Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
: 10 February 2015
Other means of
identification
: Not available.
1.2 Relevant identified uses of the substance or mixture and uses advised against
Product use
: Professional applications, Used by spraying.
Use of the substance/
: Coating.
mixture
1.3 Details of the supplier of the safety data sheet
PPG Coatings SPRL/BVBA
Tweemontstraat 104
B-2100 Deurne
Belgium
Telephone +32-33606311
Fax +32-33606435
: PMC.Safety@PPG.com
1/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 United Kingdom (UK)
Code
: 00293378
SIGMADUR 188/520/550 HARDENER
: 10 February 2015
Signal word
Hazard statements
Precautionary statements
Prevention
Response
Storage
Disposal
Hazardous ingredients
Supplemental label
elements
Annex XVII - Restrictions
on the manufacture,
placing on the market and
use of certain dangerous
substances, mixtures and
articles
: Warning
: Flammable liquid and vapour.
Harmful if inhaled.
Causes skin irritation.
May cause an allergic skin reaction.
May cause respiratory irritation.
: Wear protective gloves. Wear eye or face protection. Keep away from heat, hot
surfaces, sparks, open flames and other ignition sources. No smoking. Avoid
breathing vapour.
: IF INHALED: Remove person to fresh air and keep comfortable for breathing. If skin
irritation or rash occurs: Get medical attention.
: Store in a well-ventilated place. Keep cool.
: Not applicable.
: Hexamethylene diisocyanate, oligomers
xylene
hexamethylene-di-isocyanate
: Contains isocyanates. May produce an allergic reaction.
: Not applicable.
: Not applicable.
English (GB)
2/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 United Kingdom (UK)
Code
: 00293378
SIGMADUR 188/520/550 HARDENER
: 10 February 2015
: Mixture
Classification
Product/ingredient
name
Identifiers
Hexamethylene
REACH #:
diisocyanate, oligomers 01-2119485796-17
EC: 500-060-2
CAS: 28182-81-2
2-methoxyREACH #:
1-methylethyl acetate
01-2119475791-29
EC: 203-603-9
CAS: 108-65-6
Index: 607-195-00-7
xylene
REACH #:
01-2119488216-32
EC: 215-535-7
CAS: 1330-20-7
Index: 601-022-00-9
ethylbenzene
REACH #:
01-2119489370-35
EC: 202-849-4
CAS: 100-41-4
Index: 601-023-00-4
hexamethylene-diREACH #:
isocyanate
01-2119457571-37
EC: 212-485-8
CAS: 822-06-0
Index: 615-011-00-1
% by
weight
50 <75
10 <25
10 <25
1 - <3
0.3 <0.5
67/548/EEC
Type
Xn; R20
[1] [2]
Xi; R37
R43
R10
[2]
R10
[1] [2]
Xn; R20/21
Xi; R38
F; R11
[1] [2]
Xn; R20
T; R23
Xi; R36/37/38
R42/43
[1] [2]
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations
applicable, are classified as hazardous to health or the environment, are PBTs or vPvBs or have been assigned a
workplace exposure limit and hence require reporting in this section.
Type
[1] Substance classified with a health or environmental hazard
[2] Substance with a workplace exposure limit
[3] Substance meets the criteria for PBT according to Regulation (EC) No. 1907/2006, Annex XIII
[4] Substance meets the criteria for vPvB according to Regulation (EC) No. 1907/2006, Annex XIII
[5] Substance of equivalent concern
Occupational exposure limits, if available, are listed in Section 8.
SUB codes represent substances without registered CAS Numbers.
English (GB)
3/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 United Kingdom (UK)
Code
: 00293378
SIGMADUR 188/520/550 HARDENER
: 10 February 2015
: If swallowed, seek medical advice immediately and show the container or label. Keep
person warm and at rest. Do NOT induce vomiting.
