Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
VINCI TECHNOLOGIES
CATALOGUE OF PRODUCTS
2015
EOR
Rock Mechanics
Coreholders
LIST OF INSTRUMENTS
21
22
23
24
25
26
27
28
29
30
31
32
33
COREHOLDERS __________________________________________ 38
HASSLER COREHOLDER (HAS SERIES) ____________________________________________
PRESSURE TAPPED HASSLER COREHOLDER
(PT-HAS SERIES) ___________________
HYDROSTATIC COREHOLDER (HYC SERIES) ________________________________________
PRESSURE TAPPED HYDROSTATIC COREHOLDER
(PT-HYC SERIES) __________________
TRIAXIAL COREHOLDER (TRC SERIES) ____________________________________________
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
3/81
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
4/81
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
5/81
Autoflood
Relative permeameter
Capri
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
6/81
FEATURES
Maximum confining pressure
Maximum pore pressure
Maximum nitrogen gas pressure
Maximum working temperature
Core diameter
Core length
Material
Power supply
Air Pressure requirements
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
7/81
FEATURES
Maximum confining pressure
Maximum pore pressure
Maximum working temperature
Core diameter
Core length
Flow rate
Material
Power supply
Air Pressure requirements
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
8/81
FEATURES
Maximum confining pressure
Maximum pore pressure
Maximum working temperature
Core diameter
Core length
X-ray source
Wetted parts
Core holder body
Power supply
Air Pressure requirements
BENEFITS
Vertical or horizontal orientation of the core sample
X-ray transparent core holder provided with homogeneous temperature control system
Single and dual energy x-ray scanning mode
Can be integrated into existing systems
X-ray proof cabinet
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
9/81
FEATURES
Maximum confining pressure
Maximum pore pressure
Maximum mud pressure
Maximum working temperature
Core diameter
Core length
Mud flow rate
Material
Power supply
Air Pressure requirements
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
10/81
The FES350 instrument allows for determination of permeability changes of a formation sample
as it is exposed to a variety of test fluids. Fluids can be injected through the core in either
direction or flowed across either end of the core face. The system is designed to handle all types
of clean treating, as well as corrosive treating fluids at temperatures up to 300 F (150 C). The
unique design offers a complete computer controlled automation package that allows precise
monitoring and control of the different flow paths. The computer controlled system is provided
with a unique software that allows for operation both manual and automatic modes where all
key components can be controlled including pump, valves and data acquisition. A test sequencer
also permits to program and run test sequences automatically.
FEATURES
Maximum confining pressure
Maximum pore pressure
Maximum working temperature
Core diameter
Core length
Flow rate
Pumped fluids
Displaced fluid
N of pressure taps
Wetted parts
Power supply
Air Pressure requirements
6,000 psi
5,000 psi
150C
1 and 1.5 other upon request
1 to 12 other upon request
up to 36 cc/min
4
1
up to 5 spaced 2 inches apart along the core (option)
Hastelloy, peek
220VAC, 50Hz
7 bar (100 psi)
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
11/81
The MAT 700 is designed to inject an acid solution into a rock sample at reservoir conditions to
dissolve some of the minerals present in the rock with the objective of improving the natural
permeability of the rock. The unit allows for constructing the acid response curve in terms of
pressure drop or permeability versus time or amount of injected acid. Efficiency of different
HCL-HF formulations to attack plugging minerals and effects of flow rate and temperature on
core sample permeability can also be studied.
FEATURES
Maximum confining pressure
Maximum pore pressure
Maximum working temperature
Core diameter
Core length
Position
Wetted parts
Power supply
Air Pressure requirements
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
12/81
The OMP 700 is designed to determine mercury capillary pressure of a core sample loaded into
a core holder at net overburden pressure and ambient temperature. The data produced (mercury
intrusion volume at various pressures) can be used to calculate numerous sample characteristics
such as pore size distributions, total pore volume,... The OMP 700 consists of a dual cylinder
pump, an overburden hydrostatic core holder, a vacuum pump and a data acquisition system.
One cylinder pump controls the overburden pressure while the second one injects mercury into
a core sample mounted into the hydrostatic core holder.
FEATURES
Maximum confining pressure
Mercury capillary pressure
10,000 psi
1.5 psi to 10,000 psi
142 m to 0.021 m
Core diameter
Core length
Wetted parts
Power supply
1"1/2
1 to 3
Stainless steel
110 - 220VAC, 50/60 Hz
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
13/81
The CAPRI system is dedicated to the determination of the capillary pressure curves (positive
and negative) and the electrical resistivity index as a function of core sample saturation at
reservoir conditions. Saturation exponent n, formation factor and cementation exponent m
are also calculated. The instrument consists of a core holder furnished with hydrophobic and
hydrophilic ceramics and electrodes pattern for resistivity measurement, an automated pumping
system for fluid control and a resistivity cell for brine resistivity measurement. The whole is
housed in a temperature controlled air bath.
FEATURES
Maximum confining pressure
Max pore pressure
Working temperature
Capillary pressure range
Core length
Core diameter
Power supply
Brine wetted material
BENEFITS
Measurement are made at reservoir conditions of pressure and temperature
Direct capillary pressure measurement
High temperature pump located in the controlled temperature air bath to reduce volume measurement
error induced by temperature fluctuations.
