS-02, Rev.1 with the following
condition:
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order.
This was confirmed in writing by the manufacturer (Siemens
AG-Germany) through their letter # Nil dated May 30, 2012.
HYBRID GIS:
Base on S&SD letter # # 15-05204-01-30504401, dated
28-01-2015, Pre-qualified Siemens, Germany 420 kV GIS type
8DQ1-6 with its components are acceptable for Hybrid GIS up
to current rating 3150A, 55 C, 60Hz.
Page 54 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
TOSHIBA CORPORATION, T&D
FACTORY LOCATION
JAPAN--
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-05807-2-30504401, dated
September 08, 2014, it is pre-qualified for 420 kV GIS type GID,
Rated current 3150A @ 40 C, 60Hz, 63kA (1s).
CB type GSRK-420CHK (Single break) with internal grading
capacitor 860pF, Operating Mechanism: Hydraulic
GSRK-420CHK, Busbar & Line DS type DTM, Operating
Mechanism DTM (motor), MES type EBM, Operating Mechanism
EBM (motor), HES type EYP, Operating Mechanism EAP (motor
spring charged) as confirming to National Grid SA Specification
# 32-TMSS-02, Rev.01, With following condition:
Ten (10) years extended warranty from the date of
Provisional Acceptance Certificate (PAC) of the Turnkey project
(In case of contract award) and from the date of delivery for
the direct material supply order. The guarantee/warranty shall
cover all the cost of materials and labor as per
warranty/guarantee of materials and workmanship and
subsequently reduced yearly in case of future project award.
This was confirmed by the manufacturer through their letter #
TSB/TDS/AK/130206/2145-R1 dated August 12, 2014.
Old version: 420kV GIS type GID with CB type GSR
400R2B/GSRK, DOUBLE BREAK, Hydraulic mechanism.
550 KV GIS
11
Applicable Standards:
Page 55 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ABB
FACTORY LOCATION
SWITZERLAND
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letters 14-00741-30504101dated December 08,
2014 & 14-00043-30504101, dated January 20, 2015, it is
pre-qualified for 550 kV GIS type ELK-3/550
(1HC0071250M0100) @ 4000A, 40 C, 60Hz, CB type
ELK-SP3/550 (1HC0071250M0100), Operating Mechanism-HMB8
(1HC0071250M0100), Busbar DS type ELKTE3/550(1HC0071250M0100), Operating
Mechanism-DH(1HC0071250M0100), Line disconnector type
ELK-TV3/550(1HC0071250M0100), Operating
Mechanism-DH(1HC0071250M0100), MES type
ELK-EM3/550(1HC0071250M0100), Operating
Mechanism-DH(1HC0071250M0100), HES type
ELK-EB3/550(1HC0071250M0100), Operating
Mechanism-DB(1HC0071250M0100), Cable compartment type
ELK-HK3/550(1HC0071250M0100) as confirming SEC
Specification 32-TMSS-02, Rev.01 with following condition:
- Ten (10) years Extended Warranty from the date of
Provisional Acceptance Certificate (PAC) of the project (in case
of contract award) and from date of delivery for the direct
material supply order. The warranty/ guarantee shall cover all
cost of materials and labor as per warrant/guarantee of
materials and workmanship and subsequently reduced yearly in
case of future project and shall be applicable for all Substations
to be supplied to SEC/National Grid SA as confirmed through
ABB, Switzerland Letter # PPHV-550kV dated 02-05-2014.
Page 56 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
HYOSUNG (HICO)
FACTORY LOCATION
KOREA, Republic of-Changwon
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letters 14-00743-30504101 dated December
08, 2014 & 14-00783-30504101, dated 23 December, 2014, it
is pre-qualified for 550 kV GIS type 550 HSG @ 4000A, 40 ? C,
60Hz, CB type 550 SPR50, Operating Mechanism-HOM-110,
Busbar and Line DS type 550 SDSV, Operating
Mechanism-Motor/DYA0400134, MES type 550 SESM, Operating
Mechanism-Motor DYA0400134, HES type 550 HESA, Operating
Mechanism-Motor-Spring/DYA0400133, Cable compartment
type as confirming SEC Specification 32-TMSS-02, Rev.01 with
following conditions:
- Ten (10) years Extended Warranty from the date of
Provisional Acceptance Certificate (PAC) of the project (in case
of contract award) and from date of delivery for the direct
material supply order. The warranty/ guarantee shall cover all
cost of materials and labor as per warrant/guarantee of
materials and workmanship and subsequently reduced yearly in
case of future project and shall be applicable for all Substations
to be supplied to SEC/National Grid SA as confirmed by M/s.
HYOSUNG, Korea through Letter # Nil, dated Nil.
- Type test: 1000A capacitor bank back to back switching
current test to be performed in the first order before delivery
of the GIS in the project vide Hyosung, Korea letter #
HS-5GIS-1406-1, dated 11-06-2014.
SIEMENS
GERMANY
Yes
7. 1. 6
33 KV GIS
Applicable Standards:
Page 57 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SIEMENS
FACTORY LOCATION
GERMANY
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 15-0186-01-30504401, dated January
22, 2015 and TS&SD Letter # 10-02461-02-03032301, dated
August 31, 2010, the manufacturer is prequalified for 36kV GAS
Insulated Medium Voltage SWGR Type 8DA10, rated current
2500A @ 40C, 60Hz and short time current rating of
25kA(3sec),
CB type 3AH49 with vacuum interrupter type VSG 40040 (rated
current up to 2500A, 40C, 60Hz & Capacitor bank back to back
switching current 400A),
CB type 3AH49 with vacuum interrupter type VS 30040 (40kA)
for current rating up to 2375A C, 60Hz,
as conforming to National Grid SA specification # 32-TMSS-03,
Rev.0 with the following condition:
Seven (7) years extended warranty for the proposed 36kV
GIS ,type 8DA10 from the date of PAC of the turnkey project in
case of contract award or date of delivery in case of direct
material supply order. This was confirmed by Siemens trough
letter # 8DA10_PQR_R1 dated 24/08/2010.
Total =
8
8
.1
8. 1. 0
BATTERY EQUIPMENT
Applicable Standards:
BAE BERLINER BATTERIE FABRIK- G
GERMANY
Yes
C&D
United States
Yes
CEAC
FRANCE
Yes
ENERSYS S.A.R.L.
FRANCE--
Yes
EXIDE
United States
Yes
FIAMM
ITALY
Yes
GOULD (GNB)
United States
Yes
HOPPECKE
GERMANY
Yes
SLOVENIA
Yes
United Kingdom
Yes
VARTA
GERMANY
Yes
46-TMSS-01
Page 58 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
YUASA
.2
8. 2. 0
.3
8. 3. 0
FACTORY LOCATION
JAPAN
Pre-Qualified
Manufacturers
By SEC
REMARKS
Yes
Total =
12
Total =
11
Applicable Standards:
FRANCE--
Yes
C&D
United States
Yes
United Kingdom
Yes
FIAMM
ITALY
Yes
GNB
United States
Yes
HAWKER LTD.
United Kingdom
Yes
HOPPECKE
GERMANY
Yes
SAB
GERMANY
Yes
SEC
United States
Yes
VARTA
GERMANY
Yes
YUASA EXIDE
United States
Yes
46-TMSS-04
originally was SAFT Power System SAS-France
Applicable Standards:
46-TMSS-06
ALCAD
SWEDEN
Yes
FRANCE-Lyon
Yes
EMISA
SPAIN
Yes
EXIDE
United States
Yes
FRIWO
GERMANY
Yes
GERMANY-Zwickau
Yes
Page 59 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
GNB
United States
Yes
SAFT-NIFE
SWEDEN
Yes
VARTA HAWKER
GERMANY
Yes
REMARKS
370 TO 1390AH
Total =
.4
8. 4. 1
BATTERY CHARGER
BATTERY CHARGER
Applicable Standards:
46-TMSS-02
FRANCE--
Yes
BENNING
FRANCE
Yes
GERMANY--
Yes
BORRI S.P.A
ITALY-Arezzo
Yes
Ten (10) years warranty from the date of PAC of the turnkey
project in case of contract award or date of delivery in case of
direct material supply order. This has been confirmed in writing
by the manufacturer through letter # Nil dated May 23, 2011.
BRAGA MORO
ITALY
Yes
Page 60 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
C&D
United States
Yes
CEG
ITALY-BIBIENA
Yes
REMARKS
FRANCE-Lyon
Yes
FRANCE-Lyon
Yes
SPAIN
Yes
ERSKINE
United Kingdom
Yes
EXIDE
United States
Yes
SWITZERLAND
Yes
SPAIN-Lasarte-Oria
Yes
Page 61 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Statron AG
FACTORY LOCATION
SWITZERLAND-Maegenwil
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter 12-03254-01-30504401 dated August
29, 2012, it is pre-qualified for Battery Chargers 125V DC
(Models BDT) as conforming to SEC Specification #
46-TMSS-02, Rev.0 with the following conditions:
All Type, Routine and Special testes shall be carried out on
the first batch of each types of Battery Chargers 125V DC in an
Independent Testing Laboratory in the presence of three (3)
SEC Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer Statron AG through their letter # bm dated
August 13, 2012.
Ten (10) years extended warranty in respect of defects due
to design, manufacturing, installation and workmanship from
the date of PAC of the first turnkey project (in case of contract
award) or from the date of first delivery of direct material
supply order as confirmed by the manufacturer Statron AG
through their letter # bm dated August 13, 2012.
Total =
8. 4. 2
Applicable Standards:
BORRI S.P.A
ITALY-Arezzo
Yes
15
46-TMSS-03
Based on S&SD Letter # 14-03226-01-030504401 dated June
4, 2014, it is pre-qualified for UPS, 5 THROUGH 100 kVA as
conforming to National Grid SA specification # 46-TMSS-03,
Rev.0 with the following conditions:
Ten (10) years warranty from the date of PAC of the turnkey
project in case of contract award or date of delivery in case of
direct material supply order. This has been confirmed in writing
by the manufacturer through letter # Nil dated May 23, 2011.
Page 62 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
BRAGA MORO
FACTORY LOCATION
ITALY
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter 12-03794-01-30504401 dated November
18, 2012, Braga Moro- Italy is pre-qualified for UPS as
conforming to National Grid SA Specification # 46-TMSS-03,
Rev.0, with the following conditions:
All Type, Routine and Special testes as per National Grid SA
Specifications/Standards together shall be carried out on the
First unit to be supplied to SEC/National Grid SA of UPS in an
Independent Testing Laboratory in the presence of three (3)
SEC/National Grid SA Engineers & one (1) SEC/National Grid SA
approved Independent Inspection Agency (IIA) Inspector. All
costs of which shall be borne by Braga Moro-Italy. This was
confirmed in writing by Braga Moro-Italy through their letter #
SEC Prequalification dated April 13, 2011.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery of direct material supply order as
confirmed by Braga Moro- Italy through their letter # SEC
Prequalification dated April 13, 2011.
CEG
ITALY-BIBIENA
Yes
SWITZERLAND
Yes
SPAIN-Lasarte-Oria
Yes
Page 63 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Statron AG
FACTORY LOCATION
SWITZERLAND-Maegenwil
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter 12-03254-01-30504401 dated August
29, 2012, it is pre-qualified for UPS (S2000 series) as
conforming to SEC Specification # 46-TMSS-03, Rev.0 with the
following conditions:
All Type, Routine and Special testes shall be carried out on
the first batch of each types of UPS in an Independent Testing
Laboratory in the presence of three (3) SEC Engineers & one
(1) SEC approved Independent Inspection Agency (IIA)
Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer Statron AG through their letter # bm dated
August 13, 2012.
Ten (10) years extended warranty in respect of defects due
to design, manufacturing, installation and workmanship from
the date of PAC of the first turnkey project (in case of contract
award) or from the date of first delivery of direct material
supply order as confirmed by the manufacturer Statron AG
through their letter # bm dated August 13, 2012.
Total =
8. 4. 3
Applicable Standards:
AEG Power Solutions SAS
FRANCE--
Yes
BENNING
FRANCE
Yes
46-TMSS-02,46-TMSS-05
originally was SAFT Power System SAS-France
Page 64 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
BRAGA MORO
FACTORY LOCATION
ITALY
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
I. Prequalified for BATTERY CHARGER, 48 VDC (For Telecom
Applications).
II. Prequalified for DC-DC Converters, 48 Volts based on S&SD
Letter 12-03794-01-30504401 dated November 18, 2012 as
conforming to National Grid SA Specification # 46-TMSS-07,
Rev.0 with the following conditions:
All Type, Routine and Special testes as per National Grid SA
Specifications/Standards together shall be carried out on the
First unit to be supplied to SEC/National Grid SA of DC-DC
Converters, 48 Volts Output in an Independent Testing
Laboratory in the presence of three (3) SEC/National Grid SA
Engineers & one (1) SEC/National Grid SA approved
Independent Inspection Agency (IIA) Inspector. All costs of
which shall be borne by Braga Moro-Italy. This was confirmed in
writing by Braga Moro-Italy through their letter # SEC
Prequalification dated April 13, 2011.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery of direct material supply order as
confirmed by Braga Moro-Italy through their letter # SEC
Prequalification dated April 13, 2011.
AUSTRALIA-ALPHA
Yes
FRANCE-Lyon
Yes
FRANCE-Lyon
Yes
SPAIN
Yes
Page 65 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
ERSKINE
United Kingdom
Yes
EXIDE
United States
Yes
United Kingdom
Yes
Statron AG
SWITZERLAND-Maegenwil
Yes
T.D.I
United States
Yes
9
9
.1
9. 1. 0
12
LV DISTRIBUTION PANELS
Applicable Standards:
31-TMSS-02
Page 66 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
ABB/AEIL
Saudi Arabia
Yes
Saudi Arabia-RIYADH
Yes
Saudi Arabia-DAMMAM
Yes
Saudi Arabia-DAMMAM
Yes
Saudi Arabia-RIYADH
Yes
ETA-PCS
Yes
Saudi Arabia-Riyadh
Yes
Saudi Arabia-RIYADH
Yes
MUSAID SWITCHGEAR
Saudi Arabia-RIYADH
Yes
REMAL
Saudi Arabia-DAMMAM
Yes
SIEMENS
Saudi Arabia-JEDDAH
Yes
Page 67 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Waha Electric Supply Co. of Saudi Arabia(WESCOSA)-Dammam
FACTORY LOCATION
Saudi Arabia-Dammam
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD Letter # 11-01751/01-03032301 dated
27/06/2011, it is pre-qualified for Auxiliary AC & DC Panels up
to 132kV only as confirming to SEC specification # 31-TMSS-02,
Rev.0 with the following conditions:
All type, special, routine and sample tests as per SEC
specifications/standards shall be carried out on the first batch
of each type of Auxiliary AC&DC Panels to be supplied to SEC in
case of securing an order in the presence of three (3) SEC
engineers & one (1) approved independent inspection agency
Inspector in an independent testing laboratory. All the related
costs for witnessing the tests will be borne by the
manufacturer. This was confirmed by WESCOSA-Dammam
through letter # Nil dated 18/05/2010.
Ten (10) years extended warranty from the date of PAC of
the turnkey project in case of contract award or date of
delivery in case of direct material supply order. This was
confirmed by WESCOSA-Dammam through letter # Nil dated
30/08/2010.
10
10
.1
10. 1. 0
10
.2
10. 2. 0
Total =
12
Total =
Applicable Standards:
ABB/AEIL
Saudi Arabia
Yes
AREVA
FRANCE
Yes
Saudi Arabia-RIYADH
Yes
FRITZ DRIESCHER
GERMANY
Yes
HITACHI
JAPAN
Yes
KONCAR
Croatia/Hrvatska
Yes
SIEMENS
GERMANY
Yes
RMU, 15 KV
RMU, 15 KV
Applicable Standards:
ABB
Saudi Arabia-RIYADH
32-TMSS-07
Yes
Page 68 of 244
SER
10
.3
10. 3. 0
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
11
.1
11. 1. 0
12
12
.1
Pre-Qualified
Manufacturers
By SEC
AREVA
FRANCE
Yes
Saudi Arabia-RIYADH
Yes
FRITZ DRIESHER KG
GERMANY
Yes
Saudi Arabia-DAMMAM
Yes
MERLIN GERIN
FRANCE
Yes
SAUDI LUCY
Yes
SIEMENS AG EVM
GERMANY-FRANKFURT
Yes
Saudi Arabia-DAMMAM
Yes
W. LUCY
United Kingdom
Yes
REMARKS
Total =
10
Total =
Total =
Applicable Standards:
CELLMEC
11
FACTORY LOCATION
BAHRAIN
Yes
NER, UP TO 33 KV
NER, UP TO 33 KV
Applicable Standards:
CRESSAL RESISTOR
United Kingdom
Yes
FURSE
United Kingdom
Yes
M.S.Resistances
FRANCE--
Yes
METAL DEPLOYE
FRANCE
Yes
NATIONAL
INDIA
Yes
57-TMSS-01
BARE CONDUCTORS
Page 69 of 244
SER
12. 1. 1
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
Applicable Standards:
ALCOA
United States
Yes
Saudi Arabia-RIYADH
Yes
REMARKS
10-TMSS-01
INDIA-NALAGARH
Yes
Page 70 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
APAR Industries Ltd-SILVASSA
FACTORY LOCATION
INDIA-SILVASSA
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD Letter # 10-01566-2-03032300 dated
14/06/2010 & Letter # 14-03608/02-030504401 dated 04th
June 2014, it is pre-qualified for Bare Conductors as confirming
to SEC/National Grid SA specification # 10-TMSS-01, Rev.01
with the following conditions:
Saudi Arabia-Jeddah
Yes
BAHRAIN-MANAMA
Yes
MUSCAT--
Yes
RIYADH CABLES
Saudi Arabia-RIYADH
Yes
SAUDI CABLE
Saudi Arabia-JEDDAH
Yes
SOUTHWIRE
United States
Yes
Page 71 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
STERLITE (INDIA)
FACTORY LOCATION
INDIA--
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD Letter # 10-F001691/01-03032301 dated
June 19, 2010 and S&SD Letter 12-02686-1-30504401 dated
July 23, 2012, it is pre-qualified for Bare Conductors types
(ACAR, ACSR & AAAC) as confirming to SEC Specification #
10-TMSS-01, Rev.01 with the following condition:
ACAR, ACSR & AAAC conductors were successfully type
tested in accredited laboratory in the presence of SEC
Engineers with acceptable results.
Ten (10) years warranty from the date of PAC of the first
turnkey project in case of contract award or date of first
delivery in case of direct material supply order.
Total =
12
.2
12. 2. 1
11
TYPE ACSR/AW
BARE CONDUCTOR, ACSR/AW
Applicable Standards:
ALCOA
United States
Yes
INDIA-NALAGARH
Yes
01-TMSS-01,10-TMSS-01
Page 72 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
APAR Industries Ltd-SILVASSA
FACTORY LOCATION
INDIA-SILVASSA
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD Letter # 10-01566-2-03032300 dated
14/06/2010, it is pre-qualified for Bar Conductors as confirming
to SEC specification # 10-TMSS-01, Rev.01 with the following
conditions:
Saudi Arabia-Jeddah
Yes
Saudi Arabia-JEDDAH
Yes
BAHRAIN-MANAMA
Yes
MUSCAT--
Yes
RIYADH CABLES
Saudi Arabia-RIYADH
Yes
SAUDI CABLE
Saudi Arabia-JEDDAH
Yes
SOUTHWIRE
United States
Yes
Page 73 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
STERLITE (INDIA)
FACTORY LOCATION
INDIA--
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD Letter # 10-F001691/01-03032301 dated
19/06/2010, it is pre-qualified for Bare Conductors type
(ACSR/AW) as confirming to SEC specification # 10-TMSS-01
Rev.01 with the following condition:
12
.3
12. 3. 1
11
GROUND WIRE
GROUND WIRE
Applicable Standards:
ALCOA
United States
Yes
INDIA-NALAGARH
Yes
10-TMSS-03
Page 74 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
APAR Industries Ltd-SILVASSA
FACTORY LOCATION
INDIA-SILVASSA
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD Letter # 10-01566-2-03032300 dated
14/06/2010, it is pre-qualified for Overhead Ground Wire
(OGW) of Aluminum Clad Steel (ACS) Type only as confirming to
SEC specification # 10-TMSS-03, Rev.0 with the following
conditions:
ECN CG SA
SPAIN
Yes
JAPAN
Yes
BAHRAIN-MANAMA
Yes
RIYADH CABLES
Saudi Arabia-RIYADH
Yes
SAUDI CABLE
Saudi Arabia-JEDDAH
Yes
SOUTHWIRE
United States
Yes
TREFILEUROPE
FRANCE
Yes
Total =
12
.4
12. 4. 1
10
Applicable Standards:
United States-Statesville, NC
Yes
FM Sudafix
United Kingdom-Nottingham
Yes
FURSE
Saudi Arabia
Yes
CHINA
Yes
SOUTH KOREA
Yes
LTV COPPERWELD
United States
Yes
10-TMSS-05
Page 75 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SAUDI ELECTRIC INDUSTRIES CO. LTD.