Protection of first-aiders
: No action shall be taken involving any personal risk or without suitable training. If it is
suspected that fumes are still present, the rescuer should wear an appropriate mask
or self-contained breathing apparatus. It may be dangerous to the person providing
aid to give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly
with water before removing it, or wear gloves.
4.2 Most important symptoms and effects, both acute and delayed
Potential acute health effects
Eye contact
: No known significant effects or critical hazards.
Inhalation
Skin contact
Ingestion
: No known significant effects or critical hazards.
Over-exposure signs/symptoms
Eye contact
: Adverse symptoms may include the following:
pain or irritation
watering
redness
Inhalation
: Adverse symptoms may include the following:
respiratory tract irritation
coughing
Skin contact
: Adverse symptoms may include the following:
irritation
redness
dryness
cracking
Ingestion
: No specific data.
4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician
: In case of inhalation of decomposition products in a fire, symptoms may be delayed.
The exposed person may need to be kept under medical surveillance for 48 hours.
Specific treatments
: No specific treatment.
English (GB)
4/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 United Kingdom (UK)
Code
: 00293378
SIGMADUR 188/520/550 HARDENER
: 10 February 2015
6.2 Environmental
precautions
: No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilt material. Shut off all ignition sources.
No flares, smoking or flames in hazard area. Avoid breathing vapour or mist.
Provide adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Put on appropriate personal protective equipment.
: If specialised clothing is required to deal with the spillage, take note of any
information in Section 8 on suitable and unsuitable materials. See also the
information in "For non-emergency personnel".
: Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
English (GB)
: Stop leak if without risk. Move containers from spill area. Use spark-proof tools and
explosion-proof equipment. Approach the release from upwind. Prevent entry into
sewers, water courses, basements or confined areas. Wash spillages into an
effluent treatment plant or proceed as follows. Contain and collect spillage with noncombustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth
and place in container for disposal according to local regulations. Dispose of via a
licensed waste disposal contractor. Contaminated absorbent material may pose the
same hazard as the spilt product.
5/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 United Kingdom (UK)
Code
: 00293378
SIGMADUR 188/520/550 HARDENER
: 10 February 2015
: Contain and collect spillage with non-combustible, absorbent material e.g. sand,
earth, vermiculite or diatomaceous earth and place in container for disposal
according to local regulations (see Section 13). Place in a suitable container. The
contaminated area should be cleaned immediately with a suitable decontaminant.
One possible (flammable) decontaminant comprises (by volume): water (45 parts),
ethanol or isopropyl alcohol (50 parts) and concentrated (d: 0,880) ammonia solution
(5 parts). A non-flammable alternative is sodium carbonate (5 parts) and water (95
parts). Add the same decontaminant to the remnants and let stand for several days
until no further reaction in an unsealed container. Once this stage is reached, close
container and dispose of according to local regulations (see section 13). Do not allow
to enter drains or watercourses. If the product contaminates lakes, rivers, or sewers,
inform the appropriate authorities in accordance with local regulations.
: See Section 1 for emergency contact information.
See Section 8 for information on appropriate personal protective equipment.
See Section 13 for additional waste treatment information.
6/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 United Kingdom (UK)
Code
: 00293378
SIGMADUR 188/520/550 HARDENER
: 10 February 2015
: Not available.
: Not available.
2-methoxy-1-methylethyl acetate
xylene
ethylbenzene
hexamethylene-di-isocyanate
Recommended monitoring
procedures
DNELs
English (GB)
7/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 United Kingdom (UK)
Code
: 00293378
SIGMADUR 188/520/550 HARDENER
: 10 February 2015
Type
Exposure
Value
Population
Effects
Systemic
Local
Systemic
Systemic
Local
Systemic
1.6 mg/kg
bw/day
Systemic
Systemic
Consumers
Systemic
PNECs
Product/ingredient name
xylene
Type
-
Compartment Detail
Fresh water
Marine water
Sewage Treatment
Plant
Fresh water sediment
Marine water sediment
Soil
Value
Method Detail
0.327 mg/l
0.327 mg/l
6.58 mg/l
: Use only with adequate ventilation. Use process enclosures, local exhaust
ventilation or other engineering controls to keep worker exposure to airborne
contaminants below any recommended or statutory limits. The engineering controls
also need to keep gas, vapour or dust concentrations below any lower explosive
limits. Use explosion-proof ventilation equipment.