Multiple core samples configuration available
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
14/81
FEATURES
Oil-water drainage:
Oil-water imbibition:
Air-water drainage:
Air-water imbibition:
Speed regulation
Speed step overshoot
Acceleration
Speed ramp
Temperature
Speed
Large radius
Power supply
BENEFITS
Fast capillary pressure run (1 to 2 days)
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
15/81
FEATURES
Operating pressure
Operating temperature
Core sample diameter
Core sample length
Fluid flow rate
Wetted part
Air requirement
Power supply
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
16/81
The spontaneous imbibition Amott test consists of placing an oil saturated core sample in an
Amott cell which is filled up with brine for a period of time. The oil expelled from the core
spontaneously can be measured accurately by reading the graduation on top of the cell.
Inversely, the spontaneous drainage Amott test consists of immersing a brine saturated core
sample into an Amott cell which is filled up with oil. The brine expelled from the core
spontaneously can also be determined by reading the graduation on the bottom of the cell. The
Amott cell includes a sealed glass cell for the core sample and a graduation tube to measure the
volume of fluid expelled from the core. The imbibition Amott cell stands by itself on a table
while the drainage Amott cell is maintained using a dedicated stand. Optional high temperature
Amott cells are also available.
FEATURES
MODEL: 1 (AMBIENT TEMPERATURE)
Temperature:
Pressure:
Core diameter:
Core length:
Graduated tube:
Ambient
Atmospheric
up to 2
up to 3
20cc
Ambient to 120C
up to 30 psi
up to 2
up to 3
20cc
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
17/81
AUTOMATIC IMBIBIOMETER
The imbibiometer is an automated computer controlled system capable of performing
spontaneous imbibition of oil and water into up to ten rock samples. Fluid production data
collected during this measurement is used to determine the volume of oil and water expelled
from the rock sample during respective imbibition and drainage tests. Ten Amott cells with
saturated samples inside are placed on a fixed stand and a movable video camera mounted on a
linear actuator allows for the automatic reading of the produced fluids in each of the ten
graduated burettes of the Amott cells. The water / oil interface height in each burette is recorded
in the computer at a selectable time interval. The video software automatically determines the
water/oil interface height and calculates the fluid produced during the test. Video retrieval
facilities allow for visualizing the spontaneous imbibibition experiments in an accelerated
mode. The imbibiometer can also be configured with a controlled temperature air bath when
imbibition tests have to be conducted at high temperature.
FEATURES
Temperature:
Number of core samples:
Burette volume:
Fluid volume accuracy:
Measurement resolution:
CDD color camera:
Lighting:
Power:
ambient
10
20 cc (other upon request)
0.05 cc
0.02 mm
5 megapixels
20 watts
110-220 VAC, 50 or 60 Hz
BENEFITS
Easy to operate
Improve accuracy of the reading thanks to a high accuracy camera
Save operators time which does no longer need to manually record the readings.
Allow for imbibition test retrieval in an accelerated mode.
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
18/81
FEATURES
Operating pressure
Operating temperature
Sample cell volume
Reference cell volume
Fluid flow rate
Wetted part
Test gas supply
Helium gas supply
Air requirement
Power supply
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
19/81
Core flood
Steam flood
Slim tube
IFT 700
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
20/81
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
21/81
The BCF 700 is a low cost solution to provide versatile facilities to carry out core flood and
fluid flow tests studies at reservoir conditions of temperature and pressure. The core flood tests
allow for the evaluation of various secondary and tertiary EOR tests, including waterflooding,
polymer injection, ASP injection, miscible and immiscible gas flooding and microbial flooding.
Relative permeability at Swi and Sor, displacement efficiency and incremental oil recovery after
implementing the EOR process can be determined. A number of modules can be used along
with the standard configuration including dual monitoring taps, gas injection line, automatic
fraction collector and airbath.
FEATURES
Maximum pore pressure
Maximum confining pressure
Maximum working temperature
Core diameter
Core length
Pressure taps
Position
Wetted parts
Power supply
Air Pressure requirements
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
22/81
FEATURES
Maximum pore pressure
Maximum working temperature
Tube diameter
Tube length
Pressure taps
Position
Wetted parts
Power supply
Air Pressure requirements
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
23/81
FEATURES
Maximum confining pressure
Maximum pore pressure
Maximum working temperature
Core diameter
Core length
Pressure taps
Position
Wetted part
Power supply
Air Pressure requirements
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
24/81
FEATURES
Maximum working pressure
Maximum working temperature
Visual foam cell
Sight glass view
Wetted parts
Power supply
Air Pressure requirements
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
25/81
The pressurized foam rheometer Rheo F400 is a fully automated pipe rheometer designed
specifically to measure the rheological properties of foamed fluids under pressure and temperature
conditions over a wide range of foam qualities, shear rates and shear stresses. The system
incorporates three high pressure high temperature syringe pumps for injection of the base fluids
and collection of the foamed fluid. Pressure transducers are provided to cover a wide range of shear
stress measurements. Flow rate and shear rate of the foamed fluids are measured using a Coriolis
mass flow meter. The shear loop is contained within an air bath enabling uniform temperature
control of all components within the loop. An integrated high-pressure capillary sight glass cell
allows visual determination of the foamed fluid while a video system captures pictures of the foam
through the view cell. The software is designed to allow the operator control over foam quality,
shear rate, shear stress, time length of tests and operating temperature.
