Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SECTION
AV
CONTENTS
BASE AUDIO
Description ...............................................................24
Diagnosis Procedure ...............................................24
Description ...............................................................26
Diagnosis Procedure ...............................................26
Description ...............................................................28
Diagnosis Procedure ...............................................28
J
Description ...............................................................30
Diagnosis Procedure ...............................................30
Description ...............................................................34
Diagnosis Procedure ...............................................34
AV-1
2008 Altima
Description .............................................................. 67
PRECAUTION ............................................. 68
PRECAUTIONS ................................................. 68
Supplemental Restraint System (SRS) "AIR BAG"
and "SEAT BELT PRE-TENSIONER" .................... 68
PREPARATION ........................................... 69
PREPARATION ................................................. 69
Commercial Service Tools ...................................... 69
AV-2
2008 Altima
AV
AV-3
2008 Altima
Description .............................................................201
AV-4
2008 Altima
AV-5
2008 Altima
AV
Description .............................................................296
DTC Logic ..............................................................296
Diagnosis Procedure .............................................296
Description .............................................................298
DTC Logic ..............................................................298
Diagnosis Procedure .............................................298
Description .............................................................299
DTC Logic ..............................................................299
Diagnosis Procedure .............................................299
CD CHANGER .........................................................310
AV-6
2008 Altima
AV
AV-7
2008 Altima
AV-8
2008 Altima
BASIC INSPECTION
INFOID:0000000001830425
OVERALL SEQUENCE
C
ALNIA0182GB
DETAILED FLOW
AV
Get detailed information from the customer about the symptom (the condition and the environment when the
incident/malfunction occurred).
O
>> GO TO 2
Try to confirm the symptom described by the customer. Verify relation between the symptom and the condition
when the symptom is detected.
>> GO TO 3
AV-9
2008 Altima
5.FINAL CHECK
Refer to confirmed symptom in step 2, and make sure that the symptom is not detected.
Has the symptom been repaired?
YES >> Inspection End.
NO
>> GO TO 2
AV-10
2008 Altima
FUNCTION DIAGNOSIS
INFOID:0000000001830426
G
AWNIA0027GB
System Description
INFOID:0000000001830427
AUDIO SYSTEM
The audio system consists of the following components
Audio unit
Window antenna
Steering wheel audio control switches
Door speakers
Front tweeters
Rear speakers
When the audio system is on, radio signals are received by the window antenna. The audio unit then sends
audio signals to the door speakers, front tweeters and rear speakers.
Refer to Owner's Manual for audio system operating instructions.
AV
AV-11
2008 Altima
INFOID:0000000001830428
ALNIA0939GB
1.
2.
4.
5.
Door speaker
LH D3
RH D103
7.
6.
Component Description
INFOID:0000000001830429
Part name
Description
Audio unit
AV-12
2008 Altima
Description
Door speakers
Front tweeters
Rear speakers
Satellite antenna
AV
AV-13
2008 Altima
INFOID:0000000003221747
AWNIA0027GB
System Description
INFOID:0000000003221748
AUDIO SYSTEM
The audio system consists of the following components
Audio unit
Window antenna
Steering wheel audio control switches
Front door speakers
Tweeters
Rear speakers
When the audio system is on, radio signals are received by the window antenna. The audio unit then sends
audio signals to the front door speakers, tweeters and rear speakers.
Refer to Owner's Manual for audio system operating instructions.
AV-14
2008 Altima
INFOID:0000000003221749
ALNIA0073GB
1.
Tweeter LH M51
2.
4.
5.
6.
Rear speaker
RH B44
7.
Rear speaker
LH B26
8.
9.
Tweeter RH M52
Component Description
AV
INFOID:0000000003221750
P
Part name
Description
Audio unit
AV-15
2008 Altima
Description
Tweeters
Rear speakers
Satellite antenna
AV-16
2008 Altima
A
INFOID:0000000001830430
OPERATION PROCEDURE
1.
2.
3.
G
AWNIA0026ZZ
4.
ALNIA0019ZZ
Version Check
1. Press the AUDIO switch to enter version diagnostics. Software (audio software version) is displayed.
AV
ALNIA0020ZZ
AV-17
2008 Altima
[BASE AUDIO]
ALNIA0021ZZ
3.
ALNIA0022ZZ
4.
Press the AUDIO switch again to display the SDARS (satellite radio version).
ALNIA0023ZZ
ALNIA0024ZZ
AV-18
2008 Altima
[BASE AUDIO]
A
C
ALNIA0025ZZ
AV
AV-19
2008 Altima
COMPONENT DIAGNOSIS
POWER SUPPLY AND GROUND CIRCUIT (COUPE)
AUDIO UNIT
AUDIO UNIT : Diagnosis Procedure
INFOID:0000000001830431
1.CHECK FUSES
Check that the following fuses are not blown.
Unit
Terminals
Audio unit
Signal name
Fuse No.
19
Battery power
24
19
(-)
OFF
ACC
ON
19
Ground
Battery
voltage
Battery
voltage
Battery
voltage
Ground
0V
Battery
voltage
Battery
voltage
Terminal
M43
WKIA5769E
INFOID:0000000001830432
1.CHECK FUSES
Check that the following fuses are not blown.
Unit
Terminals
Signal name
Fuse No.
32
Battery power
24
36
19
AV-20
2008 Altima
Terminal
32
(-)
OFF
ACC
ON
Ground
Battery
voltage
Battery
voltage
Battery
voltage
0V
Battery
voltage
Battery
voltage
B57
36
[BASE AUDIO]
Ground
D
WKIA4539E
AV
AV-21
2008 Altima
INFOID:0000000003221751
1.CHECK FUSES
Check that the following fuses are not blown.
Unit
Terminals
Audio unit
Signal name
Fuse No.
19
Battery power
24
19
(-)
OFF
ACC
ON
19
Ground
Battery
voltage
Battery
voltage
Battery
voltage
Ground
0V
Battery
voltage
Battery
voltage
Terminal
M43
WKIA5769E
INFOID:0000000003221753
1.CHECK FUSES
Check that the following fuses are not blown.
Unit
Terminals
Signal name
Fuse No.
32
Battery power
24
36
19
AV-22
2008 Altima
[BASE AUDIO]
A
(+)
Connector
(-)
OFF
ACC
ON
32
Ground
Battery
voltage
Battery
voltage
Battery
voltage
36
Ground
0V
Battery
voltage
Battery
voltage
Terminal
B123
WKIA4539E
AV
AV-23
2008 Altima
INFOID:0000000001830433
The audio unit sends audio signals to the door speakers using the door speaker circuits.
Diagnosis Procedure
INFOID:0000000001830434
1.HARNESS CHECK
1.
2.
B
Terminal
Connector
2
M43
D3
3
11
D103
12
3.
Terminal
Continuity
1
2
Yes
1
2
Terminal
Continuity
Ground
No
2
A
3
11
AWNIA0031ZZ
12
AV-24
2008 Altima
(-)
Terminal
Terminal
Condition
[BASE AUDIO]
A
Reference
signal
C
M43
11
12
Receive
audio signal
D
SKIA0177E
G
AWNIA0032ZZ
AV
AV-25
2008 Altima
INFOID:0000000003188260
The audio unit sends audio signals to the front door speakers using the door speaker circuits.
Diagnosis Procedure
INFOID:0000000003188261
1.HARNESS CHECK
1.
2.
B
Terminal
Connector
2
M43
D3
3
11
D103
12
3.
Terminal
Continuity
1
2
Yes
1
2
Terminal
Continuity
Ground
No
2
A
3
11
AWNIA0031ZZ
12
AV-26
2008 Altima
(-)
Terminal
Terminal
Condition
[BASE AUDIO]
A
Reference
signal
C
M43
11
12
Receive
audio signal
D
SKIA0177E
G
AWNIA0032ZZ
AV
AV-27
2008 Altima
INFOID:0000000001830435
The audio unit sends audio signals to the front tweeters using the door speaker circuits.
Diagnosis Procedure
INFOID:0000000001830436
1.HARNESS CHECK
1.
2.
B
Terminal
Connector
2
M43
3
11
Continuity
M51
Yes
M52
12
3.
Terminal
Terminal
Continuity
2
M43
3
11
Ground
No
AWNIA0031ZZ
12
AV-28
2008 Altima
(-)
Terminal
Terminal
Condition
[BASE AUDIO]
A
Reference
signal
D
M43
11
12
Receive
audio signal
E
SKIA0177E
G
AWNIA0032ZZ
AV
AV-29
2008 Altima
TWEETER (SEDAN)
[BASE AUDIO]
TWEETER (SEDAN)
Description
INFOID:0000000003188262
The audio unit sends audio signals to the tweeters using the door speaker circuits.
Diagnosis Procedure
INFOID:0000000003188263
1.HARNESS CHECK
1.
2.
B
Terminal
Connector
2
M43
M51
3
11
M52
12
3.
Terminal
Continuity
1
2
Yes
1
2
Terminal
Continuity
2
M43
3
11
Ground
No
AWNIA0031ZZ
12
AV-30
2008 Altima
TWEETER (SEDAN)
< COMPONENT DIAGNOSIS >
1. Connect audio unit connector and tweeter connector.
2. Turn ignition switch to ACC.
3. Push POWER switch.
4. Check the signal between audio unit harness connector terminals with CONSULT-III or oscilloscope.
(+)
Connector
(-)
Terminal
Terminal
Condition
[BASE AUDIO]
A
Reference
signal
D
M43
11
12
Receive
audio signal
E
SKIA0177E
G
AWNIA0032ZZ
AV
AV-31
2008 Altima
REAR SPEAKER
[BASE AUDIO]
REAR SPEAKER
Description
INFOID:0000000001830437
The audio unit sends audio signals to the rear speakers using the rear speaker circuits.
Diagnosis Procedure
INFOID:0000000001830438
1.HARNESS CHECK
1.
2.
B
Terminal
Connector
4
M43
B26
5
13
B44
14
3.
Terminal
Continuity
1
2
Yes
1
2
Terminal
Continuity
Ground
No
4
M43
5
13
AWNIA0033ZZ
14
AV-32
2008 Altima
REAR SPEAKER
< COMPONENT DIAGNOSIS >
1. Connect audio unit connector and rear tweeter connector.
2. Turn ignition switch to ACC.
3. Push POWER switch.
4. Check the signal between audio unit harness connector terminals with CONSULT-III or oscilloscope.
(+)
Connector
(-)
Terminal
4
Terminal
Condition
[BASE AUDIO]
A
Reference
signal
D
M43
13
14
Receive
audio signal
E
SKIA0177E
G
AWNIA0034ZZ
AV
AV-33
2008 Altima
STEERING SWITCH
[BASE AUDIO]
STEERING SWITCH
Description
INFOID:0000000001830439
When one of the steering wheel audio control switches is pushed, the resistance in steering switch circuit
changes depending on which button is pushed.
