Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
EQUIPMENT
Section 4:
4
Page
Pump-in Sub
10
Bleed-Off Sub
11
Lightweight Lubricator
12
13
14
15
16
17
18
19
www.elmar.co.uk
S
4
PRESSURE CONTROL
EQUIPMENT
Section 4:
4
Page
20
21
22
Pump-in Sub
23
24
25
26
27
28
29
Bleed-Off Sub
30
Lightweight Lubricator
31
32
33
34
35-36
37-38
39
40
41
www.elmar.co.uk
S
4
PRESSURE CONTROL
EQUIPMENT
Section 4:
4
Page
Transport Racks:
Slickline Transport Baskets
42
43
44
45
46
47
48
49
50-51
52
Auxiliary Equipment:
Hydraulic Ball Valve
53
54
55
56
57
58
59
www.elmar.co.uk
S
4
PRESSURE CONTROL
EQUIPMENT
SSR Design and Manufacture Pressure Control Equipment and Accessories for Slickline and
Braided Cable Operations.
A full range of equipment is available, from the basic 2 1/2" ID 5,000psi WP manual items such as
Stuffing Boxes and the Silver Series Wireline Valve, through to the SSR Gold Series Dual and Triple
Wireline Valves that have been manufactured for applications with a WP of up to 15,000psi and a
maximum 9" through bore.
The range of accessories is extensive with items such as:
Test Caps
Lift Caps
Wireline Valve Work Stands
Clamps for Slickline
Braided Cable and Lubricator Clamps
Hay Pulley's
Sheave Wheels
Lubricator Dolly's
Crossovers
Flanged Adaptors
Stuffing Box
Chemical
Injection Sub
Optional Tool
Catcher
Lubricator
Lubricator
Lightweight Sheave
SSR International
design, manufacture and certify Pressure Control Products to
meet and exceed the following
established industry standards:
API 6A
API 17D
NACE MR0175
NPD Regulations
Statutory Instrument 1996 No. 913
Statutory Instrument 1998 No. 2306
Statutory Instrument 1998 No. 2307
Ported Lubricator
Tool Trap
Single Hydraulic
Wireline Valve
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Wellhead Adapter Flange provides a means of connecting the wireline valve and
lubricator assembly to the wellhead in a safe and secure manner.
The Elmar Wellhead Adapter Flange consists of a quick union machined on a standard API flange.
The upper end has a standard Bowen type, Otis type or Elmar quick union and can be supplied
with a blanking plug and collar if required.
Elmar wellhead adapter flanges are available in various bore sizes from 2 1/16" to 7 1/16" and
working pressure up to 15,000 psi.
Elmar will design and manufacture well-head adapter flanges for all API standard models. Elmar
adapter flanges are fully traceable and certified to API 6A.
Thread
Size
Seal Dia
Thread Per
Inch (TPI)
2
4
I.D.
Typical Elmar
Adapter Flange L-972237
API Ring
Groove
Number
Working
Pressure
3 1/16
BX-154
10,000 psi
H2S
3 1/16
BX-154
10,000 psi
H2S
Part
Number
Flange
Size
L-972237
L-975187
Service
Quick Union
Female Box
L-974529
4 1/16
R-39
5,000 psi
H2S
L-976006
4 1/16
BX-155
10,000 psi
H2S
L-972366
4 1/16
BX-155
10,000 psi
H2S
L-974533
5 1/2
R-44
5,000 psi
H2S
L-974775
7 1/16
R-46
5,000 psi
H2S
L-978774
3 1/16
BX-154
15,000 psi
H2S
L-979123
4 1/16
BX-155
15,000 psi
H2S
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
Pump-in Sub
The Pump-In Sub (PIS) is normally positioned below the Wireline Valve and above the Wellhead.
Its main function is to allow well control by pumping fluid below a closed Wireline Valve.
The PIS has quick unions top and bottom, and a WECO (Hammer Union) type side connection.
Pump-in Subs are normally supplied with a blind plug & nut on the WECO port. A suitable valve is
needed to operate the PIS, replacing the blind plug. Pump-in Subs can also be used for fluid
sampling or inhibitor injection. Specially designed Pump-in Subs, with different top and bottom
unions are used as wellhead adapter x-overs.
Pump-in Sub
Plug
Valve
Wellhead
Adapter
Flange
ACCESSORIES
Service
Connection
10,000 psi
H2S
2 1502
15,000 psi
H2S
2 2202
Part Number
Description
Working Pressure
L-840805
Plug Valve
L-840605
Plug Valve
PART NUMBERS
Part
Number
I.D.
Working
Pressure
Service
Connection
Side Outlet
L-972052
10,000 PSI
H2S
2 1502
L-979873
10,000 PSI
STD
2 1502
L-979098
10,000 PSI
H2S
2 1502
L-977282
10,000 PSI
H2S
2 1502
L-978771
15,000 PSI
H2S
2 2202
L-978110
10,000 PSI
H2S
2 1502
L-972224
4.06
10,000 PSI
H2S
2 1502
L-979733
4.5
15,000 PSI
H2S
2 2202
L-978891
5.5
5,000 PSI
H2S
2 1502
L-979264
6 3/8
10,000 PSI
H2S
2 1502
www.elmar.co.uk
3
4
PRESSURE CONTROL
EQUIPMENT
The SSR Silver Series Wireline Valve is a hydraulic compact wireline valve of monobloc
construction designed specifically to be used as a Single or Dual, for Slickline and Braided Line
operations.
Unions
8 1/4 4x2 'BB'
(6.750") Seal Dia.
5,000psi
4
4
Working Pressure
5,000psi
Unions
4 3/4" - 4THD 'BB'
5,000psi
10,000psi
10,000psi
Wire Size
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
Assembly Number
A001-017
A001-018
A001-019
A001-020
A001-021
A001-022
A001-023
A001-024
A001-025
A001-026
A001-027
A001-028
A001-029
A001-030
A001-031
A001-032
Wire Size
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
Assembly Number
A003-173
A003-174
A003-175
A003-176
A003-168
A003-170
A003-171
A003-172
A003-165
A003-166
A003-177
A003-178
A003-144
A003-179
A003-180
A003-181
Wire Size
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
Assembly Number
A005-093
A005-121
A005-122
A005-123
A005-092
A005-124
A005-125
A005-126
A005-098
A005-127
A005-128
A005-129
A005-111
A005-130
A005-131
A005-132
5,000psi
Unions
4 3/4" - 4x2 'BB'
10,000psi
10,000psi
10,000psi
10,000psi
Wire Size
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
Unions
9 7/8" - 4x2 'BB'
5,000psi
10,000psi
10,000psi
Wire Size
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
5,000psi
Unions
7" - 5THD 'BB'
10,000psi
10,000psi
Assembly Number
A009-085
A009-143
A009-144
A009-145
A009-068
A009-069
A009-070
A009-071
A009-146
A009-147
A009-148
A009-149
A009-073
A009-074
A009-075
A009-076
Assembly Number
A007-139
A007-140
A007-141
A007-142
A007-135
A007-143
A007-144
A007-145
A007-146
A007-147
A007-148
A007-149
A007-104
A007-150
A007-151
A007-152
PRESSURE CONTROL
EQUIPMENT
The SSR Gold Series Wireline Valve is a hydraulic compact wireline valve of monobloc
construction designed specifically to be used as a single, Dual, Triple or Quadruple Wireline Valve
for Slickline, Braided Line and Electric Line Well Service operations.
Unique 'Gib Key' design eliminates the need for a slot in the Ram
Cavity and therefore allows complete flexibility to arrange Ram
configuration as required to include inverting Rams for Grease
Injection.
5,000psi
Unions
4 1/2" - 4x2 'BB'
10,000psi
10,000psi
Wire Size
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
Assembly Number
A003-186
A003-187
A003-188
A003-189
A003-193
A003-190
A003-191
A003-192
A003-119
A003-182
A003-149
A003-114
A003-185
A003-183
A003-121
A003-184
Wire Size
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
Assembly Number
A005-086
A005-133
A005-135
A005-134
A005-136
A005-137
A005-138
A005-139
A005-140
A005-141
A005-142
A005-143
A005-144
A005-145
A005-146
A005-147
Wire Size
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
Assembly Number
A007-093
A007-121
A007-122
A007-123
A007-092
A007-124
A007-125
A007-126
A007-098
A007-127
A007-128
A007-129
A007-111
A007-130
A007-131
A007-132
Unions
9 7/8" 4x2 'BB'
5,000psi
10,000psi
10,000psi
Unions
7" - 5THD 'BB'
5,000psi
10,000psi
10,000psi
Wire Size
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
0.125"
3/16"
7/32"
5/16"
Assembly Number
A009-082
A009-150
A009-084
A009-151
A009-152
A009-153
A009-154
A009-155
A009-156
A009-157
A009-158
A009-159
A009-160
A009-101
A009-161
A009-099
Wire Size
0.125"
3/16"
7/32"
5/16"
Assembly Number
A104-004
A104-005
A104-006
A104-007
Unions
12" - 4THD 'OO'
Unions
8 1/4" - 4x2 'BB'
(6.750") Seal Dia.
5,000psi
10,000psi
10,000psi
5
4
PRESSURE CONTROL
EQUIPMENT
The Elmar Lightweight Wireline Valve is available in 3 I.D., 10,000 psi working pressure, H2S
service, in either single, dual or triple configurations. (Soon to be available in 4, 5 and 6 3/8 I.D.)
The Elmar Lightweight Wireline Valve gives positive protection during well service operations,
when operating with slickline, braided wireline and electric line.
All Elmar Lightweight Wireline Valves are up to 60% lighter than previous generation Wireline
Valves and incorporate the following features as standard : Lightweight, allowing easier handling
3 Single 66kg, (146lb), Dual 114kg, (251lb)
and Triple 162kg, (357lb)
Compact size, allowing shorter rig-up heights
Back-up manual closure
Threaded quick unions, allowing the use of any
Bowen type or Otis type union without changing
the body
Ram position indicator rods
Manifold blocks with integral equalisation, glycol
and grease injection facilities
Maximum working pressure 10,000 psi H2S service
Maximum hydraulic working pressure 3,000 psi
API 6A and NACE compliant
6
4
wireline sizes
PART NUMBERS
Lightweight
Slickline
Stuffing Box
Part
Number
I.D.
Working
Pressure
Service
Single/Dual
Triple
Quick Union
L-974111
10,000 PSI
H2S
Single
L-974223
10,000 PSI
H2S
Dual
L-974224
10,000 PSI
H2S
Triple
MANIFOLDS
Grease/Glycol Injection
and Equalistion
Equalisation Valve
Lightweight
Lubricator
Section
Bleed Off
Glycol
Injection
3 Lightweight
Grease
Injection
Wireline Valve
Equalisation Valve
www.elmar.co.uk
Gauge Port
Manual
Handle
Stored
PRESSURE CONTROL
EQUIPMENT
The Elmar Quick Test Sub (QTS) is designed to save rig time while pressure testing the Wireline
Pressure Control Equipment String when multiple wireline runs are required.
The Elmar Quick Test Sub is inserted either above or below the wireline valve at the position of the
joint normally opened to insert and retrieve tools from the well. After performing the first pressure
test to check the integrity of the whole String, subsequent pressure tests can be made using the
Quick Test Sub to verify the integrity of the joint disconnected, rather than having to test the whole
assembly. This is achieved by connecting a small hydraulic hand-pump to the Quick Test Sub and
testing the joint O ring seal from the outside. It is estimated that the use of the Elmar Quick Test
Sub can reduce the time needed to pressure test the String at each subsequent test by more than
1/2 hour.