Individual protection measures
Hygiene measures
: Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Contaminated work clothing should not be allowed out of the workplace. Wash
contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Eye/face protection
Skin protection
Hand protection
Gloves
English (GB)
8/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 United Kingdom (UK)
Code
: 00293378
SIGMADUR 188/520/550 HARDENER
: 10 February 2015
Respiratory protection
Environmental exposure
controls
: Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product. When there is a risk of ignition from static electricity,
wear anti-static protective clothing. For the greatest protection from static
discharges, clothing should include anti-static overalls, boots and gloves. Refer to
European Standard EN 1149 for further information on material and design
requirements and test methods.
: Appropriate footwear and any additional skin protection measures should be
selected based on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
: By spraying: air-fed respirator. By other operations than spraying, in well ventilated
areas, air-fed respirators could be replaced by a combination charcoal filter and
particulate filter mask. Respirator selection must be based on known or anticipated
exposure levels, the hazards of the product and the safe working limits of the
selected respirator.
: Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
: Liquid.
: Not available.
Odour
Odour threshold
pH
: Characteristic.
: Not available.
: Not available.
: Not available.
: >37.78C
Flash point
Evaporation rate
Material supports combustion.
: Not available.
: Yes.
: Not available.
: Lower: 0.91%
Upper: 1.74%
Vapour pressure
: Highest known value: 1.2 kPa (9.3 mm Hg) (at 20C) (ethylbenzene). Weighted
average: 0.68 kPa (5.1 mm Hg) (at 20C)
Vapour density
: Highest known value: 4.6 (Air = 1) (2-methoxy-1-methylethyl acetate). Weighted
average: 4.15 (Air = 1)
Relative density
: 1.07
Solubility(ies)
: Insoluble in the following materials: cold water.
Partition coefficient: n-octanol/ : Not available.
water
Auto-ignition temperature
: Not available.
Decomposition temperature
Viscosity
: Not available.
: Kinematic (40C): >0.21 cm 2/s
Explosive properties
: Not available.
English (GB)
9/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 United Kingdom (UK)
Code
: 00293378
SIGMADUR 188/520/550 HARDENER
: 10 February 2015
: Not available.
: No specific test data related to reactivity available for this product or its ingredients.
10.3 Possibility of
hazardous reactions
: Under normal conditions of storage and use, hazardous reactions will not occur.
: Keep away from: oxidising agents, strong alkalis, strong acids, amines, alcohols,
water. Uncontrolled exothermic reactions occur with amines and alcohols.
10.6 Hazardous
decomposition products
2-methoxy-1-methylethyl
acetate
xylene
ethylbenzene
hexamethylene-diisocyanate
Conclusion/Summary
Acute toxicity estimates
English (GB)
Result
Species
Dose
Exposure
18500 mg/m
1 hours
Rat
Rabbit
Rat - Female
Rabbit
0.39 mg/l
>2000 mg/kg
>2500 mg/kg
>5 g/kg
4 hours
-
LD50 Oral
LC50 Inhalation Gas.
LC50 Inhalation Vapour
LD50 Dermal
LD50 Oral
LC50 Inhalation Vapour
LD50 Dermal
LD50 Oral
LC50 Inhalation Dusts and mists
Rat
Rat
Rat
Rabbit
Rat
Rat
Rabbit
Rat
Rat
8532 mg/kg
6670 ppm
5000 ppm
>1.7 g/kg
4.3 g/kg
4000 ppm
17.8 g/kg
3.5 g/kg
124 mg/m
4 hours
4 hours
4 hours
4 hours
Rat
Rat
Rabbit
Rat
151 mg/m
22 ppm
0.57 g/kg
0.71 g/kg
4 hours
4 hours
-
: Not available.