FEATURES
Pressure range
Working temperature
Shear rate
Shear stress
Wetted parts
Power supply
Air Pressure requirements
6,000 psi
150C (300 F)
50 - 1,000 s-1
2 - 5,000 Dyne/cm2
Stainless steel
220VAC, 50Hz
100 psi
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
26/81
FEATURES
Maximum confining pressure
Maximum pore pressure
Maximum working temperature
Core diameter
Core length
Pressure taps
Wetted parts
Position
Power supply
Air Pressure requirements
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
27/81
FEATURES
Confining pressure
Steam pressure
Pore pressure
Maximum working temperature
Maximum steam temperature
Core diameter
Core length
Wetted parts
Power supply
Air Pressure requirements
10,000 psi
up to 2,500 psi
10,000 psi
150C
325C
1.5 (other upon request)
1to 6 (other upon request)
Hastelloy
220VAC, 50Hz
7 bar (100 psi)
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
28/81
FEATURES
Maximum confining pressure
Maximum pore pressure
Maximum working temperature
Core diameter
Core length
Position
Wetted parts
Power supply
Air Pressure requirements
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
29/81
FEATURES
Maximum confining pressure
Maximum pore pressure
Maximum working temperature
Core diameter
Core length
Wetted parts
Position
Power supply
Air Pressure requirements
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
30/81
The slim tube system is used to obtain, dynamic miscibility information at reservoir conditions.
The gas to be tested is injected at a desired pressure through the slim tube previously cleaned
and saturated in oil by means of a high pressure pump. A back pressure regulator maintains a
constant pressure inside the system. The effluents flowing from the slim tube can be observed
through a capillary sight glass tube. They are then expanded to atmospheric pressure and
temperature through a back pressure regulator. The volume of liquid effluents is then monitored
continuously using a digital volume measuring detector while the produced gas is measured by
a wet gas meter. The recovery curve is then plotted using the raw data obtained during the
different miscible displacement experiments. Additional components such as density meter and
gas chromatograph may be added to extend the capabilities of the instrument.
FEATURES
Tube length:
Tube external diameter:
Material:
Porous media:
Approx porosity:
Approx pore volume:
Working pressure:
Working temperature:
Fluids:
Power supply:
BENEFITS
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
31/81
FEATURES
Working pressure:
Working Temperature:
Sightglass viewing area:
Internal section:
Needle tip diameter:
Material:
Fluids:
Electrical requirements:
BENEFITS
Fast results
Visible results
Less expensive that slim tube method
Minimal fluid sample required
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
32/81
The apparatus allows for the determination at reservoir conditions of interfacial tension between
liquid-gas and liquid-liquid interfaces using pendent drop method as well as the contact angle
between liquid and solid interfaces using sessile drop method. A liquid drop is created and put
in contact with gas or solid in a cell at reservoir conditions. A camera connected to a computer
records the shape of the liquid drop to derive the interfacial and contact angle properties. The
Drop Analysis System software allows the fast calculation of surface and interfacial tension of
pendent drop and contact angles of sessile drops.
FEATURES
IFT standard measurement:
Temperature:
Temperature accuracy:
Pressure:
Wetted parts:
Power supply:
0.1 to 72 mN/m
Ambient to 180C
0.1C
700 bar (10,000psi)
Stainless steel, option: Hastelloy
220 VAC 50 Hz
BENEFITS
Easy to use
Provided with an advanced drop analysis software
Very good stability of the drop
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
33/81
ROCK MECHANICS
Acoustic velocity
Rock compressibility
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
34/81
The RCS 700 apparatus is designed to monitor pore and bulk volume changes under various
levels of radial and axial confining pressures at reservoir temperature. The apparatus consists of
a triaxial core holder located in a constant temperature air bath to restore the reservoir
conditions on the core sample. The pump cylinder is used to generate and control the pore
pressure while the other two pump cylinders are used to generate the axial and radial confining
pressures. The volume variations of fluid injected into or expelled from the core sample can be
monitored with an extreme accuracy. Automated tests can be programmed to perform a number
of measurements at different steps of pressure and temperature without users intervention.
FEATURES
Core Diameter
Core Length
Max pore pressure
Max axial / radial confining pressure
Stroke volume of pump
Working temperature
Volume measurement accuracy
Pressure measurement accuracy
Material
Power supply
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
35/81
The AVS A allows for the measurement of acoustic velocity of a core sample at atmospheric
pressure and ambient temperature. It is used to propagate compressional and shear waves
through core samples, calculate acoustic velocity and determine dynamic elastic constants such
as the dynamic moduli, Youngs, bulk and shear, along with Poissons ratio. The system
consists of an atmospheric coreholder, acoustic transducer assemblies, acoustic Pulser / receiver
and digital oscilloscope.
FEATURES
Operating pressure
Operating temperature
Core sample diameter
Core sample length
Center frequency
Mode
Power supply
Atmospheric
up to 50C
1 and 1.5 other upon request
1 to 3 other upon request
500 KHz
compressional (P) and shear (S1 & S2)
110-220 VAC, 50 or 60 Hz
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
36/81
The AVS 700 allows for the measurement of acoustic velocity of a core sample under a wide
range of pore and confining pressures. It is used to propagate compressional and shear waves
through core samples, measure pore pressure, confining pressure and temperature, calculate
acoustic velocity and determine dynamic elastic constants such as the dynamic moduli,
Youngs, bulk and shear, along with Poissons ratio. The system consists of fully equipped
pressure vessel, acoustic transducer assemblies, confining pressure controller, pore pressure
controller, acoustic Pulser / receiver and digital oscilloscope.
