TABLE RCB-7.133 Continued p Design pressure, psi (kPa), shell side or tube side, corrected for vacuum when present on opposite side, or differential pressure when specified by customer
Design pressure, psi (kPa). Shell side or tu be
side, corrected far vacuum when present on opposite side, or differential pressure when specified by customer
(f)
Design pressure, psi (kPa), shell side or tu be
side, corrected far vacuum when present on opposite side, or differential pressure when specified by customer
(g)
Design pressure, psi (kPa), tube side, corrected
far vacuum when present on the shell side
~~
C=
Perimeter of tube layout
measured stepwise in increments of one tube-to-tube pitch center-to-center of the outermost tubes, in inches (mm). See Figure RCB-7.133
A=
total area enclosed by e
in square inches (mm2). See Figure RCB-7.133
~V~
Defined in Paragraph RCB-7.1412
(h)
~i 52
Standards Of The Tubular Exchanger Manufacturers Association