7
4
PART NUMBERS
Part
Number
I.D.
Working
Pressure
L-971404
L-972235
L-970918
L-971299
Service
Connections
Seal Kit
10,000 psi
H2S
L-971404K
10,000 psi
H2S
L-972235K
10,000 psi
H2S
L-970918K
10,000 psi
H2S
L-971299K
L-972222
4.06
10,000 psi
H2S
L-972222K
L-973101
5.125
10,000 psi
H2S
L-973101K
Part Number
L-690573
Description
L-690587
25ft
L-690586
50ft
Hose Assembly
6mm ID, 10,000psi Hose
with Quick Connectors
and Dust Covers
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Hydraulic Tool Trap with external indicator is installed between the Wireline Valve and
the lubricator string. It prevents the loss of wireline tools downhole in the event of the wire being
pulled-off the rope socket, by retaining the dropping tool on a flapper. The flapper has an opening
larger than the wireline, but smaller than the tool string.
The flapper is operated by a hydraulic actuator, through an external handle, connected to the
flapper with a low-torque pressure-balanced shaft. The external handle doubles as a tool passage
indicator. The tool string may be pulled freely upwards through the tool trap. The flapper will move
upwards, together with the external handle, indicating tool passage. As soon as the string bottom
has cleared the flapper, the flapper will drop back into the trap position, pushed by a torsion spring.
The flapper can be lifted remotely when running a tool in the well by activating the piston in the
hydraulic actuator. Pumping back the piston to its original position allows the flapper to return to its
trap position.
The hydraulic actuator can be operated by a dual output manual pump or with an Elmar Hydraulic
Control Module.
Hydraulic
Actuator
8
4
Lightweight: L-971169
Positive tool passage indicator
Pressure-balanced flapper shaft
Remote hydraulic operation. Enhanced
operational safety
Can be operated manually in case of hydraulic
failure
Option:
Manual Tool Trap with external indicator
CROSS SECTION DETAIL
Flapper
Handle
ACCESSORIES
Part Number
PART NUMBERS
Part Number
I.D.
Working Pressure
Service
Quick Union
L-974814
2 1/2
15,000 psi
H2S
L-976271
2 1/2
10,000 psi
H2S
L-971169
10,000 psi
H2S
L-978383
5,000 psi
H2S
L-974828
10,000 psi
H2S
L-974794
10,000 psi
H2S
L-972219
4 1/16
10,000 psi
H2S
L-978441
5 1/2
5,000 psi
STD
Description
L-690750
L-690615
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The SSR Integral Lubricator Section is a pressure containing cylinder used when performing
wireline operations. Its purpose is to allow the Wireline Tool String to be raised above the wellhead
prior to and after wireline operations, thereby enabling the wellhead valve to be opened and closed,
allowing entry and exit from the well bore. During slickline operations, three Lubricator Sections are
normally used, each having a different ID, the uppermost section having the smallest, then
opening out to the lower section with largest ID. During electric line operations the lubricators
normally have the same ID.
Unions
5 1/2" - 4x2 'BB'
5,000psi
10,000psi
10,000psi
Length
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
Assembly Number
A014-123
A014-137
A014-098
A014-138
A014-100
A014-139
A014-116
A014-140
Length
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
Assembly Number
A016-059
A016-089
A016-067
A016-076
A016-060
A016-090
A016-091
A016-097
Unions
7" - 5THD 'BB'
5,000psi
10,000psi
10,000psi
SPECIFICATIONS
Pressure Rating
Service
Up to 15,000psi
H2S and Standard Service
www.elmar.co.uk
9
4
PRESSURE CONTROL
EQUIPMENT
The SSR Lubricator Section is used when performing wireline or electric line operations with 1/2
NPT Bleed Port Fitted. Quick Unions are of the screwed type with a SSR ACME thread, which
incorporates primary O Ring Seal with metal back-up. Det Norske Veritas and Lloyds Design type
approval is available if required.
Unions
4 3/4" - 4THD BB
5,000psi
10,000psi
10,000psi
Length
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
Assembly Number
A012-002
A012-003
A012-043
A012-044
A012-006
A012-007
A012-008
A012-009
Length
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
Assembly Number
A014-014
A014-015
A014-092
A014-011
A014-009
A014-003
A014-019
A014-021
Length
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
Assembly Number
A016-004
A016-002
A016-006
A016-007
A016-008
A016-026
A016-009
A016-010
Length
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
Assembly Number
A018-009
A018-010
A018-055
A018-114
A018-115
A018-001
A018-013
A018-002
Length
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
Assembly Number
A020-005
A020-006
A020-007
A020-008
A020-116
A020-117
A020-011
A020-012
Unions
5 1/2" - 4x2 'BB'
5,000psi
10,000psi
10,000psi
10,000psi
10,000psi
10
4
Unions
7" - 5THD 'BB'
Unions
8 1/2" - 4x2 'BB'
(6.750") Seal Dia.
8 1/4" - 4THD 'OO'
10,000psi
10,000psi
Unions
9 7/8" - 4x2 'BB'
5,000psi
10,000psi
10,000psi
SPECIFICATIONS
Pressure Rating
Service
Up to 15,000psi
H2S and Standard Service
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
Bleed-Off Sub
For applications when a bleed-off port is required on the lubricator string , subs are available with
a 1/2" NPT Port for connection of a suitable valve.
ELMAR
Slickline
Head
Lubricator Sections
11
4
Bleed-Off Sub
PART NUMBERS
I.D.
Working
Pressure
Service
Quick Union
Bleed
Port
L-974292
10,000 psi
H2S
1/2 NPT
L-974293
4 1/16
10,000 psi
H2S
1/2 NPT
L-970915
10,000 psi
STD
1/2 NPT
L-970916
10,000 psi
H2S
Part
Number
ACCESSORIES
Part Number
Description
L-500060
Pump-in
Sub
Wellhead Adapter
Flange
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
Lightweight Lubricator
The Elmar "Lite" lubricators enable the wireline tool string to be introduced or retrieved from a well
bore under pressure. They are normally positioned above the Wireline Valve, Tool Trap or Quick
Test Sub. By using high strength Stainless Steel Alloys, the weight of a lubricator section is reduced
by up to 70% with respect to conventional integral lubricators.
The Elmar "Lite" lubricator consists of four basic parts: a quick union collar, a male quick union, a
lubricator tube, and a female quick union. The quick unions are manufactured in H2S resistant alloy
steel to prevent galling.
Elmar "Lite" lubricators are supplied with a 3" or 4 1/16" bore, and are rated 10,000 psi H2S
service. The Elmar Lightweight quick unions have been selected for optimum weight reduction and
to prevent unsafe cross-string assembly. Upper and lower adapters are available to connect
existing equipment. These are rated 5,000 psi or 10,000 psi depending on the type of connection.
Corrosion Resistant Tube made from high
strength NACE Certified Stainless Steel
Quick unions are coupled through Premium
Elmar Lite Coupling:
- Tube-to-union seal is metal-to-metal
backed-up by O-Ring
- Special handling tools supplied. Calibrated
torque is not required.
Bending stresses at the thread undercut are
minimised.
12
4
3 Torque Tool
L-973958
Upper
Connections
Lower
Connections
I.D.
W.P.
Service
L.
W.
L-971246
4 3/4-4x2 (3.750)
Elmar Box
4 3/4-4x2 (3.750)
Elmar Pin
10K
H2S
4ft
54 lb
L-971247
4 3/4-4x2 (3.750)
Elmar Box
4 3/4-4x2 (3.750)
Elmar Pin
10K
H2S
5ft
63 lb
L-971248
4 3/4-4x2 (3.750)
Elmar Box
4 3/4-4x2 (3.750)
Elmar Pin
10K
H2S
6ft
72 lb
L-971249
4 3/4-4x2 (3.750)
Elmar Box
4 3/4-4x2 (3.750)
Elmar Pin
10K
H2S
8ft
90 lb
L-971251
4 3/4-4x2 (3.750)
Elmar Box
4 3/4-4x2 (3.750)
Elmar Pin
10K
H2S
10ft
108 lb
Buttress Type
Thread
Up to
70%
lighter
Upper
Connections
Lower
Connections
I.D.
W.P.
Service
L.
W.
L-971846A
6 1/8-4x2 (4.750)
Elmar Box
6 1/8-4x2 (4.750)
Elmar Pin
4.06
10K
H2S
4ft
96 lb
L-971846B
6 1/8-4x2 (4.750)
Elmar Box
6 1/8-4x2 (4.750)
Elmar Pin
4.06
10K
H2S
5ft
113 lb
6 1/8-4x2 (4.750)
L-971846C
Elmar Box
6 1/8-4x2 (4.750)
Elmar Pin
4.06
10K
H2S
6ft
129 lb
6 1/8-4x2 (4.750)
L-971846D
Elmar Box
6 1/8-4x2 (4.750)
Elmar Pin
4.06
10K
H2S
8ft
161 lb
6 1/8-4x2 (4.750)
Elmar Box
6 1/8-4x2 (4.750)
Elmar Pin
4.06
10K
H2S
10ft
193 lb
L-971846E
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Chemical Injection Sub is designed to apply a de-icing agent or corrosion inhibitor to the
wireline during well service operations.
Installed below the grease injection control head or slickline stuffing box, the Elmar chemical
injection sub utilises replaceable felt packings to coat the wireline and prevent the chemical from
passing downhole.
The Elmar chemical injection sub consists of a one piece body with integral quick unions on both
ends, a quick union collar assembly, a manifold injection block assembly with integral check valve
and a felt packing retainer assembly. The check valve assembly is designed for easy and quick
replacement.
Elmar chemical injection subs are available in a full range of wire sizes, and 5,000 psi to 15,000 psi
working pressures.
13
4
Check Valve
Assembly
Lightweight: L-972901/L-972877
One piece body with integral quick unions
Integral check valve
Available to suit all wire sizes
Other sizes available upon request
PART NUMBERS
Part Number Wire Size
Working Pressure
Service
Quick Union
10,000 psi
H2S
L-972901
.125
L-976217
.125
5,000 psi
H2S
L-978641
.125
10,000 psi
H2S
L-972877
.125
10,000 psi
H2S
L-978049
.125
10,000 psi
H2S
L-972683
.125
10,000 psi
H2S
L-970273
7/32
5,000 psi
H2S
L-976595
7/32
10,000 psi
STD
L-974664
7/32
15,000 psi
H2S
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Hydraulic Tool Catcher is a safety device for installation below the Grease Injection Head
or Slick Line Stuffing Box. If the tool is pulled into the top of the lubricator and the wire stripped from
the rope socket, the Tool Catcher will engage the tool's fishing neck and prevent the loss of the tool
string into the well bore. The Tool Catcher is designed to be fail-safe: it is permanently in the catch
position and requires hydraulic pressure to release.
Elmar Hydraulic Tool Catchers for electric line are normally supplied with an integral ball check
valve assembly, and a top connection into which a grease head can be directly screwed.
For slick line operations Elmar Hydraulic Tool Catchers are available with quick unions top and
bottom.
Elmar Hydraulic Tool Catchers are available with ratings from 5,000 psi to 15,000 psi WP, STD and
H2S Service. Collet sizes vary from 1" to 1 3/4" fishing necks. Multi-catch options are available in
two ranges: 1" to 1 3/4" and 1 3/16" to 2 5/16".