FEATURES
Operating pressure
Operating temperature
Core sample diameter
Core sample length
Center frequency
Mode
Power supply
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
37/81
COREHOLDERS
Hassler CH
Triaxial CH
Leakoff CH
Stands
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
38/81
FEATURES
Performance specifications
Operating pressure rating:
Operating temperature:
Fitting:
Core diameter:
Core length:
Wetted parts:
Sleeve material
Inlet port:
Outlet port:
Pressure tap :
HAC series
5,000 psi (Max)
Ambient or 150C
NPT, Autoclave or HIP
Customer specified
Customer specified
Stainless steel, Hastelloy, titanium
Viton
As request
As request
As requested
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
39/81
FEATURES
Performance specifications
Operating pressure rating:
Operating temperature:
Fitting:
Core diameter:
Core length:
Pressure tap :
Wetted parts:
Sleeve material
Inlet port:
Outlet port:
PT-HAC series
5,000 psi (Max)
Ambient or 150C
NPT, Autoclave or HIP
Customer specified
Customer specified
Customer specified
Stainless steel, Hastelloy
Viton
As request
As request
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
40/81
FEATURES
Performance specifications
Operating pressure rating:
Operating temperature:
Fitting:
Core diameter:
Core length:
Wetted parts:
Sleeve material :
Inlet port:
Outlet port:
Pressure tap :
HYC series
5,000, 10,000 psi, 15,000 psi
Up to 150C
NPT, Autoclave or HIP
Customer specified
Customer specified
Stainless steel, Hastelloy, titanium
Viton
As request
one
As request
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
41/81
FEATURES
Performance specifications
Operating pressure rating:
Operating temperature:
Fitting:
Core diameter:
Core length:
Pressure tap :
Wetted parts:
Sleeve material :
Inlet port:
Outlet port:
PT-HYC series
5,000, 10,000 psi, 15,000 psi
Up to 150C
NPT, Autoclave or HIP
Customer specified
Customer specified
Customer specified
Stainless steel, Hastelloy
Viton
As request
one
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
42/81
The TRC Series core holders are standard triaxial type core holders in which radial and axial
loading are independent. These core holders are routinely used for fluid flow experiments. A
unique feature of the TRC series core holder is that the sleeve remains in place and the core is
loaded from one end without having to drain or refill the confining fluid. Independent axial
pressure is applied via a floating distribution plug. An inlet and outlet distribution plug allows
fluids and gases to be injected through the core sample. A unique feature of the TRC Series core
holder is that the holder does not need to be completely disassembled to remove the core
sample. By releasing the confining radial and axial pressure and unscrewing the eng plug, the
core sample can be easily removed without exposing it to the annulus fluid. The coreholder can
be configured for hassler loading, hydrostatic loading or triaxial loading.
FEATURES
Performance specifications
Operating pressure rating:
Operating temperature:
Fitting:
Core diameter:
Core length:
Pressure taps:
Wetted parts:
Sleeve material :
Inlet port:
Outlet port:
TRC series
5,000, 10,000 psi, 15,000 psi
Up to 150C
NPT, Autoclave or HIP
Customer specified
Customer specified
Customer specified
Stainless steel, Hastelloy, titanium
Viton
As request
As request
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
43/81
FEATURES
Performance specifications
Operating pressure rating:
Operating temperature:
Fitting:
Core diameter:
Core length:
Wetted parts:
Sleeve material :
Inlet port:
Outlet port:
PT-TRC series
5,000, 10,000 psi, 15,000 psi
Up to 150C
NPT, Autoclave or HIP
Customer specified
Customer specified
Stainless steel, Hastelloy, titanium
Viton
As request
As request
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
44/81
The LEC Series core holders are mainly used for static and dynamic filtration tests so as to
study erosion effects induced by the fluid flowing across the core face which contains proppant
and other particulates. The coreholder features a special head that allows the upper face of the
core sample to be exposed to invasion fluids. The fluids can be injected from both ends of the
core holder then simulating the wellbore and the reservoir side.
FEATURES
Performance specifications
Confining pressure:
Pore pressure:
Mud pressure:
Operating temperature:
Fitting:
Core diameter:
Core length:
Wetted parts:
Sleeve material :
Inlet port:
Outlet port:
LEC series
Up to 10,000 psi
Up to 5,000 psi
Up to 5,000 psi
Up to 150C
NPT
Customer specified
Customer specified
Hastelloy
Viton
As request
As request
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
45/81
The PT-LEC Series core holders are mainly used for static and dynamic filtration tests so as to
study erosion effects induced by the fluid flowing across the core face which contains proppant
and other particulates. They are equipped with a number of pressure taps molded in the sleeve at
discrete locations required by the end user. This design allow to monitor the pressure drop along
the length of the core sample during fluid flow tests. The coreholder features a special head that
allows the upper face of the core sample to be exposed to invasion fluids. The fluids can be
injected from both ends of the core holder then simulating the wellbore and the reservoir side.