FACTORY LOCATION
Saudi Arabia-JEDDAH
Pre-Qualified
Manufacturers
By SEC
REMARKS
Yes
Total =
12
.5
12. 5. 1
Applicable Standards:
10-TMSS-04
United Kingdom--
Yes
GERMANY-Monchengladbach
Yes
BRUGG TELECOM AG
SWITZERLAND
Yes
Yes
DRAKA NK
FINLAND
Yes
FUJIKURA
JAPAN
Yes
JAPAN
Yes
CHINA-Nantong
Yes
Page 76 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
LS CABLES
FACTORY LOCATION
KOREA, Republic of
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD letter # 10-02583-03032301 dated
19/09/2010, it is pre-qualified for OPGW as confirming to SEC
specification # 10-TMSS-04,Rev.0, with the following
conditions:
CANADA
Yes
PIRELLI
ITALY
Yes
PRYSMIAN TELECOM
SPAIN
Yes
PREVIOUSLY "PIRELLI"
KOREA, Republic of
Yes
12
.6
12. 6. 1
13
Applicable Standards:
10-TMSS-06
Page 77 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
JAPAN
Yes
JAPAN-Hitachi
Yes
Old Remark
Based on TS&SD letter# 09-00649-1-03032301 dated 28 March
2009 it is pre-qualified for GTACSR & GZTACSR.
Page 78 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
LS CABLES
FACTORY LOCATION
KOREA, Republic of
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD letter # 10-02584-03032301 dated
19/09/2010, it is pre-qualified for Heat Resistance Aluminum
Alloy Conductors, Gap& Non Gap type as confirming to SEC
specification # 10-TMSS-06,Rev.0, with the following
conditions:
13
13
.1
13. 1. 1
13.8 KV
XLPE CABLE 13.8 KV
Applicable Standards:
11-TMSS-04
Page 79 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ALFANAR ELECTRICAL SYSTEMS
FACTORY LOCATION
Saudi Arabia-RIYADH
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter 13-05014-2-3050440 dated September
08, 2013, it is pre-qualified for Insulated Conductor Cable
(XLPE) as conforming to National Grid SA Specification #
11-TMSS-04, Rev.0 with the following conditions:
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or date of
first delivery (in case of direct material supply order), as
confirmed through ALFANAR Electrical Systems, Riyadh letter
# nil dated March 10, 2013.
Type Tests have been successfully conducted in
KINETRIC-Canada in the presence of National Grid SA
Engineers on 1x630mm2 CU/XLPE/ATA/PVC 20/35 KV MV Cable
during 9th to 22nd April 2013. However, any MV Power Cable
beyond cable size of 630 mm2 to be supplied to SEC/National
Grid SA shall fully type tested at an accredited laboratory in the
presence of National Grid SA Engineers & third party inspector.
Yes
EGYPT--
Yes
Saudi Arabia-JEDDAH
Yes
LS
KOREA, Republic of
Yes
MUSCAT--
Yes
RIYADH CABLES
Saudi Arabia-RIYADH
Yes
SAUDI CABLE
Saudi Arabia-JEDDAH
Yes
KOREA, Republic of
Yes
13
.2
13. 2. 1
33 & 34.5 KV
XLPE CABLE 33 & 34.5 KV
Applicable Standards:
11-TMSS-04
Page 80 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ALFANAR ELECTRICAL SYSTEMS
FACTORY LOCATION
Saudi Arabia-RIYADH
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter 13-05014-2-30504401 dated September
08, 2013, it is pre-qualified for Insulated Conductor Cable
(XLPE) as conforming to National Grid SA Specification #
11-TMSS-04, Rev.0 with the following conditions:
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or date of
first delivery (in case of direct material supply order), as
confirmed through ALFANAR Electrical Systems, Riyadh letter
# nil dated March 10, 2013.
Type Tests have been successfully conducted in
KINETRIC-Canada in the presence of National Grid SA
Engineers on 1x630mm2 CU/XLPE/ATA/PVC 20/35 KV MV Cable
during 9th to 22 April 2013. However, any MV Power Cable
beyond cable size of 630 mm2 to be supplied to National Grid SA
shall be fully type tested at an accredited laboratory in the
presence of National Grid SA Engineers & third party inspector.
JAPAN
Yes
TURKEY--
Yes
Yes
EGYPT--
Yes
FUJIKURA CABLES
JAPAN
Yes
Saudi Arabia-JEDDAH
Yes
JAPAN
Yes
LS
KOREA, Republic of
Yes
MKM
HUNGARY
Yes
MUSCAT--
Yes
RIYADH CABLES
Saudi Arabia-RIYADH
Yes
SAUDI CABLE
Saudi Arabia-JEDDAH
Yes
SHOWA CABLE
JAPAN
Yes
KOREA, Republic of
Yes
13
.3
13. 3. 1
15
XLPE CABLES 69 KV
XLPE CABLES 69 KV
Applicable Standards:
ALCATEL
FRANCE
Yes
11-TMSS-01
Including Joints & Terminations
Page 81 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
JAPAN
Yes
TURKEY--
Yes
DRAKA NK
FINLAND
Yes
EGYPT--
Yes
FUJIKURA CABLES
JAPAN
Yes
JAPAN
Yes
Saudi Arabia-JEDDAH
Yes
JAPAN
Yes
MKM
HUNGARY
Yes
GERMANY-BERLIN
Yes
RIYADH CABLES
Saudi Arabia-RIYADH
Yes
SAUDI CABLE
Saudi Arabia-JEDDAH
Yes
SUDKABEL
GERMANY-GERMANY
Yes
13
.4
13. 4. 1
14
110KV TO 132 KV
XLPE CABLES 110 TO 132 KV
Applicable Standards:
11-TMSS-02
BRUGG
SWITZERLAND
Yes
JAPAN
Yes
TURKEY--
Yes
DRAKA NK
FINLAND
Yes
Page 82 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
EGYPT--
Yes
FUJIKURA
JAPAN
Yes
JAPAN
Yes
Saudi Arabia-JEDDAH
Yes
JAPAN
Yes
LS
KOREA, Republic of
Yes
GERMANY-BERLIN
Yes
RIYADH CABLES
Saudi Arabia-RIYADH
Yes
SAUDI CABLE
Saudi Arabia-JEDDAH
Yes
SUDKABEL
GERMANY-GERMANY
Yes
KOREA, Republic of
Yes
13
.5
13. 5. 1
15
230 K V
XLPE CABLE 230 K V
Applicable Standards:
11-TMSS-02
Page 83 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
BRUGG
SWITZERLAND
Yes
JAPAN
Yes
TURKEY--
Yes
FUJIKURA
JAPAN
Yes
JAPAN
Yes
JAPAN
Yes
LS
KOREA, Republic of
Yes
PREVIOUSLY LG;
Including Joints & Terminations.
Ten (10) years extended warranty from the date of PAC of
the First turnkey project in case of contract award or date of
the First delivery in case of direct material supply order.
GERMANY-BERLIN
Yes
SAUDI CABLE
Saudi Arabia-JEDDAH
Yes
SUDKABEL
GERMANY-GERMANY
Yes
KOREA, Republic of
Yes
13
.6
13. 6. 1
11
380 KV
XLPE CABLE -380 KV
Applicable Standards:
11-TMSS-02
BRUGG
SWITZERLAND
Yes
JAPAN
Yes
Page 84 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
TURKEY--
No
JAPAN
Yes
LS
KOREA, Republic of
Yes
PREVIOUSLY LG;
Including Joints & Terminations.
Ten (10) years extended warranty from the date of PAC of
the First turnkey project in case of contract award or date of
the First delivery in case of direct material supply order.
Based on S&SD letter # 15-3193-30504401 dated May 03,
2015, the manufacturer is prequalified to supply the following
equipment with the specified designations only:
380 kV cable 1x2500 mm2, CU/XLPE/LEAD/PE type.
Outdoor terminations with porcelain bushing type
UMEMA40Q004 from PPC insulators (Germany).
Outdoor terminations with porcelain bushing type
UMEMA40Q004.
GIS Terminations dry type UEPG40Q001.
Cable joint with screen interruption type UEMK40Q002.
Note: For all future SEC/National Grid SA projects/direct
purchase orders, porcelain bushings for outdoor terminations
shall be procured from our approved list.
NEXANS
BELGIUM-Charleroi
Yes
NKT
GERMANY
Yes
PIRELLI
GERMANY-BERLIN
Yes
SUDKABEL
GERMANY-GERMANY
Yes
Page 85 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
TAIHAN ELECTRIC WIRE COMPANY
FACTORY LOCATION
KOREA, Republic of
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-08139-01-30504401 dated January
07, 2015, the manufacturer is prequilified to supply power
cables rated 380 kV with conductor cross section of 1X2500
mm, XLPE, with copper wires metallic shield as per
11-TMSS-02, Rev.01 along with the cable accessories with the
following drawings numbers:
- Power cable: TXCCD-3802500-130501.
- Outdoor termination: CVC-APS-3804605N-BD (Rev. A).
- GIS termination fluid filled type: CVC-GWO-380-BD (Rev. A).
- GIS termination dry type: CVC-GWBS-380-BD (Rev. A).
- Cable joint type: CVC-MIP-380-BD (Rev. A).
- Cable joint (A type) with screen interruption type
CVC-MIP-380-R1-BD (Rev. A).
- Straight joint type CVC-MNP-380-BD (Rev. A).
- Coffin Box (1 hole) CV-C1-380N-BD (Rev. A).
- Coffin Box (1 hole) CV-C1-380N-BD (Rev. A).
JAPAN
Yes
14
14
.1
14. 1. 1
11
110 TO 132 KV
LPOF CABLE 110 KV TO 132 KV
Applicable Standards:
11-TMSS-03
ALCATEL CABLE
FRANCE
Yes
CANADA WIRE
CANADA
Yes
JAPAN
Yes
DATWYLER
United Kingdom
Yes
FUJIKURA
JAPAN
Yes
JAPAN
Yes
JAPAN
Yes
Page 86 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
GERMANY
Yes
SWITZERLAND
Yes
LS CABLES
KOREA, Republic of
Yes
NEXAN(CORTALLIOD)
SWITZERLAND
Yes
PIRELLI
ITALY
Yes
GERMANY-BERLIN
Yes
SHOWA CABLE
JAPAN
Yes
SUDKABEL
GERMANY-GERMANY
Yes
KOREA, Republic of
Yes
14
.2
14. 2. 1
230 KV
LPOF CABLE 230 KV
Applicable Standards:
11-TMSS-03
ALCATEL
FRANCE
Yes
CANADA WIRE
CANADA
Yes
JAPAN
Yes
FUJIKURA
JAPAN
Yes
JAPAN
Yes
JAPAN
Yes
GERMANY
Yes
GERMANY-BERLIN
Yes
SUDKABEL
GERMANY-GERMANY
Yes
KOREA, Republic of
Yes
14
.3
14. 3. 1
16
10
380 KV
LPOF CABLE 380 KV
Applicable Standards:
ALCATEL
FRANCE
Yes
11-TMSS-03
Including Joints & Terminations
Page 87 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
CANADA WIRE
CANADA
Yes
JAPAN
Yes
FUJIKURA
JAPAN
Yes
JAPAN
Yes
JAPAN
Yes
JAPAN
Yes
GERMANY
Yes
LS CABLES
KOREA, Republic of
Yes
PREVIOUSLY LG;
Including Joints & Terminations.
Ten (10) years extended warranty from the date of PAC of
the First turnkey project in case of contract award or date of
the First delivery in case of direct material supply order.
JAPAN
Yes
PIRELLI
ITALY
Yes
PIRELLI GENERAL
United Kingdom
Yes
GERMANY-BERLIN
Yes
SHOWA CABLE
JAPAN
Yes
SIEMENS
GERMANY
Yes
NORWAY
Yes
KOREA, Republic of
Yes
14
.4
14. 4. 1
17
Applicable Standards:
12-TMSS-11
---
Yes
AARTCO
Saudi Arabia-Al-Khobar
Yes
UP TO 230KV.
ABB
SWEDEN
Yes
Page 88 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
AUSTRALIA-Huntingwood, NSW
Yes
AL SHAHRANI EST.
Saudi Arabia-RIYADH
Yes
TURKEY--
Yes
JAPAN
Yes
JAPAN
Yes
LS CABLES
KOREA, Republic of
Yes
PREVIOUSLY LG
Saudi Arabia-RIYADH
Yes
PIRELLI
GERMANY-BERLIN
Yes
Saudi Arabia-Jeddah
Yes
STEINER
GERMANY
Yes
Total =
14
.5
14. 5. 0
Applicable Standards:
ABB
SWITZERLAND
Yes
AUSTRALIA-Huntingwood, NSW
Yes
14
.6
14. 6. 0
13
Applicable Standards:
11-TMSS-12
Page 89 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
JAPAN
Yes
Saudi Arabia-JEDDAH
Yes
REMARKS
JAPAN
Yes
LS CABLES
KOREA, Republic of
Yes
PIRELLI
GERMANY-BERLIN
Yes
SAUDI CABLE
Saudi Arabia-JEDDAH
Yes
Yes
PREVIOUSLY LG
Total =
15
15
.1
15. 1. 0
Applicable Standards:
United Kingdom--
Yes
ALCATEL
SWEDEN
Yes
B.V.TWENTSCHE KABELFABRIEK
Yes
BICC
United Kingdom
Yes
BRUGG TELECOM AG
SWITZERLAND
Yes
CORNING CABLES
Yes
DRAKA NK
FINLAND
Yes
ERICSON
SWEDEN
Yes
FUJIKURA LTD.
JAPAN
Yes
FURUKAWA
JAPAN
Yes
HITACHI
JAPAN
Yes
48-TMSS-02
PREVIOUSLY ALCOA FUJIKURA LTD. (AFL)
ACCESSORIES ONLY
Page 90 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
INDUSTRIAS ARRUTI
SPAIN
Yes
ONLY ACCESSORIES
LS
KOREA, Republic of
Yes
PREVIOUSLY LG
Saudi Arabia-RIYADH
Yes
Saudi Arabia-Riyadh
Yes
NETHERLANDS
Yes
NOKIA
FINLAND
Yes
ACCESSORIES ONLY
Oman-Rusayl
Yes
OPTOKON
CZECH REPUBLIC-Jihlava
Yes
PIRELLI
ITALY
Yes
PRYSMIAN TELECOM
SPAIN
Yes
PREVIOUSLY "PIRELLI"
Page 91 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
R & M Reichle & De-Massari AG
FACTORY LOCATION
SWITZERLAND-Wetzikon
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter 13-02127-030504401 dated May 19,
2013, R & M Reichle & De-Massari AG, Wetzikon, Switzerland is
pre-qualified for "Accessories only" fiber optic and copper
passive components (Structure Cabling) as conforming to
National Grid SA specification # 01-TMSS-01, Rev.01, with the
following conditions:
Five (5) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery of direct material supply order as
confirmed by R & M Reichle & De-Massari AG, Wetzikon,
Switzerland through their letter #Nill dated June 10, 2013.
RIYADH CABLES
Saudi Arabia-RIYADH
Yes
Saudi Arabia-RIYADH
Yes
SAUDI CABLE
Saudi Arabia-JEDDAH
Yes
SIEMENS
GERMANY
Yes
SUMITOMO
JAPAN-YOKOHAMA
Yes
TE Connectivity Ltd.
United States--
Yes
TELECT
Poland-Wroclaw
Yes
16
16
29
.0
16. 0. 0
Applicable Standards:
DEMIRER KABLO
TURKEY
Yes
48-TMSS-01,48-TMSS-03,48-TMSS-04,48-TMSS-05
CABLE & ACCESSORIES
Page 92 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
GOLDSTAR CABLE
KOREA, Republic of
Yes
Saudi Arabia-JEDDAH
Yes
KERPENWORK
GERMANY
Yes
LS CABLES
KOREA, Republic of
Yes
PREVIOUSLY LG
Saudi Arabia-Riyadh
Yes
RIYADH CABLES
Saudi Arabia-RIYADH
Yes
SAUDI CABLE
Saudi Arabia-JEDDAH
Yes
SIEMENS
GERMANY
Yes
STEINER
GERMANY
Yes
KOREA, Republic of
Yes
UP TO 100 PAIRS
Total =
17
17
.0
17. 0. 0
Applicable Standards:
ALPHA
United States
Yes
AT & T
Yes
BELDEN
United States
Yes
Saudi Arabia-Riyadh
Yes
SAUDI CABLE
Saudi Arabia-JEDDAH
Yes
Yes
18
18
11
.0
Page 93 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
18. 0. 0
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
Applicable Standards:
REMARKS
11-TMSS-10
Saudi Arabia-RIYADH
Yes
Saudi Arabia-Jeddah
Yes
BELDEN
United States
Yes
EGYPT--
Yes
Saudi Arabia-JEDDAH
Yes
Saudi Arabia-Riyadh
Yes
Jordan--
Yes
MUSCAT--
Yes
Saudi Arabia-RIYADH
Yes
SAUDI CABLE
Saudi Arabia-JEDDAH
Yes
KOREA, Republic of
Yes
Page 94 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
TEKAB Co. Ltd.
FACTORY LOCATION
United Arab Emirates-Sharjah
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter# 13-07588-30504401 dated December
11, 2013, it is pre-qualified for Power and/or Control Cable
Copper 600/1000 V Rating as conforming to National Grid SA
specification # 11-TMSS-10, Rev.01, with the following
conditions:
It is pre-qualified for All LV power & control cables with copper
conductor except clause 4.3.5 point a.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer TEKAB Co. Ltd, UAE
through their letter # 0580/SO/13 dated November 17, 2013.
Total =
19
19
.1
19. 1. 1
12
Applicable Standards:
---
Yes
ABB
SWITZERLAND
Yes
BRUGG CABLE
SWITZERLAND
Yes
DAITWEILER
United Kingdom
Yes
ELASTIMOLD
United States
Yes
JAPAN
Yes
G&W
United States
Yes
JAPAN
Yes
LS CABLES
KOREA, Republic of
Yes
NEXAN
SWITZERLAND
Yes
12-TMSS-10
APPROVED POWER CABLE MANUFACTURERS UP TO 132KV ARE
ACCEPTABLE SUPPLIERS FOR SPLICE AND TERMINATION KITS
OF THE SAME RATING
PREVIOUSLY LG
Page 95 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
NKT
FACTORY LOCATION
GERMANY-Cologne
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 15-05202-01-30504401 dated
September 15, 2015, it is pre-qualified for the following types
of 132 kV cables accessories:
- Switchgear Termination SEV 170 (3.7 0264-01)
- Transformer Termination TEV 170 (3.7 0263-01)
- Porcelain Outdoor Termination FEV 170-P (3.7 5056-04)
- Straight Joint with Screen Separation SME 145-S-P (3.7
8122-01)
Extended Warranty/Guarantee for the proposed 132 kV
cables accessories shall be provided in respect of the defects
due to design, manufacturing, installation and workmanship for
a period of ten (10) years from the date of Provisional
Acceptance Certificate (PAC) of the project (in case of contract
award) and from the date of delivery for the direct material
supply order as confirmed through the manufacturer letter # nil
dated June 04, 2013.
PFISTERER IXOSIL
SWITZERLAND
Yes
PIRELLI
GERMANY-BERLIN
Yes
RAYCHEM
GERMANY
Yes
RAYCHEM
Saudi Arabia-DAMMAM
Yes
KOREA, Republic of
Yes
Total =
19
.2
19. 2. 1
Applicable Standards:
---
Yes
ABB
GERMANY
Yes
12-TMSS-10
APPROVED 230 KV POWER CABLE MANUFACTURERS ARE ALSO
ACCEPTABLE SUPPLIERS FOR SPLICE AND TERMINATION KITS
OF THE SAME RATING
Total =
19
.3
19. 3. 0
16
Applicable Standards:
---
Yes
12-TMSS-10
APPROVED 380 KV POWER CABLE MANUFACTURERS ARE ALSO
ACCEPTABLE SUPPLIERS FOR SPLICE AND TERMINATION KITS
OF THE SAME RATING
Page 96 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
JAPAN
Yes
LS
KOREA, Republic of
Yes
PREVIOUSLY LG
NEXANS
SWITZERLAND-Cossonnay
Yes
20
20
.0
20. 0. 0
Applicable Standards:
ITALY-MILANO
Yes
ALCOA
United States
Yes
BURNDY
United States
Yes
CAROBENI
ITALY
Yes
DALEKOVOD PROIZVODNJA
Croatia/Hrvatska-Zagreb
Yes
12-TMSS-02
ELASTIMOLD
United States
Yes
Page 97 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
HOMAC
United States
Yes
INDUSTRIAS ARRUTI
SPAIN
Yes
ISELFA
ITALY
Yes
On Hold
Yes
MOSDORFER
AUSTRIA
Yes
ITALY-Campo Calabro
Yes
PFISTERER
SWEDEN
Yes
PREVIOUSLY SEFAG
PFISTERER
SWITZERLAND
Yes
PREVIOUSLY SEFAG AG
Page 98 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SA_RA Energy, Construction, Trade and
Industry Co. Inc.
FACTORY LOCATION
TURKEY-ADANA
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter# 14-09052-01-30504401 dated 11th
December 2014, this manufacturer is pre-qualified for
compression connectors up to 380kV conforming to 12-TMSS-02
Rev.01 with the following conditions.
Type tests (Corona/RIV, Heat Cycle, Fault Current and
Tensile Strength) with ACAR & ACSR/AW conductors were
performed at VEIKEI VNL Ltd. Budapest, Hungary from Nov.