PART NUMBERS
Ball Check
Part
Number
Collet
Size
Working
Pressure Service
Quick Union
Male Pin
L-971167
1 3/16
10,000 psi
H2S
4 3/4-4x2
(3.750) Elmar
L-974439
1 3/16
10,000 psi
STD
4 3/4-4thd
(3.750) Bowen
L-974440
1 3/16
10,000 psi
STD
4 3/4-4thd
(3.750) Bowen
L-972218
1 3/16
10,000 psi
H2S
6 1/8-4x2
(4.750) Elmar
L-974569
1 3/16
15,000 psi
H2S
6 5/16-4thd
(3.750) Bowen
Valve
14
4
L-974661
1 3/16
10,000 psi
H2S
6 5/16-4thd
(4.375) Bowen
L-974715
1 3/16
10,000 psi
H2S
8 1/4-4x2
(6.000) Bowen
L-974816
1 3/8
10,000 psi
H2S
5 3/4-4thd
(4.000) Otis
L-974919
1 3/16
5,000 psi
H2S
4 3/4-4thd
(3.750) Bowen
L-974997
1 3/16
5,000 psi
H2S
4 3/4-4thd
(3.750) Bowen
H2S
5 3/4-4thd
(4.000) Otis
L-975268
Hydraulic
Tool Catcher
1 3/16
10,000 psi
L-975279
1 3/16
10,000 psi
H2S
6 5/16-4thd
(4.375) Bowen
L-975719
1 3/16
10,000 psi
H2S
8 1/4-4x2
(6.000) Bowen
L-975846
1 3/16
5,000 psi
STD
5-4thd
(3.500) Otis
L-976010
1 3/8
10,000 psi
H2S
8 1/4-4x2
(6.000) Bowen
L-976157
1 3/16
10,000 psi
H2S
6 5/16-4thd
(4.375) Bowen
6 5/16-4thd
(4.375) Bowen
L-976245
1 3/8
10,000 psi
H2S
6 5/16-4thd
(4.375) Bowen
L-690730
Description
Description
L-690760
50ft
L-690740
100ft
Hose Assembly
1/4 ID 100 R2AT Hose with
1/4 NPT Male Hose Ends
and Snaptite Male and Female Connectors
Top Connection
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Quick-Interchange Tool Catcher allows the field crew to quickly and easily change
between slickline and electric line operations without remaking either rope socket.
Stuffing Box
Enviro
Line Wiper
Slickline Stuffing
Box & Blowout Plug
Grease Head
BCV with
QUICK-INTERCHANGE TOOL CATCHER SYSTEM
Elmar Quick
Union
Part Number
Electric Line
Cable Head
Description
L-979540
L-979184
L-971444
Cable Head
Slickline
Cable Head
Protector
Sleeve
L-972019
Ball Check Valve 10,000 psi, H2S, with 3 3/4-5thd (2.500) Elmar male
pin and collar
L-975279
Combination Tool Catcher and Ball Check Valve, 10,000 psi, H2S, with
6 5/16-4thd (3.750) Bowen male pin and collar - fish neck size to be
specified
L-978707
Combination Tool Catcher and Ball Check Valve, 10,000 psi, H2S, with
6 1/2-4thd (3.750) Otis male pin and collar - fish neck size to be
Split Tool
specified
L-971167
Stop
Combination Tool Catcher and Ball Check Valve, 10,000 psi, H2S, with
4 3/4-4x2 (3.750) Elmar male pin and collar - fish neck size to be
specified
Handling Sub
Elmar Quick
Union
Tool Catcher
L-971174
L-972027
Similar equipment is available for alternative flotube types, quick union sizes, working pressures and
services.
A Split Tool Stop is available for modification of many types of existing Elmar Combination Tool Catchers
with Ball Check Valve so as to up-grade to the Quick-Interchange feature.
Please ask for details.
www.elmar.co.uk
15
4
PRESSURE CONTROL
EQUIPMENT
The SSR Stuffing Box is used when carrying out wireline operations with slickline under pressure.
The wireline is passed over the Sheave Wheel and fed down through packing in the Stuffing Box
Body. During operation the packing is tightened against the solid wireline by a packing nut which is
either manually or hydraulically actuated. This minimises any leakage of fluid resulting from well
pressure. The Stuffing Box incorporates a 'Blow-out' Plug, which in the event of the wireline
parting or being detached from the Rope Socket, will automatically seal and contain the well
pressure. The Stuffing Box includes a male quick union connection and is positioned on top of the
Lubricator Stack.
Unions
5 1/2" - 4x2 'BB'
Wire Size
0.092"
0.108"
Assembly Number
A035-156
A035-117
5,000psi
0.092"
0.108"
A035-152
A035-129
10,000psi
0.092"
0.108"
A035-157
A035-105
10,000psi
0.092"
0.108"
A035-096
A035-131
15,000psi
0.092"
0.108"
A035-108
A035-107
Wire Size
0.092"
0.108"
0.125"
0.092"
0.108"
0.125"
0.092"
0.108"
0.125"
0.092"
0.108"
0.125"
0.092"
0.108"
0.125"
Assembly Number
A035-155
A035-150
A035-115
A035-122
A035-112
A035-124
A035-154
A035-114
A035-120
A035-095
A035-100
A035-123
A035-177
A035-113
A035-178
5,000psi
16
4
Unions
5 1/2" - 4THD 'BB'
10,000psi
10,000psi
15,000psi
SPECIFICATIONS
Wire Size
Sheave Size
Pressure Rating
Service
0.092"/0.108"/0.125"
14" and 16"
Up to 15,000psi
H2S and Standard Service
ACCESSORIES
L-690730
L-690740
L-690760
PRESSURE CONTROL
EQUIPMENT
The SSR Stuffing Box is used when carrying out wireline operations with slickline, under pressure.
The Wireline is passed over the Sheave Wheel and fed down through packing in the Stuffing Box
body. During operation the packing is tightened against the solid wireline by a packing nut which
is manually actuated. This minimises any leakage of fluid resulting from well pressure. The Stuffing
Box incorporates a 'Blow-out' Plug, which in the event of the wireline parting or being detached from
the Rope Socket, will automatically seal and contain the well pressure. The Stuffing Box includes
a male quick union connection and is positioned on top of the Lubricator Stack.
Unions
5 1/2" - 4x2 'BB'
Wire Size
0.092"
0.108"
Assembly Number
A035-169
A035-170
5,000psi
0.092"
0.108"
A035-171
A035-172
10,000psi
0.092"
0.108"
A035-173
A035-174
10,000psi
0.092"
0.108"
A035-175
A035-176
Wire Size
0.092"
0.108"
0.125"
0.092"
0.108"
0.125"
0.092"
0.108"
0.125"
0.092"
0.108"
0.125"
Assembly Number
A035-158
A035-159
A035-160
A035-161
A035-162
A035-163
A035-164
A035-165
A035-166
A035-167
A035-125
A035-168
5,000psi
Unions
5 1/2" - 4THD 'BB'
10,000psi
10,000psi
SPECIFICATIONS
Wire Size
Sheave Size
Pressure Rating
Service
0.092"/0.108"/0.125"
14" and 16"
Up to 10,000psi
H2S and Standard Service
www.elmar.co.uk
17
4
PRESSURE CONTROL
EQUIPMENT
The Elmar Hydraulic Slickline Stuffing Box is designed to pack-off all sizes of solid wireline up to
0.125, with safety and convenience. It is lightweight, compact and simple to operate. Positioned at
the uppermost point of the pressure control equipment string, the Elmar slickline stuffing box
incorporates a blow-out plug to automatically shut-in the well pressure in the event of the slickline
breaking or being stripped from the rope socket.
The Elmar slickline stuffing box consists of a chamber which contains packing with an external
adjustable nut. The slickline passes through the packing and the nut is hydraulically tightened to
the point where leakage around the line, caused by well pressure, is reduced to a minimum. A 16
diameter sheave bracket assembly and a male quick union assembly are supplied with the stuffing
box as standard. If required a manual packing nut can be supplied.
Elmar slickline stuffing boxes are available for a full range of wire sizes, and from 5,000 psi to
15,000 psi working pressures.
Lightweight
Slickline
Stuffing Box
18
4
Lightweight
Lubricator
Section
3 Lightweight
Wireline Valve
PART NUMBERS
Part
Number
Wire
Size
Working
Pressure
Service
Manual/
Hydraulic
Bottom Connection
L-975765
.092
5,000 psi
STD
Manual
L-975275
.108
5,000 psi
H2S
Manual
L-690730
L-978779
.108
5,000 psi
H2S
Hydraulic
L-690740
L-970281
.108
10,000 psi
STD
Hydraulic
L-690760
L-978723
.108
5,000 psi
STD
Hydraulic
L-970134
.108
10,000 psi
H2S
Hydraulic
Overall Height
Weight
L-978775
.108
10,000 psi
H2S
Hydraulic
85cm (33.5)
27kg (59lbs)
L-978394
.108
15,000 psi
H2S
Hydraulic
L-977454
.108
15,000 psi
H2S
Hydraulic
L-977132
.125
5,000 psi
H2S
Hydraulic
L-972551
.125
5,000 psi
H2S
Hydraulic
L-972176
H2S
Hydraulic
2-10thd Acme
L-973827
.108/.125
5,000 psi
H2S
Hydraulic
L-972452
.108/.125
10,000 psi
H2S
Hydraulic
ACCESSORIES
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Liquid Seal Control Head is designed to seal around a slickline while minimising drag
and wear of both the slickline and the pack-off.
Positioned at the uppermost point of the Pressure Control Equipment string, the control head
consists of two major subassemblies, the hydraulic Pack-Off or Stuffing Box and the Flow Tubes
Assembly.
The Stuffing Box is meant to pack-off around the slickline when stationary. When the line is
moving the seal is achieved by injecting viscous grease into the flow tube stack at a pressure above
wellhead pressure. The flow tubes are closely fitting around the slickline, and the grease
seals-off effectively the narrow annular space.
The control head incorporates a ball check valve
to automatically shut-off the well pressure in the
event of pull-off or breakage of the line.
A 16" diameter sheave bracket is supplied as
standard.
The Elmar Liquid Seal Control Head is of
modular design: it can be ordered as two
separate assemblies:
Upper
Assembly
Flowtubes
Grease
Injection
Manifold
Lower Assembly
ACCESSORIES
WEIGHTS/DIMENSIONS (L-972506/L-972611)
Height
65 inches
165cm
Weight
211lbs
96kg
PART NUMBERS
Part
Number
Description
Working
Pressure
Service
Bottom Connection
L-972506
15,000 psi
H2S
N.A.
L-972507
10,000 psi
H2S
L-972611
15,000 psi
H2S
L-972612
15,000 psi
H2S
L-972613
15,000 psi
H2S
L-973047
15,000 psi
H2S
Part Number
Description
L-690644-VO1
L-690644-VO2
L-690730
L-690740
L-840890
L-440059
L-440059
Description
Line Size
L-972506AL
0.108
L-972506BL
0.125
www.elmar.co.uk
19
4
PRESSURE CONTROL
EQUIPMENT
The Elmar Pressure Control Equipment String is designed for complete control of the well pressure
during electric/stranded line operations on a "live" well.
Elmar Pressure Control Equipment Strings are fully traceable and certified by independent
authorities. They are available with 5,000 psi, 10,000 psi, 15,000 psi working pressure rating, Std
and H2S service. ID ranges from 2 1/2" to 6 3/8".
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Lightweight Pressure Control Equipment String is designed for maximum weight
reduction. With a rating of 10,000 psi, H2S Service, the string uses the proven stainless steel
Elmar "Lite" lubricators.
