Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
The First International Conference on Interdisciplinary Research and Development, 31 May - 1 June 2011, Thailand
65.1
Special Issue of the International Journal of the Computer, the Internet and Management, Vol. 19 No. SP1, June, 2011
65.2
B. Experimental Parameters
Hybrid atomization was carried out
with different gas pressures: 0.5, 0.6, and 0.7
MPa and melting temperatures: 710C,
750C, 800C. Other parameters were disk
diameter:
100mm,
rotational
speed:
23000rpm and spray distance: 100 mm
which were kept constant in this study.
IV.RESULTS AND DISCUSSION
The First International Conference on Interdisciplinary Research and Development, 31 May - 1 June 2011, Thailand
65.3
TABLE 5
PARTICLE SIZE DISTRIBUTION AT GAS
PRESSURE 0.6 MPA AND TEMPERATURE 710C
TABLE 9
PARTICLE SIZE DISTRIBUTION AT GAS
PRESSURE 0.7 MPA AND TEMPERATURE 750C
TABLE 6
PARTICLE SIZE DISTRIBUTION AT GAS
PRESSURE 0.7 MPA AND TEMPERATURE 710C
TABLE 10
PARTICLE SIZE DISTRIBUTION AT GAS
PRESSURE 0.5 MPA AND TEMPERATURE 800C
TABLE 7
PARTICLE SIZE DISTRIBUTION AT GAS
PRESSURE 0.5 MPA AND TEMPERATURE 750C
TABLE 11
PARTICLE SIZE DISTRIBUTION AT GAS
PRESSURE 0.6 MPA AND TEMPERATURE 800C
TABLE 8
PARTICLE SIZE DISTRIBUTION AT GAS
PRESSURE 0.6 MPA AND TEMPERATURE 750C
TABLE 12
PARTICLE SIZE DISTRIBUTION AT GAS
PRESSURE 0.7 MPA AND TEMPERATURE 800C
Special Issue of the International Journal of the Computer, the Internet and Management, Vol. 19 No. SP1, June, 2011
65.4
The First International Conference on Interdisciplinary Research and Development, 31 May - 1 June 2011, Thailand
65.5
IV. CONCLUSIONS
In this research, hybrid atomization
unit for producing aluminum powder was
fabricated. By using the hybrid atomization
method, it can be produced fine, nearly
spherical aluminum powder with high yields.
Aluminum powders with the particle size of
under 75 m were obtained.These
atomization experiments confirm the strong
influence of two processing variables (gas
pressure and melting temperature) on particle
size distribution.The smallest size of 50nm
was obtained from powder synthesize at
800C. The product total yield (97.6%) can
be obtained at gas pressure 0.7 MPa and
temperature 800C.
REFERENCES
[1] S. K. Grjotheim and B. J. Welch, Aluminum
smelter technology- a pure and applied
approach, 1988, pp. 1-10.
[2] J. B. Verlinden and L. Froyen, Aluminum
powder metallurgy, 1994, pp. 1-26.
[3] S. E. Klar and J. W. Fesko, Gas and water
atomization, ASM Handbook , ASM
International, USA, 1984, pp.2539.
[4] J. J. Dunkley, Atomization, powder metal
technologies and applications, ASM Handbook,
ASM International, Ohio, 1998, pp. 35-52.
[5] Y.Z. LIU, K. Minagawa, H. Kakisawa and H.
Halada Melt film formation and disintregation
Special Issue of the International Journal of the Computer, the Internet and Management, Vol. 19 No. SP1, June, 2011
65.6