2012 to June 2013.
Each new design of Compression Connectors which has not
been type tested, shall be type tested as per latest revision of
12-TMSS-02.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order.
SBI
SPAIN--
Yes
SICAMEX
Yes
SM-CI
FRANCE--
Yes
21
21
.1
21. 1. 1
18
INSULATORS
PORCELAIN INSULATORS
STATION POST INSULATOR PORCELAIN, UP TO 132 KV, 230 KV and 380 KV
Applicable Standards:
15-TMSS-01
DIELVE
ITALY
Yes
LAPP
GERMANY-ROSENTHAL
Yes
LAPP
United States
Yes
NGK
JAPAN
Yes
Page 99 of 244
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
PPC INSULATORS
FACTORY LOCATION
AUSTRIA
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD/ESD e-mail dated 07/07/2010 and PPC
Insulators (Austria) Letter # Nil dated 4th July 2010, it is
pre-qualified for Station Post Insulator Porcelain, up to 132kV,
230kV&380kV as confirming to SEC specification # 15-TMSS-01,
Rev.0 with the following conditions:
A)
Type tests conducted in presence of SEC Engineers on
132kV-10.9KN (Drawing # 124-11740-132-101), 230kV-10.3KN
(Drawing # 124-11850-132-101) and 380kV-12KN (Drawing #
124-11860-132-101 & 124-11870-132-801) Insulators.
B)
Any new type of Insulators (other than the types which
are mentioned in A) offered by PPC shall Type Tested in
presence of three (3) SEC Engineers and one (1) Approved
Independent Agency Inspector.
C) Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order.
SIEMENS
GERMANY
Yes
W.S.I
INDIA
Yes
(On HOLD)
21. 1. 2
21. 1. 3
Applicable Standards:
CERAMTEC
GERMANY-N/A
Yes
DIELVE
ITALY
Yes
LAPP
GERMANY-ROSENTHAL
Yes
NGK
JAPAN
Yes
SIEMENS
GERMANY
Yes
Applicable Standards:
LAPP
GERMANY-ROSENTHAL
Yes
NGK
JAPAN
Yes
Total =
Total =
15-TMSS-02,15-TMSS-03
15-TMSS-04
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
PPC INSULATORS (ELEKTROKERAMIK
SONNEBERG)
FACTORY LOCATION
GERMANY
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD/ESD e-mail dated 07/07/2010 and PPC
Insulators (ELEKTROKERAMIK SONNEBERG, Germany) Letter #
Nil dated 4th July 2010, it is pre-qualified for Long Rod Porcelain
Insulators up to 380kV as confirming to SEC specification #
15-TMSS-04, Rev.01 with the following conditions:
A)
Type tests conducted in presence of SEC Engineers on
160KN:LG75/18+17/1450 (Drawing # 11134-339900-B) and
330KN: LG105/18+17/1545 (Drawing # 11134-621400-A)
Insulators.
B)
Any new type of Insulators (other than the types which
are mentioned in A) offered by PPC shall Type Tested in
presence of three (3) SEC Engineers and one (1) Approved
Independent Agency Inspector.
C)
Ten (10) years warranty from the date of PAC of the first
turnkey project in case of contract award or date of first
delivery in case of direct material supply order.
SIEMENS
GERMANY
Yes
Total =
21
.2
21. 2. 0
Applicable Standards:
15-TMSS-02
SEDIVER
BRAZIL--
Yes
SEDIVER
ITALY
Yes
Complete Sample, Type & Routine Tests for the first order is
required.
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SGD LA GRANJA VIDRIERIA, S.L.
FACTORY LOCATION
SPAIN-Segovia
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter# 13-07206-01-30504401 dated
November 09, 2013, it is pre-qualified for Glass Insulator as
conforming to National Grid SA specification # 15-TMSS-02 ,
Rev.01, with the following conditions:
Fresh type tests shall be conducted on each type of
Insulators per clause 5.1 of 15-TMSS-02 Rve.01 and relevant
international standards in the presence of three (03)
SEC/National Grid SA engineers and one (01) SEC/National Grid
SA approved independent inspection agency (IIA) Inspector in
an Independent laboratory and all cost pertaining to these
tests shall be borne by the manufacturer. This was confirmed in
writing by the manufacturer through their letter # Nil dated
November 08, 2012.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated November 08, 2012.
Total =
21
.3
21. 3. 1
Applicable Standards:
E.B.REBOSIO S.r.L
ITALY
Yes
HUNGARY-BUDAPEST
Yes
LAPP
GERMANY-ROSENTHAL
Yes
United States-ILLINOIS
Yes
United States
Yes
15-TMSS-05
Up To 132 kV only. Complete Type, Routine / Sample tests for
first order & 10 Years Warranty from the date of PAC is
required.
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
PFISTERER SEFAG AG
FACTORY LOCATION
SWITZERLAND
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
It is pre-qualified for Composite Suspension & Tension insulators
up to 380 kV, Composite Line Post insulators up to 132 kV per
SEC Specification 15-TMSS-05, Rev.0 with the following
conditions based on TS&SD letter# 10-02374-03032301 dated
August 18, 2010:
A) Type Tests have been conducted in presence of SEC
Engineers on:
110KV, 120KN (Drawing # 138 206 -393A) and 160KN
(Drawing # 138 206 -667A) at 40 kA.
380KV, 160KN (Drawing # 138 206 -588BC) at 50kA.
However, the manufacturer shall perform the Power Arc Test
only at 63kA.
B) Any new type of Insulators (other than the types which are
mentioned in A) offered by PFISTERRER SEFAG AG
Switzerland shall be Type Tested in presence of three (3) SEC
Engineers and one (1) Approved Independent Agency
Inspector.
C) Ten (10) years warranty from the date of PAC.
XIANGFAN GUOWANG
CHINA--
Yes
21. 3. 2
Applicable Standards:
15-TMSS-05
LAPP
GERMANY-ROSENTHAL
Yes
United States-ILLINOIS
Yes
*All type/design & special tests were performed for first batch
at Independent lab. in presence of SEC/IIA Inspectorbased on
TS&SD fax#09-F00306-030323001 dated 17/02/2009.
-Extended 10(ten) year guarantee/warranty is required.
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
NGK LOCKE
FACTORY LOCATION
United States
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD letter # 10-F02356/02-03032301 dated
22/11/2010, it is pre-qualified for 380kV Composite Insulators
with the following conditions:
PFISTERER SEFAG AG
SWITZERLAND
Yes
SER
21
.4
21. 4
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Applicable Standards:
CSL Silicones Inc.
CANADA-Guelph Ontario
Yes
15-TMSS-07
Based on S&SD letter# 15-06643-01-30504401 dated August
26, 2015, it is pre-qualified for RTV Silicone Rubber Insulator
Coating Material Si-Coat 570hs as conforming to National Grid
SA specification # 15-TMSS-07, with the following conditions:
First batch of RTV Silicone Rubber Insulator Coating Material
Si-Coat 570hs to be supplied to SEC/National Grid SA shall be
type / design tested as per National Grid SA Specification #
15-TMSS-07, Rev.0 and relevant International Standards in the
presence of three (3) SEC Engineers & one (1) SEC approved
IIA Inspector as confirmed by the manufacturer through letter
# Nil dated 05-08-2015.
Ten (10) years extended Warranty for the proposed RTV
Silicone Rubber Insulator Coating Material Si-Coat 570hs in
respect of the defects due to design, manufacturing and
workmanship from the date of the Provisional Acceptance
Certificate (PAC) of the project (in case of contract award) and
from the date of delivery for the direct material supply order
shall be provided as confirmed through the manufacturer letter
# Nil dated 05-08-2015.
United States-Auburn
Yes
22
22
.1
HARDWARE FITTINGS
SER
22. 1. 0
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
HARDWARE FITTINGS
Pre-Qualified
Manufacturers
By SEC
Applicable Standards:
A SALVI & C SPA
ITALY-MILANO
Yes
ALCOA
United States
Yes
CAROBENI
ITALY
Yes
DALEKOVOD PROIZVODNJA
Croatia/Hrvatska-Zagreb
Yes
REMARKS
12-TMSS-01
DAMP
ITALY
Yes
DERVAUX
FRANCE
Yes
United States-Columbia
Yes
INDUSTRIAS ARRUTI
SPAIN
Yes
ISELFA
ITALY
Yes
JOSLYN
United States
Yes
MOSDORFER GMBH
AUSTRIA-WEIZ
Yes
On Hold
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Nuova Elettromeccanica Sud S.p.A
FACTORY LOCATION
ITALY-Campo Calabro
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 15-06603-030504401 dated August 13,
2015 it is pre-qualified for Hardware Fittings, as conforming to
National Grid SA specifications # 12-TMSS-01 with the following
condition:
Manufacturer through Letter # Nil dated 14.11.2014 has
confirmed in writing to conduct the type test during
prequalification. Accordingly, some of the type tests as
mutually agreed between SEC/National Grid SA and NES were
conducted and witnessed by SEC/National Grid SA Engineers
during plant survey visit. However, all other type tests shall be
conducted on the First batch supply of Hardware Fittings to
SEC/National Grid SA, at an independent laboratory in the
presence of three (3) SEC/National Grid SA engineers and one
(1) approved IIA (Independent Inspection Agency) inspector as
confirmed by the manufacturer vide their letter no. nil dated
14/11/2014.
Each new design of Hardware Fittings which has not been
tested, shall be type tested as per latest revision of
12-TMSS-01.
Ten (10) years Extended Warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order shall be
applicable for the Line Hardware to be supplied to SEC/National
Grid SA, as confirmed through letter # Nil dated 14.11.2014.
PFISTERER
SWITZERLAND
Yes
PREVIOUSLY SEFAG AG
PFISTERER
SWEDEN
Yes
PREVIOUSLY SEFAG
United States
Yes
TURKEY-ADANA
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SICAMEX
22
.2
22. 2. 0
23
23
.1
23. 1. 0
FACTORY LOCATION
FRANCE-FEUGEROLLE & POMPADOUR
Pre-Qualified
Manufacturers
By SEC
REMARKS
Yes
Total =
17
Total =
Applicable Standards:
Saudi Arabia
Yes
DERVAUX
FRANCE
Yes
OBSTA
FRANCE
Yes
P&R TECHNOLOGIES
United States
Yes
PFISTERER SEFAG
SWITZERLAND
Yes
KOREA, Republic of
Yes
SM-CI
FRANCE--
Yes
United States
Yes
12-TMSS-03
PREVIOUSLY SEFAG AG
AL BABTAIN
Applicable Standards:
Saudi Arabia-RIYADH
20-TMSS-01
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Al Yamamah Electric Powers Factory
FACTORY LOCATION
Saudi Arabia-Jeddah
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD letter # 11-03472-03032301 dated
09/01/2011, it is pre-qualified for Substation Steel Structure
(Latticed) up to 132kV as confirming to SEC specification #
20-TMSS-01, Rev.0 with the following conditions:
AL ZAMIL STEEL
Saudi Arabia-DAMMAM
Yes
EGYPT-N/A
Yes
Alfanar Steel
Saudi Arabia-Riyadh
Yes
All type, routine & special tests including the load test shall
be carried out on the first batch to be supplied to SEC in
securing an order in the manufacturer's testing laboratory in
the presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.
Saudi Arabia-JEDDAH
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Energya Steel Solution (Hesham Helal El
Sewedy & Partners for Steel Industries Co.)
FACTORY LOCATION
Saudi Arabia-Rabigh
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD letter# 09-2179/07-03032301 dated
November 11, 2009, approval of Executive Directive for TS&SD
letter# 09-02179/06-03032301 dated November 11, 2009 &
based on S&SD letter# 13-01978/01-30504401 dated June 10,
2013, it is pre-qualified for Substation Steel Structures up to
380kV as conforming to National Grid SA specification #
20-TMSS-01, Rev.01 with the following condition:
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or date of
first delivery in case of direct material supply order.
Yes
HIDADA
Saudi Arabia-JEDDAH
Yes
INDIA--
Yes
INDIA-CHENNAI
Yes
NAJEM
Saudi Arabia
Yes
Yes
23
.2
23. 2. 0
13
AL BABTAIN
Applicable Standards:
Saudi Arabia-RIYADH
20-TMSS-01
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Al Yamamah Electric Powers Factory
FACTORY LOCATION
Saudi Arabia-Jeddah
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 13-05834-30504401-01 dated
September 29, 2013 and letter # 12-0054-30504401 dated
January 10, 2012 Al-Yamamah Electric Power Towers Factory,
Jeddah is prequalified for Transmission Line Structures up to
380 kV as conforming to National Grid SA Specification #
20-TMSS-01, Rev.0 with the following conditions:
Any new transmission Line Structure (Latticed) designed by
Al-Yamamah Electric Power Towers Factory, Jeddah (except
other than previous approved design and drawings provided by
SEC/National Grid SA to the manufacturer) shall be subjected to
full scale loading tests and other type, routine & special tests as
per SEC/National Grid SA Standards Specifications and relevant
International Standards in the presence of three (03)
SEC/National Grid SA engineers and one (01) SEC/National Grid
SA approved independent inspection agency (IIA) Inspector
and all cost pertaining to these tests shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter # Nil dated January 07,
2012.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated October 21, 2009 and letter # Nil dated January 07,
2012.
AL ZAMIL STEEL
Saudi Arabia-DAMMAM
Yes
EGYPT-N/A
Yes
Alfanar Steel
Saudi Arabia-Riyadh
Yes
All type, routine & special tests including the load test shall
be carried out on the first batch to be supplied to SEC in
securing an order in the manufacturer's testing laboratory in
the presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.
Saudi Arabia-JEDDAH
Yes
Saudi Arabia-JEDDAH
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Energya Steel Solution (Hesham Helal El
Sewedy & Partners for Steel Industries Co.)
FACTORY LOCATION
Saudi Arabia-Rabigh
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD letter# 09-2179/07-03032301 dated
November 11, 2009 & based on S&SD letter#
13-01978/01-30504401 dated June 10, 2013, it is pre-qualified
for Transmission Line Steel Structures and Communication
Towers as conforming to National Grid SA specification #
20-TMSS-01, Rev.01 with the following conditions:
The approval will be initially restricted to the following items
only:
1. Transmission Towers for projects up to 132kV
2. Communication Towers for Transmission Sector
Any Transmission Line Structure (Latticed) of new design
proposed by ENERGYA Steel Solutions, Rabigh (except for the
pervious approved design and drawings provided by SEC/
National Grid SA to the manufacturer) shall be subjected to
full-scale loading tests and other type, routine and special tests
as per National Grid SA standards specifications and relevant
International Standards in the presence of three (3)
SEC/National Grid SA engineers & one (1) National Grid SA
approved independent inspection agency (IIA) Inspector and all
cost pertaining to the tests shall be borne by the manufacturer.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or date of
first delivery in case of direct material supply order.
HIDADA
Saudi Arabia-JEDDAH
Yes
INDIA-Gujarat
Yes
INDIA--
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
INDIA-CHENNAI
Yes
Yes
REMARKS
23
.3
23. 3. 0
13
Applicable Standards:
AL BABTAIN
Saudi Arabia-RIYADH
Yes
Saudi Arabia-Rabigh
Yes
20-TMSS-02
All Type, Routine and Special Tests including the load test
per SEC specification # 20-TMSS-02 and all relevant
International Standards shall be conducted on the first batch in
presence of three (3) SEC Engineers and one (1) SEC approved
independent inspection agency (IIA) Inspector and related cost
pertaining to the test shall be borne by Hesham Helal EL
Sewedy & Partners for Steel Industries Co.(Energya Steel
Solutions) as confirmed by manufacturer through letter #
SEC/WK/100524 dated 24th May 2010.
Saudi Arabia-JEDDAH
Yes
PETIT JEAN
FRANCE
Yes
METERIAL / EQUIPMENT
DESCRIPTION
SER
23
.5
23. 5. 1
23. 5. 2
24
24
.0
24. 0. 0
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
SUMMIT MANUFACTURING
United States-PA
Yes
TECHNOPALI
ITALY
Yes
VALMONT
United States
Yes
REMARKS
Total =
Total =
Total =
WOOD POLES
WOOD POLES, ANSI CLASS HI H 3
Applicable Standards:
ATLANTIC WOOD IND.
United States-GEORGIA
Yes
United States-ALABAMA
Yes
COLFAX CREOSOTING CO
United States-LOUISIANA
Yes
KOPPERS INDUSTRIES
United States-PA
Yes
STALLWORTH TIMBER
United States-ALABAMA
Yes
CANADA-NEW WESTMINSTER
Yes
United States-OREGON
Yes
Applicable Standards:
ATLANTIC WOOD IND.
United States-GEORGIA
Yes
United States-ALABAMA
Yes
COLFAX CREOSOTING CO
United States-LOUISIANA
Yes
KOPPERS INDUSTRIES
United States-PA
Yes
STALLWORTH TIMBER
United States-ALABAMA
Yes
CANADA-NEW WESTMINSTER
Yes
United States-OREGON
Yes
.
GALVANIZED GUY WIRE (GROUNDING)
Applicable Standards:
10-TMSS-02
SER
25
25
.1
25. 1. 0
25
.2
25. 2. 0
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
United States
Yes
JOSLYN
United States
Yes
SOUTHWIRE
United States
Yes
TREFILEUROPE
FRANCE
Yes
REMARKS
Total =
Total =
RACEWAYS
Applicable Standards:
ABB ( T& D)
United States-N/A
Yes
UNIBUS
United States
Yes
WESCOSA
Saudi Arabia-DAMMAM
Yes
Applicable Standards:
3M
United States-Minnesota
Yes
AB WIRE
SWEDEN-sweden
Yes
ABAHSAIN-COPE
Yes
AL-AMAL CO.
Saudi Arabia-RIYADH
Yes
24-TMSS-01
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ALASHHOURY INDUSTRY
FACTORY LOCATION
Saudi Arabia-Riyadh
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD letter # 11-0036/04-03032301 dated
06/06/2011, it's prequalified for Cable Trays & Cable Ladders as
conforming to SEC Specification # 24-TMSS-01, Rev.0 with the
following conditions:
Saudi Arabia-Riyadh
Yes
Saudi Arabia-JEDDAH
Yes
EFCOR
United States
Yes
Saudi Arabia-Riyadh
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Fas Al-Jazeera
FACTORY LOCATION
Saudi Arabia-Dammam
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 15-00242/01-30504401 dated March
19 2015, the manufacturer is prequalified for Cable trays,
Cable Ladders and Accessories as conforming to National Grid
SA specification # 24-TMSS-01, Rev.01 with the following
conditions:
1. For new designs of cable trays or cable ladders proposed by
FAS Al Jazeera (other than the test proven SEC/National Grid
SA designs), All type, special, routine tests shall be conducted
on the first batch to be supplied to SEC/National Grid SA, in the
presence of three (3) SEC/National Grid SA engineers at
SEC/National Grid SA approved independent testing laboratory.
2. Ten (10) years extended warranty shall be provided from
the date of the Provisional Acceptance Certificate (PAC) of the
first turnkey project (in case of contract award) and from the
date of first delivery in case of direct material supply order. This
was confirmed by FAS Al Jazeera United Factory Co. through
their letter# NIL dated: 2nd December, 2012G.
HIDADA
Saudi Arabia-JEDDAH
Yes
Yes
O-Z GEDNEY
United States
Yes
Saudi Arabia-JEDDAH
Yes
Saudi Arabia-Jeddah
Yes
TOLARTOIS
FRANCE
Yes
WESCOSA
Saudi Arabia-DAMMAM
Yes
SER
26
26
.1
26. 1. 0
27
27
.1
27. 1. 0
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Total =
17
Total =
CONDUIT FITTINGS
Applicable Standards:
AMIANTIT RUBBER IND. (ARIL)
Saudi Arabia-DAMMAM
Yes
Yes
23-TMSS-02
SWITCHES
Applicable Standards:
ABB ( T& D)
United States-N/A
Yes
ALPHA NIDAU
SWITZERLAND
Yes
Alstom Grid S. p .A
Yes
30-TMSS-01
SER
27
.2
27. 2. 0
27
.3
27. 3. 0
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
28
.1
28. 1. 0
Pre-Qualified
Manufacturers
By SEC
REMARKS
AREVA
FRANCE
Yes
EFACEC
PORTUGAL
Yes
HAPAM
NETHERLANDS
Yes
HITACHI Ltd.
JAPAN--
Yes
MG/EGIC
FRANCE
Yes
S&C
United States
Yes
SDCEM
FRANCE
Yes
SIEMENS
GERMANY
Yes
SOUTHERN STATES
United States
Yes
12
Total =
Total =
LV AUTO-TRANSFER SWITCH
LV AUTO-TRANSFER SWITCH
Applicable Standards:
ALSTOM
FRANCE
Yes
ASCO
Yes
WESTINGHOUSE
United States
Yes
Applicable Standards:
FRITZ DRIESHER KG
28
FACTORY LOCATION
GERMANY
Yes
Applicable Standards:
ABB
SWEDEN
31-TMSS-01
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
ABB/AEIL
Saudi Arabia
Yes
ACRASTYLE
United Kingdom
Yes
AEL -SIEMENS
Saudi Arabia-JEDDAH
Yes
Saudi Arabia-RIYADH
Yes
Saudi Arabia-Alkhobar
Yes
AREVA
United Kingdom
Yes
United Kingdom
Yes
Saudi Arabia-RIYADH
Yes
ETA-PCS
Yes
JAL INTERNATIONAL
Saudi Arabia-KHOBAR
Yes
Up to 132kV only.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
delivery in case of first direct material supply order.