Weight:
(5K H2S,
4 3/4-4
Bowen)
Weight:
(10K STD,
4 3/4-4
Bowen)
Weight:
(10K H2S,
6 5/16-4
Bowen)
51kg
(112 lb)
80kg*
(176 lb)
80kg*
(176 lb)
80kg*
(176 lb)
4 3/4-4x2
(3.750) Elmar
42kg
(92 lb)
57kg
(125 lb)
62kg
(137 lb)
65kg
(143 lb)
Lubricator
4ft long
4 3/4-4x2
(3.750) Elmar
25kg
(55 lb)
45kg
(99 lb)
46kg
(101 lb)
75kg
(165 lb)
L-971251
Lubricator
10ft long
4 3/4-4x2
(3.750) Elmar
49kg
(108lb)
x 6 off
78kg
(172 lb)
x 6 off
81kg
(178 lb)
x 6 off
128kg
(282 lb)
x 6 off
L-971169
Tool
Trap
4 3/4-4x2
(3.750) Elmar
49kg
(108 lb)
76kg
(167 lb)
72kg
(158 lb)
85kg
(187 lb)
L-971404
Quick Test
Sub
4 3/4-4x2
(3.750) Elmar
35kg
(77 lb)
62kg
(136 lb)
65kg
(143 lb)
82kg
(180 lb)
L-974111
Dual L/W
Wireline Valve
4 3/4-4x2
(3.750) Elmar
114kg
(251 lb)
280kg
(617 lb)
337kg
(743 lb)
350kg
(772 lb)
L-972052
Pump-in
Sub
4 3/4-4x2
(3.750) Elmar
39kg
(86 lb)
59kg
(130 lb)
52kg
(114 lb)
76kg
(167 lb)
649kg
(1431 lb)
1127kg
(2485 lb)
1200kg
(2646 lb)
1581kg
(3486 lb)
Part
Number
Enviro Grease
Description
Connections
Enviro
Grease
Injection
Control Head
2-TPI
Acme Box
Tool Catcher/
Ball Check
Valve
L-971246
L-971444
Injection Control
Head
L-971167
Vent Valve
Ball Check Valve
Tool Catcher
Weight:
(5K H2S,
4 3/4-4
Bowen)
Weight:
(10K STD,
4 3/4-4
Bowen)
51kg
(112 lb)
80kg*
(176 lb)
80kg*
(176 lb)
6 1/8-4x2
(4.750) Elmar
49kg
(108 lb)
80kg
(176 lb)
80kg
(176 lb)
Lubricator
4ft long
6 1/8-4x2
(4.750) Elmar
44kg
(97 lb)
112kg
(246 lb)
138kg
(304 lb)
L-971846E
Lubricator
10ft long
6 1/8-4x2
(4.750) Elmar
88kg
(194lb)
x 6 off
174kg
(383 lb)
x 6 off
240kg
(528 lb)
x 6 off
L-972219
Tool
Trap
6 1/8-4x2
(4.750) Elmar
85kg
(187 lb)
127kg
(279 lb)
193kg
(425 lb)
L-972222
Quick Test
Sub
6 1/8-4x2
(4.750) Elmar
54kg
(119 lb)
168kg
(370 lb)
168kg
(370 lb)
655kg
(1444 lb)
670kg
(1474 lb)
670kg
(1474 lb)
57kg
(125 lb)
118kg
(260 lb)
118kg
(260 lb)
1523kg
(3357 lb)
2399kg
(5289 lb)
2887kg
(6365 lb)
Part
Number
Description
Connections
Enviro
Grease
Injection
Control Head
2-TPI
Acme Box
Tool Catcher/
Ball Check
Valve
L-971846A
Lubricator Sections
L-971444
L-972218
Tool Trap
Triple Hydraulic
6 1/8-4x2
L-972223 Wireline Valve (4.750) Elmar
Lightweight
Pump-in
Sub
6 1/8-4x2
(4.750) Elmar
Wireline Valve
*Note: Includes line wiper return hose (29kg/64 lb) which is not required with the Enviro
Pump-in
Sub
Wellhead Adapter
Flange
www.elmar.co.uk
21
4
PRESSURE CONTROL
EQUIPMENT
The Elmar Wellhead Adapter Flange provides a means of connecting the wireline valve and
lubricator assembly to the wellhead in a safe and secure manner.
The Elmar Wellhead Adapter Flange consists of a quick union machined on a standard API flange.
The upper end has a standard Bowen type, Otis type or Elmar quick union and can be supplied
with a blanking plug and collar if required.
Elmar wellhead adapter flanges are available in various bore sizes from 2 1/16" to 7 1/16" and
working pressure up to 15,000 psi.
Elmar will design and manufacture well-head adapter flanges for all API standard models. Elmar
adapter flanges are fully traceable and certified to API 6A.
Thread
Size
Seal Dia
Thread Per
Inch (TPI)
22
4
I.D.
Typical Elmar
Adapter Flange L-972237
API Ring
Groove
Number
Working
Pressure
3 1/16
BX-154
10,000 psi
H2S
3 1/16
BX-154
10,000 psi
H2S
Part
Number
Flange
Size
L-972237
L-975187
Service
Quick Union
Female Box
L-974529
4 1/16
R-39
5,000 psi
H2S
L-976006
4 1/16
BX-155
10,000 psi
H2S
L-972366
4 1/16
BX-155
10,000 psi
H2S
L-974533
5 1/2
R-44
5,000 psi
H2S
L-974775
7 1/16
R-46
5,000 psi
H2S
L-978774
3 1/16
BX-154
15,000 psi
H2S
L-979123
4 1/16
BX-155
15,000 psi
H2S
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
Pump-in Sub
The Pump-In Sub (PIS) is normally positioned below the Wireline Valve and above the Wellhead.
Its main function is to allow well control by pumping fluid below a closed Wireline Valve.
The PIS has quick unions top and bottom, and a WECO (Hammer Union) type side connection.
Pump-in Subs are normally supplied with a blind plug & nut on the WECO port. A suitable valve is
needed to operate the PIS, replacing the blind plug. Pump-in Subs can also be used for fluid
sampling or inhibitor injection. Specially designed Pump-in Subs, with different top and bottom
unions are used as wellhead adapter x-overs.
Pump-in Sub
Plug
Valve
Wellhead
Adapter
Flange
ACCESSORIES
Service
Connection
10,000 psi
H2S
2 1502
15,000 psi
H2S
2 2202
Part Number
Description
Working Pressure
L-840805
Plug Valve
L-840605
Plug Valve
PART NUMBERS
Part
Number
I.D.
Working
Pressure
Service
Connection
Side Outlet
L-972052
10,000 PSI
H2S
2 1502
L-979873
10,000 PSI
STD
2 1502
L-979098
10,000 PSI
H2S
2 1502
L-977282
10,000 PSI
H2S
2 1502
L-978771
15,000 PSI
H2S
2 2202
L-978110
10,000 PSI
H2S
2 1502
L-972224
4.06
10,000 PSI
H2S
2 1502
L-979733
4.5
15,000 PSI
H2S
2 2202
L-978891
5.5
5,000 PSI
H2S
2 1502
L-979264
6 3/8
10,000 PSI
H2S
2 1502
www.elmar.co.uk
23
4
PRESSURE CONTROL
EQUIPMENT
The Elmar Compact Wireline Valve is of mono-block construction and is designed for use in
either single, dual, triple or quad configurations.
The Valve gives positive protection during well service operations, when operating with slickline,
braided wireline and electric line. It is available in a full range of sizes and working pressures, from
2 1/2 to 6.70 bore sizes, and 5,000 psi to 15,000 psi working pressures. Additional sizes are
available on request.
All Elmar Compact Wireline Valves incorporate the following features as standard :-
PART NUMBERS
Part
Number
I.D.
Working
Pressure
Service
Single/Dual
Triple
Quick Union
Manifold
Block Type
L-979991
5,000 PSI
STD
Dual
L-980049
5,000 PSI
STD
Dual
L-979992
10,000 PSI
STD
Dual
L-980050
5,000 PSI
H2S
Dual
L-980051
5,000 PSI
H2S
Dual
L-980027
10,000 PSI
H2S
Triple
L-980052
10,000 PSI
H2S
Triple
L-979998
10,000 PSI
H2S
Dual
L-980253
10,000 PSI
H2S
Triple
L-972505
10,000 PSI
H2S
Single
L-972142
10,000 PSI
H2S
Dual
L-971402
10,000 PSI
H2S
Triple
H2S
Single
H2S
Dual
H2S
Triple
L-980053
10,000 PSI
H2S
Single
L-980054
10,000 PSI
H2S
Dual
STD
Dual
L-979731
H2S
Triple
L-980055
5 1/8
5,000 PSI
H2S
Dual
L-980056
H2S
Dual
L-980057
H2S
Triple
L-980058
6 3/8
5,000 PSI
H2S
Dual
H2S
Dual
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Lightweight Wireline Valve is available in 3 I.D., 10,000 psi working pressure, H2S
service, in either single, dual or triple configurations. (Soon to be available in 4, 5 and 6 3/8 I.D.)
The Elmar Lightweight Wireline Valve gives positive protection during well service operations,
when operating with slickline, braided wireline and electric line.
All Elmar Lightweight Wireline Valves are up to 60% lighter than previous generation Wireline
Valves and incorporate the following features as standard : Lightweight, allowing easier handling
3 Single 66kg, (146lb), Dual 114kg, (251lb)
and Triple 162kg, (357lb)
Compact size, allowing shorter rig-up heights
Back-up manual closure
Threaded quick unions, allowing the use of any
Bowen type or Otis type union without changing
the body
Ram position indicator rods
Manifold blocks with integral equalisation, glycol
and grease injection facilities
Maximum working pressure 10,000 psi H2S service
Maximum hydraulic working pressure 3,000 psi
API 6A and NACE compliant
Third Party Design Approval
wireline sizes
PART NUMBERS
Lightweight
Slickline
Stuffing Box
Part
Number
I.D.
Working
Pressure
Service
Single/Dual
Triple
Quick Union
L-974111
10,000 PSI
H2S
Single
L-974223
10,000 PSI
H2S
Dual
L-974224
10,000 PSI
H2S
Triple
MANIFOLDS
Grease/Glycol Injection
and Equalistion
Equalisation Valve
Lightweight
Lubricator
Section
Bleed Off
Glycol
Injection
3 Lightweight
Grease
Injection
Wireline Valve
Equalisation Valve
www.elmar.co.uk
Gauge Port
Manual
Handle
Stored
25
4
PRESSURE CONTROL
EQUIPMENT
The Elmar Quick Test Sub (QTS) is designed to save rig time while pressure testing the Wireline
Pressure Control Equipment String when multiple wireline runs are required.
The Elmar Quick Test Sub is inserted either above or below the wireline valve at the position of the
joint normally opened to insert and retrieve tools from the well. After performing the first pressure
test to check the integrity of the whole String, subsequent pressure tests can be made using the
Quick Test Sub to verify the integrity of the joint disconnected, rather than having to test the whole
assembly. This is achieved by connecting a small hydraulic hand-pump to the Quick Test Sub and
testing the joint O ring seal from the outside. It is estimated that the use of the Elmar Quick Test
Sub can reduce the time needed to pressure test the String at each subsequent test by more than
1/2 hour.
26
4
PART NUMBERS
Part
Number
I.D.
