Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
GENERAL
tm=t+c
Where
tm
t
c
minimum required thickness, including mechanical, corrosion, & erosion allowances, mm.
pressure design thickness for internal pressure, mm.
sum of the mechanical allowances (thread or groove depth) plus corrosion & erosion allowances, mm.
10.86
9.36
1.5
1.
t=(PxD)/2(SxExW+PxY)
9.36
2. t=P(d+2c)/2[SxExW-P(1-Y)]
Where
P
D
S
E
W
Y
d
4.2
406.4
88.25
1
1
0.7
364.40
8.87
h
b
Th
Tb
d1
199.35
d2
199.35
L4
42.19
Tb
11.38
Th
18.38
Tr
18.4
th
9.36
tb
5.12
90
Db
Dh
21
13
219.10
406.40
199.35
126.43
199.35
3.
42.19
43.09
1865.70
AVAILABLE AREA
A2 + A3 + A4 >= A1
Where
A2
1498.33
A3
401.51
A4
-34.14
Dr
406.4
Sr
88.25
ha
Height of the fillet weld between run pipe & reinforcement ring, mm.
3.00
hb
Height of the fillet weld between branch pipe & reinforcement ring, mm.
3.00
1498.33
2. A3 = 2L4(Tb - tb - c)/sin
401.51
3. A2 + A3
1899.85
NO
-34.14
3441.64
18.00
NOTES:
1. All values are rounded of upto two decimal places.
2. Some nomenclatures which are not present in the figure have been added for carrying out calculations.
3. Height and base of the fillet welds is assumed to be equal.
GENERAL
tm=t+c
Where
tm
t
c
minimum required thickness, including mechanical, corrosion, & erosion allowances, mm.
pressure design thickness for internal pressure, mm.
sum of the mechanical allowances (thread or groove depth) plus corrosion & erosion allowances, mm.
6.62
5.12
1.5
1.
t=(PxD)/2(SxExW+PxY)
5.12
2. t=P(d+2c)/2[SxExW-P(1-Y)]
Where
P
D
S
E
W
Y
d
4.20
219.1
88.25
1
1
0.4
193.10
4.80