Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Version 9.0.0.684
January 2010
DEA0000
Copyright
Copyright 2004-2010 Intergraph Corporation. All Rights Reserved.
Including software, file formats, and audiovisual displays; may be used pursuant to applicable software
license agreement; contains confidential and proprietary information of Intergraph and/or third parties which
is protected by copyright law, trade secret law, and international treaty, and may not be provided or otherwise
made available without proper authorization.
Trademarks
Intergraph, the Intergraph logo, PDS, SmartPlant, SmartSketch, FrameWorks, INtools,
MARIAN, ISOGEN, and IntelliShip are registered trademarks and SupportModeler and
SupportManager are trademarks of Intergraph Corporation. Microsoft and Windows are
registered trademarks of Microsoft Corporation. MicroStation is a registered trademark of
Bentley Systems, Inc. Other brands and product names are trademarks of their respective
owners.
Table of Contents
Table of Contents
SmartPlant Instrumentation: Cable Block Diagrams .............................................................4
General Information ...............................................................................................................5
Lab 1: Creating Symbols for use in a Cable Block Diagram Report .....................................6
Lab 2: Create Project Instruments, Panels, and Cables........................................................18
Lab 3: Create a Working Cable Block Drawing and Associate Panels to Cables. ..............23
Lab 4: Adding Revisions......................................................................................................33
General Information
The following labs show the user how to create a cable block diagram. You will create
panels, cables, and panel symbols and use them accordingly to create a cable block
diagram report. A similar report is shown here.
NOTE: Its important to apply these preference settings. When working with symbols in
Symbol Editor, any new macro or text added will use this Font size setting. This will save
time when building symbols.
Symbol Editor.
NOTE: Always open Symbol Editor from in SmartPlant Instrumentation before working in it!
3. Select File
By changing the sheet size, this will allow you to size your symbols with the understanding
they will appear on a 17x11 sheet of paper.
Be sure to keep this document window open as this will be the template space used for all
panel symbols created.
6. Select Actions
8. Save
your work.
9. For the cables to connect, the symbol must have connection points.
only one cable will connect to a device panel.
Select Actions
Well assume
Connection points are created primarily for terminal strip connections but they are also
used for connecting cables in a CBD. In the Connection Points toolbar, set as shown.
10. Land the connection point then pull the mouse curser away from the connection point
before a left click to set sequence to 2.
11. Click
12. Select the connection point and add the new macro
13. Save
as shown.
your work.
14. In Symbol Editor, use the Ctrl + Tab keys to navigate back to your working template
area. Draw the next rectangle as shown.
Land connection points for both the left side and the right side. Assume each JB or MR
allows up to 4 cables to connect coming into or exiting the panel.
18. Land 4 connection points on the left side. Be sure to start from the top and land each
connection point one right after the other.
Each point has a sequence number
assigned. Select Actions Place Connection Points
You may keep landing connection points as long as you move the dashed line away
from the point to set the angle of the cable as it will appear. Once you have landed
all the connection points, click Finish.
19. Save
your work.
20. Land 4 connection points on the right side. Use the settings as shown.
23. Save
your work.
In SmartPlant Instrumentation, create the following instruments using the batch creation
tool.
1. Enter the Instrument Index module
2. Select Edit
4. Click Create.
5. Once the process finishes, click Close.
We used the batch process to create the instruments we needed. The instruments were
associated with instrument types which automatically created a device panel and cable. A
connection was made between the device panel and cable. We need to disconnect each
device cable from the device panel. The type of association we need to work with in this
lab requires that no actual wiring has been connected to a terminal strip on either side of
the cable.
6. Find the following device panels and disconnect all wiring.
-
101-FT-400
101-FT-401
101-FT-402
101-FT-403
TIP: Click the ellipses button to add new entries to the supporting tables.
NOTE: Its not necessary to create terminals strips or any other items in the panel
since this is a preliminary report of cable and panel connections.
1. Select File
3. Click OK.
Domain Explorer.
6. Drag device panel 101-FT-400 from Domain Explorer to the drawing area.
8. Be sure to save
your work.
Connection
Activate
11. While in Connection Mode, you should see all the possible connection points
available to land cable ends. Land end 1 and end 2 of device cable C-101-FT400 as shown.
Youll know when youve focused in on the connection point. A blue dot will
appear.
your work.
the drawing to see the resulting macros appear.
15. Using Connection Mode, connect the remaining device panels to PROJECT
JB 1.
Be sure to select the cable you wish to connect in Domain Explorer before
connecting it!
In this window, you may see the existing associations for this cable. You may
also create new associations for cables missing an association on either end.
17. Close the open Associate Cable window.
18. Select cable PROJECT JB TO MR CABLE 1. Select Actions
Panels.
Associate
19. Currently there are no panel assignments. In Domain Explorer find junction
box PROJECT JB 1. Drag this panel to the Cable End One position.
20. Find marshaling rack PROJECT MR 1 and drag it into the End Two position.
NOTE: The
Dissociate icon allows you to select an assigned cable and
remove it from End One or End Two or remove both.
22. If you regenerate your cable block drawing, you should see the new cable
association appear.
NOTE: Like other Enhanced Reports, you may move panels and wires to new
positions and save those positions to the database.
23. Be sure to save
your work.
your work.
Revisions or