Working
Pressure
L-971404
L-972235
L-970918
L-971299
Service
Connections
Seal Kit
10,000 psi
H2S
L-971404K
10,000 psi
H2S
L-972235K
10,000 psi
H2S
L-970918K
10,000 psi
H2S
L-971299K
L-972222
4.06
10,000 psi
H2S
L-972222K
L-973101
5.125
10,000 psi
H2S
L-973101K
Part Number
L-690573
Description
L-690587
25ft
L-690586
50ft
Hose Assembly
6mm ID, 10,000psi Hose
with Quick Connectors
and Dust Covers
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Hydraulic Tool Trap with external indicator is installed between the Wireline Valve and
the lubricator string. It prevents the loss of wireline tools downhole in the event of the wire being
pulled-off the rope socket, by retaining the dropping tool on a flapper. The flapper has an opening
larger than the wireline, but smaller than the tool string.
The flapper is operated by a hydraulic actuator, through an external handle, connected to the
flapper with a low-torque pressure-balanced shaft. The external handle doubles as a tool passage
indicator. The tool string may be pulled freely upwards through the tool trap. The flapper will move
upwards, together with the external handle, indicating tool passage. As soon as the string bottom
has cleared the flapper, the flapper will drop back into the trap position, pushed by a torsion spring.
The flapper can be lifted remotely when running a tool in the well by activating the piston in the
hydraulic actuator. Pumping back the piston to its original position allows the flapper to return to its
trap position.
The hydraulic actuator can be operated by a dual output manual pump or with an Elmar Hydraulic
Control Module.
Hydraulic
Actuator
Lightweight: L-971169
Positive tool passage indicator
Pressure-balanced flapper shaft
Remote hydraulic operation. Enhanced
operational safety
Can be operated manually in case of hydraulic
failure
Option:
Manual Tool Trap with external indicator
CROSS SECTION DETAIL
Flapper
Handle
ACCESSORIES
Part Number
PART NUMBERS
Part Number
I.D.
Working Pressure
Service
Quick Union
L-974814
2 1/2
15,000 psi
H2S
L-976271
2 1/2
10,000 psi
H2S
L-971169
10,000 psi
H2S
L-978383
5,000 psi
H2S
L-974828
10,000 psi
H2S
L-974794
10,000 psi
H2S
L-972219
4 1/16
10,000 psi
H2S
L-978441
5 1/2
5,000 psi
STD
Description
L-690750
L-690615
www.elmar.co.uk
27
4
PRESSURE CONTROL
EQUIPMENT
The SSR Integral Lubricator Section is a pressure containing cylinder used when performing
wireline operations. Its purpose is to allow the Wireline Tool String to be raised above the wellhead
prior to and after wireline operations, thereby enabling the wellhead valve to be opened and closed,
allowing entry and exit from the well bore. During slickline operations, three Lubricator Sections are
normally used, each having a different ID, the uppermost section having the smallest, then
opening out to the lower section with largest ID. During electric line operations the lubricators
normally have the same ID.
Unions
5 1/2" - 4x2 'BB'
5,000psi
10,000psi
10,000psi
Length
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
Assembly Number
A014-123
A014-137
A014-098
A014-138
A014-100
A014-139
A014-116
A014-140
Length
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
Assembly Number
A016-059
A016-089
A016-067
A016-076
A016-060
A016-090
A016-091
A016-097
Unions
7" - 5THD 'BB'
5,000psi
10,000psi
10,000psi
SPECIFICATIONS
28
4
Pressure Rating
Service
Up to 15,000psi
H2S and Standard Service
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The SSR Lubricator Section is used when performing wireline or electric line operations with 1/2
NPT Bleed Port Fitted. Quick Unions are of the screwed type with a SSR ACME thread, which
incorporates primary O Ring Seal with metal back-up. Det Norske Veritas and Lloyds Design type
approval is available if required.
Unions
4 3/4" - 4THD BB
5,000psi
10,000psi
10,000psi
Length
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
Assembly Number
A012-002
A012-003
A012-043
A012-044
A012-006
A012-007
A012-008
A012-009
Length
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
Assembly Number
A014-014
A014-015
A014-092
A014-011
A014-009
A014-003
A014-019
A014-021
Length
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
Assembly Number
A016-004
A016-002
A016-006
A016-007
A016-008
A016-026
A016-009
A016-010
Unions
5 1/2" - 4x2 'BB'
5,000psi
10,000psi
10,000psi
Unions
7" - 5THD 'BB'
5,000psi
10,000psi
10,000psi
Unions
8 1/2" - 4x2 'BB'
(6.750") Seal Dia.
8 1/4" - 4THD 'OO'
10,000psi
10,000psi
Length
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
Assembly Number
A018-009
A018-010
A018-055
A018-114
A018-115
A018-001
A018-013
A018-002
Length
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
8ft.
10ft.
Assembly Number
A020-005
A020-006
A020-007
A020-008
A020-116
A020-117
A020-011
A020-012
Unions
9 7/8" - 4x2 'BB'
5,000psi
10,000psi
10,000psi
SPECIFICATIONS
Pressure Rating
Service
Up to 15,000psi
H2S and Standard Service
www.elmar.co.uk
29
4
PRESSURE CONTROL
EQUIPMENT
Bleed-Off Sub
For applications when a bleed-off port is required on the lubricator string , subs are available with
a 1/2" NPT Port for connection of a suitable valve.
ELMAR
Slickline
Head
Lubricator Sections
30
4
Bleed-Off Sub
PART NUMBERS
I.D.
Working
Pressure
Service
Quick Union
Bleed
Port
L-974292
10,000 psi
H2S
1/2 NPT
L-974293
4 1/16
10,000 psi
H2S
1/2 NPT
L-970915
10,000 psi
STD
1/2 NPT
L-970916
10,000 psi
H2S
Part
Number
ACCESSORIES
Part Number
Description
L-500060
Pump-in
Sub
Wellhead Adapter
Flange
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
Lightweight Lubricator
The Elmar "Lite" lubricators enable the wireline tool string to be introduced or retrieved from a well
bore under pressure. They are normally positioned above the Wireline Valve, Tool Trap or Quick
Test Sub. By using high strength Stainless Steel Alloys, the weight of a lubricator section is reduced
by up to 70% with respect to conventional integral lubricators.
The Elmar "Lite" lubricator consists of four basic parts: a quick union collar, a male quick union, a
lubricator tube, and a female quick union. The quick unions are manufactured in H2S resistant alloy
steel to prevent galling.
Elmar "Lite" lubricators are supplied with a 3" or 4 1/16" bore, and are rated 10,000 psi H2S
service. The Elmar Lightweight quick unions have been selected for optimum weight reduction and
to prevent unsafe cross-string assembly. Upper and lower adapters are available to connect
existing equipment. These are rated 5,000 psi or 10,000 psi depending on the type of connection.
Corrosion Resistant Tube made from high
strength NACE Certified Stainless Steel
Quick unions are coupled through Premium
Elmar Lite Coupling:
- Tube-to-union seal is metal-to-metal
backed-up by O-Ring
- Special handling tools supplied. Calibrated
torque is not required.
Bending stresses at the thread undercut are
minimised.
31
4
3 Torque Tool
L-973958
Upper
Connections
Lower
Connections
I.D.
W.P.
Service
L.
W.
L-971246
4 3/4-4x2 (3.750)
Elmar Box
4 3/4-4x2 (3.750)
Elmar Pin
10K
H2S
4ft
54 lb
L-971247
4 3/4-4x2 (3.750)
Elmar Box
4 3/4-4x2 (3.750)
Elmar Pin
10K
H2S
5ft
63 lb
L-971248
4 3/4-4x2 (3.750)
Elmar Box
4 3/4-4x2 (3.750)
Elmar Pin
10K
H2S
6ft
72 lb
L-971249
4 3/4-4x2 (3.750)
Elmar Box
4 3/4-4x2 (3.750)
Elmar Pin
10K
H2S
8ft
90 lb
L-971251
4 3/4-4x2 (3.750)
Elmar Box
4 3/4-4x2 (3.750)
Elmar Pin
10K
H2S
10ft
108 lb
Buttress Type
Thread
Up to
70%
lighter
Upper
Connections
Lower
Connections
I.D.
W.P.
Service
L.
W.
L-971846A
6 1/8-4x2 (4.750)
Elmar Box
6 1/8-4x2 (4.750)
Elmar Pin
4.06
10K
H2S
4ft
96 lb
L-971846B
6 1/8-4x2 (4.750)
Elmar Box
6 1/8-4x2 (4.750)
Elmar Pin
4.06
10K
H2S
5ft
113 lb
6 1/8-4x2 (4.750)
L-971846C
Elmar Box
6 1/8-4x2 (4.750)
Elmar Pin
4.06
10K
H2S
6ft
129 lb
6 1/8-4x2 (4.750)
L-971846D
Elmar Box
6 1/8-4x2 (4.750)
Elmar Pin
4.06
10K
H2S
8ft
161 lb
6 1/8-4x2 (4.750)
Elmar Box
6 1/8-4x2 (4.750)
Elmar Pin
4.06
10K
H2S
10ft
193 lb
L-971846E
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Chemical Injection Sub is designed to apply a de-icing agent or corrosion inhibitor to the
wireline during well service operations.
Installed below the grease injection control head or slickline stuffing box, the Elmar chemical
injection sub utilises replaceable felt packings to coat the wireline and prevent the chemical from
passing downhole.
The Elmar chemical injection sub consists of a one piece body with integral quick unions on both
ends, a quick union collar assembly, a manifold injection block assembly with integral check valve
and a felt packing retainer assembly. The check valve assembly is designed for easy and quick
replacement.
Elmar chemical injection subs are available in a full range of wire sizes, and 5,000 psi to 15,000 psi
working pressures.
32
4
Check Valve
Assembly
Lightweight: L-972901/L-972877
One piece body with integral quick unions
Integral check valve
Available to suit all wire sizes
Other sizes available upon request
PART NUMBERS
Part Number Wire Size
Working Pressure
Service
Quick Union
10,000 psi
H2S
L-972901
.125
L-976217
.125
5,000 psi
H2S
L-978641
.125
10,000 psi
H2S
L-972877
.125
10,000 psi
H2S
L-978049
.125
10,000 psi
H2S
L-972683
.125
10,000 psi
H2S
L-970273
7/32
5,000 psi
H2S
L-976595
7/32
10,000 psi
STD
L-974664
7/32
15,000 psi
H2S
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Hydraulic Tool Catcher is a safety device for installation below the Grease Injection Head
or Slick Line Stuffing Box. If the tool is pulled into the top of the lubricator and the wire stripped from
the rope socket, the Tool Catcher will engage the tool's fishing neck and prevent the loss of the tool
string into the well bore. The Tool Catcher is designed to be fail-safe: it is permanently in the catch
position and requires hydraulic pressure to release.
Elmar Hydraulic Tool Catchers for electric line are normally supplied with an integral ball check
valve assembly, and a top connection into which a grease head can be directly screwed.
For slick line operations Elmar Hydraulic Tool Catchers are available with quick unions top and
bottom.
Elmar Hydraulic Tool Catchers are available with ratings from 5,000 psi to 15,000 psi WP, STD and
H2S Service. Collet sizes vary from 1" to 1 3/4" fishing necks. Multi-catch options are available in
two ranges: 1" to 1 3/4" and 1 3/16" to 2 5/16".