Diagnosis Procedure
INFOID:0000000001830440
Terminal
15
17
14
Signal name
Resistance
()
(Approx.)
Condition
Seek (down)
165
Volume (down)
487
Seek (up)
165
Source
Volume (up)
AWNIA0035ZZ
487
2.CHECK HARNESS
1.
2.
3.
B
Terminal
Connector
6
M43
Continuity
31
16
M30
15
4.
Terminal
24
Yes
AWNIA0036ZZ
33
Check continuity between audio unit connector M43 (A) and ground.
A
Connector
Terminal
Continuity
Ground
No
6
M43
15
16
AV-34
2008 Altima
STEERING SWITCH
< COMPONENT DIAGNOSIS >
1. Disconnect spiral cable connector M88.
2. Check continuity between spiral cable harness connector M30
(A) and M88 (B).
A
Connector
B
Terminal
Connector
24
M30
31
33
Terminal
[BASE AUDIO]
A
Continuity
14
M88
15
Yes
17
ALNIA0931GB
AV
AV-35
2008 Altima
INFOID:0000000001830441
Communication signals are exchanged between the audio unit and satellite radio tuner using the communication circuits.
INFOID:0000000001830442
1.CHECK HARNESS - 1
1.
2.
3.
4.
2.CHECK HARNESS - 2
1.
2.
AWNIA0039ZZ
3.CHECK HARNESS - 3
1.
2.
AWNIA0040ZZ
AV-36
2008 Altima
[BASE AUDIO]
A
28 - Ground
C
D
WKIA4544E
SKIB3825E
29 - Ground
H
I
WKIA4545E
SKIB3824E
30 - Ground
AV
WKIA4546E
SKIB3826E
AV-37
2008 Altima
INFOID:0000000003221754
Communication signals are exchanged between the audio unit and satellite radio tuner using the communication circuits.
INFOID:0000000003221756
1.CHECK HARNESS - 1
1.
2.
3.
4.
2.CHECK HARNESS - 2
1.
2.
AWNIA0039ZZ
3.CHECK HARNESS - 3
1.
2.
AWNIA0040ZZ
AV-38
2008 Altima
[BASE AUDIO]
A
28 - Ground
C
D
WKIA4544E
SKIB3825E
29 - Ground
H
I
WKIA4545E
SKIB3824E
30 - Ground
AV
WKIA4546E
SKIB3826E
AV-39
2008 Altima
INFOID:0000000001830443
Left and right channel audio signals are supplied from the satellite radio tuner to the audio unit through the
sound signal circuits.
INFOID:0000000001830444
LEFT CHANNEL
1.CHECK HARNESS
1.
2.
3.
B
Terminal
B57
4.
Connector
21
31
M45
22
Continuity
Terminal
Yes
32
AWNIA0041ZZ
Check continuity between satellite radio tuner (factory installed) connector B57 (A) and ground.
A
Connector
B57
Continuity
Ground
No
Terminal
21
22
WKIA4548E
SKIB3609E
RIGHT CHANNEL
1.CHECK HARNESS
Revision: July 2007
AV-40
2008 Altima
B
Terminal
B57
4.
Connector
23
M45
24
Terminal
[BASE AUDIO]
A
Continuity
33
Yes
34
AWNIA0042ZZ
Check continuity between satellite radio tuner (factory installed) connector B57 (A) and ground.
A
Connector
B57
Continuity
Ground
No
Terminal
23
24
23 - 24
J
K
WKIA4550E
SKIB3609E
AV
AV-41
2008 Altima
INFOID:0000000003221757
Left and right channel audio signals are supplied from the satellite radio tuner to the audio unit through the
sound signal circuits.
INFOID:0000000003221759
LEFT CHANNEL
1.CHECK HARNESS
1.
2.
3.
B
Terminal
B123
4.
Connector
21
31
M45
22
Continuity
Terminal
Yes
32
AWNIA0041ZZ
Check continuity between satellite radio tuner (factory installed) connector B123 (A) and ground.
A
Connector
B123
Continuity
Ground
No
Terminal
21
22
WKIA4548E
SKIB3609E
RIGHT CHANNEL
1.CHECK HARNESS
Revision: July 2007
AV-42
2008 Altima
B
Terminal
B123
4.
Connector
23
M45
24
Terminal
[BASE AUDIO]
A
Continuity
33
Yes
34
AWNIA0042ZZ
Check continuity between satellite radio tuner (factory installed) connector B123 (A) and ground.
A
Connector
B123
Continuity
Ground
No
Terminal
23
24
23 - 24
J
K
WKIA4550E
SKIB3609E
AV
AV-43
2008 Altima
ECU DIAGNOSIS
AUDIO UNIT (COUPE)
Reference Value
INFOID:0000000001830445
TERMINAL LAYOUT
AWNIA0043ZZ
PHYSICAL VALUES
Terminal
(Wire color)
Item
2
(W)
3
(B)
Audio sound
signal front LH
Signal input/output
Output
Condition
Reference value
Ignition
switch
Operation
ON
SKIA0177E
4
(O/B)
5
(W/R)
Audio sound
signal rear LH
Output
ON
SKIA0177E
6
(W/G)
Ground
7
(V/Y)
Ground
9
(R/L)
8
(R/Y)
Remote control A
Input
ON
Press SOURCE
switch
Approx. 0.0V
Press SEEK UP
switch
Approx. 0.75V
Press VOL UP
switch
Approx. 2.0V
Approx. 5.0V
ACC signal
Input
ON
Ignition switch
ACC or ON
Battery voltage
ILL signal
Input
ON
Headlamps ON
Battery voltage
AV-44
2008 Altima
Item
Signal input/output
Condition
Ignition
switch
A
Reference value
Operation
11
(G/W)
12
(BR)
Audio sound
signal front
RH
Output
ON
SKIA0177E
E
13
(L)
14
(B/W)
Audio sound
signal rear RH
Output
ON
F
SKIA0177E
15
(L/B)
16
(GR/L)
19
(Y/R)
Ground
Ground
Remote control B
Battery power
Input
Input
Input
ON
Press SEEK
DOWN switch
Approx. 0.75V
Approx. 2.0V
Approx. 5.0V
Battery voltage
J
32
(Y/L)
31
(W/L)
Audio left
channel
sound signal
from satellite
radio tuner
Input
ON
SKIA0177E
34
(BR/L)
33
(Y/G)
Audio right
channel
sound signal
from satellite
radio tuner
Input
ON
AV
SKIA0177E
35
36
Shield ground
(audio signal)
Shield ground
(data)
0V
0V
AV-45
2008 Altima
Item
Signal input/output
Condition
Reference value
Ignition
switch
Operation
38
(R)
Ground
Satellite radio
tuner request
to audio unit
Input
39
(G)
Ground
Audio RX
Input
5V
ON
SKIA4403E
40
(B)
Ground
Audio TX
Output
SKIA4402E
75
(B)
Ground
Antenna amp
power supply
Output
ON
Battery voltage
76
(B)
Ground
Main antenna
Input
ON
AV-46
2008 Altima
INFOID:0000000001830446
AV
AWNWA0018GB
AV-47
2008 Altima
AWNIA0329GB
AV-48
2008 Altima
AV
O
ALNIA0028GB
AV-49
2008 Altima
AWNIA0353GB
AV-50
2008 Altima
AV
O
AWNIA0330GB
AV-51
2008 Altima
AWNIA0331GB
AV-52
2008 Altima
AV
O
AWNIA0354GB
AV-53
2008 Altima
INFOID:0000000003229330
TERMINAL LAYOUT
AWNIA0043ZZ
PHYSICAL VALUES
Terminal
(Wire color)
Item
2
(W)
3
(B)
Audio sound
signal front LH
Signal input/output
Output
Condition
Reference value
Ignition
switch
Operation
ON
SKIA0177E
4
(O/B)
5
(W/R)
Audio sound
signal rear LH
Output
ON
SKIA0177E
6
(W/G)
Ground
7
(V/Y)
Ground
9
(R/L)
11
(G/W)
Remote control A
Input
ON
Press SOURCE
switch
Approx. 0.0V
Press SEEK UP
switch
Approx. 0.75V
Press VOL UP
switch
Approx. 2.0V
Approx. 5.0V
ACC signal
Input
ON
Ignition switch
ACC or ON
Battery voltage
8
(R/Y)
ILL signal
Input
ON
Headlamps ON
Battery voltage
12
(BR)
Audio sound
signal front
RH
Output
ON
SKIA0177E
AV-54
2008 Altima
Item
Signal input/output
Condition
Ignition
switch
A
Reference value
Operation
13
(L)
14
(B/W)
Audio sound
signal rear RH
Output
ON
SKIA0177E
15
(L/B)
16
(GR/L)
19
(Y/R)
32
(Y/L)
Ground
Ground
31
(W/L)
Remote control B
Battery power
Audio left
channel
sound signal
from satellite
radio tuner
Input
Input
Input
Press SEEK
DOWN switch
Approx. 0.75V
Approx. 2.0V
Approx. 5.0V
Battery voltage
ON
ON
H
Input
I
SKIA0177E
J
34
(BR/L)
33
(Y/G)
Audio right
channel
sound signal
from satellite
radio tuner
Input
ON
SKIA0177E
35
Shield ground
(audio signal)
0V
36
Shield ground
(data)
0V
AV
AV-55
2008 Altima
Item
Signal input/output
Condition
Reference value
Ignition
switch
Operation
38
(R)
Ground
Satellite radio
tuner request
to audio unit
Input
39
(G)
Ground
Audio RX
Input
5V
ON
SKIA4403E
40
(B)
Ground
Audio TX
Output
SKIA4402E
75
(B)
Ground
Antenna amp
power supply
Output
ON
Battery voltage
76
(B)
Ground
Main antenna
Input
ON
AV-56
2008 Altima
INFOID:0000000003221764
AV
AWNWA0125GB
AV-57
2008 Altima
ALNIA0027GB
AV-58
2008 Altima
AV
O
ALNIA0028GB
AV-59
2008 Altima
ALNIA0029GB
AV-60
2008 Altima
AV
O
ALNIA0075GB
AV-61
2008 Altima
ALNIA0608GB
AV-62
2008 Altima
AV
O
ALNIA0077GB
AV-63
2008 Altima
INFOID:0000000001830447
TERMINAL LAYOUT
LKIA0735E
PHYSICAL VALUES
Terminal
(Wire color)
Item
22
(Y/L)
21
(W/L)
Audio signal LH
Signal
input/
output
Output
Condition
Ignition
switch
ON
Operation
Voltage
(approx.)
