Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
g/cm3
mPa.s
%
240
31
0.35 wt max.
230
245
mm Hg @ 25C
C
months
Please note
1) Cellanate M must always be stored at the correct temperature (15-25C)
2) Isocyanate must only be used in areas with sufficient ventilation or appropriate local
extraction. Suitable protective clothing, including eye/face protection must be worn.
3) Spillages should be cleaned by trained personnel only. Those dealing with major
spillages should wear full protective clothing, including respiratory protection.
4) Whilst every effort is made to ensure its accuracy, the data held on this sheet is meant
for informational purposes only. The typical properties listed are the result of extensive
laboratory tests, but since IFS Chemicals Ltd has no control over the end use of each
material, we cannot guarantee these results are obtained in practice. Users should
conduct their own tests to determine the suitability of each material to its intended
application.
See Safety Data sheet for safe-handling information
IFS/01/04/REV1
ENVIROFOAM 16.235
A Fire Retardant Water Blown Polyurethane Foam
for In-situ and Buoyancy Applications.
Envirofoam 16.235 is designed for applications where good flow and even
density distribution are required, and is of low/medium viscosity for ease of
mixing with Cellanate M isocyanate.
Applications include insulation for buoyancy applications and general filling of
voids. Envirofoam 16.235 can be machine or hand mixed, and has a 1:1
volumetric ratio.
Envirofoam 16.235 is available in 25 and 200kg nett drums.
Both resin and isocyanate are sensitive to moisture and should be stored in a
dry environment. Partly used containers should be resealed immediately after
use. Envirofoam 16.235 has a minimum shelf life of three months when stored
at temperatures below 30C.
Storage
Temperature
Specific Gravity
(20%)
Viscosity
(25oC)
Mix Ratio (weight)
Mix Ratio (volume)
Cream Time
Gel Time
Free Rise Density
Free Rise Density
K. Value
Compressive
Strength @ 10%
Closed Cell Content
Fire Retardancy
Dimensional
Stability 24hr 70oC
Resin
Isocyanate
Resin
Isocyanate
Resin
Isocyanate
Resin
Isocyanate
Resin
Isocyanate
Resin
Isocyanate
100g at 20oC
100g at 20oC
Overall
Core
Initial
kPa (Parallel to rise)
ASTM D2856
BS4735
Max % Linear
Change
Hazy Colourless
Liquid
Brown Liquid
15-25oC
15-25oC
1.09g/cm3
1.24 g/cm3
400 mPa.s
240 mPa.s
100
114
100
100
45 seconds
185 seconds
44.5 kg/m3
42 kg/m3
0.02830
200
>90%
<125mm Burn Length
-0.96%
PROCESSING
The two components can be mixed by hand or through a suitable polyurethane
dispenser. For optimum results the components should be conditioned at 20oC
during processing.
Please note:
Whilst every effort is made to ensure its accuracy, the data held on this sheet is meant for informational purposes
only. The typical properties listed are the result of extensive laboratory tests, but since I.F.S. Chemicals Ltd. has
no control over the end use of each material, we cannot guarantee these results are obtained in practice. Users
should conduct their own tests to determine the suitability of each material to its intended application.
See Safety Data sheet for safe-handling information
IFS/09/00/REV1