Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
As of April 6, 2016
B18.2.3.1M-1999 (R2011)
Metric Hex Cap Screws
Previous edition 1979 (R1995)
ANSI Approved: 5/10/99
ANSI Reaffirmation: 8/15/05; February 24, 2011
Withdrawn August 2, 2012
B18.2.3.2M-2005
Metric Formed Hex Screws
Previous edition 1979 (R1995)
ANSI Approved: 4/29/05
Withdrawn October 20, 2010
B18.2.3.6M-1979 (R2006)
Metric Heavy Hex Bolts
Withdrawn because this is not referenced in any
material standard and it is not used in industry.
B18.2.4.1M-2002 (R2007)
Metric Hex Nuts, Style 1
Previous edition 1979 (R1995)
ANSI approved 1/24/02
ANSI Reaffirmation: 7/11/07
Withdrawn September 23,2011
B18.2.4.2M-2005 (R2010)
Metric Hex Nuts, Style 2
Previous edition 1979 (R1995)
ANSI Approved: 04/01/05
ANSI Reaffirmation: August 19, 2010
Withdrawn September 23,2011
B18.2.4.4M-1982 (R2010)
Metric Hex Flange Nuts
ANSI Reaffirmed: 2/03/99, 8/15/05; October 20, 2010
Withdrawn September 23,2011
B18.2.4.5M-2008
Metric Hex Jam Nuts
Previous ed: 1979
ANSI Approved: November 11, 2008
Withdrawn September 23,2011
B18.2.4.6M-2010
Metric Heavy Hex Nuts
ANSI Reaffirmed: 3/3/98, 7/29/03
ANSI Approved: February 22, 2010
Withdrawn September 23,2011
B18.2.7.1M-2002 (R2007)
Metric 12-Spline Flange Screws
ANSI approved 1/24/02
Erratum published December 2002
ANSI Reaffirmed: 7/11/07
Withdrawn March 2, 2012
B18.3.1M-1986 (R2008)
Socket Head Cap Screws Metric
ANSI Approved 6/26/02
ANSI Reaffirmed: July 31, 2008
Withdrawn January 24, 2014
B18.3.2M-1979 (R2008)
Metric Series Hexagon Keys And Bits
ANSI Reaffirmed: 3/3/98, 7/8/03, July 15, 2008
Withdrawn January 24, 2014
B18.3.3M-1986 (R2008)
Hexagon Socket Head Shoulder Screws Metric
ANSI Reaffirmed: 6/26/02, July 15, 2008
Withdrawn January 24, 2014
B18.3.4M-1986 (R2008)
Hexagon Socket Button Head Cap Screws Metric
ANSI Reaffirmed: 6/26/02, July 31, 2008
Withdrawn January 24, 2014
B18.3.5M-1986 (R2008)
Hexagon Socket Flat Countersunk Head Cap Screws
Metric
ANSI Reaffirmed: 6/26/02, July 31, 2008
Withdrawn January 24, 2014
B18.3.6M-1986 (R2008)
Metric Series Hexagon Socket Set Screws
ANSI Reaffirmed: 6/27/02, July 31, 2008
Withdrawn January 24, 2014
B18.5.2.2M-1982 (R2010)
Metric Round Head Square Neck Bolts
ANSI Reaffirmed: 5/24/00, 8/15/05; November 29, 2010
Withdrawn: October 10, 2014
B18.5.2.3M-1990 (R2003)
Round Head Square Neck Bolts With Large Head (Metric
Series)
Withdrawn August 25, 2008
B18.6.4-2009
Thread Forming And Thread Cutting Tapping Screws And
Metallic Drive Screws (Inch Series)
B18.8.3M-2000 (R2005)
Spring Pins Coiled Type (Metric Series)
B18.8.4M-2000 (R2005)
Spring Pins Slotted (Metric Series)
B18.8.5M-2000 (R2005)
Machine Dowel Pins - Hardened Ground (Metric Series)
B18.8.6M-2000 (R2005)
Cotter Pins (Metric Series)
B18.8.7M-2000 (R2005)
Headless Clevis Pins (Metric Series)
B18.8.8M-2000 (R2005)
Headed Clevis Pins (Metric Series)
B18.8.9M-2000 (R2005)
Grooved Pins (Metric Series)
B18.15.1M-1998 (R2004)
Forged Lifting Eyes
B18.25.1M-1996 (R2008)
Square and Rectangular Keys and Keyways
ANSI Approved: 2/5/96
ANSI Reaffirmed: 8/25/08
Withdrawn January 27, 2014
B18.16.1M-1979 (R2001)
Mechanical And Performance Requirements For
Prevailing-Torque Type Steel Metric Hex Nuts And Hex
Flange Nuts
B18.16.2M-1979 (R2001)
Torque-Tension Test Requirements For Prevailing Torque
Type Steel Metric Hex Nuts And Hex Flange Nuts
B18.16.3M-1998
Dimensional Requirements For Prevailing-Torque Type
Steel Metric Hex Nuts And Hex Flange Nuts
B18.17-1968 (R1983)
Wing Nuts, Thumb Screws, and Wing Screws
[SC6]
Withdrawn April 16, 1993
B18.18.1-2007
Inspection and Quality Assurance For General Purpose
Fasteners
Consolidated into B18.18
Previous Edition: 1987 (R2006)
ANSI Approved 3/03/06
B18.18.2M-2009
Inspection and Quality Assurance For High-Volume
Machine Assembly Fasteners
Consolidated into B18.18
ANSI Reaffirmed: 2/03/1999, 8/15/2005
ANSI Approved: July 14, 2009
B18.18.3M-1987 (R2005)
Inspection and Quality Assurance for Special Purpose
Fasteners
B18.18.5M-1998 (R2009)
Inspection and Quality Assurance Plan Requiring InProcess Inspection And Controls
Consolidated into B18.18
ANSI Approved: 1/6/98
ANSI reaffirmed 7/08/03; April 30, 2009
B18.18.6M-1998 (R2009)
Quality Assurance Plan for Fasteners Produced In a Third
Party Accreditation System
Consolidated into B18.18
ANSI approved 1/6/98
ANSI reaffirmed 7/08/03; April 30, 2009
B18.18.7M-1998 (R2009)
Quality Assurance Plan For Fasteners Produced In A
Customer Approved Control Plan
Superceded by B18.24-2004
Superceded by B18.24-2004
Superceded by B18.24-2004
B18.25.1M-1996 (R2008)
Square and Rectangular Keys and Keyways
ANSI Approved: 2/5/96
ANSI Reaffirmed: 8/25/08
Withdrawn January 27, 2014
B18.25.2M-1996 (R2008)
Woodruff Keys and Keyways
ANSI Approved:2/5/96
ANSI Reaffirmed: 8/25/08
Withdrawn January 27, 2014
B18.25.3M-1998 (R2008)
Square and Rectangular Keys And Keyways:
Width Tolerances and Deviations Greater Than the Basic
Size
ANSI Approved: 6/17/98
ANSI Reaffirmed: 8/25/08
Withdrawn January 28, 2014