Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
ALM-26757 RET
Antenna Running Data
and Configuration
Mismatch
Alarm
?
ALM-26751
RET Antenna
Motor Fault
ALM-26752
ALD Hardware
Fault
ALM-26541
ALD
Maintenance
Link Failure
ALM-26753
RET Antenna
Not Calibrated
ALM-26754
RET Antenna
Data Loss
Yes
DSP ANTENNAPORT/DSP
RETPORT/LST
ANTENNAPORT/LST
RETPORT to query the
configuration of the ALD
Power Supply switch &
Current Threshold.
ALD switch configuration is
consistent with the actual
configuration
consistent
Is
Cleared??
MOD ANTENNAPORT/MOD
RETPORT to turn on the ALD switch
of the RF unit connected to the RET
antenna.
Is
Cleared??
consistent
http://eg.linkedin.com/in/mohamedabdelrazekbakry
Solved
No
Yes
NO
MOD RET/MOD
TMA/MOD
RETSUBUNIT/MOD
TMASUBUNIT to
actual situation
No
Not Solved
MOD ANTENNAPORT/MOD
RETPORT...to turn off the ALD switch
of the RF unit connected to the RET
Replace the ALD (RET/TMA)
MOD ANTENNAPORT/MOD RETPORT
to turn on the ALD switch of the RF unit
connected to the RET.
SCN ALD to scan the new RET
MOD RET to change Serial No.
MOD RETSUBUNIT to
modify the error range of the
downtilt alarm
inconsistent
NO
Related Faults
26530 RF Unit ALD
Current Out of Range
26531 RF Unit ALD
Switch Configuration
Mismatch
No
Reset RET/TMA
MOD ANTENNAPORT/MOD
RETPORT...to turn off the ALD
switch of the RF unit connected to the
RET antenna
ALM-26531
RF Unit ALD
Switch
Configuration
Mismatch
Yes
ALM-26530
RF Unit ALD
Current Out of
Range
MOD ANTENNAPORT/
MOD RETPORT
Correcting ALD power
supply switch & ALD
Current Threshold
configuration
No
Not Solved
Is
Cleared??
MOD RETTILT
Set the RET antenna tilt
Is configured downtilt (LST
RETSUBUNIT ) exceeds the
RET antenna capability? (DSP
RETDEVICEDATA). Is
configured downtilt appropriate?
Yes
Power cycle the RF unit
then Replace or swap the
RF unit if not solved
No
Cleaning KIT
(White Grease + DWL + Brushes + Dry Textile/
Towel )
Solved
Fo r M o r e D e ta i l s
M Abd El Razek
End
Solved
Yes
Mobile +201003740215