CROATIA-Dicmo
Yes
LS
KOREA, Republic of
Yes
PREVIOUSLY LG
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
MEMF-ETA Switchgear Manufacturing
Company
FACTORY LOCATION
Saudi Arabia-Riyadh
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter 13-03789-03-30504401 dated January
28, 2013. It is prequalified for Relay & Control Panel up to
132kV as conforming to National Grid SA specification #
31-TMSS-01, Rev.0, with the following condition:
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or the date
of first delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
META/12/AM dated March 23, 2011.
Saudi Arabia-Riyadh
Yes
PROTEA/AREVA T&D
FRANCE--
Yes
REYROLLE LTD.
United Kingdom
Yes
FRANCE-GRENOBLE
Yes
SIEMENS
GERMANY
Yes
Saudi Arabia-Riyadh
Yes
TIEPCO
Saudi Arabia-DAMMAM
Yes
VA TECH
Saudi Arabia-RIYADH
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
WESCOSA
FACTORY LOCATION
Saudi Arabia-DAMMAM
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD letter # 11-F02715-03032301 dated
17/09/2011, it is prequalified for Relay & Control Panels, 230kV
and above as confirming to SEC specification # 31-TMSS-01,
Rev.0 with the following conditions:
All type, special, routine and sample tests as per SEC
specifications/standards shall be carried out on the first batch
of Relay & Control Panels to be supplied to SEC, in case of
securing an order, in the presence of three (3) SEC Engineers &
one (1) approved Independent Inspection Agency Inspector in
an Independent Testing Laboratory. All the related costs for
witnessing the tests will be borne by the manufacturer. This
was confirmed by WESCOSA-Dammam through letter # Nil
dated 16/06/2010.
Ten (10) years extended warranty from the date of PAC of
the turnkey project in case of contract award or date of
delivery in case of direct material supply order. This was
confirmed by WESCOSA-Dammam through letter # Nil dated
05/10/2010.
28
.2
28. 2. 0
Total =
23
Total =
12
ANNUNCIATOR SYSTEM
ANNUNCIATOR SYSTEM
Applicable Standards:
ABB SUBSTATION AUTOMATION OY
FINLAND
Yes
United States
Yes
JAPAN
Yes
JAPAN
Yes
LS
KOREA, Republic of
Yes
NEXANS
SWITZERLAND
Yes
PAN ALARM
United States
Yes
PIRELLI
GERMANY-BERLIN
Yes
RONAN ENGINEERING
United Kingdom
Yes
United Kingdom
Yes
SIEMENS
GERMANY
Yes
STEINER
JAPAN
Yes
38-TMSS-05
SACO 16D3
PREVIOUSLY LG
SER
28
.3
28. 3
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Applicable Standards:
KOREA, Republic of-Seoul
Yes
QUALITROL DMS
Scotland-GLASGOW
Yes
29
29
.1
29. 1. 0
Applicable Standards:
35-TMSS-01
Yes
ABB
SWEDEN
Yes
ABB HV TECHNOLOGIES
SWITZERLAND
Yes
AREVA
FRANCE
Yes
BOWTHORPE
United Kingdom
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Eaton
Yes
INDIA
Yes
JAPAN--
Yes
HITACHI Ltd.
JAPAN--
Yes
United States-Columbia
Yes
JAPAN
Yes
MITSUBISHI
JAPAN--
Yes
SIEMENS
GERMANY
Yes
JAPAN--
Yes
TRIDELTA
GERMANY
Yes
Total =
30
30
.1
30. 1. 1
15
CIRCUIT BREAKER
Applicable Standards:
37-TMSS-01
ABB ( T& D)
United States-N/A
Yes
AREVA
United States-CHARLEROI
Yes
JAPAN--
Yes
GE-HITACHI HVB
United States-GEORGIA
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
HITACHI Ltd.
JAPAN--
Yes
MITSUBISHI
JAPAN--
Yes
SIEMENS
GERMANY-Berlin
Yes
JAPAN--
Yes
30. 1. 2
Applicable Standards:
ABB
SWITZERLAND
Yes
ABB ( T& D)
United States-N/A
Yes
United States-Charleroi
Yes
37-TMSS-01
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
JAPAN--
Yes
GE-HITACHI HVB
United States-GEORGIA
Yes
HITACHI Ltd.
JAPAN--
Yes
MITSUBISHI
JAPAN--
Yes
SIEMENS
GERMANY-Berlin
Yes
United States
Yes
JAPAN--
Yes
30. 1. 3
Applicable Standards:
ABB ( T& D)
United States-N/A
Yes
AREVA
United States-CHARLEROI
Yes
10
37-TMSS-01
SER
30
.2
30. 2. 1
30. 2. 2
30. 2. 3
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
JAPAN--
Yes
GE-HITACHI HVB
United States-GEORGIA
Yes
HITACHI Ltd.
JAPAN--
Yes
MITSUBISHI
JAPAN--
Yes
JAPAN--
Yes
Total =
Total =
Total =
Applicable Standards:
ABB
SWEDEN
Yes
ABB
SWITZERLAND
Yes
ABB SWITCHGEAR AB
SWEDEN-LUDUVIKA
Yes
AREVA
SWITZERLAND-OBERENTFELDEN
Yes
AREVA_FRANCE,VILLEUR BANNE
FRANCE-,VILLEUR BANNE
Yes
SIEMENS
GERMANY
Yes
Applicable Standards:
ABB
SWEDEN
Yes
AREVA
GERMANY
Yes
AREVA_FRANCE,VILLEUR BANNE
FRANCE-,VILLEUR BANNE
Yes
SIEMENS
GERMANY
Yes
Applicable Standards:
ABB
SWEDEN
Yes
AREVA_FRANCE,VILLEUR BANNE
FRANCE-,VILLEUR BANNE
Yes
37-TMSS-02
37-TMSS-02
37-TMSS-02
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SIEMENS
30. 2. 4
31
31
.1
31. 1. 0
31
.2
31. 2. 0
.3
31. 3. 1
GERMANY
Pre-Qualified
Manufacturers
By SEC
REMARKS
Yes
Total =
Total =
Total =
Total =
Applicable Standards:
S&C
CANADA
Yes
S&C
United States
Yes
SIEMENS
GERMANY
Yes
LINE TRAP
LINE TRAP
Applicable Standards:
HAEFELY-TRENCH ELECTRIC
CANADA
Yes
HAEFELY-TRENCH ELECTRIC
SWITZERLAND
Yes
38-TMSS-01
LINE TUNER
LINE TUNER
Applicable Standards:
ABB HV TECHNOLOGIES
31
FACTORY LOCATION
SWITZERLAND
38-TMSS-02
Yes
Applicable Standards:
ABB
SWEDEN
Yes
ABB HV TECHNOLOGIES
SWITZERLAND
Yes
38-TMSS-08,50-TMSS-02
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Electrotecnica Arteche
FACTORY LOCATION
SPAIN-Mungia
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter 12-03192-02-30504001 dated February
19, 2012, it is pre-qualified for CVT Capacitor Voltage
Transformer up to 132 kV only as confirming to SEC
Specification # 50-TMSS-02 Rev.0 with the following
conditions:
United States
Yes
HAEFELY-TRENCH ELECTRIC
FRANCE
Yes
HAEFELY-TRENCH ELECTRIC
CANADA
Yes
HAEFELY-TRENCH ELECTRIC
SWITZERLAND
Yes
Croatia/Hrvatska--
Yes
NISSIN
JAPAN
Yes
ITALY
Yes
PFIFFNER
SWITZERLAND
Yes
All type, routine & special tests including the load test shall
be carried out on the first batch to be supplied to SEC in
securing an order in an independent testing laboratory in the
presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.
RITZ
United States
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
TRENCH ITALIA
FACTORY LOCATION
ITALY-N/A
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
PREVIOUSLY AS VA TECH (NOUVA MAGRINI GALILEO)
Total =
31
.4
31. 4. 0
13
Applicable Standards:
ABB
GERMANY
Yes
AREVA
FRANCE
Yes
PORTUGAL-Maia
Yes
38-TMSS-03
RTU-560, SPIDER 200,232 & 233
FOXBORO
AUSTRALIA
Yes
GE HARRIS
CANADA
Yes
HARRIS D20
Yes
HARRIS CORPORATION
Yes
JAL INTERNATIONAL
Saudi Arabia-KHOBAR
Yes
ASSEMBLING ONLY
LSIS
Yes
MICROSOL LTD.
Ireland-DUBLIN
Yes
SAT
AUSTRIA
Yes
SIEMENS
GERMANY
Yes
Yes
VA TECH
AUSTRIA
Yes
TELEGYR 5700
Total =
31
.5
14
SER
31. 5. 0
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
Applicable Standards:
REMARKS
38-TMSS-04
ABB
GERMANY
Yes
RTU 560
GE HARRIS
CANADA
Yes
HARRIS D20
Yes
JAL INTERNATIONAL
Saudi Arabia-KHOBAR
Yes
LSIS
Yes
MICROSOL LTD.
Ireland-DUBLIN
Yes
RONAN ENGINEERING
Yes
X500E/1000
Total =
31
.6
31. 6. 1
31. 6. 2
TRANSDUCERS
FREQUENCY TRANSDUCERS
Applicable Standards:
ALSTOM
United States
Yes
ISKRA MIS
SLOVENIA-KRANJ
Yes
Total =
Applicable Standards:
AREVA
31. 6. 3
United Kingdom
TRANSDUCERS
Yes
Applicable Standards:
CEWE INSTRUMENTS AB
SWEDEN
Yes
ENERDIS
FRANCE
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
LSIS
Yes
TILLQUIST
SWEDEN
Yes
United Kingdom--
Yes
REMARKS
SEVEN (7) YEARS EXTENDED WARRANTY.
31. 6. 4
WATTHOURS/VARHOURS TRANSDUCERS
Applicable Standards:
ISKRA MIS
SLOVENIA-KRANJ
Yes
MITSUBISHI ELECTRIC
JAPAN
Yes
SCIENTIFIC COLUMBUS
United States
Yes
Total =
31. 6. 5
VOLTAGE TRANSDUCERS
Applicable Standards:
ABB (ASEA INC.)
CANADA-MONTREAL
Yes
AREVA
United Kingdom
Yes
ISKRA MIS
SLOVENIA-KRANJ
Yes
TRANSDATA
United States
Yes
Total =
31. 6. 6
WATTS/VARS TRANSDUCERS
Applicable Standards:
ABB (ASEA INC.)
CANADA-MONTREAL
Yes
AREVA
United Kingdom
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
ISKRA MIS
SLOVENIA-KRANJ
Yes
TRANSDATA
United States
Yes
REMARKS
ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT
EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER
DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT
DURING TENDER/BIDDING STAGE.
Total =
31
.7
31. 7. 1
PROTECTIVE RELAYS
TRANSMISSION LINE PROTECTIVE RELAYS 380/132/115/110kV
Applicable Standards:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ABB
FACTORY LOCATION
SWEDEN---
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
RED 670
Ordering code:
RED670*1.2-B32X00-B10B11B21C24P01-B1X-CB-KB-B-B6X0-D1
A-BA-XE
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
4CT+4VT+12BIs+12BOs
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
RED 670
Ordering code:
RED670*1.2-B32X00-B10B11B21C24P01-B1X-CB-KB-B-B6X0-D1
A-CA-XE
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Hardware:
4CT+4VT+12BIs+12BOs
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
RED 670
Ordering code:
RED670*1.2-B32X00-B10B11B21C24P01-B1X-CB-KB-B-B6B6-D1
A-BA-XE
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
RED 670
Ordering code:
RED670*1.2-B32X00-B10B11B21C24P01-B1X-CB-KB-B-B6B6-D1
A-CA-XE
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Alstom
FACTORY LOCATION
United Kingdom---
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
MiCOM P546
Ordering Code:
P54631NH7M0710M
Built In Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
4CT+4VT+12BIs+12BOs
8CT+4VT+16BIs+16BOs
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
MiCOM P546
Ordering Code:
P54631NK7M0710M
Built In Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Hardware:
4CT+4VT+12BIs+12BOs
8CT+4VT+16BIs+16BOs
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
GE
FACTORY LOCATION
CANADA---
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
L90
Ordering code:
L90-K03-HKH-F8L-H6L-L6U-W7K(*)
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
4CT+4VT+12BIS+12BOS
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
L90
Ordering code:
L90-K03-HKH-F8L-H6L-L6U-W73(*)
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
4CT+4VT+12BIS+12BOS
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
L90
Ordering code:
L90-K05-HKH-F8L-H6L-L8N-N6D-S67-U67-W7K(*)
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
L90
Ordering code:
L90-K05-HKH-F8L-H6L-L8N-N6D-S67-U67-W73(*) (*) CH2 to be
attenuated to fit SDH
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Schneider Electric
FACTORY LOCATION
United Kingdom-Stone
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-040883-2-30504401 dated June 12,
2014, M/s Schneider Electric from United Kingdom stone is
prequalified for MiCOM P546 as per the following conditions:
Type tests shall be carried out on the MiCOM P40 relays as
per new IEC 61850-10 (2012-12) edition 2 in the approved
Independent Testing laboratory witnessing by three (3)
National Grid SA engineers and one (1) approved Independent
Agency Inspector (IIA). All costs of witnessing the tests shall
be borne by the manufacturer as per their confirmation through
letter # Nil dated October 23, 2013.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed by the manufacturer through their letter # Nil dated
June 25, 2013.
The following type tests (Change of Temperature per IEC
60068-2-14 2009, Damp Heat Steady State per IEC 60068-2-78
2002 & Enclosure Protection per IEC 60259 2001) for MiCOM
P546 shall be conducted in the accredited testing laboratory
witnessing by one (1) Independent Inspection Agency (IIA)
inspector and type test report shall be submitted within July
2014.
Ordering Codes, Built in Functions & Hardware shall be as the
following:
Ordering Code: P54631NA7M0D08M
Built in Functions: 87L, Under current 37,Inrush Blocking, Under
/ over Frequency 81,open conductor protection, Second
harmonic detection, 21P&G, 67DEF, 79 (1 CB or 2 CB)
controlled + 25, SEF, 50/51PH&GR / SEF/46, 67P/ 67N ,49
Thermal Overload, 27/59/59N, 50BF, 74 DC supply supervision,
74 Trip circuit supervision, CT Supervision, 60 VT Supervision,
DFR/SOE / Fault Locator
Hardware: 8xCT(Ph) + 5xVT, 32 Digital Inputs, 24Digital
Outputs, Protection data interface-1 850, Protection data
interface-2 850, IEC61850, 2 x port(PRP)
Ordering Code: P54631NL7M0D08M
Built in Functions: 87L, Under current 37,Inrush Blocking, Under
/ over Frequency 81,open conductor protection, Second
harmonic detection, 21P&G, 67DEF, 79 (1 CB or 2 CB)
controlled + 25, SEF, 50/51PH&GR / SEF/46, 67P/ 67N ,49
Thermal Overload, 27/59/59N, 50BF, 74 DC supply supervision,
74 Trip circuit supervision, CT Supervision, 60 VT Supervision,
DFR/SOE / Fault Locator
Hardware: 8xCT(Ph) + 5xVT, 32 Digital Inputs, 24Digital
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Outputs, Protection data interface-1 1300, Protection data
interface-2 850, IEC61850, 2 x port(PRP)
Ordering Code: P54631NR7M0D08M
Built in Functions: 87L, Under current 37,Inrush Blocking, Under
/ over Frequency 81,open conductor protection, Second
harmonic detection, 21P&G, 67DEF, 79 (1 CB or 2 CB)
controlled + 25, SEF, 50/51PH&GR / SEF/46, 67P/ 67N ,49
Thermal Overload, 27/59/59N, 50BF, 74 DC supply supervision,
74 Trip circuit supervision, CT Supervision, 60 VT Supervision,
DFR/SOE / Fault Locator
Hardware: 8xCT(Ph) + 5xVT, 32 Digital Inputs, 24Digital
Outputs, Protection data interface-1 1550, Protection data
interface-2 850, IEC61850, 2 x port (PRP)
Based on S&SD letter # 14-040883-2-30504401 dated June 12,
2014, M/s Schneider Electric from United Kingdom stone is
prequalified for MiCOM P543 as per the following conditions:
Type tests shall be carried out on the MiCOM P40 relays as
per new IEC 61850-10 (2012-12) edition 2 in the approved
Independent Testing laboratory witnessing by three (3)
National Grid SA engineers and one (1) approved Independent
Agency Inspector (IIA). All costs of witnessing the tests shall
be borne by the manufacturer as per their confirmation through
letter # Nil dated October 23, 2013.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed by the manufacturer through their letter # Nil dated
June 25, 2013.
Ordering Code, Built in Functions & Hardware shall be as the
following:
Ordering Code: P54331NL7M0D08M
Built in Functions: 87L(Dual Combined Slope), 21P&G
(5Zones,Quad+Mho+Bi), 67DEF with comm. Scheme, 79(2CBs
OR 1CB controlled)+25, 50/51PH&GR / SEF/46, 67P/ 67N, 49
Thermal Overload, 27/59/59N, 50BF, 74 DC supply supervision,
74 Trip circuit supervision, CT Supervision, 60 VT Supervision,
DFR/SOE / Fault Locator,
Hardware: 4CT+4VT+ 12BI's+12BO's, CH-1 1300nm, CH-2
850nm, IEC61850, 2 x port(PRP)
Ordering Code: P54331NR7M0D08M
Built in Functions: 87L, Under current 37,Inrush Blocking, Under
/ over Frequency 81,open conductor protection, Second
harmonic detection, 21P&G, 67DEF, 79 (1 CB or 2 CB)
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
controlled + 25, SEF, 50/51PH&GR / SEF/46, 67P/ 67N ,49
Thermal Overload, 27/59/59N, 50BF, 74 DC supply supervision,
74 Trip circuit supervision, CT Supervision, 60 VT Supervision,
DFR/SOE / Fault Locator
Hardware: 4CT+4VT+ 12BI's+12BO's, CH-1 1550nm, CH-2
850nm, IEC61850, 2 x port(PRP)
Based on S&SD letter # 14-040883-2-30504401 dated June 12,
2014, M/s Schneider Electric from United Kingdom stone is
prequalified for MiCOM P142 as per the following conditions:
Type tests shall be carried out on the MiCOM P40 relays as
per new IEC 61850-10 (2012-12) edition 2 in the approved
Independent Testing laboratory witnessing by three (3)
National Grid SA engineers and one (1) approved Independent
Agency Inspector (IIA). All costs of witnessing the tests shall
be borne by the manufacturer as per their confirmation through
letter # Nil dated October 23, 2013.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed by the manufacturer through their letter # Nil dated
June 25, 2013.
The following type tests (Change of Temperature per IEC
60068-2-14 2009, Damp Heat Steady State per IEC 60068-2-78
2002 & Damp Heat Cycle per IEC 60068-2-78 2002) for MiCOM
P142 shall be conducted in the accredited testing laboratory
witnessing by one (1) Independent Inspection Agency (IIA)
inspector and type test report shall be submitted within July
2014.