FEATURES
Performance specifications
Confining pressure:
Pore pressure:
Mud pressure:
Operating temperature:
Fitting:
Core diameter:
Core length:
Wetted parts:
Sleeve material :
Inlet port:
Outlet port:
Pressure taps :
PT-LEC series
Up to 10,000 psi
Up to 5,000 psi
Up to 5,000 psi
Up to 150C
NPT
Customer specified
Customer specified
Hastelloy
Viton
As request
As request
As request
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
46/81
The QRC Series core holders allows for the core to be loaded without the complete disassembly
of the coreholder. The core loading is achieved using an innovative turn fast release bayonet
mechanism. The coreholder is configured for hassler loading. The sleeve remains in place and
the core is loaded from one end without having to drain/refill the confining fluid which can be
nitrogen or hydraulic oil. This avoids damage to the sleeve which can occur with assembly and
disassembly. Operation is much easier and quicker and leads to higher throughput when tests of
short duration are being carried out.
FEATURES
Performance specifications
Operating pressure rating:
Operating temperature:
Fitting:
Core diameter:
Core length:
Wetted parts:
Sleeve material
Inlet port:
Outlet port:
QRC series
400 psi, 1000 psi or 5000 psi
Ambient or up to 80C
NPT
Customer specified
Customer specified
Stainless steel
Nitrile
1
1
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
47/81
FEATURES
Performance specifications
Operating pressure rating:
Operating temperature:
Center frequency
Fitting:
Core diameter:
Core length:
Wetted parts:
Sleeve material
Inlet port:
Outlet port:
AVC series
10,000 psi, 15,000 psi
Ambient or 150C
500 KHz
NPT, Autoclave or HIP
Customer specified
Customer specified
Stainless steel
Viton
1
1
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
48/81
The TXC Series core holders are standard hydrostatic type core holders. These core holders are
used for gas and liquid permeability testing with in situ saturation monitoring. The core holder
uses titanium body which is made from titanium to avoid important loss of X-ray. Spiral fluid
distribution grooves on core inlet are incorporated to minimise capillary end effects. The
coreholder can be provided with an heating system which heats the confining fluid through the
annular confining chamber for optimal temperature homogeneity.
FEATURES
Performance specifications
Operating pressure rating:
Operating temperature:
Fitting:
Core diameter:
Core length:
Wetted parts:
Body material:
Sleeve material :
Inlet port:
Outlet port:
TXC series
10,000 psi, 15,000 psi
Up to 150C
1/8LP
Customer specified
Customer specified
Stainless steel, Hastelloy, titanium
Titanium
Viton
As request
one
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
49/81
The NMR Series core holders are hydrostatic type core holders in which radial and axial
confining pressures are common. These core holders are used for MRI imaging. The coreholder
includes a composite body in which a PEEK liner has been inserted. Two floating pistons
maintain the sleeve in place. For variable length cores, this design insures solid contact between
the platen and core sample. To change a core sample the confining fluid must be drained off.
After removal of the two platens from the sleeve the core can be withdrawn. Loading a new
core sample is carried out in the reverse order. An optional heating recirculation pump is also
available for this series.
FEATURES
Performance specifications
Operating pressure rating:
Operating temperature:
Max outer tube diameter :
Max tube length :
Fitting:
Core diameter:
Core length:
Wetted parts:
Body material:
Liner:
Sleeve material :
Loading
Inlet port:
Outlet port:
NMR series
5,000 psi
Up to 150C
75 mm (other upon request)
600 mm
1/4
1.5(other upon request)
4 (other upon request)
PEEK and stainless steel
Glass Fiber
PEEK
Viton
Hydrostatic
one
one
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
50/81
The ECP Series core holders are standard hydrostatic type core holders. These core holders are
routinely used for electrical resistivity and capillary pressure at reservoir conditions. The
coreholders feature both water wet and oil wet porous ceramics placed between the flow
distribution plugs and the core sample. Two electrodes have been molded directly into the
sleeves and are used to measure the resistivity of the sample. They are provided with metal ring
placed into the sleeve along the core length at one inch spacing between the rings. The other
two electrodes are in contact with the distribution plugs which are electrically isolated from the
rest of the coreholder.
FEATURES
Performance specifications
Operating pressure rating:
Operating temperature:
Resistivity measurement
Capillary pressure
Connection
Core diameter:
Core length:
Wetted parts:
Sleeve material
Inlet port:
Outlet port:
ECP series
10,000 psi,
Ambient and up to 150C
2 and 4 points
Positive and negative
NPT
Customer specified
Customer specified
Stainless steel
Viton
2
1
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
51/81
The electrical heating system can be provided to heat and maintain homogeneous temperature in
the core sample. The heating jacket fits the shape of the coreholder in order to provide the
highest heat efficiency. A digital temperature controller is used to enter, display and regulate
the temperature . A thermocouple probe is used to measure the temperature of the coreholder
body.
FEATURES
Performance specifications
Operating temperature:
Temperature accuracy:
Power:
HES series
Ambient to 150C
0.1 C
220 VAC, 50 Hz,
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
52/81
A number of stands are available depending on the End users requirement. Simple to most
complicated designs can be proposed. The stand can be mounted inside or outside of the airbath.
The stand can also be configured in a bench top or bench floor version.
FEATURES
Performance specifications
STA series
Coreholder position:
Fixed Horizontal,
Fixed horizontal and vertical,
Swivelling
Operating temperature:
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
53/81
Video tracker
BPR
Vacuum Pump
Pressure Generator
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
54/81
FEATURES
Temperature
Collector capacity
Volume accuracy
Wetted parts
Power
ambient
100 ml or 300 ml
0.1 ml
glass
110-220 VAC, 50 or 60 Hz
BENEFITS
-
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
55/81
FEATURES
Max pressure
Max temperature
Max volume change..
