Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
BS 5768:1979
ISO 6011:1978
Specification for
UDC 621.878:624.132.3:629.1.05
LICENSED TO INDIAN INSTITUTE OF TECHNOLOGY - KHARAGPUR, FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
Operating
instrumentation for
earth-moving
machinery
BS 5768:1979
Cooperating organizations
The Road Engineering Standards Committee, under whose direction this
British Standard was prepared, consists of representatives from the following
Government departments and scientific and industrial organizations:
The organizations marked with an asterisk in the above list, together with the
following, were directly represented on the committee entrusted with the
preparation of this British Standard:
Agricultural Engineers Association
Associated Offices Technical Committee
Department of Industry
Health and Safety Executive
National Coal Board
Trades Union Congress
Date of issue
Comments
LICENSED TO INDIAN INSTITUTE OF TECHNOLOGY - KHARAGPUR, FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
BS 5768:1979
Contents
LICENSED TO INDIAN INSTITUTE OF TECHNOLOGY - KHARAGPUR, FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
Page
Cooperating organizations
Inside front cover
National foreword
ii
1
Scope
1
2
Field of application
1
3
Instrumentation
1
4
Arrangement of instruments
2
Annex A Space envelope and preferred dimensions of instruments
3
Figure 1 Instrument arrangement
2
Figure 2 Engine tachometer and speedometer
3
Figure 3 Instruments other than tachometer and speedometer
3
Figure 4 Engine tachometer
3
Figure 5 Speedometer
3
Figure 6 Ammeter
3
Figure 7 Voltmeter
4
Figure 8 Thermometer
4
Figure 9 Pressure gauges
4
Table 1 Information obtainable
1
Table 2 Marking on meters
5
BSI 12-1999
BS 5768:1979
National foreword
NOTE
A British Standard does not purport to include all the necessary provisions of a
contract. Users of British Standards are responsible for their correct application.
Compliance with a British Standard does not of itself confer immunity
from legal obligations.
Summary of pages
This document comprises a front cover, an inside front cover, pages i and ii,
pages 1 to 5 and a back cover.
This standard has been updated (see copyright date) and may have had
amendments incorporated. This will be indicated in the amendment table on the
inside front cover.
ii
BSI 12-1999
LICENSED TO INDIAN INSTITUTE OF TECHNOLOGY - KHARAGPUR, FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
This British Standard has been prepared under the direction of the Road
Engineering Standards Committee and is identical with ISO 6011:1978
Earth-moving machinery Operating instrumentation published by the
International Organization for Standardization (ISO). ISO 6011 was produced as
a result of international discussions in which the United Kingdom took an active
part.
Terminology and conventions. The text of the International Standard has
been approved as suitable for publication without deviation, as a British
Standard. Some terminology and certain conventions are not identical with those
used in British Standards; attention is especially drawn to the following.
Wherever the words International Standard appear, referring to this standard,
they should be read as British Standard.
BS 5768:1979
2 Field of application
This International Standard applies to the following
types of operator-controlled machine:
crawler loaders and dozers;
wheel loaders and dozers;
graders;
tractor scrapers;
self-propelled compactors;
excavators;
off-highway trucks.
3 Instrumentation
Instrumentation at the instrument panel shall
provide information according to Table 1.
In the table:
A = mandatory (where applicable);
B = optional.
Off-highway trucks
Excavators
Self-propelled compactors
Tractor scrapers
Graders
Information obtainable
B B B A B B
B A A B A
A A A A A A A
A A A A A A A
A A A A A A A
A A A A A A
B B B B B B B
A A A A A A A
B B B B B B B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
BSI 12-1999
LICENSED TO INDIAN INSTITUTE OF TECHNOLOGY - KHARAGPUR, FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
1 Scope
BS 5768:1979
4 Arrangement of instruments
The instruments should be divided into groups on
the panel as shown in Figure 1.
Left group: for engines (for example engine water
thermometer, oil pressure gauge, etc.)
BSI 12-1999
BS 5768:1979
Figure 5 Speedometer
A.2.3 Ammeter
LICENSED TO INDIAN INSTITUTE OF TECHNOLOGY - KHARAGPUR, FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
BSI 12-1999
BS 5768:1979
A.2.4 Voltmeter
A.2.5 Thermometer
Type of fluid (for example coolant, engine oil) and
temperature should be marked on the dial face.
NOTE
Figure 8 Thermometers
BSI 12-1999
LICENSED TO INDIAN INSTITUTE OF TECHNOLOGY - KHARAGPUR, FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
Figure 7 Voltmeter
BS 5768:1979
Marking
Positioning
Speedometer
on the
housing
surface
Symbols + and
near the
terminals
Ammeter and
voltmeter
Thermometer
and pressure
gauge
BSI 12-1999
on the
housing
surface
Maximum capacity
on the
housing
surface
Maximum capacity
on the
housing
surface
LICENSED TO INDIAN INSTITUTE OF TECHNOLOGY - KHARAGPUR, FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
Engine
tachometer
BS 5768:1979
ISO 6011:1978
BSI offers members an individual updating service called PLUS which ensures
that subscribers automatically receive the latest editions of standards.
Buying standards
Orders for all BSI, international and foreign standards publications should be
addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001.
In response to orders for international standards, it is BSI policy to supply the
BSI implementation of those that have been published as British Standards,
unless otherwise requested.
Information on standards
BSI provides a wide range of information on national, European and
international standards through its Library and its Technical Help to Exporters
Service. Various BSI electronic information services are also available which give
details on all its products and services. Contact the Information Centre.
Tel: 020 8996 7111. Fax: 020 8996 7048.
Subscribing members of BSI are kept up to date with standards developments
and receive substantial discounts on the purchase price of standards. For details
of these and other benefits contact Membership Administration.
Tel: 020 8996 7002. Fax: 020 8996 7001.
Copyright
Copyright subsists in all BSI publications. BSI also holds the copyright, in the
UK, of the publications of the international standardization bodies. Except as
permitted under the Copyright, Designs and Patents Act 1988 no extract may be
reproduced, stored in a retrieval system or transmitted in any form or by any
means electronic, photocopying, recording or otherwise without prior written
permission from BSI.
This does not preclude the free use, in the course of implementing the standard,
of necessary details such as symbols, and size, type or grade designations. If these
details are to be used for any other purpose than implementation then the prior
written permission of BSI must be obtained.
BSI
389 Chiswick High Road
London
W4 4AL
LICENSED TO INDIAN INSTITUTE OF TECHNOLOGY - KHARAGPUR, FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU.
It is the constant aim of BSI to improve the quality of our products and services.
We would be grateful if anyone finding an inaccuracy or ambiguity while using
this British Standard would inform the Secretary of the technical committee
responsible, the identity of which can be found on the inside front cover.
Tel: 020 8996 9000. Fax: 020 8996 7400.