Ordering Code, Built in Functions & Hardware shall be as the
following:
Ordering Code: P14231NC7M0468J
Built in Functions: 87L High Impedance, 95 CT bus wire
supervision, 50/51PH&GR / SEF/46, 67P/ 67N , SEF,49 Thermal
Overload, 27/59/59N, 50BF, 74 DC supply supervision, 74 Trip
circuit supervision, CT Supervision, 60 VT Supervision, DFR/SOE
/ Fault Locator
Hardware: 5xCT(Ph) + 3xVT, 16 Digital Inputs, 7Digital
Outputs, IEC61850, 2 x port(PRP)
Ordering Code: P14231NC7M0468J
Built in Functions: 50/51PH&GR / SEF/46, 67P/ 67N , SEF,49
Thermal Overload, 27/59/59N, 50BF, 74 DC supply supervision,
74 Trip circuit supervision, CT Supervision, 60 VT Supervision,
DFR/SOE / Fault Locator
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Hardware: 5xCT(Ph) + 3xVT, 16 Digital Inputs, 7Digital
Outputs, IEC61850, 2 x port(PRP)
Based on S&SD letter # 14-040883-2-30504401 dated June 12,
2014, M/s Schneider Electric from Uni
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SEL
FACTORY LOCATION
United States---
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
SEL 411L
Ordering code:
0411L1X6X1C7CDXH5C424XX
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
27/59/59N
50BF
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
SEL 411L
Ordering code:
0411L1X6X1C7CEXH5C424XX
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
27/59/59N
50BF
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Siemens
FACTORY LOCATION
GERMANY---
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
7SD522
Ordering code:
7SD5221-5CB99-9HK0+L0S+M0H+N7A
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
4CT+4VT+12BIS+12BOS
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
7SD522
Ordering code:
7SD5221-5CB99-9HK0+L0S+M0J+N7A
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
4CT+4VT+12BIS+12BOS
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS
Total =
31. 7. 2
Applicable Standards:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ABB
FACTORY LOCATION
SWEDEN---
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
RED 670
Ordering code:
RET670*1.2-B30X00-A02D03E01P01-B1X-C-B-KB-B-B3B3-D1AXE
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC supply supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE
Hardware:
2-WINDING:
14xCT(Ph)+4xCT(Gnd)
3-WINDING:
16xcontact inputs
8xcontact outputs
IEC 61850 2-ports
Relay Type:
RET 670
Ordering code:
RET670*1.2-B40X00-A01A02D04E01P01-B1X-C-B-KB-B-B3B3-D
1A-XE
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
50 BF
49T
24
74 DC supply supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE
Hardware:
3-WINDING:
14xCT(Ph)+4xCT(Gnd)
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Alstom Grid
FACTORY LOCATION
United Kingdom-Stafford
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
MiCOM P 643
Ordering code:
P64332NA6M0040K
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instantaneous Diff
50/51PH&GR all windings
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC Supply Supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE
Hardware:
2-WINDING:
9xCT (Ph) + 4xCT (Gnd)
3-WINDING:
16xcontact inputs
8xcontact outputs
IEC 61850 2-ports
Relay Type:
MiCOM P 643
Ordering code:
P64532NA6M0040K
Built in Functions:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instantaneous Diff
50/51PH&GR all windings
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
74 DC Supply Supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE
Hardware:
3-WINDING:
15xCT(Ph)+3xCT(Gnd)
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
GE Multilin
FACTORY LOCATION
CANADA-Markham
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
T 60
Ordering code:
T60-K22-HKH-F8F-H6L-M8N-PXX-U8N-WXX
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC supply supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE
Hardware:
2-WINDING:
15xCT(Ph)+5xCT(Gnd)
8xcontact inputs
4xcontact outputs
3-WINDING:
IEC 61850 2-ports
Relay Type:
T 60
Ordering code:
T60-K22-HKH-F8F-H6L-M8N-P6T-U8N-WXX
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
74 DC supply supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE
Hardware:
3-WINDING:
15xCT(Ph)+5xCT(Gnd)
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Schneider Electric
FACTORY LOCATION
United Kingdom-Stone
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-040883-2-30504401 dated June 12,
2014, M/s Schneider Electric from United Kingdom stone is
prequalified for MiCOM P643 + MiCOM P849 as per the following
conditions:
Type tests shall be carried out on the MiCOM P40 relays as
per new IEC 61850-10 (2012-12) edition 2 in the approved
Independent Testing laboratory witnessing by three (3)
National Grid SA engineers and one (1) approved Independent
Agency Inspector (IIA). All costs of witnessing the tests shall
be borne by the manufacturer as per their confirmation through
letter # Nil dated October 23, 2013.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed by the manufacturer through their letter # Nil dated
June 25, 2013.
The following type tests (Thermal Withstand per IEC 60255-1
2009, Change of Temperature per IEC 60068-2-14 2009 &
Damp Heat Steady State per IEC 60068-2-78 2002) for MiCOM
P643 shall be conducted in the accredited testing laboratory
witnessing by one (1) Independent Inspection Agency (IIA)
inspector and type test report shall be submitted within July
2014.
Ordering Code, Built in Functions & Hardware shall be as the
following:
Ordering Code: P64332QA6M0B08M + P8490NA6M0A08K
Built in Functions: 87T ( Dual Combined Slope), 87REF (low
Impedance), 87REF (High Impedance), 87/50 Instantaneous
Diff, 50/51PH&GR All Windings, 67P/67N (All Windings),
27/59/25, 81U/O, 50BF, 49T, 24, 74 DC supply supervision, 74
Trip circuit supervision, CT Super. (All Windings), 60 VT
Supervision, DFR/SOE,
Hardware: 15xCT(Ph) + 3xCT(Gnd) + 4xVT, 32+16 Digital
Inputs, 16+16 Digital Outputs, IEC61850, 2 x port (PRP)
Ordering Code: P64332QA6M0B08M + P84930NE6M0A08K
Built in Functions: 87T ( Dual Combined Slope),
50/51PH&GR/SEF/46, 67P/67N, 49Therma l overload,
27/59/81/59N, 50BF74 DC supply supervision, CT Supervision,
60 VT Supervision, DFR/SOE
Hardware: 9xCT(Ph) + 3xCT(G) + 4xVT , 16+64 Digital Inputs,
16+16 Digital Outputs, IEC61850, 2 x port (PRP)
Based on S&SD letter # 14-040883-2-30504401 dated June 12,
2014, M/s Schneider Electric from United Kingdom stone is
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
prequalified for MiCOM P642 + MiCOM P849 as per the following
conditions:
Type tests shall be carried out on the MiCOM P40 relays as
per new IEC 61850-10 (2012-12) edition 2 in the approved
Independent Testing laboratory witnessing by three (3)
National Grid SA engineers and one (1) approved Independent
Agency Inspector (IIA). All costs of witnessing the tests shall
be borne by the manufacturer as per their confirmation through
letter # Nil dated October 23, 2013.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed by the manufacturer through their letter # Nil dated
June 25, 2013..
Ordering Code, Built in Functions & Hardware shall be as the
following:
Ordering Functions: P64232QD6M0B08L + P8490NA6M0A08K
Built in Functions: 87T ( Dual Combined Slope), 87REF (low
Impedance), 87REF (High Impedance), 87/50 Instantaneous
Diff, 50/51PH&GR All Windings, 67P/67N (All Windings),
27/59/25, 81U/O, 50BF, 49T, 24, 74 DC supply supervision, 74
Trip circuit supervision, CT Super. (All Windings), 60 VT
Supervision, DFR/SOE,
Hardware: 9xCT(Ph) + 3xCT(Gnd) + 4xVT, 32+12 Digital
Inputs, 16+12 Digital Outputs, IEC61850, 2 x port (PRP)
Based on S&SD letter # 14-040883-2-30504401 dated June 12,
2014, M/s Schneider Electric from United Kingdom stone is
prequalified for MiCOM 142 + MiCOM P849 as per the following
conditions:
Type tests shall be carried out on the MiCOM P40 relays as per
new IEC 61850-10 (2012-12) edition 2 in the approved
Independent Testing laboratory witnessing by three (3)
National Grid SA engineers and one (1) approved Independent
Agency Inspector (IIA). All costs of witnessing the tests shall
be borne by the manufacturer as per their confirmation through
letter # Nil dated October 23, 2013.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed by the manufacturer through their letter # Nil dated
June 25, 2013.
Ordering Code, Built in Functions & Hardware shall be as the
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
following:
Ordering Code: P14231NC7M0468J + P84930NE6M0A08K
Built in Functions: 87 High Impedance Diff Protection, SEF,
50/51+50N/51N / 46, 49 Thermal Overload, 27/59/59N,
Breaker Failure (50BF) 74DC DC SUPPLY SUPERVISION, CT
Supervision, 67P/67N, Under / Over Frequency 81, Under
current 37, 60VT Supervision, DFR/SOE/F Locator
Hardware: 5xCT(Ph) + 3xVT 16+64 Digital Inputs, 7+16 Digital
Outputs, IEC61850, 2 x port (PRP)
Ordering Code: P14231NC7M0468J
Built in Functions: 87 High Impedance Diff Protection, SEF,
50/51+50N/51N / 46, 49 Thermal Overload, 27/59/59N,
Breaker Failure (50BF) 74DC DC SUPPLY SUPERVISION, CT
Supervision, 67P/67N, Under / Over Frequency 81, Under
current 37, 60VT Supervision, DFR/SOE/F Locator
Hardware: 5xCT(Ph) + 3xVT , 16 Digital Inputs, 7 Digital
Outputs, IEC61850, 2 x port (PRP)
SEL
United States
Yes
Relay Type:
SEL487E
Ordering code:
0487E3X648XXC2X4H624XXX
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC supply supervision.
74 Lockout coil supervision
60
DFR/SOE
Hardware:
2-WINDING:
8xcontact inputs
4xcontact outputs
3-WINDING:
15xCT(Ph)+3xCT(Gnd)
IEC 61850 2 ports
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Siemens
FACTORY LOCATION
GERMANY---
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
7UT6
Ordering code:
7UT6331-5EB92-1BC1+L0S
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC supply supervision.
CT Super (All windings)
60
DFR/SOE
Hardware:
2-WINDING:
9xCT(Ph)+4xCT(Gnd)
3-WINDING:
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports
Relay Type:
7UT6
Ordering code:
7UT6351-5EB92-1BC1+L0S
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
74 DC supply supervision.
CT Super (All windings)
60
DFR/SOE
Hardware:
3-WINDING:
12xCT(Ph)+4xCT(Gnd)
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ZIV
FACTORY LOCATION
SPAIN-Madrid
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
IDV
Ordering code:
8IDVK4F22Z104SKL
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67N/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC supply supervision.
74 Lockout Coil Supervision.
CT Super (All windings)
60
DFR/SOE
Hardware:
2-WINDING:
9xCT(Ph)+2xCT(Gnd)
8xcontact inputs
4xcontact outputs
3-WINDING
IEC 61850 2 ports
Relay Type:
IDV
Ordering code:
8IDVD4F22Z904VKL
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67N/67N(All windings)
50 BF
49T
74 DC supply supervision.
74 Lockout Coil Supervision.
CT Super (All windings)
DFR/SOE
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Hardware:
3-WINDING:
12xCT(Ph)+2xCT(Gnd)
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports
Total =
31. 7. 3
Applicable Standards:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ABB
FACTORY LOCATION
SWEDEN
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
REB500 CU
Ordering code:
REB500-CU03-V76-S30-P0-B0-CA3-CB3
Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
CT Supervision
Intertrip facility
Selective Zone tripping and blocking
HMI
DFR/SOE
Hardware:
CU: 8BIs+8BOs
24 PU connected to CU
IEC 61850, 2-PORTS
Relay Type:
REB500 CU
Ordering code:
REB500-CU03-V76-S50-P0-B0-CA3-CB3
Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
CT Supervision
Intertrip facility
Selective Zone tripping and blocking
HMI
DFR/SOE
Hardware:
CU: 8BIs+8BOs
48 PU connected to CU
IEC 61850, 2-PORTS
Relay Type:
REB500 PU
Ordering code:
REB500-BU03-C2-A40-P0-F1-BB2-IO0-R0-OC0-BFP1-EFP1-PD0DR0-L0-T0+1MRB150073R0052
Built in Function:
50BF: stage1
50BF: stage2
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
End fault protection with Interntrip or Dead Zone
HMI
DFR/SOE
Hardware:
PU: 4CT+16BIS+12BOS
Alstom
United Kingdom---
Yes
Relay Type:
MICOM P740 PU
Ordering code:
P74137NA6M0510K
Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
50BF: stage2
CT Supervision
Intertrip facility
Selective Zone tripping and blocking
HMI
DFR/SOE
Hardware:
CU: 8BIS+8BOS
24 PU connected to CU
IEC 61850, 2-PORTS
Relay Type:
MICOM P740
Ordering code:
P74331NA6M0510K
Built in Function:
50BF: stage1
CT Supervision
50/51 : Phase Over current Protection
50N/51N : Earth Fault
Intertrip facility
End fault protection with interntrip or Dead Zone
HMI
DFR/SOE
Hardware:
PU: 4CT+16BIs+12BOS
IEC 61850, 2-PORTS
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SIEMENS
FACTORY LOCATION
GERMANY-Berlin
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
7SS52x CU
Ordering code:
7SS5220-4AB92-1CA0+L0R
Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
50BF: stage1
50BF: stage2
CT Supervision
50/51 : Phase Over current Protection
50N/51N : Earth Fault
Intertrip facility
End fault protection with interntrip or Dead Zone
Selective Zone tripping and blocking
HMI
DFR/SOE
Hardware:
CU: 8BIs+8BOs
24 PU connected to CU
IEC 61850, 2-PORTS
Relay Type:
7SS52x CU
Ordering code:
7SS5220-4AB92-1FA0+L0R
Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
50BF: stage1
50BF: stage2
CT Supervision
50/51 : Phase Over current Protection
50N/51N : Earth Fault
Intertrip facility
End fault protection with interntrip or Dead Zone
Selective Zone tripping and blocking
HMI
DFR/SOE
Hardware:
CU: 8BIs+8BOs
48 PU connected to CU
IEC 61850, 2-PORTS
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Relay Type:
7SS52x PU
Ordering code:
7SS5231-5CA01-1AA1
*BO=6 with double contact
Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
50BF: stage1
50BF: stage2
CT Supervision
50/51 : Phase Over current Protection
50N/51N : Earth Fault
Intertrip facility
End fault protection with interntrip or Dead Zone
Selective Zone tripping and blocking
HMI
DFR/SOE
Hardware:
PU: 4CT+16BIs+12BOS
Total =
31. 7. 4
Applicable Standards:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ABB
FACTORY LOCATION
SWEDEN
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
REL 670
Ordering code:
REL670*1.2-A31X00-H07P01-B1X-AX-KB-B-B6X0-D1A-XX-XE
Built in Function:
Control & MIMIC
21 P&GD
50N/51 P&G
67P/67N
49 Thermal Overload
Phase unbalance 46
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE
Hardware:
16 BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Schneider Electric
FACTORY LOCATION
United Kingdom-Stone
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-040883-2-30504401 dated June 12,
2014, M/s Schneider Electric from United Kingdom stone is
prequalified for MiCOM P543 as per the following conditions:
Type tests shall be carried out on the MiCOM P40 relays as per
new IEC 61850-10 (2012-12) edition 2 in the approved
Independent Testing laboratory witnessing by three (3)
National Grid SA engineers and one (1) approved Independent
Agency Inspector (IIA). All costs of witnessing the tests shall
be borne by the manufacturer as per their confirmation through
letter # Nil dated October 23, 2013.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed by the manufacturer through their letter # Nil dated
June 25, 2013.
The following type tests (Change of Temperature per IEC
60068-2-14 2009, Damp Heat Steady State per IEC 60068-2-78
2002 & Enclosure Protection per IEC 60259 2001) for MiCOM
P543 shall be conducted in the accredited testing laboratory
witnessing by one (1) Independent Inspection Agency (IIA)
inspector and type test report shall be submitted within July
2014.
Ordering Code, Built in Functions & Hardware shall be as the
following:
Ordering Code: P54331NE7M0D08M
Built in Functions: 21 P&GD / 87 L, 50/51PH&GR, 67P/ 67N, 49
Thermal Overload, Phase Unbalance 46, Under current 37,
27/59, Auto Re-closure 79, 50BF, 74 Trip circuit supervision, In
rush blocking, Under/over Frequency 81, CT Supervision, 60 VT
Supervision, Open conductor protection, second harmonic
detection, sensitive earth fault protection, DFR/SOE / Fault
Locator.
Hardware: 5CT + 4VT, 16BI+14BO, IEC61850, 2 x optical port
(PRP)
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SEL
FACTORY LOCATION
United States---
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
SEL421
Ordering code:
04214611XC2X43224XXXX
Built in Function:
Control & MIMIC
21 P&GD
50N/51 P&G
67P/67N
49 Thermal Overload
Phase Unbalance 46
Undercurrent 37
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE
Hardware:
15BI+23 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SIEMENS
FACTORY LOCATION
GERMANY-Berlin
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
7SA6x
Ordering code:
7SA6311-5BB92-2DM4+L0S
*with 20BI+09BO
**ONLY 67N
Built in Function:
Control & MIMIC
21 P&GD
50N/51 P&G
67N
49 Thermal Overload
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE
Hardware:
16 BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC
Total =
31. 7. 5
Applicable Standards:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ABB
FACTORY LOCATION
FINLAND
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
REF615
Ordering code:
HBFJAEAGNEA1BAA1XE
Built in Function:
Control & MIMIC
50N/51 P&GD
67P/67N
49 Thermal Overload
Phase Unbalance 46
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE
Hardware:
16BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
GE Multilin
FACTORY LOCATION
SPAIN--
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
F650
Ordering code:
F650-NFD-F2G1-HI-6E
Built in Function:
Control & MIMIC
50N/51 P&GD
67P/67N
49 Thermal Overload
Phase Unbalance 46
Undercurrent 37
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE
Hardware:
16BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
NR Electric Co. Ltd
FACTORY LOCATION
CHINA-Nanjing
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter# 13-07186-1-30504401 dated December
23, 2013, it is pre-qualified for 13.8 kV Plain OH Feeder + UG +
Incomer Relays, with the following condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award and
subsequently reduced yearly in case of future project award .
This was confirmed in writing by the manufacturer through their
letter # NR-SEC-20110829-CL2 dated August 29, 2011.
Relay Type:
PCS 9611
Ordering code:
PCS-9611-A1C-1B1B3A3A2A
Built in Function:
Control & Mimic
50N/51 P&GD
67P/67N
49 Thermal Overload
Phase unbalance 46
Under Current 37
27/59
Auto reclosure 79
50BF
Trip Circuit Supervision 74TC
Inrush Blocking
Under / over frequency 81
CT Supervision
60 (VT Fuse Supervision )
Sensitive earth element function
Second harmonic detection
DFR / SOE
Hardware:
16 BI+ 07 BO
3CT(Ph) + 1CT(GD)+3VT
IEC 61850, 2-Optical Ports PRP
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SCHNEIDER ELECTRIC (Telemecanique)
FACTORY LOCATION
FRANCE--
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
Sepam-80
Ordering code:
SEP888S84J33TNTLA
Along with Ordering Code, following optional modules needs to
be ordered..
1.
MES120 (59715) #2 nos.
2.
ACE850F0 interface module (59659) # 2 no.
3.
ACE850 communication cable (CCA614) # 2 no.
Built in Function:
Control & MIMIC
50N/51 P&GD
67P/67N
49 Thermal Overload
Phase Unbalance 46
Undercurrent 37
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE
Hardware:
14BI+6 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SEL
FACTORY LOCATION
United States
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
SEL-451
Ordering code:
04515611XC2X4H244XXXX
Built in Function:
Control & MIMIC
50N/51 P&GD
67P/67N
49 Thermal Overload
Phase Unbalance 46
Undercurrent 37
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE
Hardware:
16BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Siemens
FACTORY LOCATION
GERMANY---
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
7SJ64
Ordering code:
7SJ6411-5EB92-1FG1+L0S
Built in Function:
Control & MIMIC
50N/51 P&GD
67P/67N
49 Thermal Overload
Phase Unbalance 46
Undercurrent 37
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE
Hardware:
15BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC
Total =
31. 7. 6
Applicable Standards:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ABB
FACTORY LOCATION
SWEDEN
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
REC670
Ordering code:
1MRK 002 814-AC
Built in Function:
27P
50/51 P&G
Undercurrent
50_2
59B&59N
59_2
Harmonic Overload
60P&N
87V phase&neutral
67 P&G
67_2
60 VT Supervision
DFR/SOE
Hardware:
6CT+6VT+16BIs+24BOs
IEC 61850,2-PORTS
GE Multilin
CANADA-Markham
Yes
Relay Type:
C70
Ordering code:
C70-K03-HKH-F8N-H6D-M8V-P67-U6D-W67
Built in Function:
27P
50/51 P&G
Undercurrent
50_2
59B&59N
59_2
Harmonic Overload
60P&N
87V phase&neutral
67 P&G
67_2
60 VT Supervision
DFR/SOE
Hardware:
6CT+6VT+16BIs+20BOs
IEC 61850,2-PORTS
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SEL
FACTORY LOCATION
United States
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
SEL487V
Ordering code:
0487V0X6111XC2X4H424XXX
Built in Function:
27P
50/51 P&G
Undercurrent
50_2
59B&59N
59_2
Harmonic Overload
60P&N
87V phase&neutral
67 P&G
67_2
60 VT Supervision
DFR/SOE
Hardware:
6CT+6VT+15BIs+23BOs
IEC 61850,2-PORTS
Total =
31. 7. 7
Applicable Standards:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Alstom
FACTORY LOCATION
United Kingdom---
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
MVAJ
Ordering code:
MVAJ101RA0802A
Standard Specification :
Self Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)
Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of
30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)
Note-Withdrawable from Case
Relay Type:
MVAJ
Ordering code:
MVAJ105RA0802A
Standard Specification :
Hand & Electrical Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)
Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of
30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)
Note-Withdrawable from Case
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ELECTRO-SWITCH
FACTORY LOCATION
United States
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
LOR
Ordering code:
LOR/HR-7810F
Standard Specification :
Hand & Electrical Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)
Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of
30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)
Relay Type:
LOR
Ordering code:
LOR/SR-7868FD
Standard Specification :
Self Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)
Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of
30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Electrotecnica Arteche
FACTORY LOCATION
SPAIN-Mungia
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-10095-030504401 dated 31
December 2014, the manufacturer is prequalified for
Latched Tripping and lockout Relay type BI-16R HB, Ordering
Code: BI-16R HB 125 VDC Standard Specification: High burden,
flag indication, electrical reset, 16 Contacts make and carry (3
sec) AC/DC 7500VA/w with max 30A, 300V. Breaking capacity
DC 125w resistive, 60w inductive (L/R = 40ms).
Latched Tripping and lockout Relay type BI-16RP HB, ordering
code: BI-16RP HB 125 VDC, Standard Specification: High
burden, flag indication, electrical and hand reset, 16 Contacts
make and carry (3 sec) AC/DC 7500VA/w with max 30A, 300V.