SKIB3609E
24
(BR/L)
23
(Y/G)
25
26
28
(R/L)
Audio signal RH
Output
ON
Shield
Data ground
ON
Approx. 0 V
Ground
REQ1
(SAT-AUDIO)
Output
ON
SKIB3609E
SKIB3825E
29
(R/W)
Ground
Communication signal
(SAT-AUDIO)
Output
ON
SKIB3824E
AV-64
2008 Altima
Item
Signal
input/
output
Condition
Ignition
switch
Operation
Voltage
(approx.)
30
(B)
Ground
Communication signal
(AUDIO-SAT)
Input
ON
SKIB3826E
32
(Y/R)
36
(GR/W)
37
(B)
OFF
Ground
ACC power supply
Antenna signal
Input
Battery voltage
ACC
AV
AV-65
2008 Altima
AUDIO SYSTEM
[BASE AUDIO]
SYMPTOM DIAGNOSIS
AUDIO SYSTEM
AUDIO UNIT
AUDIO UNIT : Symptom Table
INFOID:0000000001830449
Symptom
Possible cause
Reference page
Inoperative
AV-20
AV-70
AV-34
AV-70
AV-20
AV-70
Door speaker
Front tweeter
Rear speaker
AV-24
AV-28
AV-32
CD
CD : Symptom Table
INFOID:0000000001830450
Symptom
Possible cause
Reference page
CD cannot be inserted.
CD cannot be ejected.
The CD cannot be played.
Audio unit
AV-70
INFOID:0000000001830451
Possible cause
Reference page
Inoperative
AV-20
AV-36
AV-214
AV-40
AV-40
AV-214
AV-66
2008 Altima
Description
INFOID:0000000001830452
The majority of the audio concerns are the result of outside causes (bad CD, electromagnetic interference,
etc.).
NOISE
The following noise results from variations in field strength, such as fading noise and multi-path noise, or
external noise from trains and other sources. It is not a malfunction.
Fading noise: This noise occurs because of variations in the field strength in a narrow range due to mountains or buildings blocking the signal.
Multi-path noise: This noise results from the waves sent directly from the broadcast station arriving at the
antenna at a different time from the waves which reflect off mountains or buildings.
The vehicle itself can be a source of noise if noise prevention parts or electrical equipment is malfunctioning.
Check if noise is caused and/or changed by engine speed, ignition switch turned to each position, and operation of each piece of electrical equipment, and determine the cause.
NOTE:
The source of the noise can be found easily by listening to the noise while removing the fuses of electrical
components, one by one.
Possible cause
The occurrence of the noise is linked with the operation of the fuel pump.
Noise only occurs when various
electrical components are operating.
Ignition components
H
Fuel pump condenser
A cracking or snapping sound occurs while the vehicle is being driven, especially when
it is vibrating excessively.
AV
AV-67
2008 Altima
PRECAUTIONS
[BASE AUDIO]
PRECAUTION
PRECAUTIONS
Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
INFOID:0000000001345951
The Supplemental Restraint System such as AIR BAG and SEAT BELT PRE-TENSIONER, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SR and SB section of this Service Manual.
WARNING:
To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness connectors.
AV-68
2008 Altima
PREPARATION
[BASE AUDIO]
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000001345952
Tool name
Description
Power tool
E
PBIC0191E
AV
AV-69
2008 Altima
AUDIO UNIT
[BASE AUDIO]
ON-VEHICLE REPAIR
AUDIO UNIT
Removal and Installation
INFOID:0000000001345953
REMOVAL
1.
2.
ALNIA0915ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-70
2008 Altima
FRONT TWEETER
[BASE AUDIO]
FRONT TWEETER
INFOID:0000000001345954
REMOVAL
1.
2.
3.
Remove the front pillar finisher. Refer to INT-19, "Removal and Installation".
Remove tweeter speaker grille. Refer to IP-11, "Removal and Installation".
Remove the tweeter speaker screws (A), disconnect the tweeter
speaker connector and remove the tweeter speaker (1).
F
ALNIA0050ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV
AV-71
2008 Altima
INFOID:0000000001345955
REMOVAL
1.
2.
Remove the front door finisher. Refer to INT-11, "Removal and Installation".
Remove the front door speaker screws (A), then disconnect the
front door speaker connector and remove the front door speaker
(1).
ALNIA0040ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-72
2008 Altima
REAR SPEAKER
[BASE AUDIO]
REAR SPEAKER
INFOID:0000000001345956
REMOVAL
1.
2.
Remove the trunk front finisher. Refer to INT-22, "Removal and Installation".
Remove the rear speaker screws (A), then disconnect the rear
speaker connector (B) and remove the rear speaker (1).
ALNIA0916ZZ
INSTALLATION
Installation is in the reverse order of removal.
G
INFOID:0000000003110979
REMOVAL
1.
2.
Remove the rear parcel shelf finisher. Refer to INT-36, "Removal and Installation".
Remove the rear speaker screws (A), then disconnect the rear
speaker and remove the rear speaker (1).
K
ALNIA0042ZZ
INSTALLATION
Installation is in the reverse order of removal.
M
AV
AV-73
2008 Altima
STEERING SWITCH
[BASE AUDIO]
STEERING SWITCH
Removal and Installation
INFOID:0000000003110836
REMOVAL
1.
2.
Remove the driver airbag module. Refer to SR-4, "Removal and Installation".
Remove the steering wheel switch assembly screws (A), then
remove the steering wheel switches (1).
ALNIA0045ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-74
2008 Altima
ANTENNA AMP.
[BASE AUDIO]
ANTENNA AMP.
INFOID:0000000001345957
REMOVAL
1.
2.
Remove the rear pillar finisher RH. Refer to INT-14, "Removal and Installation".
Detach the antenna amp harness clip (B), disconnect the
antenna amp connectors (A), remove the antenna amp screw
(C) and remove the antenna amp (1).
ALNIA0917ZZ
INSTALLATION
Installation is in the reverse order of removal.
G
INFOID:0000000003110980
REMOVAL
1.
2.
3.
Remove the rear pillar finisher RH. Refer to INT-19, "Removal and Installation".
Partially remove the side curtain air bag module RH to gain access to the antenna amp. Refer to SR-10,
"Removal and Installation".
Detach the antenna amp harness clip (A), disconnect the
antenna amp connectors (B), remove the antenna amp screw
(C) and remove the antenna amp (1).
L
ALNIA0043ZZ
INSTALLATION
AV-75
2008 Altima
INFOID:0000000001345958
AWNIA0748ZZ
1.
2.
3.
Audio unit
4.
Satellite antenna
5.
6.
7.
Window Antenna
8.
Antenna amp.
9.
INFOID:0000000001345959
ELEMENT CHECK
AV-76
2008 Altima
[BASE AUDIO]
A
C
SEL250I
G
SEL122R
2.
AV
SEL252I
3.
SEL253I
AV-77
2008 Altima
[BASE AUDIO]
REPAIRING PROCEDURE
1.
2.
3.
Wipe broken heat wire and its surrounding area clean with a
cloth dampened in alcohol.
Apply a small amount of conductive silver composition to tip of
drawing pen.
Shake silver composition container before use.
Place ruler on glass along broken line. Deposit conductive silver
composition on break with drawing pen. Slightly overlap existing
heat wire on both sides [preferably 5 mm (0.20 in)] of the break.
PIIA0215E
4.
After repair has been completed, check repaired wire for continuity. This check should be conducted 10 minutes after silver
composition is deposited.
Do not touch repaired area while test is being conducted.
SEL012D
5.
SEL013D
AV-78
2008 Altima
Location of Antenna
INFOID:0000000003222314
ALNIA0044ZZ
1.
2.
3.
Audio unit
4.
Satellite antenna
5.
6.
7.
Window Antenna
8.
Antenna amp.
9.
M
INFOID:0000000003222315
AV
ELEMENT CHECK
1.
SEL250I
AV-79
2008 Altima
[BASE AUDIO]
SEL122R
2.
SEL252I
3.
SEL253I
REPAIR EQUIPMENT
REPAIRING PROCEDURE
AV-80
2008 Altima
[BASE AUDIO]
A
C
PIIA0215E
4.
After repair has been completed, check repaired wire for continuity. This check should be conducted 10 minutes after silver
composition is deposited.
Do not touch repaired area while test is being conducted.
G
SEL012D
5.
K
SEL013D
AV
AV-81
2008 Altima
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000001830598
OVERALL SEQUENCE
ALNIA0182GB
DETAILED FLOW
AV-82
2008 Altima
>> GO TO 5
5.FINAL CHECK
D
Refer to confirmed symptom in step 2, and make sure that the symptom is not detected.
Was the repair confirmed?
YES >> INSPECTION END.
NO
>> GO TO 2
AV
AV-83
2008 Altima
FUNCTION DIAGNOSIS
AUDIO SYSTEM (COUPE)
System Diagram
INFOID:0000000001830599
ALNIA0937GB
System Description
INFOID:0000000001830600
AUDIO SYSTEM
The audio system consists of the following components
Audio unit
BOSE speaker amp.
Window antenna
Steering wheel audio control switches
Door speakers
Front tweeters
Center speaker
Rear tweeters
Rear subwoofers
When the audio system is on, radio signals are received by the window antenna. The audio unit then sends
audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio signals before sending
them to the door speakers, front tweeters, center speaker, rear tweeters and rear subwoofers.
Refer to Owner's Manual for audio system operating instructions.
AV-84
2008 Altima
INFOID:0000000001830601
AV
P
ALNIA0940GB
1.
2.
3.
4.
5.
6.
AV-85
2008 Altima
Door speaker
LH D3
RH D103
8.
Rear subwoofer
LH B25
RH B47
9.
Rear tweeter
LH B16
RH B100
13. Microphone R7
Component Description
INFOID:0000000001830602
Part name
Description
Audio unit
Receives power (amp ON) and audio signals from audio unit, and outputs audio signals to each speaker.
Door speakers
Front tweeters
Center speaker
Rear tweeters
Rear subwoofers
Satellite antenna
AV-86
2008 Altima
System Diagram
INFOID:0000000003222156
F
AWNIA0028GB
System Description
INFOID:0000000003222157
AUDIO SYSTEM
The audio system consists of the following components
Audio unit
Window antenna
BOSE speaker amp.
Steering wheel audio control switches
Front door speakers
Tweeters
Center speaker
Rear door speakers
Rear subwoofers
When the audio system is on, radio signals are received by the window antenna. The audio unit then sends
audio signals to BOSE speaker amp. The Bose speaker amp. sends the audio signals to the front door speakers, tweeters, center speaker, rear door speakers and rear subwoofers.
Refer to Owner's Manual for audio system operating instructions.
