Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Fe-500 +
(8mm to 32mm TMT Bars & 5.5mm Wire Rods)
www.adiispatlimited.com
EXECUTIVE SUMMARY
Wire Rods
INTRODUCTION
Adi Ispat Private Limited was incorporated on dated 26th July 2004 under the supervision of its Directors Mr. Ashok Kr.
Sarawgi, Mr. Amit kr. Sarawgi & Mr. Sumit Kr. Sarawgi. Adi Ispat Private Limited started its manufacturing unit with a
7MT Induction melting Furnace at its Regd. Works in Manjhiladih, Gadi Srirampur, Giridih, Jharkhand which started its
commercial Production on August 2007 with an annual capacity of 18oooMT. It is one of the leading industries which are
producing High Quality low carbon MS Ingots in this region. Adi Ispat Private Limited then expanded by adding its
Second Steel Melting Shop of same capacity and its annual production capacity of MS Ingot rounded off to 36000MT
from dated September 2009. Adi Ispat private is now in its Expansion Mode in Phased manner and in Phase II it has
commissioned its Hi-Speed, Automated, and Continuous Rolling Mill Project with an annual capacity of 96000MT and
started its commercial Production from February 2010.
ABOUT DIRECTORS
Mr. Ashok Kr. Sarawgi is very dynamic and knowledgeable vast experienced person having an experience of more than
36 years in Steel Industry. He started his career at the age of 23 Years with m/s P.K.Industries in 1978 which is the first
SSI Scrap Processing unit at Giridih. He was the Promoter Director of first mini Re-Rolling Mill M/s Bir Steel (P) Ltd., at
Giridih in the year 1985. He also promoted another modern Re-Rolling Mill with Induction Furnace in the year 1993
having capacity of 400TPD in the name and style of M/s Atibir Hitech (P) Ltd. in the Year 2000. After that he became a
Partner of M/s Trishul Hitech Industries situated in Burnihat, Meghalaya and he was the key personal for the R&D and all
the Engineering Processes of the Industry.
Mr. Amit Kr. Sarawgi started his career in the age of 22 years by joining his family business of manufacturing Ingots and
Rolled Products, being run under the name of Atibir Hitech Private Limited, situated at Giridih. Further, he was also one
of the Promoter Directors of Atibir Industries Co. Ltd., running a Sponge Iron Mfg. unit of 400TPD capacity. He was
instrumental in setting up and commissioning of the unit.
We have made our Mill fully Automated for ONE MAN CONTROL by using
Programmable Logic Controller (PLC) with SCADA (PC based User Interface. We
have worked on the following points of Automation.
i)
Recipe Management: In recipe management the mill operator has to
just click on the recipe we want to manufacture like if the operator has
a production plan of 100MT of 10mm, he has to just click on the 10mm
button and the PLC will decide and will start the respective machines
needed to mfg. the same.
ii)
Interlocking: In this function all the Motors, Pumps, Pinch Rolls, Shears,
etc are inter locked with each other. Example wise if we are
manufacturing 12mm TMT Rods and an error occurred like Motor failed
or Hydl. Pump failed or any other faults the PLC will automatically
bypass the respective stands in order to avoid accident and will shift
producing 16mm to continue the production process.
iii)
ONE MAN CONTROL: PLC & SCADA is used to minimize the usage of
men power and for the same using the PLC technology and SCADA
interface any person who has the basic knowledge of computer can
operate the complete Rolling Process.
PRODUCTS
We are manufacturing the following High Quality Products:
MS Ingots
TMT Bars (8mm to 32mm)
Coils (5.5mm & 8mm)
Wire Rods
STRENGTHS
1. Proximity to the main raw materials required for the Project viz. sponge iron as there are a number of Sponge
Iron manufacturing units in the region.
2. Cheap undisrupted power required for this unit is available from the Damodar Valley Corporation. At present
33KV but we are upgrading to 132KV line.
3. The site is having Railway as well as National Highway link.
4. Close Proximity to Haldia / Kolkata Port.
Hydraulic Ejector
18 Roughing Mill
Continuous Mill
Shearing Machines
DC & AC DRIVES
TMT BOX