Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
With the help of a neat sketch explain the construction and working of a
roller crusher and write the important equations for roll crusher.
A silty soil containing 14% moisture was mixed in a large Muller mixer
with 10.0 weight percent of a tracer consisting of dextrose and picric acid.
After 3 minutes of mixing, 12 random samples were taken from the mix and
analyzed calorimetrically for tracer materials. The measured concentrations
in the samples were, in weight percent tracer, 10.24, 9.30, 7.94,10.24, 11.08,
10.03, 11.91, 9.72, 9.20, 10.76, 10.97 and 10.55. Calculate the mixing index.
Define Power number and Reynolds number and their relation in liquid
mixing.
Write statement and equation of Kicks law. A set of crushing rolls of 1400 mm diameter
by 400 mm width of face. Minimum spacing between two rolls is 10 mm and the angle of
nip is 30. What is the maximum permissible size of feed?
A certain set of crushing rolls of 150 cm in diameter by 50 cm width face. They
are set so that the crushing surfaces are 1.25 cm apart at the narrowest point. The
manufacture recommends 100 rpm as the roll speed. They are to crush a rock
having a specific gravity of 2.35 and angle of nip is 30 0.
(a) What are the maximum permissible size of feed and the maximum actual
capacity in metric tons per hour if the actual capacity is 12 % of the theoretical?
(b) After long use, the tires on the rolls of the mill have become roughened so
that the angle of nip is 320.30. What will now be the maximum permissible size
of feed and the capacity of the rolls?
Explain impellers used for highly viscous liquid and use of draft tubes.