Volume accuracy...
Material.
Measurement resolution..
Minimum field of view.
CDD colour camera..
Lighting ...
Power...
Atmospheric pressure
up to 40 C
50 ml
0.01 ml
Glassware
0.02 mm
50 mm
5 megapixels (2592 X 1944)
20 watts
110-220 VAC, 50 or 60 Hz
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
56/81
FEATURES
Max pressure
Max temperature
Max volume change..
Volume accuracy...
Material.
Measurement resolution..
Minimum field of view.
CDD colour camera..
Lighting ...
Power...
Atmospheric pressure
up to 40 C
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
57/81
FEATURES
Max pressure
Max temperature
Max volume change..
Volume accuracy...
Material.
Measurement resolution..
Field of view...
CDD colour camera..
Lighting ...
Power...
10,000 psi
150 C
100 ml, option: 300 ml
0.01 ml
Sapphire, Stainless steel, option: Titanium
0.01 mm
100 mm
5 megapixels
25 watts
110-220 VAC, 50 or, 60 Hz
BENEFITS
* Self calibrated
* Dual bore design which improves the accuracy by reducing effects of emulsions
* Possibility to retrieve the experiments versus to eliminate uncertainties of the measurements
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
58/81
FEATURES
Max pressure 10,000 psi
Max temperature 150 C
Phase volume change. 100 ml
Phase volume accuracy
0.01 ml
Material.
Sapphire, Stainless steel, option: Titanium
Field of view.
100 mm
CDD colour camera.. 5 megapixels
Lighting ...
25 watts
Power...
110-220 VAC, 50 or 60 Hz
BENEFITS
* The separator is a compact tool which can be easily installed into core flooding air baths.
* The full visibility of the produced phases enables the end user to simultaneously get the phase volume
changes and the real time pictures of the water/oil and oil/gas interface heights. Cross checking between
the actual images and calculated data is then possible.
* The use of three high resolution cameras to monitor a total height of 10 cm of produced fluids allows for
very accurate measurement of the interfaces and thus the volume changes.
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
59/81
FRACTION COLLECTOR
The fraction collector is used for collecting individual liquid sample fractions automatically
on a time or volume basis. It comes with a set of glass graduated tubes. The instrument
includes a front panel to program the collection sequences and can be computer controlled.
FEATURES
Model
Collection basis
Capacity
Tube dimensions
Drop former
Construction
Waste outlet tube
Operating temperature
Dimensions
Weight
Safety
Electrical
Silicone rubber
Case and carousel, polypropylene;
Front panel, hard-coated polycarbonate
Polyurethane
to 40C
24 x 33 x 25 cm (W x D x H)
5 Kg
Meets IEC 61010 and CSA 22.2 certification
110-220 VAC, 50/ 60 Hz
BENEFITS
Time or drop collection modes
Collection of 1 drop (~50 l) to 9 ml fractions in 80 test tubes
Manual-advance tube changes
Small footprint of 24 x 33 cm
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
60/81
FEATURES
Flow rate
Max temperature
Wetted part
Weight
Port connection
0.01 to 25 cc/min
up to 150C
Stainless steel or Hastelloy
0.5 Kg
1/8
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
61/81
Designed to measure the volume of gas produced during a process at ambient conditions such as
gas-liquid relative permeability. The meter is complete with thermometer, spirit level, levelling
feet and gas connections. An option computer interface is available to acquire and display the
gas volume versus time.
FEATURES
Temperature
Pressure
Capacity
Scale
Maximum pressure
Flow range
Maximum capacity
Ambient
Atmospheric
25 dm3 (i.e. 0.25 litres) per revolution
0.001 dm3
65 mbar
30 to 90 litres per hour +/- 0.5%
99,999 litres
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
62/81
The capillary sight glass tube provides a means to visually confirm miscibility of displaced
fluids during dynamic processes such as slim tube miscibility experiments and core
displacement test. The cell is made with a glass capillary tube embraced with two flanges at its
ends.
FEATURES
MODEL 1: CSGT-10KPSI-SS
Max pressure
Temperature
Wetted parts
10,000 psi
up to 150C
Stainless steel, sapphire
MODEL 2: CSGT-20KPSI-SS
Max pressure
Temperature
Wetted parts
20,000 psi
up to 150C
Stainless steel, sapphire
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
63/81
Vinci offers back pressure regulators designed to regulate the pressure in fluid flow studies. The
BPR consists of two chambers separated by a piston with a needle connected to it on the lower
side. The upper chamber receives the gas dome pressure and the lower chamber the process
pressure. The BPR acts a comparator. When the dome pressure is higher than the process
pressure the needle seals off the pressure and maintains the pressure. Inversely when the process
pressure exceeds the dome pressure the needle opens up and the excess process fluid flows out.
That way, on continuous flow these 2 stages are looped continuously and the process pressure is
balanced to the dome controlled constant value.
FEATURES
Maximum pressure
Flow rate
Max Temperature
Wetted part material
Port connection
10,000 psi
0.01 to 25 cc/min
150C
stainless steel, option : Hastelloy
1/8
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
64/81
The NV series needle valves are designed for liquid and gas flow control. They are available in
a variety of body styles, stems and seal materials. The models proposed are those, which are
commonly used with Vincis instruments.