10/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 United Kingdom (UK)
Code
: 00293378
SIGMADUR 188/520/550 HARDENER
: 10 February 2015
ATE value
Dermal
Inhalation (gases)
Inhalation (vapours)
Inhalation (dusts and mists)
Irritation/Corrosion
Conclusion/Summary
Sensitisation
Conclusion/Summary
Mutagenicity
11000 mg/kg
66700 ppm
254.1 mg/l
1.974 mg/l
: Not available.
: Not available.
Conclusion/Summary
Carcinogenicity
: Not available.
Conclusion/Summary
Reproductive toxicity
Conclusion/Summary
Teratogenicity
: Not available.
: Not available.
Conclusion/Summary
: Not available.
Specific target organ toxicity (single exposure)
Product/ingredient name
Category
Route of
exposure
Category 3
Not applicable.
hexamethylene-di-isocyanate
Category 3
Not applicable.
Target organs
Respiratory tract
irritation
Respiratory tract
irritation
: Not available.
English (GB)
11/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 United Kingdom (UK)
Code
: 00293378
SIGMADUR 188/520/550 HARDENER
: 10 February 2015
: Not available.
: Not available.
: Not available.
: Not available.
: Prolonged or repeated contact can defat the skin and lead to irritation, cracking and/
or dermatitis. Once sensitized, a severe allergic reaction may occur when
subsequently exposed to very low levels.
Carcinogenicity
: No known significant effects or critical hazards.
Mutagenicity
: No known significant effects or critical hazards.
Teratogenicity
: No known significant effects or critical hazards.
Developmental effects
: No known significant effects or critical hazards.
Fertility effects
: No known significant effects or critical hazards.
Other information
: Not available.
There are no data available on the mixture itself. The mixture has been assessed following the conventional method of
the Dangerous Preparations Directive 1999/45/EC and classified for toxicological hazards accordingly. See Sections 2
and 3 for details.
Exposure to component solvent vapour concentrations in excess of the stated occupational exposure limit may result in
adverse health effects such as mucous membrane and respiratory system irritation and adverse effects on the kidneys,
liver and central nervous system. Symptoms and signs include headache, dizziness, fatigue, muscular weakness,
drowsiness and, in extreme cases, loss of consciousness. Solvents may cause some of the above effects by absorption
through the skin.
If splashed in the eyes, the liquid may cause irritation and reversible damage.
Repeated or prolonged contact with the mixture may cause removal of natural fat from the skin, resulting in nonallergic contact dermatitis and absorption through the skin. This takes into account, where known, delayed and
immediate effects and also chronic effects of components from short-term and long-term exposure by oral, inhalation
and dermal routes of exposure and eye contact.
Based on the properties of the isocyanate components and considering toxicological data on similar mixtures, this
mixture may cause acute irritation and/or sensitisation of the respiratory system, leading to an asthmatic condition,
wheezing and tightness of the chest. Sensitised persons may subsequently show asthmatic symptoms when exposed
to atmospheric concentrations well below the OEL. Repeated exposure may lead to permanent respiratory disability.
Repeated or prolonged contact with irritants may cause dermatitis.
Contains Hexamethylene diisocyanate, oligomers, hexamethylene-di-isocyanate. May produce an allergic reaction.
English (GB)
12/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 United Kingdom (UK)
Code
: 00293378
SIGMADUR 188/520/550 HARDENER
: 10 February 2015
Result
Species
Exposure
Algae - scenedesmus
subspicatus
Daphnia - daphnia magna
Fish - Danio rerio (zebra fish)
Fish
72 hours
96 hours
48 hours
96 hours
96 hours
: Not available.
Aquatic half-life
Photolysis
Biodegradability
Not readily
Readily
Readily
LogPow
BCF
Potential
Hexamethylene diisocyanate,
oligomers
2-methoxy-1-methylethyl
acetate
xylene
ethylbenzene
hexamethylene-di-isocyanate
3.2
low
0.56
low
3.16
3.15
1.08
7.4 to 18.5
79.43
-
low
low
low
: Not available.