PART NUMBERS
Ball Check
Part
Number
Collet
Size
Working
Pressure Service
Quick Union
Male Pin
L-971167
1 3/16
10,000 psi
H2S
4 3/4-4x2
(3.750) Elmar
L-974439
1 3/16
10,000 psi
STD
4 3/4-4thd
(3.750) Bowen
L-974440
1 3/16
10,000 psi
STD
4 3/4-4thd
(3.750) Bowen
L-972218
1 3/16
10,000 psi
H2S
6 1/8-4x2
(4.750) Elmar
L-974569
1 3/16
15,000 psi
H2S
6 5/16-4thd
(3.750) Bowen
Valve
L-974661
1 3/16
10,000 psi
H2S
6 5/16-4thd
(4.375) Bowen
L-974715
1 3/16
10,000 psi
H2S
8 1/4-4x2
(6.000) Bowen
L-974816
1 3/8
10,000 psi
H2S
5 3/4-4thd
(4.000) Otis
L-974919
1 3/16
5,000 psi
H2S
4 3/4-4thd
(3.750) Bowen
L-974997
1 3/16
5,000 psi
H2S
4 3/4-4thd
(3.750) Bowen
H2S
5 3/4-4thd
(4.000) Otis
L-975268
Hydraulic
Tool Catcher
1 3/16
10,000 psi
L-975279
1 3/16
10,000 psi
H2S
6 5/16-4thd
(4.375) Bowen
L-975719
1 3/16
10,000 psi
H2S
8 1/4-4x2
(6.000) Bowen
L-975846
1 3/16
5,000 psi
STD
5-4thd
(3.500) Otis
L-976010
1 3/8
10,000 psi
H2S
8 1/4-4x2
(6.000) Bowen
L-976157
1 3/16
10,000 psi
H2S
6 5/16-4thd
(4.375) Bowen
6 5/16-4thd
(4.375) Bowen
L-976245
1 3/8
10,000 psi
H2S
6 5/16-4thd
(4.375) Bowen
L-690730
Description
Description
L-690760
50ft
L-690740
100ft
Hose Assembly
1/4 ID 100 R2AT Hose with
1/4 NPT Male Hose Ends
and Snaptite Male and Female Connectors
Top Connection
www.elmar.co.uk
33
4
PRESSURE CONTROL
EQUIPMENT
The Elmar Quick-Interchange Tool Catcher allows the field crew to quickly and easily change
between slickline and electric line operations without remaking either rope socket.
Stuffing Box
Enviro
Line Wiper
Slickline Stuffing
Box & Blowout Plug
Grease Head
34
4
BCV with
QUICK-INTERCHANGE TOOL CATCHER SYSTEM
Elmar Quick
Union
Part Number
Electric Line
Cable Head
Description
L-979540
L-979184
L-971444
Cable Head
Slickline
Cable Head
Protector
Sleeve
L-972019
Ball Check Valve 10,000 psi, H2S, with 3 3/4-5thd (2.500) Elmar male
pin and collar
L-975279
Combination Tool Catcher and Ball Check Valve, 10,000 psi, H2S, with
6 5/16-4thd (3.750) Bowen male pin and collar - fish neck size to be
specified
L-978707
Combination Tool Catcher and Ball Check Valve, 10,000 psi, H2S, with
6 1/2-4thd (3.750) Otis male pin and collar - fish neck size to be
Split Tool
specified
L-971167
Stop
Combination Tool Catcher and Ball Check Valve, 10,000 psi, H2S, with
4 3/4-4x2 (3.750) Elmar male pin and collar - fish neck size to be
specified
Handling Sub
Elmar Quick
Union
Tool Catcher
L-971174
L-972027
Similar equipment is available for alternative flotube types, quick union sizes, working pressures and
services.
A Split Tool Stop is available for modification of many types of existing Elmar Combination Tool Catchers
with Ball Check Valve so as to up-grade to the Quick-Interchange feature.
Please ask for details.
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Grease Injection Control Head is designed to create a seal around a moving wireline,
allowing intervention access to wells under pressure.
Positioned at the uppermost point of the pressure control
equipment string, the Elmar Grease Injection Control Head
comprises two major sub-assemblies, the stuffing box or
pack-off and the flotube assembly.
Gland (1)
Line Rubber (1)
Interlocking
Seat (1)
Flotube
Injection Check
Valve
Additional
Flotube
and Injection
Coupling
Assembly
L-971218
Note: Parts included in line size kit (1). Seal Kit (O-Ring and BURs) does not include line size kit.
Bottom
Connection
Top
Connection
Seal
Kit
L-979470
10,000 psi
H2S
2-10TPI
Acme Pin
2 Line
Pipe Pin
L-979470K
L-978385
10,000 psi
H2S
2-10TPI
Acme Pin
2 Line
Pipe Pin
L-978385K
L-970635
10,000 psi
H2S
2-10TPI
Acme Pin
2 Line
Pipe Pin
L-970635K
2 Line
Pipe Pin
L-971229K
2-10TPI
Acme Box
L-971218K
L-971229
10,000 psi
H2S
2-10TPI
Acme Pin
L-971218
10,000 psi
H2S
2-10TPI
Acme Pin
TEST FIXTURE
L-972410
L-971281
Test Rod Assembly for Stuffing Box, 3/16 - 15/32 Line Range
L-972264
www.elmar.co.uk
35
4
PRESSURE CONTROL
EQUIPMENT
Gland (1)
*Line Size
Code
Line
Size
Gland (1)
Line
Rubber (1)
Inter-locking
Seat (1)
Flotube
ID
Flotube
3/16
0.188
(1-18)
L-971840
L-972200
L-972240
.177
.183
.186
.189
.193
L-976184
L-974570
L-972380
L-974571
L-972250
.196
.199
.201
.204
.208
.211
.216
.219
.222
.224
.226
.228
.231
.232
.236
.239
.240
.243
.248
L-976696
L-976650
L-976163
L-977167
L-975439
L-975440
L-974572
L-974538
L-971129
L-972370
L-972680
L-978002
L-977887
L-977899
L-971130
L-977315
L-974573
L-972868
L-974507
L-972869
L-972871
L-973449
L-973571
L-973572
-
Flotube
36
4
L-972150
L-972200
1/4
0.250
L-972160
L-972200
L-972260
.254
.256
.258
.260
.261
.262
.264
.267
9/32
0.281
L-971232
L-978180
L-978181
.287
.295
.298
.306
L-978175
L-971312
L-971436
L-979643
L-976938
L-976538
L-976539
L-976258
L-976605
L-973937
L-976606
L-973234
L-976607
L-980217
5/16
0.312
(1-32)
L-972170
L-972210
L-972270
.312
.315
.316
.321
.326
.329
.332
.335
.337
.341
3/8
0.375
L-972180
L-972220
L-972280
.366
.373
.376
.384
L-970429
L-978176
.399
.404
.411
.416
.423
.425
.427
.433
.436
L-970946
L-970571
L-970572
L-970573
L-970106
L-971639
.467
.472
.477
L-972906
L-979388
L-979088
Injection Check
Valve
7/32
0.219
(1-20)
(1-22)
(2-23)
7/16
0.438
(7-42)
L-972190
L-972230
L-972290
15/32
0.469
(7-46)
L-976291
L-976295
L-976292
Additional
Flotube
and Injection
Coupling
Assembly
L-971218
Wire Size
L-831210
3/16 wire
L-831200
7/32 wire
L-831220
5/16 wire
Note: Parts included in line size kit (1). Seal Kit (O-Ring and BURs) does not include line size kit.
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Enviro Grease Injection Control Head is designed to create a seal around a moving
wireline, allowing intervention access to wells under pressure.
Spacer (1)
Packing (1)
Lower Gland (1)
Flotube
Injection Check
Valve
Additional
Flotube
and Injection
Coupling
Assembly
L-971218
Note: Parts included in line size kit (1). Seal Kit (O-Ring and BURs) does not include line size kit.
L-971443
10,000 psi
Bottom
Connection
Top
Connection
Seal
Kit
H2S
2-10TPI
Acme Pin
Wire Tulip
Guide
L-971443K
Wire Tulip
Guide
L-971444K
L-971444
10,000 psi
H2S
2-10TPI
Acme Pin
L-971445
10,000 psi
H2S
2-10TPI
Acme Pin
Wire Tulip
Guide
L-971445K
Wire Tulip
Guide
L-971446K
2-10TPI
Acme Box
L-971218K
L-971446
10,000 psi
H2S
2-10TPI
Acme Pin
L-971218
10,000 psi
H2S
2-10TPI
Acme Pin
TEST FIXTURE
L-972201
L-972241
L-972264
www.elmar.co.uk
37
4
PRESSURE CONTROL
EQUIPMENT
Line
Size
Stuffing Box
Packing
Line Wiper
Rubber
Flotube
ID
Flotube
3/16
0.188
(1-18)
L-870232
L-831140
.177
.183
.186
.189
.193
L-976184
L-974570
L-972380
L-974571
L-831150
.196
.199
.201
.204
.208
.211
.216
.219
.222
.224
.226
.228
.231
.232
.236
.239
.240
.243
.248
L-976696
L-976650
L-976163
L-977167
L-975439
L-975440
L-974572
L-974538
L-971129
L-972370
L-972680
L-978002
L-977887
L-977899
L-971130
L-977315
L-974573
L-972868
L-974507
L-972869
L-972871
L-973449
L-973571
L-973572
-
Spacer (1)
Packing (1)
Lower Gland (1)
7/32
0.219
(1-20)
(1-22)
(2-23)
L-972200
1/4
0.250
L-972200
L-831150
.254
.256
.258
.260
.261
.262
.264
.267
9/32
0.281
L-978180
L-831006
.287
.295
.298
.306
L-978175
L-971312
L-971436
L-979643
L-976938
L-976538
L-976539
L-976258
L-976605
L-973937
L-976606
L-973234
L-976607
L-980217
Flotube
5/16
0.312
(1-32)
L-972210
L-831130
.312
.315
.316
.321
.326
.329
.332
.335
.337
.341
3/8
0.375
L-972220
L-831005
.366
.373
.376
.384
L-970429
L-978176
.399
.404
.411
.416
.423
.425
.427
.433
.436
L-970946
L-970571
L-970572
L-970573
L-970106
L-971639
.467
.472
.477
L-972906
L-979388
L-979088
38
4
Injection Check
Valve
Additional
Flotube
and Injection
Coupling
Assembly
L-971218
7/16
0.438
(7-42)
L-972230
L-830056
15/32
0.469
(7-46)
L-976295
L-831270
Note: Parts included in line size kit (1). Seal Kit (O-Ring and BURs) does not include line size kit.
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
Enviro Combination
Stuffing Box and Line Wiper
The Elmar Enviro Combination Stuffing Box and Line Wiper is designed for use with wireline
grease injection control heads, for wiping excess grease from the moving wire and for packing off
on a stationary wire. This new design improves the wiping action and reduces grease spillage.
Due to the unique reverse design, the line wiping efficiency is increased resulting in cleaner wire,
less grease escaping from top of tool and a cleaner worksite/derrick.
The Enviro Stuffing Box and Line Wiper can be dressed for use with braided wire from 0.188 to
0.520 diameter and can be supplied for use with concentric (2-10TPI) or solid (2-6-60)
type flotubes.
Upper
Bush (3)
Upper
Gland (3)
Pack-Off
Overall
Length
32.3
Rubber (3)
PART NUMBERS
Part
Number
Working
Pressure
Service
Bottom Connection
Seal Kit
L-980331
10,000 psi
H2S
L-980331K
L-972039
10,000 psi
H2S
Intermediate
Bushing (3)
Note: 1. Wire size to be specified when ordering 2. Seal Kits comprise O-Rings and BURs only
3. Line Size Kit
Max O.D. 4
Wiper
Packing
Element (3)
Lower
Bushing (3)
Grease
Return
Manifold
www.elmar.co.uk
39
4
Enviro Single
Compact Pack-Off
PRESSURE CONTROL
EQUIPMENT
The Elmar Enviro Single Hydraulic Compact Pack-Off is designed to wipe clean moving cable
under pressure.