AV-87
2008 Altima
INFOID:0000000003222158
AWNIA0746ZZ
1.
Tweeter LH M51
2.
Tweeter RH M52
4.
5.
AV-88
6.
2008 Altima
8.
11.
14. Microphone R7
9.
Component Description
INFOID:0000000003222159
C
Part name
Description
Audio unit
Receives power (amp ON) and audio signals from audio unit, and outputs audio signals to each speaker.
Tweeters
Center speaker
Rear subwoofers
Satellite antenna
AV
AV-89
2008 Altima
INFOID:0000000001830603
AWNIA0029GB
System Description
INFOID:0000000001830604
Refer to the owner's manual for Bluetooth telephone system operating instructions.
NOTE:
Cellular telephones must have their wireless connection set up (paired) before using the Bluetooth telephone
system.
Bluetooth telephone system allows users who have a Bluetooth cellular telephone to make a wireless connection between their cellular telephone and the Bluetooth control unit. Hands-free cellular telephone calls can be
sent and received. Personal memos can be created using the Nissan Voice Recognition system. Some Bluetooth cellular telephones may not be recognized by the Bluetooth control unit. When a cellular telephone or
the Bluetooth control unit is replaced, the telephone must be paired with the Bluetooth control unit. Different
cellular telephones may have different pairing procedures. Refer to the cellular telephone operating manual.
MICROPHONE
The microphone is located in the roof console assembly. The microphone sends a signal to the Bluetooth control unit. The microphone can be actively tested during self-diagnosis.
AUDIO UNIT
The audio unit receives signals from the Bluetooth control unit and sends audio signals to the speakers.
AV-90
2008 Altima
INFOID:0000000003222326
AV
P
ALNIA0940GB
1.
2.
3.
4.
5.
6.
AV-91
2008 Altima
Door speaker
LH D3
RH D103
8.
Rear subwoofer
LH B25
RH B47
9.
Rear tweeter
LH B16
RH B100
13. Microphone R7
Component Description
INFOID:0000000001830606
Part name
Description
Audio unit
Inputs power (amp ON) and sound signal from audio unit, and outputs sound
signal to each speaker.
Door speaker
Front tweeter
Receives telephone voice and voice guidance signals from BOSE speaker
amp.
Center speaker
Steering wheel audio control switches
Microphone
Bluetooth antenna
AV-92
2008 Altima
A
INFOID:0000000003222320
D
AWNIA0029GB
System Description
INFOID:0000000003222321
Refer to the owner's manual for Bluetooth telephone system operating instructions.
NOTE:
Cellular telephones must have their wireless connection set up (paired) before using the Bluetooth telephone
system.
Bluetooth telephone system allows users who have a Bluetooth cellular telephone to make a wireless connection between their cellular telephone and the Bluetooth control unit. Hands-free cellular telephone calls can be
sent and received. Personal memos can be created using the Nissan Voice Recognition system. Some Bluetooth cellular telephones may not be recognized by the Bluetooth control unit. When a cellular telephone or
the Bluetooth control unit is replaced, the telephone must be paired with the Bluetooth control unit. Different
cellular telephones may have different pairing procedures. Refer to the cellular telephone operating manual.
MICROPHONE
The microphone is located in the roof console assembly. The microphone sends a signal to the Bluetooth con- AV
trol unit. The microphone can be actively tested during self-diagnosis.
AUDIO UNIT
The audio unit receives signals from the Bluetooth control unit and sends audio signals to the speakers.
AV-93
2008 Altima
INFOID:0000000003222327
AWNIA0746ZZ
1.
Tweeter LH M51
2.
Tweeter RH M52
4.
5.
AV-94
6.
2008 Altima
8.
11.
14. Microphone R7
9.
Component Description
INFOID:0000000003222325
C
Part name
Description
Audio unit
Inputs power (amp ON) and sound signal from audio unit, and outputs sound
signal to each speaker.
Receives telephone voice and voice guidance signals from BOSE speaker
amp.
Center speaker
Microphone
Bluetooth antenna
AV
AV-95
2008 Altima
INFOID:0000000001830607
OPERATION PROCEDURE
1.
2.
3.
AWNIA0026ZZ
4.
ALNIA0019ZZ
Version Check
1. Press the AUDIO switch to enter version diagnostics. Software (audio software version) is displayed.
ALNIA0020ZZ
AV-96
2008 Altima
C
ALNIA0021ZZ
3.
G
ALNIA0022ZZ
4.
Press the AUDIO switch again to display the SDARS (satellite radio version).
K
ALNIA0023ZZ
AV
O
ALNIA0024ZZ
AV-97
2008 Altima
ALNIA0025ZZ
AV-98
2008 Altima
A
INFOID:0000000001830608
The Bluetooth control unit has two diagnostic checks. The first diagnostic check is performed automatically
every ignition cycle during control unit initialization. The second diagnostic check is performed by the technician using the steering wheel audio control switches prior to trouble diagnosis.
OPERATION PROCEDURE
1.
2.
3.
AWNIA0093GB
4.
5.
6.
7.
8.
While the prompt is playing, press and hold the steering wheel
audio control switch END button until you hear the Diagnostics
mode prompt. The Bluetooth system will sound a 5 second
beep.
While the beep is sounding, press and hold the steering wheel
audio control switch END button again until you hear prompts.
The Bluetooth system has now entered into the diagnostic
mode. Results of the diagnostic checks will be verbalized to the
technician. Refer to AV-99, "Work Flow".
After the failure records are reported, an interactive microphone
test will be performed. Follow the voice prompt. If the microAWNIA0094GB
phone test fails refer to AV-99, "Work Flow".
Self-diagnosis mode is complete when the voice prompt says All diagnostic functions completed.
Work Flow
INFOID:0000000001830609
AV
Failure Message
Internal failure
Bluetooth antenna open
Action
Replace Bluetooth control unit. For coupe, refer to AV-227, "Removal and Installation - Coupe". For sedan, refer to AV-227, "Removal and Installation - Sedan".
1.
2.
Check steering wheel audio control switches. Refer to AV-134, "Diagnosis Procedure".
1.
2.
AV-99
2008 Altima
COMPONENT DIAGNOSIS
POWER SUPPLY AND GROUND CIRCUIT (COUPE)
AUDIO UNIT
AUDIO UNIT : Diagnosis Procedure
INFOID:0000000003188232
1.CHECK FUSES
Check that the following fuses are not blown.
Unit
Terminals
Audio unit
Signal name
Fuse No.
19
Battery power
24
19
(-)
OFF
ACC
ON
19
Ground
Battery
voltage
Battery
voltage
Battery
voltage
Ground
0V
Battery
voltage
Battery
voltage
Terminal
M43
WKIA5769E
INFOID:0000000001830611
1.CHECK FUSE
Check for blown fuses.
Unit
Terminals
50
51
Signal name
Battery power
Fuse No.
25
26
AV-100
2008 Altima
(+)
Connector
(-)
Voltage (approx.)
Ground
Battery voltage
Terminal
50
B122
51
ALNIA0128ZZ
(-)
Continuity
Ground
Yes
Terminal
47
B122
52
ALNIA0129ZZ
INFOID:0000000003188233
1.CHECK FUSES
Check that the following fuses are not blown.
Unit
Terminals
Signal name
Fuse No.
32
Battery power
24
36
19
AV
AV-101
2008 Altima
(-)
OFF
ACC
ON
32
Ground
Battery
voltage
Battery
voltage
Battery
voltage
36
Ground
0V
Battery
voltage
Battery
voltage
Terminal
B57
WKIA4539E
INFOID:0000000001830613
1.CHECK FUSE
Check that the following fuses of the Bluetooth control unit are not blown.
Power source
Fuse No.
Battery
24
19
Terminal
(-)
1
B55
Ignition switch
position
Value (Approx.)
OFF
Ground
ACC
Battery voltage
ON
WKIA4389E
AV-102
2008 Altima
(+)
Connector
Terminal
4
B55
24
(-)
Continuity
Ground
Yes
C
ALNIA0130ZZ
MICROPHONE
INFOID:0000000003188238
Terminal
(-)
R7
Ground
Value (Approx.)
ON
5V
I
WKIA5796E
4.
Continuity
Continuity
M
ALNIA0132ZZ
AV
AV-103
2008 Altima
Terminal
(-)
Value (Approx.)
B55
29
Ground
ON
5V
ALNIA0133ZZ
Continuity
Microphone ground
Is continuity present?
YES >> Inspection End.
NO
>> Repair harness or connector.
ALNIA0170ZZ
AV-104
2008 Altima
AUDIO UNIT
AUDIO UNIT : Diagnosis Procedure
INFOID:0000000003222162
1.CHECK FUSES
Check that the following fuses are not blown.
Unit
Terminals
Audio unit
Signal name
Fuse No.
19
Battery power
24
19
(-)
OFF
ACC
ON
19
Ground
Battery
voltage
Battery
voltage
Battery
voltage
Ground
0V
Battery
voltage
Battery
voltage
Terminal
M43
I
WKIA5769E
INFOID:0000000003222163
1.CHECK FUSE
AV
Terminals
50
51
Signal name
Battery power
Fuse No.
25
26
AV-105
2008 Altima
(-)
Voltage (approx.)
Ground
Battery voltage
Terminal
50
B122
51
ALNIA0128ZZ
47
B122
(-)
Continuity
Ground
Yes
Terminal
52
ALNIA0129ZZ
INFOID:0000000003222166
1.CHECK FUSES
Check that the following fuses are not blown.
Unit
Terminals
Signal name
Fuse No.
32
Battery power
24
36
19
AV-106
2008 Altima
(-)
OFF
ACC
ON
32
Ground
Battery
voltage
Battery
voltage
Battery
voltage
36
Ground
0V
Battery
voltage
Battery
voltage
Terminal
B123
WKIA4539E
INFOID:0000000003222169
1.CHECK FUSE
Check that the following fuses of the Bluetooth control unit are not blown.
Power source
Fuse No.
Battery
24
19
Terminal
(-)
1
B126
Ignition switch
position
Value (Approx.)
Battery voltage
AV
OFF
Ground
ACC
ON
WKIA4389E
AV-107
2008 Altima
Terminal
4
B126
24
(-)
Continuity
Ground
Yes
ALNIA0130ZZ
MICROPHONE
MICROPHONE : Diagnosis Procedure
INFOID:0000000003222171
Terminal
(-)
Value (Approx.)
R7
Ground
ON
5V
4.
Continuity
Continuity
ALNIA0132ZZ
AV-108
2008 Altima
(+)
Connector
Terminal
(-)
B126
29
Ground
ON
Value (Approx.)
5V
C
ALNIA0133ZZ
Continuity
Microphone ground
Is continuity present?
YES >> Inspection End.
NO
>> Repair harness or connector.