FEATURES
Wetted part material
Wetted part material
Flow path
Valve configuration
Valve configuration
Valve configuration
Valve configuration
Maximum pressure
Maximum temperature
Orifice
Port connection
Stem type
Stem type
Seal material
Seal connection
(1)
BENEFITS
Available in up to five flow path patterns.
Non-rotating stem prevents stem/seat galling.
Engineered and designed packing for reliable sealing.
Metal-to-metal seating for longer seat life and excellent corrosion resistance.
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
65/81
The QC series quick connectors are specially designed for connecting high-pressure systems
together in a quick manner without any special tools. They consists of both female and male
couplers assembled together with a Viton sealing. Three models are available with different
material and connection ports.
FEATURES
Wetted part material
Wetted part material
Connector type
Valve configuration
Valve configuration
Maximum pressure
Maximum temperature
Orifice
Port connection
Port connection
Seal Material
BENEFITS
Available in up to three types
Engineered and designed sealing for reliable sealing.
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
66/81
The EI 700 is designed to electrically isolate one side of a core holder from the other when
placed in a non-conductive fluid stream. It can be used for reservoir condition electrical
properties during a relative permeability or a capillary pressure displacement test.
FEATURES
Maximum pressure: 10,000 psi
Max Temperature: 150C
Internal volume: less than 1 cc
Wetted part material: stainless steel, peek
Port connection: 1/8
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
67/81
The ACP 700 is designed to generate and maintain automatically a constant confining pressure
requested during core studies. It can also be used to maintain a constant differential pressure
between the pore pressure and confining pressure. The system consists of a positive
displacement pump of 250 cc capacity and 10,000 psi pressure, an automatic dual valve, a fluid
reservoir and two pressure transducers for pore and confining pressure control.
FEATURES
Confining pressure
Pore pressure
Pump cylinder capacity
Air requirement
Tubing connector
Power
Wetted parts
up to 10,000 psi
up to 10,000 psi
250 cc
100 psi
1/8
110-220 VAC, 50 or 60 Hz
Stainless steel
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
68/81
The floating piston accumulators are available in a range of different volume and pressure
rating. These can be constructed in different material such as stainless steel, titanium or
hastelloy. The fluid seals use standard Viton O rings and back up ring.
FEATURES
Pressure
Temperature
Cell volume
Material
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
69/81
The line of rodded floating piston accumulators is available in a range of different volume up to
1 liter and pressure rating. These models can be constructed in different material such as
stainless steel, titanium or hastelloy. The fluid seals use standard Viton O rings and back up
ring. A rod is attached to the piston for relative volume monitoring.
FEATURES
Pressure
Temperature
Cell volume
Material
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
70/81
The DVM series are designed to be mounted on the FPA series accumulators to monitor the
sample volume in the accumulator in real time. A rod is attached to the piston and slides into a
chamber equipped with a linear position transducer. The piston location, and hence the total
sample volume in the accumulator can be measured very accurately. The function is particularly
useful during core flooding tests as it enables the end-user to perform the experiment with
sufficient sample without be worried about the sample volume remaining in the accumulator.
FEATURES
Displaced volume measurement
500 ml (+/- 2 ml accuracy) Model DVM 500
Volume accuracy
1,000 ml (+/- 2 ml accuracy) Model DVM 1000
Volume accuracy
2,000 ml (+/- 5 ml accuracy) Model DVM 2000
Volume accuracy
5,000 ml (+/- 10 ml accuracy) Model DVM 5000
Pressure
Temperature
Power supply
up to 15,000 psi
Ambient to 150C (300 F)
110-220 VAC, 50/60 Hz
BENEFITS
Add-on device of the FPA series accumulators. Fits any size of FPA accumulators.
Provided with a digital volume display which can be hooked up to a computer for sample
recording versus time.
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
71/81
The MC series are double end piston type cylinders designed to store and mix any kind of fluids
at pressure and temperature. The sample fluid is isolated from the secondary driving fluid with a
floating piston and a magnetic mixer is located in the mixing sample chamber for proper
agitation. The mixer is magnetically coupled to a drive system through the accumulator end cap
which incorporates a permanent magnet driven by a direct current motor with variable speed. A
mixer controller permits to stop, start and control the speed of the mixer. The cylinder can be
operated in either upright or inverted orientation. Both end caps are provided with an inlet/outlet
port for fluid introduction or fluid sampling.
FEATURES
Model
MC 500-10
MC 1000-10
MC 2000-10
MC 500-15
MC 1000-15
MC 2000-15
(1)
Volume
ml
500
1,000
2,000
500
1,000
2,000
Pressure
psi
10,000
10,000
10,000
15,000
15,000
15,000
Temp.
C
150
150
150
150
150
150
Weight
Kg
19
21
35
24
26
41
Length
mm
460
610
620
460
610
620
Diameter
mm
120
120
150
135
135
165
Material
(1)
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Thread
connection
1/8 FLP
1/8 FLP
1/8 FLP
1/8 FLP
1/8 FLP
1/8 FLP
Mixer controller
Power requirement 110-220 VAC, 50 or 60 Hz
BENEFITS
H2S resistant
The impeller provides a minimum dead volume
Provide rigorous agitation of entire fluid sample
Capable of mixing high viscosity samples up to 1,000 cp
High speed, allows equilibrium to be reached in minimum time
Reduces operating time for establishing phase equilibrium on sample.
