Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
4. The main constituent of cement which is responsible for initial setting of cement isa) dicalcium silicate
b) tricalcium silicate
c) tricalcium aluminate
d) all of the above
6. The initial setting time for ordinary Portland cement as per IS specifications should be less thana)10 minutes
b)30 minutes
c060 minutes
d)600 minutes
7.As per IS specifications, the maximum final setting time for ordinary Portland cement should bea)30 minutes
b)1 hour
c) 6 hours
d)10 hours
9. To produce low heat cement, it is necessary to reduce the compounda) di-calcium silicate
b) tri-calcium silicate
c) tri-calcium aluminate
d) tetra_calcium alumino ferrite
10. Weight of a cement bag generallya)30 kg
b)40 kg
c) 70 kg
d) 50 kg
11. The ratio of cement - sand mortar for general brick worka) 1:6
b) 1:2
c) 1:10
d) 1:4
12. Soundness is due to excessa) lime only
b) magnesia only
c) sulphates only
d) all of these
13.The ratio of cement-sand mortar used for brick-walla) 1:5
b)1:3
c)1:7
d)1:1
14.the grade of cement denotesa) tensile strength
b) compressive strength
c) shear strength
d) bending strength
15. the puzzolana is added to cementa) increase the heat of hydration
b) increase the plasticity
c)increase the workability
d) reduce the heat of hydration
16. gypsum is used in cement at time of manufacturinga) to decrease alumina
b) to decrease silca
c)to prevent from flash set
d) to decrese lime
17. lime content in cement is approximatelya) 60-70%
b)40-60%
c)10-40%
d)70-90%
18. hydraulic lime is obtained froma) marble
b)kankar
c)wood
d)none of these
19. the grade of cement written on bag
a)cube strength
b)cylinder strength
c)fibre strength
c) none of these
Ans.
1.a
14.b
2.b
15.d
3.c
16.c
4.c
18.b
5.b
19.a
6.b
20.b
7.d
8.a
9.c
10.d
11.a
12.d
13.a