H
ALNIA0170ZZ
AV
AV-109
2008 Altima
INFOID:0000000001830615
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio
signals before sending them to the door speakers using the audio signal circuits.
Diagnosis Procedure
INFOID:0000000001830616
1.HARNESS CHECK
1.
2.
B
Terminal
Connector
58
B121
D3
59
71
D103
72
3.
Continuity
Terminal
1
2
1
Yes
Check continuity between BOSE speaker amp. harness connector B121 (A) and ground.
A
Connector
Terminal
Continuity
Ground
No
58
B121
59
71
ALNIA0134ZZ
72
AV-110
2008 Altima
Connector
(+)
(-)
58
59
Reference
signal
Condition
D
B121
71
Receive
audio signal
72
E
SKIA0177E
G
ALNIA0135ZZ
3.HARNESS CHECK
1.
2.
A
Connector
B
Terminal
Connector
Terminal
2
M43
Continuity
75
76
B121
11
73
12
3.
Yes
74
A
Connector
Terminal
Continuity
Ground
No
2
M43
3
11
AV
ALNIA0136ZZ
12
AV-111
2008 Altima
Connector
M43
Terminals
(+)
(-)
11
12
Condition
Reference
signal
Receive
audio signal
SKIA0177E
AV-112
WKIA5352E
2008 Altima
Description
INFOID:0000000003188239
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio
signals before sending them to the front door speakers using the audio signal circuits.
Diagnosis Procedure
INFOID:0000000003188240
1.HARNESS CHECK
1.
2.
E
A
Connector
B
Terminal
Connector
58
B121
D3
59
71
D103
72
3.
Continuity
Terminal
1
2
1
Yes
Check continuity between BOSE speaker amp. harness connector B121 (A) and ground.
A
Connector
Terminal
Continuity
Ground
No
58
B121
59
71
J
ALNIA0134ZZ
72
AV
AV-113
2008 Altima
Connector
B121
(+)
(-)
58
59
71
Reference
signal
Condition
Receive
audio signal
72
SKIA0177E
ALNIA0135ZZ
3.HARNESS CHECK
1.
2.
B
Terminal
Connector
Terminal
2
M43
75
76
B121
11
73
12
3.
Continuity
Yes
74
Terminal
Continuity
Ground
No
2
M43
3
11
ALNIA0136ZZ
12
AV-114
2008 Altima
Connector
Terminals
(+)
(-)
Condition
Reference
signal
D
M43
11
12
Receive
audio signal
E
SKIA0177E
G
WKIA5352E
AV
AV-115
2008 Altima
INFOID:0000000001830617
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio
signals before sending them to the front tweeters using the audio signal circuits.
Diagnosis Procedure
INFOID:0000000001830618
1.HARNESS CHECK
1.
2.
B
Terminal
Connector
41
B122
M51
42
44
M52
43
3.
Terminal
Continuity
1
2
1
Yes
Check continuity between BOSE speaker amp. harness connector B122 (A) and ground.
A
Connector
Terminal
Continuity
Ground
No
41
B122
42
44
ALNIA0137ZZ
43
AV-116
2008 Altima
Connector
(+)
(-)
41
42
Reference
signal
Condition
D
B122
44
Receive
audio signal
43
E
SKIA0177E
G
ALNIA0138ZZ
3.HARNESS CHECK
1.
2.
A
Connector
B
Terminal
Connector
Terminal
2
M43
Continuity
75
76
B121
11
73
12
3.
Yes
74
A
Connector
Terminal
Continuity
Ground
No
2
M43
3
11
AV
ALNIA0136ZZ
12
AV-117
2008 Altima
Connector
M43
Terminals
(+)
(-)
11
12
Condition
Reference
signal
Receive
audio signal
SKIA0177E
AV-118
ALNIA0171ZZ
2008 Altima
TWEETER (SEDAN)
[BOSE AUDIO WITHOUT NAVIGATION]
TWEETER (SEDAN)
Description
INFOID:0000000003188241
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio
signals before sending them to the front tweeters using the audio signal circuits.
Diagnosis Procedure
INFOID:0000000003188242
1.HARNESS CHECK
1.
2.
E
A
Connector
B
Terminal
Connector
41
B122
M51
42
44
M52
43
3.
Terminal
Continuity
1
2
1
Yes
Check continuity between BOSE speaker amp. harness connector B122 (A) and ground.
A
Connector
Terminal
Continuity
Ground
No
41
B122
42
44
J
ALNIA0137ZZ
43
AV
AV-119
2008 Altima
TWEETER (SEDAN)
[BOSE AUDIO WITHOUT NAVIGATION]
< COMPONENT DIAGNOSIS >
1. Connect BOSE speaker amp. connector B122 and suspect
tweeter connector.
2. Turn ignition switch to ACC.
3. Push POWER switch.
4. Check the signal between BOSE speaker amp. harness connector B122 terminals with CONSULT-III or oscilloscope.
Terminals
Connector
B122
(+)
(-)
41
42
44
Reference
signal
Condition
Receive
audio signal
43
SKIA0177E
3.HARNESS CHECK
1.
2.
B
Terminal
Connector
Terminal
2
M43
75
76
B121
11
73
12
3.
Continuity
Yes
74
Terminal
Continuity
Ground
No
2
M43
3
11
ALNIA0136ZZ
12
AV-120
2008 Altima
TWEETER (SEDAN)
[BOSE AUDIO WITHOUT NAVIGATION]
< COMPONENT DIAGNOSIS >
1. Connect audio unit connector and BOSE speaker amp. connector.
2. Turn ignition switch ACC.
3. Push POWER switch.
4. Check the signal between audio unit harness connector M43
terminals with CONSULT-III or oscilloscope.
Connector
Terminals
(+)
(-)
Condition
Reference
signal
D
M43
11
12
Receive
audio signal
E
SKIA0177E
G
ALNIA0171ZZ
AV
AV-121
2008 Altima
CENTER SPEAKER
[BOSE AUDIO WITHOUT NAVIGATION]
CENTER SPEAKER
Description
INFOID:0000000001830619
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio
signals before sending them to the center speaker using the audio signal circuits.
Diagnosis Procedure
INFOID:0000000001830620
1.HARNESS CHECK
1.
2.
B
Terminal
69
B121
3.
Connector
Terminal
M151
70
Continuity
Yes
Check continuity between BOSE speaker amp. harness connector B121 (A) and ground.
A
Connector
Terminal
69
B121
70
Continuity
Ground
No
ALNIA0139ZZ
Connector
Terminals
(+)
(-)
Condition
Reference
signal
ALNIA0140ZZ
B121
69
70
Receive
audio signal
SKIA0177E
3.HARNESS CHECK
Revision: July 2007
AV-122
2008 Altima
CENTER SPEAKER
[BOSE AUDIO WITHOUT NAVIGATION]
< COMPONENT DIAGNOSIS >
1. Disconnect audio unit connector M43 and BOSE speaker amp.
connector B121.
2. Check continuity between audio unit harness connector M43 (A)
and BOSE speaker amp. harness connector B121 (B).
B
A
Connector
Terminal
Connector
Terminal
76
B121
11
Yes
73
12
3.
75
M43
Continuity
74
Continuity
Ground
No
Terminal
2
3
M43
11
G
ALNIA0136ZZ
12
Connector
Terminals
(+)
(-)
Condition
Reference
signal
M
M43
11
12
Receive
audio signal
AV
SKIA0177E
AV-123
P
ALNIA0171ZZ
2008 Altima
INFOID:0000000001830621
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio
signals before sending them to the rear tweeters using the audio signal circuits.
Diagnosis Procedure
INFOID:0000000001830622
1.HARNESS CHECK
1.
2.
Terminal
A: B121
B: B122
3.
Connector
55
C: D202
68
49
C: D302
54
Terminal
Continuity
2
1
Yes
2
1
Check continuity between BOSE speaker amp. harness connectors B121 (A) and B122 (B) and ground.
Connector
A: B121
B: B122
Terminal
Continuity
Ground
No
55
68
49
54
ALNIA0141ZZ
AV-124
2008 Altima
Connector
A: B121
B: B122
(+)
(-)
68
55
54
Reference
signal
Condition
D
Receive
audio signal
49
SKIA0177E
G
ALNIA0142ZZ
3.HARNESS CHECK
1.
2.
A
Connector
B
Terminal
Connector
Terminal
4
M43
Continuity
Yes
64
63
B121
13
66
14
3.
65
A
Connector
Terminal
Continuity
4
M43
5
13
AV
Ground
No
ALNIA0144ZZ
14
AV-125
2008 Altima
Connector
M43
Terminals
(+)
(-)
13
14
Condition
Reference
signal
Receive
audio signal
SKIA0177E
AV-126
AWNIA0034ZZ
2008 Altima
Description
INFOID:0000000003188243
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio
signals before sending them to the rear door speakers using the audio signal circuits.
Diagnosis Procedure
INFOID:0000000003188244
1.HARNESS CHECK
1.
2.
Terminal
A: B121
B: B122
3.
Connector
55
C: D202
68
49
C: D302
54
Terminal
Continuity
2
1
Yes
Check continuity between BOSE speaker amp. harness connectors B121 (A) and B122 (B) and ground.
Connector
A: B121
B: B122
Terminal
Continuity
55
68
49
Ground
No
54
ALNIA0141ZZ
AV
AV-127
2008 Altima
Connector
A: B121
B: B122
(+)
(-)
68
55
54
Reference
signal
Condition
Receive
audio signal
49
SKIA0177E
ALNIA0142ZZ
3.HARNESS CHECK
1.
2.
B
Terminal
Connector
Terminal
4
M43
64
63
B121
13
66
14
3.
Continuity
Yes
65
Terminal
Continuity
Ground
No
4
M43
5
13
ALNIA0144ZZ
14
AV-128
2008 Altima
Connector
Terminals
(+)
(-)
Condition
Reference
signal
D
M43
13
14
Receive
audio signal
E
SKIA0177E
G
AWNIA0034ZZ
AV
AV-129
2008 Altima
SUBWOOFER
[BOSE AUDIO WITHOUT NAVIGATION]
SUBWOOFER
Description
INFOID:0000000001830623
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio
signals before sending them to the subwoofers using the audio signal circuits.
Diagnosis Procedure
INFOID:0000000001830624
1.HARNESS CHECK
1.
2.
B
Terminal
Connector
53
B122
B120
48
45
B124
46
3.
Terminal
Continuity
1
2
1
Yes
Check continuity between BOSE speaker amp. harness connector B122 (A) and ground.
A
Connector
Terminal
Continuity
Ground
No
53
B122
48
45
ALNIA0145ZZ
46
AV-130
2008 Altima
SUBWOOFER
[BOSE AUDIO WITHOUT NAVIGATION]
< COMPONENT DIAGNOSIS >
1. Connect BOSE speaker amp. connector B122 and suspect rear
subwoofer connector.