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
72/81
The fluid transfer vessels uses a glass tube embraced in two end plugs which are held in place
with two aluminium tie bars. The glass tube is protected by an external polycarbonate tube in
case of failure of the glass. The top end plug can be removed easily to load the fluid in the
vessel. The fluid is transferred from the vessel to another accumulator by applying air pressure
on the top port while the fluid passes through the bottom port of the vessel.
FEATURES
Pressure
Volume
Material
Fluids
100 psi
1,500 cc (other upon request)
Glass
brine, oil, mud, drilling fluid, etc
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
73/81
The HI series are dual cavity cylinders equipped with a low pressure (LP) bore at one end and a
high pressure (HP) bore at the other end. The pistons in each cylinder bore are connected by a
solid rod. When pressurized fluid enters the larger bore, the fluid in the smaller bore is
compressed to a pressure multiplied by the ratio of areas on the two pistons. Consequently,
pressures up to 150Kpsi can be achieved by using a commercially available lower pressure (10
Kpsi) pump. Material of construction is either stainless steel or titanium.
FEATURES
Model
Ratio
HP end
LP end
HI 2
2 :1
Volume
ml
50
Pressure
psi
20,000
ID
mm
25.46
Stroke
mm
98.24
Pressure
psi
10,000
ID
mm
36
HI 4
4 :1
25
40,000
18.00
98.24
10,000
36
HI 6
HI 8
6 :1
8 :1
20
15
60,000
80,000
14.70
12.73
117.89
117.89
10,000
10,000
36
36
HI 10
10 :1
10
100,000
11.38
98.24
10,000
36
HI 15
15 :1
150,000
9.30
73.68
10,000
36
Additional features:
Temperature
Thread connection
Material
Weight
Length
Diameter
ambient
FNPT (Low pressure side ) and FHP (High pressure side)
600 mm
90 mm to 120 mm depending on the model.
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
74/81
STEAM GENERATOR
The steam generator is designed to produce super heated steam at temperature up to 325C and
pressure to 2,500 psi. This stand alone device can be incorporated in a core flood rig for
evaluating thermal EOR processes. Typical test consists of injecting steam or hot water into a
core sample and determining the expected oil recovery.
FEATURES
Maximum working pressure
Maximum working temperature
Heater
Wetted parts
Water supply
2,500 psi
325C
Electrically operated
stainless steel
Distilled water
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
75/81
The air bath series are precision air baths providing uniform constant temperature over a wide
operating range. Access to the interior of the bath is through front mounted door. Circulating
fans provide excellent circulation of the air inside the bath to ensure temperature uniformity
throughout the bath. An external temperature controller indicates the internal temperature of the
bath.
FEATURES
Temperature
Temperature increment
Operating environment
ambient to 175C
+/- 0.5C
18C to 30C, 20 to 70% humidity
Model 700 :
Internal dimensions
Overall dimensions
Power requirement
Model 1000 :
Internal dimensions
Overall dimensions
Power requirement
Model 1300 :
Internal dimensions
Overall dimensions
Power requirement
Model 1900 :
Internal dimensions
Overall dimensions
Power requirement
BENEFITS
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
76/81
Designed to provide hydraulic pressure for Hg free fluid transfer at pressure condition.
Maximum output is 10,000 psi. The system comes complete with air driven liquid pump,
pressure gauge, air regulator, relief valve and frame.
FEATURES
Max outlet pressure
Air inlet
Wetted parts
10,000 psi
30 to 145 psi (10 bar).
Stainless steel,
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
77/81
meet your most demanding requirements for precision laboratory or field measurement
instrumentation. The instrument includes a high precision analog pressure transducer, a
rupture disc for over pressure protection, a five digit digital display and a data logging
software for automatic data acquisition.
FEATURES
Model
Pressure range
Accuracy
Port connection
Wetted part
Power supply
DPG series
up to 10,000 psi (other range available)
0.1% FS
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
78/81
DEADWEIGHT GAUGE
Primary pressure standard designed for high pressure calibration applications. The device
consists of a vertically mounted precision lapped piston and cylinder assembly. Accurately
calibrated masses are loaded onto the piston, which rises freely within its cylinder. These
weights balance the upward force created by the application of pressure within the system.
Delivered with a carrying case.
FEATURES
Model
Operation
Pressure range
Accuracy
Dual piston
Oil operated
1 bar (15 psi) to 1,100 bar (16,000 psi)
0.015% RDG
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
79/81
Back-up power protection used in most laboratories against electrical noise, sags, surges and
brownouts which affect the sensitivity of the electrical components of the laboratory equipment.
FEATURES
Output power capacity
Max configurable power
Input voltage
Output voltage
Efficiency at full load
Back up time
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
80/81
OTHER COMPONENTS
Vacuum pump: Based on double stage rotary vane pump and featuring a max pumping speed
of 2.5 m3/h and a vacuum rate of 10-3 mbar.
Air compressor: Designed to generate compressed air of 7 to 10 bar when compressed air is not
available.
Thermostatic bath: Designed to provide heating and cooling source with an accurate
regulation.
Fraction collector: Inline effluent fraction collector for collecting up to 70 individual liquid
sample fractions automatically on a time or volume basis
PH meter: Inline pH probe and meter for monitoring effluent pH as a function of time.
VINCI TECHNOLOGIES
Parc de l'Ile, 27B rue du Port, 92022 NANTERRE
Phone: 331 41 37 92 20 Fax: 331 41 37 04 76
e-mail: vincinet@vinci-technologies.com
http://www.vinci-technologies.com
81/81