Breaking capacity DC 125w resistive, 60w inductive (L/R =
40ms).
Unlatched Tripping Relay type RI-16R HB, ordering code:
BI-16RP HB 125 VDC op: 01000, Standard Specification: High
burden, LED indication, Self-reset, 16 Contacts make and carry
(3 sec) AC/DC 7500VA/w with max 30A, 300V. make and carry
continuous AC/DC 1250 VA/w with max of 5A, 300V. DC 80w
resistive, 40w inductive (L/R = 40ms).
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Relay Monitoring System (RMS)
FACTORY LOCATION
AUSTRALIA-Melbourne
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 15-02815-2-030504401 dated 30 June
2015, the manufacturer is prequalified for:
High Speed Tripping Relay ,
Type: 6RJ21
Ordering Code: 6RJ21-10-D-8M2B
High Burden Tripping Relay ,
Type: 6RJ25
Ordering Code: 6RJ25-10-D-8M2B
As conforming to National Grid SA specification # 41-TMSS-01,
Rev.0 with the following condition:
- Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award and
subsequently reduced yearly (in case of future project award).
and from the date of first delivery in case of direct material
supply order. This was confirmed in writing by the manufacturer
through their letter# Nil dated November 07, 2013.
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Siemens
FACTORY LOCATION
GERMANY---
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
TR
Ordering code:
TR241-7PG1524-1JC60-1AF0
Standard Specification :
Hand & Electrical Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)
Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of
30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)
Note-Withdrawable from Case
Relay Type:
TR
Ordering code:
TR212-7PG1521-2JC60-1AF0
Standard Specification :
Self Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)
Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of
30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)
Note-Withdrawable from Case
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Total =
31. 7. 8
Applicable Standards:
ABB
SWEDEN
Yes
Relay Type:
RED670
Ordering code:
RED670*1.2-B32X00-C24P02-B1X-C-B-KB-B-B6X0-D1AX-AAXXX
X
-XE
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (6CT+6VT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 850nm, CH-2 850nm (up to 3km)
IEC 61850 -2 Ports
Relay Type:
RED670
Ordering code:
RED670*1.2-B32X00-C24P02-B1X-C-B-KB-B-B6X0-D1AX-BBXXX
X
-XE
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (6CT+6VT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 1310nm, CH-2 1310nm (up to 80km)
IEC 61850 -2 Ports
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Alstom Grid
FACTORY LOCATION
United Kingdom-Stafford
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
MiCOM P543
Ordering code:
P54331NA7M0610M
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (5CT+4VT)
Binary Inputs 16 Inputs
Binary Outputs 14
CH-1 820nm, CH-2 820nm (up to 1km)
IEC 61850 -2 Ports
Relay Type:
MiCOM P543
Ordering code:
P54331NC7M0610M
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (5CT+4VT)
Binary Inputs 16 Inputs
Binary Outputs 14
CH-1 1300nm, CH-2 1300nm (up to 50km)
IEC 61850 -2 Ports
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
GE
FACTORY LOCATION
CANADA---
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
L90
Ordering code:
L90-K03-HKH-F8L-H6G-L6T-N67-S67-W77
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (3CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 820nm, CH-2 820nm (up to 1km)
IEC 61850 -2 Ports
Relay Type:
L90
Ordering code:
L90-K03-HKH-F8L-H6G-L6T-N67-S67-W2B
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (3CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 1300nm, CH-2 1300nm (up to 24km)
IEC 61850 -2 Ports
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Schneider Electric
FACTORY LOCATION
United Kingdom-Stone
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-040883-2-30504401 dated June 12,
2014, M/s Schneider Electric from United Kingdom stone is
prequalified for MiCOM P543 as per the following conditions:
Type tests shall be carried out on the MiCOM P40 relays as per
new IEC 61850-10 (2012-12) edition 2 in the approved
Independent Testing laboratory witnessing by three (3)
National Grid SA engineers and one (1) approved Independent
Agency Inspector (IIA). All costs of witnessing the tests shall
be borne by the manufacturer as per their confirmation through
letter # Nil dated October 23, 2013.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed by the manufacturer through their letter # Nil dated
June 25, 2013.
The following type tests (Change of Temperature per IEC
60068-2-14 2009, Damp Heat Steady State per IEC 60068-2-78
2002 & Enclosure Protection per IEC 60259 2001) for MiCOM
P543 shall be conducted in the accredited testing laboratory
witnessing by one (1) Independent Inspection Agency (IIA)
inspector and type test report shall be submitted within July
2014.
Ordering Code, Built in Functions & Hardware shall be as the
following:
Ordering Code: P54331NA7M0C08M
Built in Functions: Cable Diff. Protection, Breaker Failure
(50BF), DC supply supervision, 50/51 + 50N/51N, Current
Circuit Supervision,.
Hardware: 5 Analog Inputs CT, 4 Analog input VT, 16 Binary
Inputs-14 outputs, CH-1 820nm, CH-2 820nm (up to 1KM),
IEC61850, 2 x port (PRP),
Ordering Code: P54331NC7M0C08M
Built in Functions: Cable Diff. Protection, Breaker Failure
(50BF), DC supply supervision, 50/51 + 50N/51N, Current
Circuit Supervision.
Hardware: 5 Analog Inputs CT, 4 Analog input VT, 16 Binary
inputs-14 outputs, CH-1 1300nm ,CH-2 1300nm (up to 50KM),
IEC61850, 2 x port (PRP),
Based on S&SD letter # 14-040883-2-30504401 dated June 12,
2014, M/s Schneider Electric from United Kingdom stone is
prequalified for MiCOM P142 as per the following conditions:
Type tests shall be carried out on the MiCOM P40 relays as per
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
new IEC 61850-10 (2012-12) edition 2 in the approved
Independent Testing laboratory witnessing by three (3)
National Grid SA engineers and one (1) approved Independent
Agency Inspector (IIA). All costs of witnessing the tests shall
be borne by the manufacturer as per their confirmation through
letter # Nil dated October 23, 2013.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed by the manufacturer through their letter # Nil dated
June 25, 2013.
The following type tests (Change of Temperature per IEC
60068-2-14 2009, Damp Heat Steady State per IEC 60068-2-78
2002 & Damp Heat Cycle per IEC 60068-2-78 2002) for MiCOM
P142 shall be conducted in the accredited testing laboratory
witnessing by one (1) Independent Inspection Agency (IIA)
inspector and type test report shall be submitted within July
2014.
Ordering Code, Built in Functions & Hardware shall be as the
following:
Ordering Code: P14231NC7M0468J
Built in Functions: High Impedance Diff Protection, Internal CT
Bus-wire Supervision (95) , Breaker Failure (50BF), DC Supply
Supervision, 50/51+50N/51N, Current Circuit Supervision
Hardware: 5CT + 3 VT, 16 BI, 7 BO, IEC61850, (? 300m and
GIB), 2 x port IEC61850 (PRP)
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SEL
FACTORY LOCATION
United States
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
SEL411L
Ordering code:
0411L1X6X1C7CCXH5C424XX (2KM)
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (6CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 820nm, CH-2 820nm (up to 1km)
IEC 61850 -2 Ports
Relay Type:
SEL411L
Ordering code:
0411L1X6X1C7DDXH5C424XX (24KM)
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (6CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 1300nm, CH-2 1300nm (up to 24km)
IEC 61850 -2 Ports
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Siemens
FACTORY LOCATION
GERMANY---
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
7SD52
Ordering code:
7SD5221-5CB99-9CJ0+L0S+M0A+N0A
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (3CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 820nm, CH-2 820nm (up to 1.5km)
IEC 61850 -2 Ports
Relay Type:
7SD52
Ordering code:
7SD5221-5CB99-9CJ0+L0S+M0G+N0G
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (3CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 1300nm, CH-2 1300nm (up to 24km)
IEC 61850 -2 Ports
Total =
31. 7. 9
Applicable Standards:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ABB
FACTORY LOCATION
SWEDEN---
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
REC670
Ordering code:
REC670*1.2-A30X00-A02C31P02-B1-AA-KB-B-B6X0-D1A-XXX-X
E
Built in Function:
87 3-Phase High Z Differential
(based on Voltage)
50/51N
Internal CT Bus Wire Supervision
(based on voltage )
74TC Trip circuit Supervision
External Stabilizing Resistor
External Metrosil
External CT Shorting
Hardware:
6I+6U
24BO
16BI
IEC 61850,2-Optical Ports (PRP)
Relay Type:
REB650
Ordering code:
1MRK006520-AD
Built in Function:
87 3-Phase High Z Differential
(based on Voltage)
50/51N
Internal CT Bus Wire Supervision
(based on voltage )
74TC Trip circuit Supervision
External Stabilizing Resistor
External Metrosil
External CT Shorting
Hardware:
6I+4U
27BO
18BI
IEC 61850,2-Optical Ports (PRP)
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Alstom Grid
FACTORY LOCATION
United Kingdom-Stafford
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
MCAG
Ordering code:
MCAG34VCD*****A
Built in Function:
87 3-Phase High Z Differential (Current Base)
External CT Bus Wire Supervision
External stabilizing Resistor
External Metrosil
External CT Shorting
Hardware:
3 CT Inputs
2 Output Contacts
Relay Type:
MCAG
Ordering code:
MCAG14SSD**** *A
Built in Function:
87 3-Phase High Z Differential
(Current Base)
External CT Bus Wire Supervision
External Stabilizing Resistor
External Metrosil
External CT Shorting
Hardware:
1 CT Phase Inputs
2 Output Contacts
Relay Type:
MFAC
Ordering code:
MFAC34V1B*0001A
Built in Function:
87 3-Phase High Z Differential
(Based on Voltage)
External CT Bus Wire Supervision
Internal Stabilizing Resistor
External Metrosil
External CT Shorting
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Hardware:
3 elements / phases voltage based
2 Output Contacts
Relay Type:
MFAC
Ordering code:
MFACI4S1B*0001A
Built in Function:
87 3-Phase High Z Differential.
(Based on Voltage)
External CT Bus Wire Supervision
Internal Stabilizing Resistor
External Metrosil
External CT Shorting
Hardware:
1 elements / phases voltage based
4 Output Contacts
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Schneider Electric
FACTORY LOCATION
United Kingdom-Stone
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-040883-2-30504401 dated June 12,
2014, M/s Schneider Electric from United Kingdom stone is
prequalified for MiCOM P142 as per the following conditions:
Type tests shall be carried out on the MiCOM P40 relays as per
new IEC 61850-10 (2012-12) edition 2 in the approved
Independent Testing laboratory witnessing by three (3)
National Grid SA engineers and one (1) approved Independent
Agency Inspector (IIA). All costs of witnessing the tests shall
be borne by the manufacturer as per their confirmation through
letter # Nil dated October 23, 2013.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed by the manufacturer through their letter # Nil dated
June 25, 2013.
The following type tests (Change of Temperature per IEC
60068-2-14 2009, Damp Heat Steady State per IEC 60068-2-78
2002 & Damp Heat Cycle per IEC 60068-2-78 2002) for MiCOM
P142 shall be conducted in the accredited testing laboratory
witnessing by one (1) Independent Inspection Agency (IIA)
inspector and type test report shall be submitted within July
2014.
Ordering Code, Built in Functions & Hardware shall be as the
following:
Ordering Code: P14231NH7M0468J
Built in Functions: 87 3-Phase High Z Differential, 50/51N, CT
Bus-wire Supervision (95), TCS : Trip Circuit Supervision, 74 DC
supply supervision, External stabilizing resistor, External
Metrosil Resistor, External CT shorting
Hardware: 5CT + 3 VT, 16 BI, 5CT Input+3 VT input, 8 BI, 11
BO, IEC61850, 2 optical ports (PRP)
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SIEMENS
FACTORY LOCATION
GERMANY
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
7SJ64
Ordering code:
7SJ6411-5EB92-1FE0+L0S
Built in Function:
87 3-Phase High Z Differential
(based on current)50/51N
Internal CT Bus Wire Supervision
(based on current )
74TC Trip circuit Supervision
External Stabilizing Resistor
External Metrosil
External CT Shorting
Hardware:
4 CT Inputs
13BO
15BI
IEC 61850, 2-Optical Ports (PRP)
Total =
31. 7. 10
Auxiliary Relays
Applicable Standards:
ABB
SWEDEN---
Yes
Relay Type:
RXMVB2
Ordering code:
RK 251 204-AP (125V DC)
RK 251 204-AN (110v DC)
Built in Function:
CT Shorting
Hardware:
Alstom
United Kingdom---
Yes
Relay Type:
MVTP31
Ordering code:
MVTP31V1CB0751E
Built in Function:
CT Supervision
Hardware:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Electrotecnica Arteche
FACTORY LOCATION
SPAIN-Mungia
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-10095-030504401 dated 31
December 2014, the manufacturer is prequalified for
Relay type VDF- 10, ordering code VDF- 10 125 VDC, built-in
function: Trip circuit supervision - single phase, LED indication
and two contacts.
Relay type VDJ- 30, ordering code VDJ- 30 125 VDC, built-in
functions: Trip circuit supervision - three phase, LED indication
and two contacts.
Relay type RTU-4, ordering code RTU-4 125 VDC, built-in
functions: Auxiliary supply supervision, Self-Reset, LED
indication and (4) contacts.
Relay type RJ-8, ordering code RJ-8 125 VDC Op: 01101,
built-in functions: Auxiliary Control, Self-Reset and (8)
contacts.
Relay type RF-4, ordering code RF-4 125 VDC Op: 01101,
built-in functions: Auxiliary Control, Self-Reset and (4)
contacts.
Relay type BJ-8 RP, ordering code BJ-8 RP 125 VDC, built-in
functions: CT shorting application, flag indication, electrical and
hand reset and (8) contacts.
Relay type BF-4 RP, ordering code BF-4 RP 125 VDC, built-in
functions: CT shorting application, flag indication, electrical and
hand reset and (4) contacts.
Relay type TDJ-8, ordering code TDJ-8 125 VDC, built-in
functions: time-lag, LED indication, (8) timed contacts (10
functions,16 timing ranges from 30ms to 99 hours).
Relay type TDF-4, ordering code TDF-4 125 VDC, built-in
functions: time-lag, LED indication, (4) timed contacts (10
functions,16 timing ranges from 30ms to 99 hours).
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SIEMENS
FACTORY LOCATION
GERMANY
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Relay Type:
AR 901
Ordering code:
7PG1110-7AE10-0AF0
Built in Function:
CT Shorting
Hardware:
Total =
31. 7. 11
Applicable Standards:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Schneider Electric
FACTORY LOCATION
United Kingdom-Stone
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-040883-2-30504401 dated June 12,
2014, M/s Schneider Electric from United Kingdom stone is
prequalified for MiCOM P142 as per the following conditions:
Type tests shall be carried out on the MiCOM P40 relays as per
new IEC 61850-10 (2012-12) edition 2 in the approved
Independent Testing laboratory witnessing by three (3)
National Grid SA engineers and one (1) approved Independent
Agency Inspector (IIA). All costs of witnessing the tests shall
be borne by the manufacturer as per their confirmation through
letter # Nil dated October 23, 2013.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed by the manufacturer through their letter # Nil dated
June 25, 2013.
The following type tests (Change of Temperature per IEC
60068-2-14 2009, Damp Heat Steady State per IEC 60068-2-78
2002 & Damp Heat Cycle per IEC 60068-2-78 2002) for MiCOM
P142 shall be conducted in the accredited testing laboratory
witnessing by one (1) Independent Inspection Agency (IIA)
inspector and type test report shall be submitted within July
2014.
Ordering Code, Built in Functions & Hardware shall be as the
following:
Ordering Code: P14231NC7M0468J
Built in Functions: 67P/67N, 50 N / 51PH&GR, SEF, 49 Thermal
Overload, 27/59/59N, 50BF, 74DC DC\ circuit supervision, 74
Trip circuit supervision, CT Supervision, VT Supervision, Stub
protection, DFR/SOE / Fault Locator
Hardware: 5CT + 3 VT, 16 BI, 7 BO, IEC61850, 2 x port (PRP)
Total =
31. 7. 12
Applicable Standards:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Schneider Electric
FACTORY LOCATION
United Kingdom-Stone
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-040883-2-30504401 dated June 12,
2014, M/s Schneider Electric from United Kingdom stone is
prequalified for MiCOM P142 as per the following conditions:
Type tests shall be carried out on the MiCOM P40 relays as per
new IEC 61850-10 (2012-12) edition 2 in the approved
Independent Testing laboratory witnessing by three (3)
National Grid SA engineers and one (1) approved Independent
Agency Inspector (IIA). All costs of witnessing the tests shall
be borne by the manufacturer as per their confirmation through
letter # Nil dated October 23, 2013.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed by the manufacturer through their letter # Nil dated
June 25, 2013.
The following type tests (Change of Temperature per IEC
60068-2-14 2009, Damp Heat Steady State per IEC 60068-2-78
2002 & Damp Heat Cycle per IEC 60068-2-78 2002) for MiCOM
P142 shall be conducted in the accredited testing laboratory
witnessing by one (1) Independent Inspection Agency (IIA)
inspector and type test report shall be submitted within July
2014.
Ordering Code, Built in Functions & Hardware shall be as the
following:
Ordering Code: P14231NC7M0468J
Built in Functions: 2 CB breaker Failure, CBF reset by Under
current, CBF reset by CB status, Pole discrepancy, 50BF, 74
Trip circuit supervision, 50/51/67+50N/51N/67N+46,
27/59/59N, Fuse Fail supervision, DFT/SOE
Hardware: 5xCT(Ph) + 3xVT, 16 Digital Inputs, 7 Digital
Outputs, IEC61850, 2 portx (PRP)
Total =
31. 7. 13
Applicable Standards:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Schneider Electric
FACTORY LOCATION
United Kingdom-Stone
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-040883-2-30504401 dated June 12,
2014, M/s Schneider Electric from United Kingdom stone is
prequalified for MiCOM P142 as per the following conditions:
Type tests shall be carried out on the MiCOM P40 relays as per
new IEC 61850-10 (2012-12) edition 2 in the approved
Independent Testing laboratory witnessing by three (3)
National Grid SA engineers and one (1) approved Independent
Agency Inspector (IIA). All costs of witnessing the tests shall
be borne by the manufacturer as per their confirmation through
letter # Nil dated October 23, 2013.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed by the manufacturer through their letter # Nil dated
June 25, 2013.
The following type tests (Change of Temperature per IEC
60068-2-14 2009, Damp Heat Steady State per IEC 60068-2-78
2002 & Damp Heat Cycle per IEC 60068-2-78 2002) for MiCOM
P142 shall be conducted in the accredited testing laboratory
witnessing by one (1) Independent Inspection Agency (IIA)
inspector and type test report shall be submitted within July
2014.
Ordering Code, Built in Functions & Hardware shall be as the
following:
Ordering Code: P14231NC7M0468J
Built in Functions: 87 High Impedance, 50/51PH&GR / SEF/46,
67P/ 67N, 49 Thermal Overload, 27/59/59N, 50BF, 74 DC
supply supervision, 74 Trip circuit supervision, CT Supervision,
60 VT Supervision, DFR/SOE / Fault Locator
Hardware: 5xCT(Ph) + 3xVT, 16 Digital Inputs, 7 Digital
Outputs, IEC61850, 2 x (PRP)
Total =
31. 7. 14
Applicable Standards:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Schneider Electric
FACTORY LOCATION
United Kingdom-Stone
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-040883-2-30504401 dated June 12,
2014, M/s Schneider Electric from United Kingdom stone is
prequalified for MiCOM P643 as per the following conditions:
Type tests shall be carried out on the MiCOM P40 relays as
per new IEC 61850-10 (2012-12) edition 2 in the approved
Independent Testing laboratory witnessing by three (3)
National Grid SA engineers and one (1) approved Independent
Agency Inspector (IIA). All costs of witnessing the tests shall
be borne by the manufacturer as per their confirmation through
letter # Nil dated October 23, 2013.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed by the manufacturer through their letter # Nil dated
June 25, 2013.
The following type tests (Thermal Withstand per IEC 60255-1
2009, Change of Temperature per IEC 60068-2-14 2009 &
Damp Heat Steady State per IEC 60068-2-78 2002) for MiCOM
P643 shall be conducted in the accredited testing laboratory
witnessing by one (1) Independent Inspection Agency (IIA)
inspector and type test report shall be submitted within July
2014.
Ordering Code, Built in Functions & Hardware shall be as the
following:
Ordering Code: P64332QA6M0B08M
Built in Functions: 87T ( Dual Combined Slope), 87REF (low
Impedance), 87REF (High Impedance), 87REF , 87/50
Instantaneous Diff, 67P/67N (All Windings), 50/51PH&GR All
Windings, , 27/59, 81U/O, 50BF, 49T, 24, 74 DC supply
supervision, 74 Trip circuit supervision, CT Super. (All
Windings), 60 VT Supervision, DFR/SOE,
Hardware: 9xCT(Ph) + 3xCT(Gnd) + 4xVT, 16 Digital Inputs,
16 Digital Outputs, IEC61850, 2 x port (PRP)
Total =
31. 7. 15
Applicable Standards:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Schneider Electric
FACTORY LOCATION
United Kingdom-Stone
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-040883-2-30504401 dated June 12,
2014, M/s Schneider Electric from United Kingdom stone is
prequalified for MiCOM P543 as per the following conditions:
Type tests shall be carried out on the MiCOM P40 relays as
per new IEC 61850-10 (2012-12) edition 2 in the approved
Independent Testing laboratory witnessing by three (3)
National Grid SA engineers and one (1) approved Independent
Agency Inspector (IIA). All costs of witnessing the tests shall
be borne by the manufacturer as per their confirmation through
letter # Nil dated October 23, 2013.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed by the manufacturer through their letter # Nil dated
June 25, 2013.