Positioned above the tubing/casing, the Enviro Single Compact Pack-Off is built around the wire
before the wireline tool is lowered into the well.
The Enviro Single Compact Pack-Off works by squeezing a rubber element which is wrapped
around the wire. This element effectively seals against well pressure, as well as wiping the wire free
of fluid.
The Enviro Single Compact Pack-Off is designed so that the rubber element in direct contact
with the wire is easily replaced.
The Enviro Single Compact Pack-Off is rated to 5,000 psi working pressure (static wireline) and
H2S service and is available with full material traceability and Third Party Certification.
A 0-3000 psi hand pump and hose is required to operate the Enviro Single Compact Pack-Off.
SPARE PARTS
40
4
Upper
Bushing
Packing
Wire Size
Upper Bush
Packing
Lower Bush
3/16
L-831250
L-831140
L-831260
7/32
L-831070
L-831150
L-831080
5/16
L-831170
L-831130
L-831190
1/2
L-831280
L-831120
L-831290
9/16
L-831160
L-831120
L-831180
L-974823
L-978423
L-975102
L-690730
Hand Pump
L-691080
L-690760
Lower
Bushing
PART NUMBERS
Part
Number
Working
Pressure
Service
L-972872
5,000 psi
H2S
L-973105
5,000 psi
H2S
Bottom Connection
Seal Kit
L-973105K
Height
Weight
1.74
26 in (66 cm)
75lbs (34kg)
www.elmar.co.uk
Enviro Dual
Compact Pack-Off
PRESSURE CONTROL
EQUIPMENT
The Elmar Enviro Dual Hydraulic Compact Pack-Off is designed to wipe clean moving cable
under pressure.
Positioned above the tubing/casing, the Enviro Dual Compact Pack-Off is built around the wire
before the wireline tool is lowered into the well.
The Enviro Dual Compact Pack-Off works by squeezing each of the two independent rubber
elements which are wrapped around the wire. Each element seals on the cable outer armour
against well pressure, as well as wiping the wire free of fluid.
The Pack-Off is designed so that the rubber element in direct contact with the wire is easily
replaced.
(2) 0-3000 psi hand pumps and hoses are required to operate the Dual Pack-Off.
Upper Bush
Packing
Lower Bush
3/16
L-831250
L-831140
L-831260
7/32
L-831070
L-831150
L-831080
5/16
L-831170
L-831130
L-831190
1/2
L-831280
L-831120
L-831290
9/16
L-831160
L-831120
L-831180
Upper
Pack-Off
Minimum I.D.
1.74
L-979575
L-974823
L-978423
L-975102
L-690730
Hand Pump
L-651192
L-652774
41
4
PART NUMBERS
Lower
Pack-Off
Part
Number
Working
Pressure
Service
L-970338
5,000 psi
H2S
Bottom Connection
Seal Kit
L-973711
5,000 psi
H2S
L-973711K
L-973663
5,000 psi
H2S
L-973663K
Height
Weight
1.74
41 in (104 cm)
99lbs (45kg)
www.elmar.co.uk
TRANSPORT RACKS
Slickline
Transport Baskets
SSR manufacture a range of transport baskets for slickline pressure control equipment.
The baskets can be manufactured to various standards, BE 7072, BSEN 12079, DNV 2.7-1 etc.
The baskets range from simple lubricator transportation units to full slickline rig up equipment to
include Wireline Valves, Lubricators, Stuffing Box, Crossovers, Hay Pulleys, Hand Pumps and
Hoses. The units on this page are an example of the range of equipment available.
MLA2-009
Lubricator transportation frame assembly manufactured
to BSEN12079 specification with four point lift and
forklift pockets in the base.
MLA3-Series
Lubricator and Wireline Valve transportation frame assembly manufactured to BS 7072 specification with solid sides,
four point lift and forklift pockets in the base.
42
4
MLA3-013
Lubricator and Wireline Valve transportation frame assembly
manufactured to BS 7072 specification with open sides, four
point lift and forklift pockets in the base.
Containing the following equipment:
2 x 4" ID x 8 Ft Lubricators
2 x 3" ID x 8 Ft Lubricators
1 x Stuffing Box c/w 16" Sheave
and Bracket
1 x 4" ID Single Hydraulic Wireline Valve
1 x 4" to 3" Crossover
The unit contains a tool box for hand pumps and hoses and
the equipment is held in place by scallops and secured by (3)
off ratchet strops.
www.elmar.co.uk
TRANSPORT RACKS
This system consists of the 5 Series control module, transport frame and a full set of 2 1/2 I.D. or
3 I.D. pressure control equipment.
Weight
pounds
kilos
1,760
800
43
4
DIMENSIONS
inches
centimetres
L 148
L 375
W 48
W 121
H 70
H 178
L-696950 5 Series
2-BOP Grease and
Hydraulic Control
Module
www.elmar.co.uk
TRANSPORT RACKS
This system consists of the 10 Series control module, transport frame and a full set of 2 1/2", 3 or
4" I.D. pressure control equipment.
WEIGHTS
Weight
44
4
pounds
kilos
2,552
1,160
DIMENSIONS
inches
centimetres
L 161
L 408
W 53
W 135
H 80
H 203
L-697200 10 Series
3-BOP Grease and
Hydraulic Control
Module
www.elmar.co.uk
TRANSPORT RACKS
This system consists of the 5 Series E-Lite control module and a full set of lightweight 3 or 4 1/16
I.D. pressure control equipment.
WEIGHTS
Weight
pounds
kilos
2,646
1,200
DIMENSIONS
inches
centimetres
L 138
L 351
W 51
W 130
H 67
H 171
L-690597 5 Series
E-Lite 3-BOP
Grease and Hydraulic
Control Module
www.elmar.co.uk
45
4
TRANSPORT RACKS
This system consists of the 15 Series grease and hydraulic control modules, transport frame and a
full set of 2 1/2 I.D. or 3 I.D. pressure control equipment.
WEIGHTS
Weight
pounds
kilos
3,748
1,700
DIMENSIONS
46
4
inches
centimetres
L 157
L 398
W 62
W 157
H 74
H 189
L-697830 15 Series
3-BOP Hydraulic
Control Module
Triple BOP
Hydraulic Control Module L-697830
Grease Control Module L-695740
Grease Head
Tool Trap
Tool Catcher
Crossover
Accessories
L-695740 15 Series
Grease Control
Module
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
Elmar manufacture a manually operated single wireline valve with a 5 1/2" ID and a safe working
pressure of 5,000 psi for open hole logging. This along with a hydraulic line wiper and stuffing box
L-971780 gives protection against pressure in open hole situations.
The manually operated wireline valve can only be mechanically opened and closed by turning
handles that are connected to a threaded shaft which screws into the body of the wireline valve.
At the end of the shaft is a plate that locks into the back of the ram body and pushes and pulls the
ram depending on the direction you turn the handles.
Single manual ram wireline valves are to be found in service with working pressure ratings up to
5,000 psi, and have an ACME threaded body with O-ring seal.
Hydraulic
Pack-Off
(HLWB)
Manual Heavy
Duty Wireline
Valve
Wire
Size
L-971780
H2S
L-973845
STD
L-970059
I.D.
Working
Pressure
Service
Quick Union
L-971770
5 1/2
5,000 PSI
H2S
L-970058
5 1/2
5,000 PSI
L-973844
5 1/2
5,000 PSI
Part
Number
Working
Pressure
Service
15/32
5,000 psi
H2S
15/32
5,000 psi
STD
15/32
5,000 psi
H2S
Bottom Connection
www.elmar.co.uk
47
4
PRESSURE CONTROL
EQUIPMENT
The Elmar Hydraulic Wireline Annular Valve is designed to seal on a moving cable under pressure.
It is meant to be used for Safety while Logging applications and for Perforating with large guns.
Positioned above the drilling BOP, or a shooting nipple, it offers, once rigged up, a clean bore of
6 to 6 1/2 (depending on connection type) to run a tool through. The cable and rope socket are
initially threaded through the top section and connected to the head. Several elements are split or
slotted for ease of assembly. In subsequent runs the top section is lifted with the logging head and
remains around the cable while tools are laid down.
The Elmar Hydraulic Wireline Annular Valve seals by
squeezing a split rubber element which is wrapped around the
wire. This element seals on the cable outer armour against
well pressure, as well as wiping the wire free of fluid.
It is designed so that the rubber element which is in direct
contact with the wire can be easily replaced.
An Air Cleaner is integral to the unit.
A Hydraulic hand pump is required to operate the pack-off.
ELMAR HYDRAULIC WIRELINE ANNULAR VALVE ASSEMBLY
48
4
Quick Union
L-690730
Description
L-691080
25ft
L-690760
50ft
L-690740
100ft
Minimum
Hose Assembly
1/4 ID 100 R2AT Hose with
1/4 NPT Male Hose Ends
and Snaptite Male and Female Connectors
I.D. 2.40
L-690541
Quick Union
Passage 1 3/4
Description
*I.D. 6 to 6 1/2
L-970989
L-971719
L-970835
L-970838
Overshot
Logging
SPARES
Head
L-971618K
Service Kit
L-971619K
Service Kit
L-973746K
Service Kit
L-831270
Packing 15/32
PART NUMBERS
Part Number Wire Size
Working
Pressure
Service
Lower Connection
I.D.
L-971618
0.46-0.52
3,000 psi
STD
L-971619
0.46-0.52
3,000 psi
STD
L-973746
0.46-0.52
3,000 psi
STD
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Dual Hydraulic Wireline Annular Valve is designed to seal on a moving cable under
pressure. It is meant to be used for Safety while Logging applications and for Perforating with
large guns.
Positioned above the drilling BOP, or a shooting nipple, it offers, once rigged up, a clean bore of
6 to 6 1/2 (depending on connection type) to run a tool through. The cable and rope socket are
initially threaded through the upper and middle sections and connected to the head. Several elements are split or slotted for ease of assembly. In subsequent runs the upper and middle
sections are lifted with the logging head and remains around the cable while tools are laid down.
The Elmar Dual Hydraulic Wireline Annular Valve seals by
squeezing a split rubber element which is wrapped around the
wire. This element seals on the cable outer armour against
well pressure, as well as wiping the wire free of fluid.
It is designed so that the rubber element which is in direct
contact with the wire can be easily replaced.
An Air Cleaner is integral to the unit.
A Hydraulic hand pump is required to operate the pack-off.
ELMAR HYDRAULIC WIRELINE ANNULAR VALVE ASSEMBLY
49
4
Upper Section
STUFFING BOX OR PACK-OFF HAND PUMP (STEEL)
Part Number
Quick Union
L-690730 x (2)
Description
L-691080 x (2)
25ft
L-690760 x (2)
50ft
L-690740 x (2)
100ft
Hose Assembly
1/4 ID 100 R2AT Hose with
1/4 NPT Male Hose Ends
and Snaptite Male and Female Connectors
Middle Section
Minimum
Quick Union
Passage 1 3/4
I.D. 2.40
L-690541
Description
*I.D. 6 to 6 1/2
Overshot
Lower Section
PRESSURE TEST ACCESSORIES
L-970989
L-971719
L-970835
L-970838
Logging
Head
* Depending upon bottom connection
Note: Other line sizes available on request.
