Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1
network architecture
Huawei D-CCAP Solution
Background
The analog ber modulation and transmission mode used in traditional CMTS often reduce CNR, making
it impossible to adopt higher-order modulation methods. In comparison, an attenuation of 7 to 8 dB for
In the cable access market, the traditional cable TV service is shrinking, while the broadband service
becomes a new growing point. Following this trend, MSOs are intend to provide higher bandwidth
service and build a converged full service access network. To meet this requirement, Huawei proposed
CNR can be achieved in D-CCAP through digital bers and transmission technology, paving the way for
higher-order modulation methods. Empirical research data shows that D-CCAP can increase the average
bandwidth by 30%.
the distributed CCAP (D-CCAP) solution, which integrates FTTx and CCAP, to help MSOs build ultrabroadband and converged service access network.
Save 30% investment, 70% headend space and 80% ber resource
CAPEX comparison between CCAP and D-CCAP
Mixer
CM
D-CCAP
RX
Fiber Node
DOCSIS 3.0/3.1
Family
Mixer
CM
Hub
Fiber Node
DOCSIS3.0
CMC
Analog Fiber
CMTS
OSS
0 1 0 Hub
Digital Fiber
OLT
OSS
FTTH
Family
ONT
Compared to distributed architecture, traditional node-segmentation need more head end space, larger
power supplies, and additional optical bers. Whereas in a distributed solution, only a few optical line
terminals (OLTs) need to be deployed at the head end, and DOCSIS-compatible coaxial media converters
(CMCs) are deployed without adding optical transmitters and receivers. This simplied solution can
reduce head end space usage by 70%, power consumption by 50% and ber resource usage by 80%.
Totally will save about 30% investment.
7.5G@5ch
1.6G@32ch 2G@32ch
I-CCAP
01
D-CCAP
D3.0/D3.1
DOCSIS3.1
10G@5ch
I-CCAP
Business
FTTH
Residential
FT
FTT TO
M
Mobile
backhaul
D-CCAP
02
When deploying CCAP networks with access over coaxial cables, MSOs often apply FTTH methods for
newly constructed areas and commercial users. A distributed network can converge with PON where
Solution Component
both PON and DOCSIS can be deployed on unify access platform and OSS, moreover, centralized
management can make the maintenance mode remains exactly the same as that of traditional CMTS and
NMS: U2000
Cable Modem
OLT
Model
Device parameters
MA5800-X7
512 CMC
64k CM
Proactive Awareness
20 % Customer Complaints Reduced, 40% Issue Fault Handle Time Reduced
CMC
Key Items
Description
Standard
Temperature range
-40oC~55oC
IP Protection level
IP65
Dimensions
Power
95W(with Rx built-in)
Uplink port
GPON/10GPON/GE/10GE
03
04
Applications
Key Items
Description
Channel num
DOCSIS 3.0
4US*16DS
Max Bandwidth: US:160M@256QAM/DS:980M@1024QAM
8US*32DS
Max Bandwidth : US:320M@256QAM/DS:1.9G@1024QAM
DOCSIS 3.1
2US*2DS
Max Bandwidth: US: 2Gbps@4096QAM/DS:4.6Gpbs@16384QAM
Frequency range
US:5-42MHz/DS:54~1002MHz
US:5-65MHz/DS:87~1002MHz
US:5-85MHz/DS:108MHz~1002MHz
US:5-204MHz/DS:258MHz~1200MHz
CM number
1023 CM
RF port num
4*RFOUT/2*RFOUT
Modular
components
Installation method
Cable Modem
Model
Bridge/HomeGateway
PORTS
Channel Num
WiFi
CG1010
Bridge
1*GE
8DS*4US
NA
CG1241D
Home Gateway
4*GE+2*POTS
8DS*4US
2.4G: WOMBO(2x2),
5GHz: module(2x2)
CG3245Q
Home Gateway
4*GE+2*POTS +
24DS*8US
2*USB
2.4G: WOMBO(2x2),
5GHz: module(2x2)
U2000
05
Key Items
Description
15,000
CM Mgt capability
2,000,000
06