The following type tests (Change of Temperature per IEC
60068-2-14 2009, Damp Heat Steady State per IEC 60068-2-78
2002 & Enclosure Protection per IEC 60259 2001) for MiCOM
P543 shall be conducted in the accredited testing laboratory
witnessing by one (1) Independent Inspection Agency (IIA)
inspector and type test report shall be submitted within July
2014.
Ordering Code, Built in Functions & Hardware shall be as the
following:
Ordering Code: P54331NE7M0C08M
Built in Functions: Open Conductor , Protection for primary
cables, Second harmonic detection, under/ over frequency, In
rush blocking, Under & Over Frequency 81, 87L, 21 P&G,
67DEF, 79 + 25 (1CB), ,50/51 P&G + 46, SEF, 67P/67N, 49
Thermal Overload, 27/59/59N, 50 BF, 74 Trip circuit
supervision, 74DC DC circuit supervision, CT Supervision, 60 VT
Supervision, DFR/SOE / Fault Locator
Hardware: 5xCT(Ph) + 4xVT, 16 Digital Inputs, 14 Digital
Outputs, Protection data interface-1 1300, Protection data
interface-2 1300, IEC61850, 2 x optical port(fiber) (PRP)
Total =
31
.8
31. 8. 0
TERMINAL BLOCK
TERMINAL BLOCK
Applicable Standards:
31-TMSS-06
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Connectwell industries Pvt. Ltd.
FACTORY LOCATION
INDIA-Dombivli
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter# 13-07512-030504401 dated December
09, 2013, it is pre-qualified for terminal blocks as conforming to
National Grid SA specification # 31-TMSS-06, Rev.0 with the
following condition:
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer Connectwell industries
Pvt. Ltd., India through their letter # Nil dated November 27,
2012.
ENTRELEC
FRANCE
Yes
PHOENIX
GERMANY
Yes
WEIDMULLER
GERMANY
Yes
GERMANY-Bamberg
Yes
31
.9
31. 9. 0
FAULT RECORDERS
FAULT RECORDERS
Applicable Standards:
AMETEK (ROCHESTER)
United States
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ERL Phase Power Technologies Ltd
FACTORY LOCATION
CANADA-Winnipeg/Manitoba state
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 15-01879/02-030504401 dated April
28, 2015, the manufacturer is prequalified to supply TESLA
4000 Fault Recorder with the following conditions:
- Ten (10) years extended for the TESLA 4000 Fault recorder
from the date of PAC of the turnkey project in case of contract
award or date of delivery in case of direct material supply
order. as confirmed through the manufacturer letter # Nil dated
18.10.2013.
- Type tests shall be conducted on the first order as confirmed
through the manufacturer letter No. Nil dated 9.02.2014 and
letter No. Nil dated 04.03.2015 in presence of three (03)
SEC/National Grid SA Engineers and one (01) SEC/National Grid
SA approved IIA inspector. All the cost pertaining to the type
tests shall be borne by the manufacturer.
QUALITROL HATHAWAY
NORTHERN IRELAND
Yes
Total =
31
. 10
31. 10. 0
Applicable Standards:
DIgSILENT GmbH
GERMANY
Yes
United States
Yes
QUALITROL HATHAWAY
NORTHERN IRELAND
Yes
38-TMSS-06
SER
31
. 11
31. 11. 0
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Applicable Standards:
ABB Automation Co. Ltd.
Saudi Arabia-Riyadh
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ABB Switzerland Ltd.( Global SAS Center)
FACTORY LOCATION
SWITZERLAND-Baden
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter# 14-00953-1-30504401 dated February
27, 2014, ABB Switzerland Ltd.( Global SAS Center), Baden,
Switzerland is pre-qualified for Engineering, integration and
testing of SAS systems for substations up to 380 kV against
specification # TES-P-107.01, Rev.00 with the following
conditions:
Type test shall be conducted on The SAS System as per
National Grid SA Specifications/Standards, IEC61850 Edition2,
and latest amendments of IEC in an accredited laboratory in
presence of three (03) SEC/National Grid SA engineers and one
(01) National Grid SA approved Independent Inspection Agency
(IIA) Inspector. All costs of which shall be borne by the
manufacturer.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order. This was
confirmed in writing by ABB Switzerland Ltd. ( Global SAS
Center), through their letter # Nil dated April 29, 2012.
Bay Controller Unit (BCU) shall be type
REC670*1.2-B30X00-P02-B1X-BE-KB-B-B6X0-D1AD1D1D1-XXXXE.
All the protection IEDs shall be as per section 31.7 National
Grid SA list of technically acceptable manufacturers.
Station Computer, Gateway, EWS and OWS shall be from
Advantech Taiwan.
SAS network shall be provided with SAS oriented Industrial
Ethernet Switches per SEC/National Grid SA approved list.
Software shall be Micro SCADA.
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ALSTOM Grid AG
FACTORY LOCATION
Saudi Arabia-Al-Khobar
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter# 14-00832-2-30504401 dated February
27, 2014, ALSTOM Grid AG France Montpelier/ U.K Stafford
with integration and testing facility in Al-Khobar, KSA is
pre-qualified for substations rated up to 380 kV against
specification # TES-P-107.01, Rev.00 with the following
conditions:
Type test shall be conducted on The SAS System as per
National Grid SA Specifications/Standards, IEC61850 Edition2,
and latest amendments of IEC in an accredited laboratory in
presence of three (03) SEC/National Grid SA engineers and one
(01) National Grid SA approved Independent Inspection Agency
(IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer by ALSTOM Grid AG France, U.K through their
letter SAS/TSSD/2014/WR1201-1 dated January 12, 2014.
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Schneider Electric- France/Lattes
FACTORY LOCATION
Saudi Arabia-Riyadh
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on the S & SD letter# 14-00571-1-30504401 dated April
20, 2014, Schneider Electric, Lattes, France is prequalified for
Substation Automation System (SAS) for substations up to 380
kV with Integration and Testing of SAS (to be performed only
by Schneider Electric), at EPS factory Riyadh K.S.A subject to
the following conditions:
Type test shall be conducted on The SAS System as per
National Grid SA Specifications/Standards, IEC 61850 Edition 2,
and latest amendments of IEC in an accredited laboratory in
presence of three (03) SEC/National Grid SA engineers and one
(01) National Grid SA approved Independent Inspection Agency
(IIA) Inspector. All costs of which shall be borne by the
manufacturer.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order. This was
confirmed in writing by Schneider Electric, through their letter #
Nil dated January 05, 2013.
SAS Equipment:
Bay Controller Unit (BCU)
Type MiCOM C264 with ordering codes as follows:
1- For all bays except for Transformers (HV side):
MiCOM C264M11I69100126030000U1111N10 {96 DI + 30 DO,
4 CT (Ph) + 5 VT}
2- For Transformer Bays (HV side):
MiCOM C264M11I691001260300A0U1111N10 {96 DI + 30 DO,
4CT (Ph) + 5 VT + 8 AI}( 8 Analog Current Inputs selectable
4-20 mA, 0-1 mA, 0-5 mA, 0-10 mA, 0-20 mA )
3- For Common BCU:
MiCOM C264L11I6910002D010000U1111N10 { 208 DI + 10
DO}
4- For ABTS/ ACCS:
MiCOM C264L11I691000250300A0U1111N10 {80 DI + 30 DO +
8 AI}
( 8 Analog Current Inputs selectable 4-20 mA, 0-1 mA, 0-5 mA,
0-10 mA, 0-20 mA )
Station Computers: Advantech (Taiwan).
Gateway: Advantech (Taiwan).
EWS: Advantech (Taiwan).
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Siemens - Germany/Nurnberg
FACTORY LOCATION
Saudi Arabia-Jeddah
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on the S&SD letter# 14-03345-02-30504401 dated May
20, 2014, SIEMENS -Germany is prequalified for Substation
Automation System (SAS) with Integration and Testing at
SIEMENSJeddah K.S.A up to 380kV projects subject to the
following conditions:
Type tests shall be carried out for SAS components as per
National Grid SA requirements latest revision of IEC 61850
(edition 2) on the approved Independent Testing laboratory
witnessing by three (3) National Grid SA engineers and one (1)
approved Independent Agency Inspector (IIA). All costs of
witnessing the tests shall be borne by the Siemens Jeddah
K.S.A as per their confirmation through letter # Nil dated April
21, 2014.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery in case of direct material supply order as
confirmed from SIEMENS -Germany & for Integration & Testing
facility at SIEMENS Jeddah K.S.A the Siemens-Germany &
Siemens Jeddah K.S.A through their letter # Nil dated
November 12, 2012.
SAS Equipment:
Bay Controller Unit (BCU) : type 6MD6 from SIEMENS
Germany is with ordering code (6MD6631-4EB90-0AA4+L0S)
shall be used.
Station Computers: Advantech (Taiwan).
Gateway: Advantech (Taiwan).
EWS: Advantech (Taiwan).
OWS: Advantech (Taiwan).
Ruggedized Ethernet Switches: SAS network shall be
provided with ruggedized SAS oriented Industrial type Ethernet
Switches per National Grid SA approved list
Software: Latest version of SICAM PAS/PAS CC/SCC.
Protection IEDS: From Manufacturers listed in section 31.7 of
the data base of Approved Manufacturers.
Total =
32
32
.1
32. 1. 0
METERS
Applicable Standards:
40-TMSS-02
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Saudi Arabia-Riyadh
Yes
ELSTER
United States
Yes
GEC MEASUREMENT
United Kingdom
Yes
ISKRA MIS
SLOVENIA-KRANJ
Yes
SWITZERLAND-Zug
Yes
SIEMENS
GERMANY
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
TYCO ELECTRONICS (UK) Ltd - CROMPTON
INSTRUMENTS
FACTORY LOCATION
United Kingdom--
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD Letters (08-F00975/01-03032301 dated June
04, 2008), (10-F00230/01-03032301 dated February 03, 2010)
& (11-F03017/01-03032301 dated October 16, 2011). Integra
(1530, 1540, &1630) are prequalified for Digital Metering
Devices (NOT FOR BULK ENERGY METERS) as confirming to SEC
Specification # 40-TMSS-02, Rev.0 with the following condition:
Five (05) years extended warranty from the date of PAC of
the First turnkey project in case of contract award or date of
the First delivery in case of direct material supply order. This
was confirmed by TYCO Electronic UK through their letter #
INT-SEC-06 dated January 03, 2008 and its Amendment dated
November 21, 2011.
Total =
32
.2
32. 2. 0
Applicable Standards:
AREVA
FRANCE
Yes
CELSA
ITALY
Yes
CEWE
SWEDEN--
Yes
ENTES
TURKEY-ISTANBUL
Yes
40-TMSS-02
ISKRA MIS
SLOVENIA-KRANJ
Yes
SCHNEIDER ELECTRIC
CANADA--
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
TYCO ELECTRONICS (UK) Ltd - CROMPTON
INSTRUMENTS
FACTORY LOCATION
United Kingdom--
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD Letters (08-F00975/01-03032301 dated June
04, 2008), (10-F00230/01-03032301 dated February 03, 2010)
& (11-F03017/01-03032301 dated October 16, 2011). Integra
(1530, 1540, &1630) are prequalified for Digital Metering
Devices as confirming to SEC Specification # 40-TMSS-02,
Rev.0 with the following condition:
Five (05) years extended warranty from the date of PAC of
the First turnkey project in case of contract award or date of
the First delivery in case of direct material supply order. This
was confirmed by TYCO Electronic UK through their letter #
INT-SEC-06 dated January 03, 2008 and its Amendment dated
November 21, 2011.
Total =
32
.3
32. 3
Applicable Standards:
40-TMSS-03
Saudi Arabia-Riyadh
Yes
Saudi Arabia-RIYADH
Yes
(AMI)
Based on S&SD letter # 15-03460-30504401 dated April 22,
2015, The manufacturer is prequalified to supply Advance
Metering Infrastructure (AMI) as conforming to National Grid SA
specification # 40-TMSS-03, Rev.01with the following condition:
Ten (10) years extended warranty in respect of the defects
due to design, manufacturing, installation and workmanship
from the date of the Provisional Acceptance Certificate (PAC)
of the first turnkey project (in case of contract award) and from
the date of first delivery in case of direct material supply order
shall be provided as confirmed by the manufacturer through
their letter # AES-AMI-PQA-2014/001 dated July 09th, 2014.
ALps Technologies
FRANCE-ANNECY-LE-VIEUX CEDEX
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Electro Industries / GaugeTech
FACTORY LOCATION
United States-New York
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter 13-00862/03-030504401 dated April 20,
2013, Electro Industries/ GaugeTech, New York, USA is
pre-qualified for Power Quality Meters type NEXUS 1500 as
conforming to National Grid SA specification # 40-TMSS-03,
Rev.0, with the following conditions:
Product Support: Continuous supply and product support of
Power Quality Meters type NEXUS 1500 to all SEC/National Grid
SA approved AMR Manufacturers for a minimum period of ten
(10) years shall be ensured as confirmed through their letter #
Nil dated January 01, 2012.
Product Demo: EIG Tech USA in coordination with their Local
Agent (Ideal Technical Solutions, Riyadh) shall demonstrate the
hardware and software capability and the features of NEXUS
1500 Power Quality Meters during the proposed Live Demo of
the AMR system to be conducted on the first order in presence
of SEC/National Grid SA Engineers as already confirmed through
item # 8 of ITS letter # L1-NG01-J13-006 dated February06,
2013.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery of direct material supply order as
confirmed by Electro Industries /Gauge Tech -New York, USA
through their letter # L1-NG01-J13-004 dated January 29,
2013.
ELSTER
United States
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Ideal Technical Solutions (ITS)
FACTORY LOCATION
Saudi Arabia-Riyadh
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
AMI
Based on S&SD Letter 14-00090-1-30504401 dated January
09, 2014, it is pre-qualified for Advance Metering Infrastructure
(AMI) systems as conforming to National Grid SA Specification #
40-TMSS-03, Rev. 01 with the following conditions:
- Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or date of
first delivery in case of direct material supply order as confirmed
through Ideal Technical Solutions (ITS), KSA, Riyadh letter
#W1-NG01-J14-001 dated January 01,2014 and
Letter#L1-NG01-J14-001 dated December 03, 2013.
- System Demo: Live Demo of the AMI System will be conducted
in presence of SEC/National Grid SA Engineers on the first
system to be manufactured in SEP factory already confirmed
through Ideal Technical Solutions (ITS), KSA, Riyadh letter
#L1-NG01-J14-002, dated January 06,2014.
AMR
Based on S&SD Letter 13-00971-1-30504401 dated May 15,
2013, it is pre-qualified for AMR system as conforming to
National Grid SA Specification # 40-TMSS-03, Rev.0 with the
following conditions:
Ten (10) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award)or date of
first delivery in case of direct material supply order as confirmed
through Ideal Technical Solutions (ITS), KSA, Riyadh letter #
W1-NG01-J13-001 dated January 08, 2013 and L1-ST12-020
dated December 03, 2012.
ITS Integration & Test Facility: as per item# 3.a of ITS letter#
L1-NG01-J13-003 dated January 26, 2013.
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Landis + Gyr AG-Zug
FACTORY LOCATION
SWITZERLAND-Zug
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter 14-04075-30504401 dated July 01,
2014, it is pre-qualified for Revenue Meters Type E650 (ZXD) &
E850 (ZXQ) conforming to National Grid SA specifications #
40-TMSS-03, Rev.1 and 40-TMSS-02 Rev.0 with the following
conditions:
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order. This was
confirmed by the manufacturer through their letter # Nil, dated
January 30, 2014.
E650 (ZXD) & E850 (ZXQ) [This meters are approved for
Revenue Meter application only].
Software for both meters [(E650 (ZXD) & E850 (ZXQ)] shall be
MAP120 and MAP110 .
Total =
33
33
.1
33. 1. 0
CAPACITOR
SHUNT CAPACITOR
SHUNT CAPACITOR
Applicable Standards:
43-TMSS-01
Yes
ABB
SWEDEN
Yes
FINLAND-Tampere
Yes
Eaton
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD fax ref.#08-F0623/01-03032301 dated
02/12/2008.
Pre-Qualified for Capacitor Bank (13.8kV through 380kV) with
this conditions:
-First batch shall be type test in an independent laboratory in
presence of (3) SEC engineers & (1) independent inspector.
-(10) years warranty
Based on TS&SD Letter # 11-02016/01-03032301 dated
06/07/2011, it is pre-qualified for Substation Type 13.8kV to
36kV Only Shunt Capacitor Banks as confirming to SEC
specification # 43-TMSS-01, Rev.0 with the following condition:
Ten (10) years extended warranty from the date of PAC of
the turnkey project in case of contract award or date of
delivery in case of direct material supply order. This was
confirmed by SAMWAHA through letter # Nil dated 12/03/2010.
Schneider Electric
FRANCE-Pringy
Yes
VISHAY ELECTRONICS
34
34
.1
34. 1. 0
35
.1
Yes
Total =
ELECTRONIC COMPONENTS
NEST OY/NAPS
35
CZECH REPUBLIC-BLATNA
Applicable Standards:
FINLAND
Yes
INSTRUMENT TRANFORMERS
SER
35. 1. 0
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
Applicable Standards:
ABB ( T& D)
United States-N/A
Yes
ABB EJF
CZECH REPUBLIC
Yes
Electrotecnica Arteche
SPAIN-Mungia
Yes
REMARKS
50-TMSS-01
United States
Yes
Croatia/Hrvatska--
Yes
All Type, Special, Routine tests per SEC Standards and IEC to
be performed at KONCAR-Electrical Institute Inc. as
independent and accredited testing laboratory. Extended
guarantee/warrenty for 10 years.
United States
Yes
KWK MESWANDLER
GERMANY
Yes
RING TYPE
MEMF
Saudi Arabia-RIYADH
Yes
PFIFFNER
SWITZERLAND
Yes
SADTEM
FRANCE
Yes
SIEMENS
United States
Yes
STE
ITALY
Yes
12
SER
35
.2
35. 2. 0
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
69KV CTS
69KV CTS
Applicable Standards:
ABB
SWEDEN
Yes
ABB ( T& D)
United States-N/A
Yes
BELGIUM
Yes
ALSTOM Grid
United States-Waynesboro
Yes
50-TMSS-01
AREVA
United Kingdom
Yes
E. PFIFFNER
SWITZERLAND
Yes
Electrotecnica Arteche
SPAIN-Mungia
Yes
United States
Yes
HAEFELY-TRENCH ELECTRIC
SWITZERLAND
Yes
HAEFELY-TRENCH ELECTRIC
FRANCE
Yes
Croatia/Hrvatska--
Yes
All Type, Special, Routine tests per SEC Standards and IEC to
be performed at KONCAR-Electrical Institute Inc. as
independent and accredited testing laboratory. Extended
guarantee/warrenty for 10 years.
United States
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
KWK MESWANDLER
GERMANY
Yes
RING TYPE
NISSIN
JAPAN
Yes
PFIFFNER
SWITZERLAND
Yes
SADTEM
FRANCE
Yes
SIEMENS
United States
Yes
STE
ITALY
Yes
TRENCH ITALIA
ITALY-N/A
Yes
35
.3
35. 3. 0
19
Applicable Standards:
ABB
SWEDEN
Yes
ABB ( T& D)
United States-N/A
Yes
BELGIUM
Yes
ALSTOM Grid
United States-Waynesboro
Yes
50-TMSS-01
AREVA
United Kingdom
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Electrotecnica Arteche
FACTORY LOCATION
SPAIN-Mungia
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter 12-03192-02-30504001 dated February
19, 2012, it is pre-qualified for 110 132 kV Current
Transformers (CTs) as confirming to SEC Specification #
50-TMSS-01 Rev.0 with the following conditions:
SWITZERLAND
Yes
HAEFELY-TRENCH ELECTRIC
FRANCE
Yes
Croatia/Hrvatska--
Yes
All Type, Special, Routine tests per SEC Standards and IEC to
be performed at KONCAR-Electrical Institute Inc. as
independent and accredited testing laboratory. Extended
guarantee/warrenty for 10 years.