SPARES
L-970483K
Service Kit
L-831270
Packing 15/32
PART NUMBERS
Part Number Wire Size
L-970483
0.46-0.52
Working Pressure
Service
Lower Connection
3,000 psi
H2S
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Dual Hydraulic Annular Wireline Valve (M3000) is a two piece tool which is designed to
seal on a moving cable under pressure and which if necessary allows the introduction of extra
lubricator sections to the wireline rig-up if the operating conditions necessitate this step. It is to be
used for Safety While Logging applications, perforating with large guns and other similar wireline
intervention work.
Positioned above the drilling BOP, or a shooting nipple, the
M3000 Lower Assembly comprises a lower body and a lower
packing assembly which can be easily disassembled for ease
of rig-up. The M3000 Lower Assembly offers a through bore of
6 1/2 ID maximum (depending on connection type). Several
elements of the lower packing assembly are either slotted or
split in order that the cable head with rope socket can remain
intact.
Upper Assembly
Tulip Wire
Lower Assembly
Guide
Air Cleaner
Lock-Down
Lower
Screws
Packing
Assembly
Pump-in/
50
4
Equalisation
Port
Lower Body
Overshot
Part Number
L-690730
Description
25ft
L-690760
50ft
L-690740
100ft
Hose Assembly
1/4 ID 100 R2AT Hose with
1/4 NPT Male Hose Ends
and Snaptite Male and Female Connectors
L-690541
Description
L-970838
PART NUMBERS
Description
Part
Number
Wire
Size
Working
Pressure
Service
Bottom Connection
Upper Assy
L-971472
0.46-0.52
3,000 psi
STD
Lower Assy
L-971473
0.46-0.52
3,000 psi
STD
Note: Other line sizes available on request. 2. Seal Kits comprise O-Rings and BURs only.
SPARES
L-971472K
Service Kit
L-971473K
Service Kit
L-831270
Packing 0.46
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
ELMAR DUAL HYDRAULIC ANNULAR WIRELINE VALVE 3,000 PSI WORKING PRESSURE (STD SERVICE)
M3000
Upper
Assembly
Lower
Packing
Assembly
Lubricator
Section(s)
Wireline
Logging
Tool
51
4
Pump-in
Sub
Lock-down
Lock-down
Screws
Screws
Released
Lower
Body
M3000 Lower
Assembly
Figure 1
Figure 2
Figure 3
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Slimline and "Slimlite" equipment complements Elmar's range of large bore pressure
control equipment. Available in H2S and STD service, the equipment is typically used during Open
Hole wireline intervention work, or for perforating operations with large casing guns.
Slimlite Tube
High Strength
Stainless Steel
52
4
Slimline
Size
I.D.
Thread Details
Working
Pressure
Test
Pressure
Service
5 1/2
4.89
5,000 psi
7,500 psi
STD
7 5/8
6.76
3,000 psi
4,500 psi
STD
7 5/8
6.76
5,000 psi
7,500 psi
STD
7 5/8
6.62
5,000 psi
7,500 psi
H2S
4.89
5,000 psi
10,000 psi
H2S
7 5/8
6.62
5,000 psi
10,000 psi
H2S
Slimline/Slimlite Unions
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Hydraulic Ball Valve is a full-opening, hydraulically controlled valve, designed for use with
Surface Pressure Control Equipment. It is operated with a hydraulic hand pump or a hydraulic
actuator and is normally installed below the Wireline Valve and above the Wellhead Gate Valves.
This allows the pressure control equipment string to be tested to full allowable working pressure
without applying pressure from above to the Wellhead Gate Valves.
The Hydraulic Ball Valve is available in working pressures up to 15,000 psi and with internal
diameters from 2 1/2" to 4". The Ball Valve is delivered complete with suitable top and bottom Quick
Union Connections to fit the Customer's string.
53
4
PART NUMBERS
I.D.
Working Pressure
Service
Quick Union
76-000103
5,000 psi
STD
76-000104
2 1/2
5,000 psi
H2S
76-000101
2 1/2
10,000 psi
STD
76-000106
10,000 psi
STD
76-000109
10,000 psi
STD
76-000123
5,000 psi
H2S
76-000102
10,000 psi
H2S
76-000111
10,000 psi
H2S
76-000117
10,000 psi
H2S
76-000132
10,000 psi
H2S
Part Number
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
Where conventional seals are sized for one line size only, the Elmar Multi Line Ram Seal has been
designed to seal a range of line sizes from blind and cover 0.092 Slickline through to 0.312
braided line using a specially developed elastomer. The ram seal is directly interchangeable with
conventional seals in Elmars wireline valves. For use up to 10,000 psi working pressure and -30C
to 121C, H2S service.
Ram Detail
54
4
Part Number
Working Pressure
Size
Line Size
L-980081
10,000 psi
Blind to 0.312
L-970103
10,000 psi
4 - 4 1/2
Blind to 0.312
L-970250
10,000 psi
5 - 5 1/2
Blind to 0.312
L-979939
10,000 psi
6 - 6 1/2
Blind to 0.312
Multi Line
Ram Seal
Dual Compact
Wireline Valve
c/w Multi Line Ram Seals
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Q-GUIDE ram, is a new proprietary design (Patents Pending) that provides a positive
alignment for the wireline. V-shaped flat guides on either side of the inner seal restrict the wireline
so that the section of line contacting the inner seal is always centred and parallel to the wireline
valve axis.
The Q-GUIDE has been designed to accommodate eccentric set-ups where the wireline goes
through the Wireline valve body at an angle and can be trapped by the rams before falling in the
cable groove.
The Q-GUIDE style of ram has been developed to replace integral guide style rams. Inner and
outer seals used in the Q-GUIDE are the same as used in the current styles of ram bodies.
The Elmar multi-line inner seal can be used with the Q-GUIDE ram.
The Q-GUIDE is available for all sizes of wireline valves.
Coding
L-972667
4-4.5
L-972668
5-5.5
L-972632
6-6.5
L-972631
55
4
ELASTOMER
V
VITON
NITRILE
HYD NITRILE
Blind - 5/16
5/16 - 1/2
LINE SIZE
0.125
3/16
7/32
1/4
9/32
5/16
G
3/8
7/16
15/32
Multi
Rams with
Integral Guides
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Elmar Shear and Seal Wireline Ram assembly has been developed to satisfy the requirement
for wireline operators to be able to shear their wire and seal the well independently of the well
control equipment used by the drilling or oil company.
The shear and seal ram assembly can be installed in Elmar Surelok and Compact design Wireline
Valves of up to 10,000 psi working pressure and has a full bore (except 2 1/2 - 3 version) guiding
and shearing capacity. For use with up to 15/32 wire, dependant on BOP ram assembly size.
The ram bodies are manufactured from H2S resistant alloy steel, the elastomers from tear
resistant Nitrile and the shear blades from through hardened alloy steel.
Ram Detail
PART NUMBERS
Part Number
BOP Size
Shearing Capacity
L-977452
2 1/2 - 3
L-972357
4 - 4 1/2
L-980016
5 - 5 1/2
L-979366
6 - 6 1/2
Shear and
Seal Ram
Triple Compact
Wireline Valve
c/w Shear and Seal Wireline Rams
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The Safety Flow Diverter is a safety device designed to provide an extra measure of safety
whenever it is necessary to work around the wellhead with the wireline valve closed on a cable and
the lubricator removed. (e.g. stranded cable repairs).
The Safety Flow Diverter is installed on top of the wireline valve with the cable in the wellbore.
Mounting of the Diverter is possible without cutting the cable since all components are split.
The Safety Flow Diverter provides an auxiliary seal around the cable to contain and divert any
residual leakage through the wireline valve. The Diverter incorporates a Cable Clamp in a compact
assembly. Leaked fluids are diverted through a high-pressure hose.
L-690586
Description
1/2" Hose Assembly x 60ft long
with Hex union and T piece
for low pressure return,
3,500 psi working pressure.
PART NUMBERS
Part Number
Service
Working Pressure
Quick Union
L-970276
H2S
5,000 psi
L-972899
H2S
10,000 psi
L-972953
STD
10,000 psi
L-979907
STD
5,000 psi
L-979917
H2S
5,000 psi
L-972951
STD
10,000 psi
L-970291
H2S
10,000 psi
L-972914
H2S
10,000 psi
L-970285
H2S
10,000 psi
L-972674
STD
10,000 psi
L-979920
H2S
10,000 psi
L-970425
H2S
5,000 psi
L-970413
H2S
10,000 psi
L-970434
H2S
10,000 psi
L-970491
H2S
10,000 psi
www.elmar.co.uk
57
4
PRESSURE CONTROL
EQUIPMENT
The Turn Around Sheave has been specially designed to reduce the overall height of the pressure
equipment string. With the conventional pressure equipment system the top sheave is positioned
above the tool catcher, grease injection control head and line wiper. By installing the sheave inside
a pressure retaining chamber and connecting one end to the tool catcher, the grease injection
control head and line wiper can be connected vertically downward, thus reducing the overall height
of the system. The design of the Turn Around Sheave allows the operator to utilise existing
equipment (grease injection control heads and line wipers), eliminating the need to purchase all
new items. Notice that the Turn Around Sheave must be secured to a member rated 2 x Maximum
Line Pull (similar to a Wireline Top Sheave) and cannot be used unsupported.
Drop Sheave
Turn Around Sheave
T.A.S. Adapter
Ball Check Valve
Tool Catcher
Spreader Beam
58
4
Wiper
Grease Head
Adapter
Grease Injection
Lubricator
ACCESSORIES
L-978923
L-978924
L-978927
L-978928
L-690174
L-690256
L-680215
L-680216
L-680217
L-680218
L-680331
L-680918
L-690099
L-690155
Wireline
I
I I
I I
I
I I I
III IIIII I
I
I
II
II
II
II
I I I I
I I I I
I
I I
I II
I II I I I I I I I I
II
II
Part
Number
Working
Pressure
Service
Wellhead Connection
Sheave Size
Line Size
L-977215
5,000 PSI
STD
2-8 UN Box
12
.220
L-977112
5,000 PSI
H2S
2-8 UN Box
12
.220
L-977513
5,000 PSI
STD
2-8 UN Box
12
.320
L-977514
5,000 PSI
H2S
2-8 UN Box
12
.320
10,000 PSI
H2S
2-8 UN Box
14
.230
I I II I I I I I I
1. Grease Head and Tool Catcher adapters required depending on flotube type. (2 -6-60 for SWS
flotubes and 2 -10 TPI for concentric flotubes).
PART NUMBERS
L-973111
II
II
Compact Mast
II
www.elmar.co.uk
PRESSURE CONTROL
EQUIPMENT
The SSR Lightweight Hay Pulley assembly is designed for standard and heavy duty operations with
slickline wire sizes of up to 0.125" diameter and line pulls of up to 5,500 lbs. The composite
material used in the hay pulley has excellent wear characteristics and also helps to reduce metal
to metal damage on expensive wirelines. The pulley is opened by simply pulling on two rings on
one side of the pulley, it then swivels on the centre pin to an open position to allow the wire to be
easily installed on the wheel. The centre pin has a fixture to accept a lightweight floor stand if
required.
Accessories:
Line Wiper
- Line Wiper B111-006
- Line Wiper Mount Bracket AssemblyMPA6-005
Floor Stand
59
4
Features:
Lightweight (under 7kgs)
Accepts Floor Stand
Line pull 2,500kgs (5,500lbs.)
Test load 5,000kgs (11,000lbs.)
Swivel eye connection
Takes standard Line Wipers
WEIGHTS
Weight
Pounds
(Kilos)
Hay Pulley
15.2
(6.9)
WHEEL SIZES
Size 16 Wheel for the following wire sizes:
0.092
0.108
0.125