2. Turn ignition switch to ACC.
3. Push POWER switch.
4. Check the signal between BOSE speaker amp. harness connector B122 terminals with CONSULT-III or oscilloscope.
Terminals
Connector
(+)
(-)
53
48
Reference
signal
Condition
D
B122
45
46
E
SKIA0177E
G
ALNIA0932GB
3.HARNESS CHECK
1.
2.
A
Connector
B
Terminal
Connector
Terminal
4
M43
Continuity
64
63
B121
13
66
14
3.
Yes
65
A
Connector
Continuity
Ground
No
Terminal
4
M43
5
13
AV
ALNIA0144ZZ
14
AV-131
2008 Altima
SUBWOOFER
[BOSE AUDIO WITHOUT NAVIGATION]
< COMPONENT DIAGNOSIS >
1. Connect audio unit connector M43 and BOSE speaker amp.
connector B121.
2. Turn ignition switch to ACC.
3. Push POWER switch.
4. Check the signal between audio unit harness connector M43
terminals with CONSULT-III or oscilloscope.
Connector
M43
Terminals
(+)
(-)
13
14
Condition
Reference
signal
Receive
audio signal
SKIA0177E
AV-132
AWNIA0034ZZ
2008 Altima
Description
INFOID:0000000001830625
When the audio system is turned on, a voltage signal is supplied from the audio unit to the BOSE speaker
amp. When this signal is received, the BOSE speaker amp. will turn on.
Diagnosis Procedure
INFOID:0000000001830626
ALNIA0147ZZ
ALNIA0148ZZ
AV
AV-133
2008 Altima
INFOID:0000000001830627
When one of the steering wheel audio control switches is pushed, the resistance in the steering switch circuit
changes depending on which button is pushed.
Diagnosis Procedure
INFOID:0000000001830628
WITH BLUETOOTH
1.CHECK HARNESS
1.
2.
3.
B
Terminal
Connector
Terminal
12
B55
24
13
M30
31
14
4.
Continuity
Yes
ALNIA0149ZZ
33
Check continuity between Bluetooth control unit B55 (A) and ground.
A
Connector
Continuity
Ground
No
Terminal
12
B55
13
14
2.CHECK HARNESS
1.
2.
Connector
B
Terminal
Connector
6
M43
15
Terminal
Continuity
17
B55
16
19
Yes
18
WKIA5349E
AV-134
2008 Altima
B
Terminal
Connector
24
M30
Continuity
Terminal
14
31
M88
15
33
Yes
17
ALNIA0931GB
WITHOUT BLUETOOTH
2.CHECK HARNESS
1.
2.
3.
B
Connector
A
Terminal
Connector
24
M30
Terminal
Continuity
31
M43
33
4.
16
Yes
M
AWNIA0036ZZ
15
Check continuity between audio unit connector M43 (A) and ground.
A
Connector
Terminal
Continuity
Ground
No
AV
6
M43
15
16
AV-135
2008 Altima
B
Terminal
Connector
24
M30
31
Continuity
Terminal
14
M88
33
15
Yes
17
ALNIA0931GB
Component Inspection
INFOID:0000000001830629
WITH BLUETOOTH
Measure the resistance between the steering switch connector terminals 14 to 17 and 15 to 17.
Standard
:0
: 108 112
: 323 337
:0
: 108 112
: 323 337
AWNIA0035ZZ
: 990 1030
WITHOUT BLUETOOTH
Measure the resistance between the steering switch connector terminals 14 to 17 and 15 to 17.
Standard
:0
: 162 168
: 639 665
: 162 168
: 639 665
AV-136
AWNIA0035ZZ
2008 Altima
Description
INFOID:0000000003222175
When one of the steering wheel audio control switches is pushed, the resistance in steering switch circuit
changes depending on which button is pushed.
Diagnosis Procedure
INFOID:0000000003222176
WITH BLUETOOTH
1.CHECK HARNESS
1.
2.
3.
Connector
Terminal
12
B126
Continuity
24
13
M30
31
14
4.
B
Terminal
Yes
ALNIA0149ZZ
33
Check continuity between Bluetooth control unit B126 (A) and ground.
A
Connector
Continuity
Ground
No
Terminal
12
B126
13
14
2.CHECK HARNESS
1.
2.
Connector
B
Terminal
Connector
6
M43
15
Terminal
Continuity
AV
17
B126
16
19
Yes
18
WKIA5349E
AV-137
2008 Altima
B
Terminal
Connector
24
M30
Continuity
Terminal
14
31
M88
15
33
Yes
17
ALNIA0931GB
WITHOUT BLUETOOTH
2.CHECK HARNESS
1.
2.
3.
Connector
A
Terminal
Connector
24
M30
Continuity
31
M43
33
4.
Terminal
16
Yes
AWNIA0036ZZ
15
Check continuity between audio unit connector M43 (A) and ground.
A
Connector
Terminal
Continuity
Ground
No
6
M43
15
16
AV-138
2008 Altima
B
Terminal
Connector
24
M30
31
Continuity
Terminal
14
M88
33
15
Yes
17
ALNIA0931GB
Component Inspection
INFOID:0000000003222177
WITH BLUETOOTH
F
Measure the resistance between the steering switch connector terminals 14 to 17 and 15 to 17.
Standard
:0
: 108 112
: 323 337
:0
: 108 112
: 323 337
I
AWNIA0035ZZ
: 990 1030
WITHOUT BLUETOOTH
Measure the resistance between the steering switch connector terminals 14 to 17 and 15 to 17.
Standard
:0
: 162 168
: 639 665
: 162 168
: 639 665
AV
AWNIA0035ZZ
AV-139
2008 Altima
INFOID:0000000003188248
Communication signals are exchanged between the audio unit and satellite radio tuner using the communication circuits.
INFOID:0000000003188249
1.CHECK HARNESS - 1
1.
2.
3.
4.
2.CHECK HARNESS - 2
1.
2.
AWNIA0039ZZ
3.CHECK HARNESS - 3
1.
2.
AWNIA0040ZZ
AV-140
2008 Altima
28 - Ground
C
D
WKIA4544E
SKIB3825E
29 - Ground
H
I
WKIA4545E
SKIB3824E
30 - Ground
AV
WKIA4546E
SKIB3826E
AV-141
2008 Altima
INFOID:0000000003222180
Communication signals are exchanged between the audio unit and satellite radio tuner using the communication circuits.
INFOID:0000000003222182
1.CHECK HARNESS - 1
1.
2.
3.
4.
2.CHECK HARNESS - 2
1.
2.
AWNIA0039ZZ
3.CHECK HARNESS - 3
1.
2.
AWNIA0040ZZ
AV-142
2008 Altima
28 - Ground
C
D
WKIA4544E
SKIB3825E
29 - Ground
H
I
WKIA4545E
SKIB3824E
30 - Ground
AV
WKIA4546E
SKIB3826E
AV-143
2008 Altima
INFOID:0000000003188251
Left and right channel audio signals are supplied from the satellite radio tuner to the audio unit through the
sound signal circuits.
INFOID:0000000003188252
LEFT CHANNEL
1.CHECK HARNESS
1.
2.
3.
B
Terminal
B57
4.
Connector
21
Terminal
31
M45
22
Continuity
Yes
32
AWNIA0041ZZ
Check continuity between satellite radio tuner (factory installed) connector B57 (A) and ground.
A
Connector
B57
Continuity
Ground
No
Terminal
21
22
WKIA4548E
SKIB3609E
RIGHT CHANNEL
1.CHECK HARNESS
Revision: July 2007
AV-144
2008 Altima
B
Terminal
B57
4.
Connector
23
M45
24
Terminal
C
Yes
34
AWNIA0042ZZ
Check continuity between satellite radio tuner (factory installed) connector B57 (A) and ground.
Connector
B57
Continuity
Ground
No
Terminal
23
24
Continuity
33
23 - 24
J
K
WKIA4550E
SKIB3609E
AV
AV-145
2008 Altima
INFOID:0000000003222185
Left and right channel audio signals are supplied from the satellite radio tuner to the audio unit through the
sound signal circuits.
INFOID:0000000003222187
LEFT CHANNEL
1.CHECK HARNESS
1.
2.
3.
B
Terminal
B123
4.
Connector
21
Terminal
31
M45
22
Continuity
Yes
32
AWNIA0041ZZ
Check continuity between satellite radio tuner (factory installed) connector B123 (A) and ground.
A
Connector
B123
Continuity
Ground
No
Terminal
21
22
WKIA4548E
SKIB3609E
RIGHT CHANNEL
1.CHECK HARNESS
Revision: July 2007
AV-146
2008 Altima
B
Terminal
B123
4.
Connector
23
M45
24
Terminal
C
Yes
34
AWNIA0042ZZ
Check continuity between satellite radio tuner (factory installed) connector B123 (A) and ground.
Connector
B123
Continuity
Ground
No
Terminal
23
24
Continuity
33
23 - 24
J
K
WKIA4550E
SKIB3609E
AV
AV-147
2008 Altima
INFOID:0000000001830634
Voice signals are transmitted from the microphone to the Bluetooth control unit using the microphone signal
circuits.
Diagnosis Procedure
INFOID:0000000001830635
B
Terminal
Connector
7
B55
R7
29
4.
Continuity
Terminal
Yes
WKIA5795E
Check continuity between Bluetooth control unit harness connector B55 (A) and ground.
A
Connector
Continuity
Ground
No
Terminal
7
B55
8
29
: Approx. 5V
WKIA5796E
AV-148
2008 Altima
C
PKIB5037J
ALNIA0934GB
AV
AV-149
2008 Altima
INFOID:0000000003222190
Voice signals are transmitted from the microphone to the Bluetooth control unit using the microphone signal
circuits.
Diagnosis Procedure
INFOID:0000000003222191
B
Terminal
Connector
7
B126
R7
29
4.
Continuity
Terminal
Yes
WKIA5795E
Check continuity between Bluetooth control unit harness connector B126 (A) and ground.
A
Connector
Continuity
Ground
No
Terminal
7
B126
8
29
: Approx. 5V
WKIA5796E
AV-150
2008 Altima
C
PKIB5037J
ALNIA0934GB
AV
AV-151
2008 Altima
ECU DIAGNOSIS
AUDIO UNIT (COUPE)
Reference Value
INFOID:0000000001830636
TERMINAL LAYOUT
AWNIA0046ZZ
Item
Ground
2
(G)
3
(R)
Signal input/output
Condition
Reference value
Ignition
switch
Operation
Amp. ON signal
Output
ON
Audio sound
signal front LH
Output
ON
SKIA0177E
4
(GR/V)
5
(W/L)
Audio sound
signal rear LH
Output
ON
SKIA0177E
6
(W/G)
7
(V/Y)
Ground
Ground
10
Remote control A
ACC signal
Shield
Input
ON
Input
ON
Press SEEK
DOWN switch.