: Not available.
English (GB)
13/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 United Kingdom (UK)
Code
: 00293378
SIGMADUR 188/520/550 HARDENER
: 10 February 2015
Hazardous waste
: Yes.
European waste catalogue (EWC)
Waste code
08 01 11*
Packaging
Methods of disposal
Waste designation
waste paint and varnish containing organic solvents or other dangerous substances
: The generation of waste should be avoided or minimised wherever possible. Waste
packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible.
Type of packaging
Container
Special precautions
mixed packaging
: This material and its container must be disposed of in a safe way. Care should be
taken when handling emptied containers that have not been cleaned or rinsed out.
Empty containers or liners may retain some product residues. Vapour from product
residues may create a highly flammable or explosive atmosphere inside the
container. Do not cut, weld or grind used containers unless they have been cleaned
thoroughly internally. Avoid dispersal of spilt material and runoff and contact with
soil, waterways, drains and sewers.
ADN
IMDG
IATA
14.1 UN number
UN1263
UN1263
UN1263
UN1263
14.2 UN proper
shipping name
PAINT
PAINT
PAINT
PAINT
14.3 Transport
hazard class(es)
III
III
III
III
No.
No.
No.
No.
Not applicable.
Not applicable.
Not applicable.
Not applicable.
14.5
Environmental
hazards
Marine pollutant
substances
Additional information
ADR/RID
: None identified.
Tunnel code
: (D/E)
English (GB)
14/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 United Kingdom (UK)
Code
: 00293378
SIGMADUR 188/520/550 HARDENER
: 10 February 2015
: None identified.
: None identified.
: None identified.
: Transport within users premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in
the event of an accident or spillage.
H334
H335
English (GB)
15/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 United Kingdom (UK)
Code
: 00293378
SIGMADUR 188/520/550 HARDENER
: 10 February 2015
: H225
H226
H312
(dermal)
H315
H317
H319
H331
H332
H332
(inhalation)
History
Date of issue/ Date of
revision
Date of previous issue
Prepared by
Version
English (GB)
H334
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H335
May cause respiratory irritation.
: Acute Tox. 3, H331
ACUTE TOXICITY (inhalation) - Category 3
Acute Tox. 4, H312
ACUTE TOXICITY (dermal) - Category 4
Acute Tox. 4, H332
ACUTE TOXICITY (inhalation) - Category 4
Eye Irrit. 2, H319
SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 2
Flam. Liq. 2, H225
FLAMMABLE LIQUIDS - Category 2
Flam. Liq. 3, H226
FLAMMABLE LIQUIDS - Category 3
Resp. Sens. 1, H334
RESPIRATORY SENSITIZATION - Category 1
Skin Irrit. 2, H315
SKIN CORROSION/IRRITATION - Category 2
Skin Sens. 1, H317
SKIN SENSITIZATION - Category 1
STOT SE 3, H335
SPECIFIC TARGET ORGAN TOXICITY (SINGLE
EXPOSURE) (Respiratory tract irritation) - Category 3
: R11- Highly flammable.
R10- Flammable.
R23- Toxic by inhalation.
R20- Harmful by inhalation.
R20/21- Harmful by inhalation and in contact with skin.
R37- Irritating to respiratory system.
R38- Irritating to skin.
R36/37/38- Irritating to eyes, respiratory system and skin.
R43- May cause sensitisation by skin contact.
R42/43- May cause sensitisation by inhalation and skin contact.
: F - Highly flammable
T - Toxic
Xn - Harmful
Xi - Irritant
: 10 February 2015
: 15 February 2012
: EHS
: 4
United Kingdom (UK)
16/17
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 United Kingdom (UK)
Code
: 00293378
SIGMADUR 188/520/550 HARDENER
: 10 February 2015
English (GB)
17/17