United States
Yes
KWK MESWANDLER
GERMANY
Yes
RING TYPE
NISSIN
JAPAN
Yes
PFIFFNER
SWITZERLAND
Yes
SADTEM
FRANCE
Yes
STE
ITALY
Yes
TRENCH ITALIA
ITALY-N/A
Yes
35
.4
35. 4. 0
16
230KV CTS
230KV CTS
Applicable Standards:
ABB
SWEDEN
Yes
ABB ( T& D)
United States-N/A
Yes
50-TMSS-01
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
BELGIUM
Yes
ALSTOM Grid
United States-Waynesboro
Yes
REMARKS
AREVA
United Kingdom
Yes
HAEFELY-TRENCH ELECTRIC
SWITZERLAND
Yes
HAEFELY-TRENCH ELECTRIC
FRANCE
Yes
United States
Yes
KWK MESWANDLER
GERMANY
Yes
RING TYPE
NISSIN
JAPAN
Yes
PFIFFNER
SWITZERLAND
Yes
SADTEM
FRANCE
Yes
STE
ITALY
Yes
TRENCH ITALIA
ITALY-N/A
Yes
35
.5
35. 5. 0
14
380KV CTS
380KV CTS
Applicable Standards:
ABB
SWEDEN
Yes
ABB ( T& D)
United States-N/A
Yes
BELGIUM
Yes
ALSTOM Grid
United States-Waynesboro
Yes
50-TMSS-01
AREVA
United Kingdom
Yes
HAEFELY-TRENCH ELECTRIC
SWITZERLAND
Yes
HAEFELY-TRENCH ELECTRIC
FRANCE
Yes
United States
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
KWK MESWANDLER
GERMANY
Yes
RING TYPE
NISSIN
JAPAN
Yes
PFIFFNER
SWITZERLAND
Yes
All type, routine & special tests including the load test shall
be carried out on the first batch to be supplied to SEC in
securing an order in an independent testing laboratory in the
presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.
SADTEM
FRANCE
Yes
STE
ITALY
Yes
TRENCH ITALIA
ITALY-N/A
Yes
36
36
.1
36. 1. 0
14
POTENTIAL TRANSFORMER
Applicable Standards:
ABB ( T& D)
United States-N/A
Yes
ABB EJF
CZECH REPUBLIC
Yes
BELGIUM
Yes
AREVA
United Kingdom
Yes
E. PFIFFNER
SWITZERLAND
Yes
50-TMSS-03
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Electrotecnica Arteche
FACTORY LOCATION
SPAIN-Mungia
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD Letter 12-03192-02-30504001 dated February
19, 2012, it is pre-qualified for 33 kV & 34.5 kV Potential
Transformers (PT) as confirming to SEC Specification
#50-TMSS-03 Rev.0 with the following conditions:
All Type, Routine and Special testes shall be carried out the
complete tests in one (1) sample of the first batch of 33 kV &
34.5 kV Potential Transformers (PT) in an Independent Testing
Laboratory in the presence of three (3) SEC Engineers & one
(1) SEC approved Independent Inspection Agency (IIA)
Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated April 28, 2011G.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order as confirmed
through Electrotecnica Arteche letter # NIL dated January 11,
2010 G.
GE
United States
Yes
HAEFELY-TRENCH ELECTRIC
FRANCE
Yes
HAEFELY-TRENCH ELECTRIC
SWITZERLAND
Yes
Croatia/Hrvatska--
Yes
All Type, Special, Routine tests per SEC Standards and IEC to
be performed at KONCAR-Electrical Institute Inc. as
independent and accredited testing laboratory. Extended
guarantee/warrenty for 10 years.
MEMF
Saudi Arabia-RIYADH
Yes
NISSIN
JAPAN
Yes
SADTEM
FRANCE
Yes
SIEMENS
GERMANY
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Total =
36
.2
36. 2. 0
14
69 KV POTENTIAL TRANSFORMERS
69 KV POTENTIAL TRANSFORMERS
Applicable Standards:
ABB
SWEDEN
Yes
ABB ( T& D)
United States-N/A
Yes
BELGIUM
Yes
ALSTOM Grid
United States-Waynesboro
Yes
50-TMSS-03
AREVA
United Kingdom
Yes
E. PFIFFNER
SWITZERLAND
Yes
Electrotecnica Arteche
SPAIN-Mungia
Yes
HAEFELY-TRENCH ELECTRIC
FRANCE
Yes
HAEFELY-TRENCH ELECTRIC
SWITZERLAND
Yes
Croatia/Hrvatska--
Yes
NISSIN
JAPAN
Yes
All Type, Special, Routine tests per SEC Standards and IEC to
be performed at KONCAR-Electrical Institute Inc. as
independent and accredited testing laboratory. Extended
guarantee/warrenty for 10 years.
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Total =
36
.3
36. 3. 0
11
Applicable Standards:
ABB
SWEDEN
Yes
ABB ( T& D)
United States-N/A
Yes
BELGIUM
Yes
ALSTOM Grid
United States-Waynesboro
Yes
50-TMSS-02,50-TMSS-03
AREVA
United Kingdom
Yes
Electrotecnica Arteche
SPAIN-Mungia
Yes
HAEFELY-TRENCH ELECTRIC
FRANCE
Yes
HAEFELY-TRENCH ELECTRIC
SWITZERLAND
Yes
Croatia/Hrvatska--
Yes
NISSIN
JAPAN
Yes
All Type, Special, Routine tests per SEC Standards and IEC to
be performed at KONCAR-Electrical Institute Inc. as
independent and accredited testing laboratory. Extended
guarantee/warrenty for 10 years.
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
PFIFFNER Instrument Transformers Ltd
FACTORY LOCATION
SWITZERLAND-Hirschthal
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD letter # 11-01326-02-03032301 dated
04/12/2011, it is pre-qualified for Inductive Voltage
Transformers from 110kV up to 230kV as confirming to SEC
specification # 50-TMSS-03, Rev.0 with the following
conditions:
36
.4
36. 4. 0
11
Applicable Standards:
ABB
SWEDEN
Yes
ABB ( T& D)
United States-N/A
Yes
BELGIUM
Yes
ALSTOM Grid
United States-Waynesboro
Yes
50-TMSS-02,50-TMSS-03
AREVA
United Kingdom
Yes
HAEFELY-TRENCH ELECTRIC
FRANCE
Yes
HAEFELY-TRENCH ELECTRIC
SWITZERLAND
Yes
MESWANDLER
GERMANY
Yes
NISSIN
JAPAN
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
PFIFFNER Instrument Transformers Ltd
FACTORY LOCATION
SWITZERLAND-Hirschthal
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on TS&SD letter # 11-01326-02-03032301 dated
04/12/2011, it is pre-qualified for Inductive Voltage
Transformers from 110kV up to 230kV as confirming to SEC
specification # 50-TMSS-03, Rev.0 with the following
conditions:
36
.5
36. 5. 0
10
Applicable Standards:
ABB
SWEDEN
Yes
ABB ( T& D)
United States-N/A
Yes
BELGIUM
Yes
ALSTOM Grid
United States-Waynesboro
Yes
50-TMSS-02,50-TMSS-03
AREVA
United Kingdom
Yes
HAEFELY-TRENCH ELECTRIC
SWITZERLAND
Yes
HAEFELY-TRENCH ELECTRIC
FRANCE
Yes
NISSIN
JAPAN
Yes
Total =
SER
37
37
.1
37. 1. 1
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
INSULATING OIL
Applicable Standards:
54-TMSS-01
---
Yes
INDIA-RABLE-NEW MUMBAI
Yes
Saudi Arabia-YANBU
Yes
NYNAS
SWEDEN
Yes
Saudi Arabia-Jeddah
Yes
SAVITA
INDIA
Yes
SHELL
GERMANY-Hamburg
Yes
37
.2
37. 2. 0
Applicable Standards:
ATOFINA CHEMICALS
United States
Yes
United States
Yes
FURAKAWA CABLES
JAPAN-FUJIKURA
Yes
INDOPOL
FRANCE-LAVERA
Yes
SIEMENS
GERMANY
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Total =
39
39
.1
39. 1. 1
TELECOMMUNICATION EQUIPMENT
Applicable Standards:
Saudi Arabia-Riyadh
Yes
48-TMSS-06
Based on S&SD letter # 15-01367-01-30504401 dated 8th
March-2015, the manufacturer is prequalified for Integration
(Assembly) & Testing of Communication Equipment from Original
Equipment Manufacturer (OEM) type tested & approved by
SEC/National Grid SA as conforming to National Grid SA
specification # 48-TMSS-06, Rev.0 with the following condition:
Only for Integration (Assembly) & Testing of Communication
Equipment from Original Equipment Manufacturer (OEM) type
tested & approved by SEC/National Grid SA.
Ten (10) years extended warranty in respect of the defects
due to design, manufacturing and workmanship, as confirmed
by the manufacturer through their letter #
PSN/TLE/0517/09/2014,dt: 15/09/2014.
Saudi Arabia-Jeddah
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
SIEMENS
FACTORY LOCATION
Saudi Arabia-JEDDAH
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-08957-02-30504401 dated 17
December 2014, the manufacturer is prequalified for
Integration (Assembly) and Testing of Communication
Equipment from Original Equipment Manufacturer (OEM) type
tested and approved by National Grid SA as conforming to
National Grid SA specification # 48-TMSS-06, Rev.0 with the
following condition:
Ten (10) years extended warranty in respect of the
defects due to design, manufacturing, installation and
workmanship from the date of the Provisional Acceptance
Certificate (PAC) of the first turnkey project (in case of
contract award) and from the date of first delivery in case of
direct material supply order shall be provided as confirmed by
the manufacturer through their letter Fe/08/14 dated October
10, 2012.
Total =
39. 1. 2
Applicable Standards:
ABB
SWEDEN
Yes
ABB
SWITZERLAND
Yes
ALCATEL
FRANCE
Yes
48-TMSS-06
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Alcatel-Lucent-ShangHai Bell Alcatel Co.Ltd(ASB)
FACTORY LOCATION
CHINA-ShangHai
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 14-07395-30504401, dated
23/10/2014, the test facility of Alcatel Lucent in (Bydgoszcz,
Poland) is allowed to conduct Factory Routine test and
Integration testing of communication equipment manufactured
in Alcatel-Lucent Factory in Shanghai China confirming to
National Grid SA requirements.
Based on TS&SD letter #10-03519/03-03032301 dated
17/04/2011, it is pre-qualified for Fiber Optic Communication
Terminal type Optenix1660SM with the following conditions:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
United States
Yes
FINLAND-Helsinki
Yes
FUJITSU
JAPAN
Yes
GE Industrial System
CANADA-Ontario
Yes
CHINA-Shenzhen
Yes
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Loop Telecommunication International
FACTORY LOCATION
Taiwan-Hsinchu
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter# 14-08552-01-30504401 dated
December 12, 2014 and S&SD letter # 15-01248-01-30504401
dated February 19, 2015, it is pre-qualified for Access DCS-Mux
Type DXC (from Loop Family-AM3440) and Digital Cross
Connect Equipment type eDXC (from Loop family-O9500), as
conforming to National Grid SA specification # 48-TMSS-06,
Rev.0, with the following condition:
- Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of
first delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated March 15, 2013.
39. 1. 3
39
.2
39. 2. 0
JAPAN-TOKYO
Yes
NORTEL
CANADA
Yes
PHILIPS
HOLLAND
Yes
TELETTRA
FRANCE
Yes
Applicable Standards:
ABB INFOCOM LTD.
FRANCE-TURGI
Yes
LICOM
United States
Yes
PRISM
CANADA
Yes
SIEMENS
GERMANY
Yes
Total =
14
Total =
48-TMSS-06
DWDM SYSTEM
DWDM SYSTEM
Applicable Standards:
48-TMSS-08
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Alcatel Lucent
FACTORY LOCATION
ITALY-Trieste
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 15-0010-02-30504401 dated 12th
February 2015, the manufacturer is prequalified for DWDM
equipment Type 1830 PSS-32 as conforming to National Grid SA
specification # 48-TMSS-08, Rev.0 with the following condition:
Ten (10) years extended warranty in respect of the defects
due to design, manufacturing and workmanship from the date
of the Provisional Acceptance Certificate (PAC) of the first
turnkey project (in case of contract award) and from the date
of first delivery in case of direct material supply order shall be
provided as confirmed by the manufacturer through their letter
No. (Nil) dated 06th June 2014.
IPG Photonics
Yes
IPG Photonics
ITALY-Milan
Yes
39
.3
39. 3. 1
Applicable Standards:
48-TMSS-09
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
ABB Automation Co. Ltd
FACTORY LOCATION
Saudi Arabia-Riyadh
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 15-01367-01-30504401 dated 8th
March-2015, the manufacturer is prequalified for Integration
(Assembly) & Testing of Communication Equipment from Original
Equipment Manufacturer (OEM) type tested & approved by
SEC/National Grid SA as conforming to National Grid SA
specification # 48-TMSS-09, Rev.0 with the following condition:
Only for Integration (Assembly) & Testing of Communication
Equipment from Original Equipment Manufacturer (OEM) type
tested & approved by SEC/National Grid SA.
Ten (10) years extended warranty in respect of the defects
due to design, manufacturing and workmanship, as confirmed
by the manufacturer through their letter #
PSN/TLE/0517/09/2014,dt: 15/09/2014.
Saudi Arabia-Jeddah
Yes
39. 3. 2
SDH EQUIPENT/SYSTEM
Applicable Standards:
Coriant Gmbh
GERMANY-Berlin
Yes
48-TMSS-09
- Previously Nokia Solutions and Network BV (NSN)
- Approved for SDH equipment (hiT 7080, hiT 7070, hiT 7065,
hiT 7060, hiT 7035 and TNMS)
Total =
39
.6
39. 6. 0
Applicable Standards:
48-TMSS-12
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
Amwaj Telecommunication Manufacturing Co.
FACTORY LOCATION
Saudi Arabia-Riyadh
Pre-Qualified
Manufacturers
By SEC
Yes
REMARKS
Based on S&SD letter # 15-00581-02-30504401 dated April 21,
2015, it is pre-qualified for Telecommunication & Fiber Optic
Passive Products (Frame, Box, Rack, etc.) with the following
condition:
Seven (7) years extended warranty from the date of PAC of
the turnkey project in case of contract award or date of
delivery in case of direct material supply order. This was
confirmed by Amwaj Telecom MFG. Co. letter dated
09/06/2010.
39
.8
39. 8. 0
39
.9
39. 9. 1
39. 9. 2
Total =
Total =
Total =
DC POWER SYSTEMS
DC POWER SYSTEMS
Applicable Standards:
EXIDE CORP.
United States-PA
Yes
United Kingdom-ESSEX
Yes
United States-LOARIN
Yes
FRANCE
Yes
Previously SAFT-NIFE
TELEPHONE EXCHANGE
PAX (TELEPHONE EXCHANGE)
Applicable Standards:
ALCATEL
FRANCE
Yes
NORTEL
CANADA
Yes
SIEMENS
GERMANY
Yes
ERICSON
39. 9. 3
Total =
Applicable Standards:
SWEDEN
Yes
Applicable Standards:
MITEL CORP.
CANADA
Yes
SER
39. 9. 4
39. 9. 5
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
. 10
39. 10. 0
39
. 11
39. 11. 1
Pre-Qualified
Manufacturers
By SEC
REMARKS
Total =
Total =
Total =
Total =
Applicable Standards:
ALCATEL NV
FRANCE-PARIS
Yes
AT & T
Yes
NORTHERN TELECOM
CANADA
Yes
PHILIPS
HOLLAND
Yes
SIEMENS
GERMANY
Yes
CABLING ACCESSORIES
Applicable Standards:
RAYCHEM
39
FACTORY LOCATION
United States-CA
Yes
Applicable Standards:
ABB
SWEDEN
Yes
FRANCE-TURGI
Yes
AREVA
FRANCE
Yes
Yes
NERA
NORWAY
Yes
SIEMENS
GERMANY
Yes
TELE-PROTECTION SYSTEM
TELEPROTECTION SYSTEM
Applicable Standards:
ABB
SWEDEN
Yes
AREVA
FRANCE
Yes
SER
39. 11. 2
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
. 12
39. 12. 0
39
. 13
39. 13. 0
39
. 14
Pre-Qualified
Manufacturers
By SEC
DIMAT
SPAIN-Barcelona
Yes
SIEMENS
GERMANY
Yes
REMARKS
Based on TS&SD Letters# 09-01439-2-03032301 dated 7th July
2009 & 10-00845-1-03032301 dated April 04, 2010. It is prequalified for Tele-protection Equipment type TPU-1 with the
following conditions:
Five (5) years Extended Warranty.
Total =
Total =
Total =
Total =
Applicable Standards:
POSITRON INDUSTRIES
39
FACTORY LOCATION
CANADA-MONTREAL
Yes
VF INTERFACE EQUIPMENT
VF INTERFACE EQUIPMENT
Applicable Standards:
ABB INFOCOM LTD.
SWITZERLAND-TURGI
Yes
TELLABS INC.
United States-N/A
Yes
Applicable Standards:
ELECTRONIA
Saudi Arabia-AL-KHOBAR
Yes
GE/ERICSON
United States-N/A
Yes
GLENAYRE
CANADA- BC
Yes
KENWOOD
United States-CALIFORNIA
Yes
MOTOROLA
United States-SCHAMBURG IL
Yes
NEC
United States
Yes
NOKIA
FINLAND
Yes
PHILIPS
United Kingdom-CAMBRIDGE
Yes
TEST EQUIPMENT
SER
39. 14. 0
39
. 15
39. 15. 0
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
TEST EQUIPMENT
. 16
39. 16. 0
39
. 17
39. 17. 0
ACTERNA
United States
Yes
JAPAN-TOKYO
Yes
United States
Yes
IFR
United States-N/A
Yes
PHILIPS
United Kingdom-CAMBRIDGE
Yes
GERMANY-N/A
Yes
TREND
SPAIN
Yes
WEST GERMANY
Yes
. 18
REMARKS
Total =
Total =
Total =
Total =
Applicable Standards:
JAPAN-TOKYO
Yes
Applicable Standards:
BIRD
United States-SOLON
Yes
MARCONI
United Kingdom-N/A
Yes
NEC
39
Pre-Qualified
Manufacturers
By SEC
Applicable Standards:
ANRITSU CORPORATION
39
FACTORY LOCATION
Applicable Standards:
United States
Yes
SER
39. 18. 0
39
. 19
39. 19. 0
39
. 20
39. 20. 0
40
40
.1
40. 1. 1
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Applicable Standards:
ALLEN
Yes
ANDREW
United States- IL
Yes
Yes
CELWAVE
United States
Yes
DECIBEL
Yes
FLEXWELL
United States-N/A
Yes
JAYBEAM
Yes
United Kingdom-NORTHANTS
Yes
Total =
Total =
Total =
UHF RADIO
UHF RADIO
Applicable Standards:
ALCATEL
FRANCE
Yes
ASCOM
United Kingdom
Yes
SIMOCO
United Kingdom
Yes
Applicable Standards:
ABB
SWEDEN
Yes
NOKIA
FINLAND
Yes
NORTEL
CANADA
Yes
FM 200 SYSTEM
GAS CYLINDERS & ACCCESSORIES
Applicable Standards:
SER
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
DUEPOINT
United States
Yes
GREAT LAKES
United States
Yes
REMARKS
Total =
40. 1. 2
EQUIPMENT
Applicable Standards:
Yes
ANSUL
United States
Yes
CHEMETRON
United States
Yes
FENWAL
United States
Yes
FIGGIE
United States
Yes
FIKE
United States
Yes
FIREATER
United States
Yes
HYGOOD
United States
Yes
KIDDE
United States
Yes
Minimax
GERMANY-Bad Oldesloe
Yes
Yes
11
SER
40
.2
40. 2. 1
40
.3
40. 3. 1
40
.4
40. 4. 1
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Applicable Standards:
GRINNEL
United States
Yes
RELIABLE
United States
Yes
SPRAYSAFE
United States
Yes
VIKING
United States
Yes
WATTS
United States
Yes
Total =
Total =
Applicable Standards:
CARDOX
United States
Yes
CHEMETRON
United States
Yes
FIKE
United States
Yes
...
HYGOOD
United States
Yes
KIDDE
United States
Yes
Applicable Standards:
AURORA
United States
Yes
FAIRBANK MORSE
United States
Yes
FLOWAY
United States
Yes
ITT
United States
Yes
PEERLESS
United States
Yes
PETTERSON
United States
Yes
REDDY BUFFALOU
United States
Yes
WORTHINGTON
United States
Yes
SER
40
.5
40. 5. 1
40
.6
40. 6. 1
40. 6. 2
40. 6. 3
40. 6. 4
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Total =
Total =
Total =
Total =
Total =
Total =
FOAM SYSTEM
FOAM SYSTEM & ACCESSORIES
Applicable Standards:
ANGUS
United Kingdom
Yes
CHEMGUARD
United States
Yes
NATIONAL FOAM
United States
Yes
FIRE EXTINGUISHER
PORTABLE / MOBILE
Applicable Standards:
HEBA
Saudi Arabia
Yes
SFFECO
Saudi Arabia
Yes
Applicable Standards:
ANSUL
United States
Yes
KIDDE
United States
Yes
>=5 LBS
SENTRY
United States
Yes
Applicable Standards:
ANSUL
United States
Yes
SENTRY
United States
Yes
SENTRY
Applicable Standards:
United States
Yes
SER
40
.7
40. 7. 1
METERIAL / EQUIPMENT
DESCRIPTION
MANUFACTURER
FACTORY LOCATION
Pre-Qualified
Manufacturers
By SEC
REMARKS
Applicable Standards:
AUTOCALL (GRINNEL)
United States
Yes
EDWARDS
CANADA
Yes
MIRETONE
United States
Yes
NOTIFIRE
United States
Yes
Yes
SIMPLEX
United States
Yes
THORN
United Kingdom
Yes
Total =