0.7 V
Press SEEK UP
switch.
1.3 V
Press
switch.
2.0 V
3.3 V
Ignition switch
ACC or ON
AV-152
Battery voltage
Approx. 0V
2008 Altima
Item
Signal input/output
Condition
A
Reference value
Ignition
switch
Operation
11
(B)
12
(W)
Audio sound
signal front RH
Output
ON
SKIA0177E
E
13
(V)
14
(LG)
Audio sound
signal rear RH
Output
ON
F
SKIA0177E
15
(L/B)
Input
Press SOURCE
switch.
Press
16
(GR/L)
18
(V/W)
Ground
Ground
Remote control B
Vehicle speed
signal (8pulse)
Input
Input
ON
ON
switch.
Press VOL UP
switch.
0V
0.7 V
1.3 V
2V
3.3 V
When vehicle
speed is approx.
40 km/h (25 MPH)
L
PKIA1935E
19
(Y/R)
Ground
Battery power
Input
Battery voltage
20
Shield
Approx. 0V
21
(L)
M-CAN +
22
(P)
M-CAN -
23
Shield
Approx. 0V
25
Tel. Shield
Approx. 0V
26
(B/R)
27
(Y)
Telephone audio in
28
(R/W)
Ground
Telephone ON
signal
Input
ON
AV-153
AV
2008 Altima
32
(Y/L)
Item
31
(W/L)
Audio left
channel sound
signal from
satellite radio
tuner
Signal input/output
Input
Condition
Reference value
Ignition
switch
Operation
ON
SKIA0177E
33
(Y/G)
Audio right
channel sound
signal from
satellite radio
tuner
35
Shield ground
(audio signal)
0V
36
Shield ground
(data)
0V
38
(R)
Ground
Satellite radio
tuner request
to audio unit
Input
5V
39
(G)
Ground
Audio RX
Input
34
(BR/L)
Input
ON
SKIA0177E
ON
SKIA4403E
40
(B)
Ground
Audio TX
Output
SKIA4402E
75
(B)
Ground
Antenna amp
power supply
Output
ON
Battery voltage
76
(B)
Ground
Main antenna
Input
ON
AV-154
2008 Altima
Item
Ground
Amp. ON signal
Signal input/output
Output
Condition
Reference value
Ignition
switch
Operation
ON
B
More than approx. 6.5V
C
2
(G)
3
(R)
Audio sound
signal front LH
Output
ON
SKIA0177E
4
(GR/V)
5
(W/L)
Audio sound
signal rear LH
Output
ON
G
SKIA0177E
6
(W/G)
7
(V/Y)
Ground
Ground
10
Remote control A
ACC signal
Shield
Input
ON
Input
ON
Press SOURCE
switch.
0.0 V
Press SEEK UP
switch.
0.75 V
Press VOL UP
switch.
2.0 V
5.0 V
Ignition switch
ACC or ON
Battery voltage
Approx. 0V
11
(B)
12
(W)
Audio sound
signal front RH
Output
ON
SKIA0177E
AV
13
(V)
14
(LG)
Audio sound
signal rear RH
Output
ON
O
SKIA0177E
15
(L/B)
16
(GR/L)
Ground
Remote control B
Input
Input
ON
Press SEEK
DOWN switch.
0.75 V
2.0 V
5.0 V
AV-155
2008 Altima
18
(V/W)
Item
Ground
Vehicle speed
signal (8pulse)
Signal input/output
Input
Condition
Reference value
Ignition
switch
Operation
ON
When vehicle
speed is approx.
40 km/h (25 MPH)
PKIA1935E
19
(Y/R)
Ground
20
32
(Y/L)
31
(W/L)
Battery power
Shield
Audio left
channel sound
signal from
satellite radio
tuner
Input
Battery voltage
Approx. 0V
Input
ON
SKIA0177E
34
(BR/L)
33
(Y/G)
Audio right
channel sound
signal from
satellite radio
tuner
Input
ON
SKIA0177E
35
Shield ground
(audio signal)
0V
36
Shield ground
(data)
0V
38
(R)
Ground
Satellite radio
tuner request
to audio unit
Input
5V
39
(G)
Ground
Audio RX
Input
40
(B)
Ground
Audio TX
Output
SKIA4402E
75
(B)
Ground
Antenna amp
power supply
Output
ON
Battery voltage
76
(B)
Ground
Main antenna
Input
ON
AV-156
2008 Altima
INFOID:0000000001830637
AV
AWNWA0019GB
AV-157
2008 Altima
AWNWA0020GB
AV-158
2008 Altima
AV
O
AWNWA0021GB
AV-159
2008 Altima
AWNIA0332GB
AV-160
2008 Altima
AV
O
AWNIA0333GB
AV-161
2008 Altima
AWNIA0334GB
AV-162
2008 Altima
AV
O
AWNIA0335GB
AV-163
2008 Altima
AWNIA0336GB
AV-164
2008 Altima
AV
O
AWNIA0337GB
AV-165
2008 Altima
AWNIA0338GB
AV-166
2008 Altima
AV
O
AWNIA0339GB
AV-167
2008 Altima
AWNIA0340GB
AV-168
2008 Altima
AV
O
AWNIA0341GB
AV-169
2008 Altima
AWNIA0342GB
AV-170
2008 Altima
Reference Value
INFOID:0000000003222255
TERMINAL LAYOUT
AWNIA0046ZZ
Item
Ground
2
(G)
3
(R)
Signal input/output
Condition
Reference value
Ignition
switch
Operation
Amp. ON signal
Output
ON
Audio sound
signal front LH
Output
ON
J
SKIA0177E
K
4
(GR/V)
5
(W/L)
Audio sound
signal rear LH
Output
ON
L
SKIA0177E
6
(W/G)
7
(V/Y)
Ground
Ground
10
Remote control A
ACC signal
Shield
Input
ON
Input
ON
Press SEEK
DOWN switch.
0.7 V
Press SEEK UP
switch.
1.3 V
Press
switch.
2.0 V
3.3 V
Ignition switch
ACC or ON
AV-171
AV
Battery voltage
Approx. 0V
2008 Altima
Item
11
(B)
12
(W)
Audio sound
signal front RH
Signal input/output
Output
Condition
Reference value
Ignition
switch
Operation
ON
SKIA0177E
13
(V)
14
(LG)
Audio sound
signal rear RH
Output
ON
SKIA0177E
15
(L/B)
Input
Press SOURCE
switch.
Press
16
(GR/L)
18
(V/W)
Ground
Ground
Remote control B
Vehicle speed
signal (8pulse)
Input
Input
ON
ON
switch.
Press VOL UP
switch.
0V
0.7 V
1.3 V
2V
3.3 V
When vehicle
speed is approx.
40 km/h (25 MPH)
PKIA1935E
19
(Y/R)
Ground
Battery power
Input
Battery voltage
20
Shield
Approx. 0V
21
(L)
M-CAN +
22
(P)
M-CAN -
23
Shield
Approx. 0V
25
Tel. Shield
Approx. 0V
26
(B/R)
27
(Y)
Telephone audio in
28
(R/W)
Ground
Telephone ON
signal
Input
ON
AV-172
2008 Altima
Item
Signal input/output
Condition
A
Reference value
Ignition
switch
Operation
32
(Y/L)
31
(W/L)
Audio left
channel sound
signal from
satellite radio
tuner
Input
ON
SKIA0177E
34
(BR/L)
33
(Y/G)
Audio right
channel sound
signal from
satellite radio
tuner
E
Input
ON
F
SKIA0177E
35
Shield ground
(audio signal)
36
Shield ground
(data)
Ground
Satellite radio
tuner request
to audio unit
38
(R)
0V
0V
H
Input
5V
39
(G)
Ground
Audio RX
Input
ON
SKIA4403E
L
40
(B)
Ground
Audio TX
Output
M
SKIA4402E
75
(B)
Ground
Antenna amp
power supply
Output
ON
Battery voltage
76
(B)
Ground
Main antenna
Input
ON
AV
AV-173
2008 Altima
Item
1
(B/P)
Ground
2
(G)
3
(R)
Signal input/output
Condition
Reference value
Ignition
switch
Operation
Amp. ON signal
Output
ON
Audio sound
signal front LH
Output
ON
SKIA0177E
4
(GR/V)
5
(W/L)
Audio sound
signal rear LH
Output
ON
SKIA0177E
6
(W/G)
7
(V/Y)
Ground
Ground
10
11
(B)
12
(W)
Remote control A
ACC signal
Shield
Audio sound
signal front RH
Input
ON
Press SOURCE
switch.
0.0 V
Press SEEK UP
switch.
0.75 V
Press VOL UP
switch.
2.0 V
5.0 V
Ignition switch
ACC or ON
Input
ON
Output
ON
Battery voltage
Approx. 0V
SKIA0177E
13
(V)
14
(LG)
Audio sound
signal rear RH
Output
ON
SKIA0177E
15
(L/B)
16
(GR/L)
Ground
Remote control B
Input
Input
ON
Press SEEK
DOWN switch.
0.75 V
2.0 V
5.0 V
AV-174
2008 Altima
Item
Signal input/output
Condition
A
Reference value
Ignition
switch
Operation
18
(V/W)
Ground
Vehicle speed
signal (8pulse)
Input
ON
When vehicle
speed is approx.
40 km/h (25 MPH)
PKIA1935E
19
(Y/R)
Ground
20
32
(Y/L)
31
(W/L)
Battery power
Shield
Audio left
channel sound
signal from
satellite radio
tuner
Input
Battery voltage
Approx. 0V
F
Input
ON
G
SKIA0177E
H
34
(BR/L)
33
(Y/G)
Audio right
channel sound
signal from
satellite radio
tuner
Input
ON
SKIA0177E
35
Shield ground
(audio signal)
36
Shield ground
(data)
38
(R)
Ground
Satellite radio
tuner request
to audio unit
Input
Input
0V
0V
5V
M
39
(G)
Ground
Audio RX
AV
ON
SKIA4403E
O
40
(B)
Ground
Audio TX
Output
SKIA4402E
75
(B)
Ground
Antenna amp
power supply
Output
ON
Battery voltage
76
(B)
Ground
Main antenna
Input
ON
AV-175
2008 Altima
INFOID:0000000003222256
AWNWA0120GB
AV-176
2008 Altima
AV
O
AWNWA0121GB
AV-177
2008 Altima
ALNWA0024GB
AV-178
2008 Altima
AV
O
AWNIA0601GB
AV-179
2008 Altima
ALNIA0031GB
AV-180
2008 Altima
AV
O
ALNIA0032GB
AV-181
2008 Altima
AWNIA0602GB
AV-182
2008 Altima
AV
O
ALNIA0034GB
AV-183
2008 Altima
AWNIA0603GB
AV-184
2008 Altima
AV
O
AWNIA0604GB
AV-185
2008 Altima
AWNIA0605GB
AV-186
2008 Altima
AV
O
ALNIA0081GB
AV-187
2008 Altima
AWNIA0606GB
AV-188
2008 Altima
AV
O
AWNIA0607GB
AV-189
2008 Altima
ALNIA0084GB
AV-190
2008 Altima
Reference Value
INFOID:0000000001830638
TERMINAL LAYOUT
AWNIA0047ZZ
PHYSICAL VALUES
F
Terminal
(wire color)
Item
41
(LG)
42
(B/Y)
Signal input/output
Condition
Reference value
Ignition
switch
Operation
ON
H
Front tweeter LH
Output
I
SKIA0177E
J
44
(L/O)
43
(GR/L)
Front tweeter RH
Output
ON
SKIA0177E
45
(BR/W)
46
(BR)
Subwoofer RH
Output
ON
AV
SKIA0177E
47
(B/W)
50
(BR)
51
(B/R)
52
(B/W)
Ground
Ground
ON
O
Ground
Battery
Input
Battery voltage
P
Ground
Ground
ON
AV-191
2008 Altima
Item
53
(W/B)
48
(G/B)
Subwoofer LH
Signal input/output
Output
Condition
Reference value
Ignition
switch
Operation
ON
SKIA0177E
54
(L)
49
(B/W)
Rear tweeter RH
Output
ON
SKIA0177E
58
(W)
59
(B)
Door speaker LH
Output
ON
SKIA0177E
60
(B/G)
Ground
64
(BR)
63
(Y)
Amp. ON signal
Input
ON
Input
ON
SKIA0177E
66
(LG)
65
(V)
Input
ON
SKIA0177E
68
(R/G)
55
(BR/B)
Rear tweeter LH
Output
ON
SKIA0177E
AV-192
2008 Altima
Item
Signal input/output
Condition
Ignition
switch
A
Reference value
Operation
69
(B/P)
70
(O/B)
Center speaker
Output
ON
SKIA0177E
E
71
(G/W)
72
(BR)
Door speaker RH
Output
ON
F
SKIA0177E
G
73
(W/L)
74
(GR/V)
Input
ON
SKIA0177E
75
(W/R)
76
(B/R)
Input
ON
K
SKIA0177E
AV
AV-193
2008 Altima
INFOID:0000000001830639
TERMINAL LAYOUT
LKIA0735E
PHYSICAL VALUES
Terminal
(Wire color)
Item
22
(Y/L)
21
(W/L)
Audio signal LH
Signal
input/
output
Output
Condition
Ignition
switch
ON
Operation
Voltage
(approx.)
SKIB3609E
24
(BR/L)
23
(Y/G)
25
26
28
(R/L)
Audio signal RH
Output
ON
Shield
Data ground
ON
Approx. 0 V
Ground
REQ1
(SAT-AUDIO)
Output
ON
SKIB3609E
SKIB3825E
29
(R/W)
Ground
Communication signal
(SAT-AUDIO)
Output
ON
SKIB3824E
AV-194
2008 Altima
Item
Signal
input/
output
Condition
Ignition
switch
Operation
Voltage
(approx.)
30
(B)
Ground
Communication signal
(AUDIO-SAT)
Input
ON
SKIB3826E
32
(Y/R)
36
(GR/W)
37
Antenna signal
OFF
Input
Battery voltage
ACC
AV
AV-195
2008 Altima
INFOID:0000000001830640
TERMINAL LAYOUT
AWNIA0048ZZ
PHYSICAL VALUES
Terminal
(Wire color)
Item
Signal
input/
output
Condition
Reference value
(Approx.)
Ignition
switch
Operation
Input
Battery voltage
ACC power
Input
ACC/ON
Battery voltage
Ground
IGN power
Input
ON/
START
Battery voltage
4
(B/W)
Ground
Shield
7
(B/R)
8
(R/B)
Mic-in signal
Input
9
(BR)
10
(Y)
Audio out
Output
ACC/ON
Bluetooth control
unit sends audio signal
1
(Y/B)
Ground
Battery power
2
(V/Y)
Ground
3
(G/W)
SKIB3609E
11
(G/O)
12
(W/G)
Ground
Mute
Output
Input
ACC/ON
0.7 V
Press SEEK UP
switch.
1.3 V
Pressing
2.0 V
switch.
AV-196
3.3 V
2008 Altima
Item
Signal
input/
output
Condition
Ignition
switch
Reference value
(Approx.)
Operation
Press SOURCE
switch.
Press
13
(GR/L)
Ground
14
(L/B)
17
(W/G)
Ground
Steering switch
1
Input
Input
Output
ACC/ON
ACC/ON
0.7 V
switch.
C
1.3 V
2V
3.3 V
0.7 V
Press SEEK UP
switch.
1.3 V
Pressing
2.0 V
switch.
Ground
Steering switch
2
Output
ACC/ON
3.3 V
Press SOURCE
switch.
18
(GR/L)
Press
0V
Press VOL UP
switch.
0V
0.7 V
switch.
Press VOL UP
switch.
1.3 V
2V
3.3 V
19
(L/B)
Ground
Steering switch
ground
Output
24
(B/W)
Ground
L
28
(V/W)
Vehicle speed
signal (8pulse)
Input
ON
PKIA1935E
29 (R/L)
Ground
Microphone
power
Output
35 (L)
M-CAN (+)
36 (P)
M-CAN (-)
37
Shield ground
39
(Y/R)
M-CAN jumper-1
40
(Y/R)
M-CAN (+) 2
AV-197
AV
2008 Altima
Item
Signal
input/
output
Condition
Ignition
switch
Reference value
(Approx.)
41
(SB)
M-CAN jumper-1
42
(SB)
M-CAN (-) 2
AV-198
Operation
2008 Altima
SYMPTOM DIAGNOSIS
INFOID:0000000001830641
AUDIO SYSTEM
C
Symptom
Possible cause
Reference page
Inoperative
AV-100
AV-204
AV-134
AV-204
Audio unit
Audio unit power circuit
BOSE speaker amp. ON signal
BOSE speaker amp. ground circuit
BOSE speaker amp.
AV-204
AV-100
AV-133
AV-100
AV-205
Door speaker
Front tweeter
Center speaker
Rear tweeter
Subwoofer
AV-209
AV-207
AV-208
AV-211
AV-213
CD
H
Symptom
Possible cause
Reference page
CD cannot be inserted.
CD cannot be ejected.
The CD cannot be played.
I
Audio unit
AV-204
SATELLITE RADIO
K
Symptom
Possible cause
Reference page
Inoperative
AV-106
AV-140
AV-214
AV-144
AV-144
AV-214
HANDS-FREE PHONE
AV
Symptom
Possible cause
Reference page
Inoperative
AV-107
AV-227
AV-134
AV-227
Microphone
Steering wheel audio control switch
Bluetooth control unit
AV-148
AV-134
AV-227
AV-199
2008 Altima
INFOID:0000000003289160
AUDIO SYSTEM
Symptom
Possible cause
Reference page
Inoperative
AV-105
AV-204
AV-137
AV-204
Audio unit
Audio unit power circuit
BOSE speaker amp. ON signal
BOSE speaker amp. ground circuit
BOSE speaker amp.
AV-204
AV-105
AV-133
AV-105
AV-205
AV-113
AV-119
AV-122
AV-127
AV-130
CD
Symptom
Possible cause
Reference page
CD cannot be inserted.
CD cannot be ejected.
The CD cannot be played.
Audio unit
AV-204
SATELLITE RADIO
Symptom
Possible cause
Reference page
Inoperative
AV-106
AV-142
AV-214
AV-146
AV-146
AV-214
HANDS-FREE PHONE
Symptom
Possible cause
Reference page
Inoperative
AV-107
AV-99
AV-137
AV-99
Microphone
Steering wheel audio control switch
Bluetooth control unit
AV-148
AV-137
AV-99
AV-200
2008 Altima
Description
INFOID:0000000001830642
The majority of the audio concerns are the result of outside causes (bad CD, electromagnetic interference,
etc.).
NOISE
The following noise results from variations in field strength, such as fading noise and multi-path noise, or
external noise from trains and other sources. It is not a malfunction.
Fading noise: This noise occurs because of variations in the field strength in a narrow range due to mountains or buildings blocking the signal.
Multi-path noise: This noise results from the waves sent directly from the broadcast station arriving at the
antenna at a different time from the waves which reflect off mountains or buildings.
The vehicle itself can be a source of noise if noise prevention parts or electrical equipment is malfunctioning.
Check if noise is caused and/or changed by engine speed, ignition switch turned to each position, and operation of each piece of electrical equipment, and determine the cause.
NOTE:
The source of the noise can be found easily by listening to the noise while removing the fuses of electrical
components, one by one.
Possible cause
The occurrence of the noise is linked with the operation of the fuel pump.
Noise only occurs when various
electrical components are operating.
Ignition components
H
Fuel pump condenser
A cracking or snapping sound occurs while the vehicle is being driven, especially when
it is vibrating excessively.
AV
AV-201
2008 Altima
PRECAUTIONS
[BOSE AUDIO WITHOUT NAVIGATION]
PRECAUTION
PRECAUTIONS
Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
INFOID:0000000001346006
The Supplemental Restraint System such as AIR BAG and SEAT BELT PRE-TENSIONER, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SR and SB section of this Service Manual.
WARNING:
To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness connectors.
AV-202
2008 Altima
PREPARATION
[BOSE AUDIO WITHOUT NAVIGATION]
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000001346007
Tool name
Description
Power tool
E
PBIC0191E
AV
AV-203
2008 Altima
AUDIO UNIT
[BOSE AUDIO WITHOUT NAVIGATION]
ON-VEHICLE REPAIR
AUDIO UNIT
Removal and Installation
INFOID:0000000003110982
REMOVAL
1.
2.
ALNIA0915ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-204
2008 Altima
INFOID:0000000001346009
REMOVAL
1.
2.
3.
4.
F
ALNIA0918ZZ
INSTALLATION
Installation is in the reverse order of removal.
INFOID:0000000003110985
REMOVAL
1.
2.
3.
AV
P
ALNIA0046ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-205
2008 Altima
CD CHANGER
[BOSE AUDIO WITHOUT NAVIGATION]
CD CHANGER
Removal and Installation
INFOID:0000000001346010
REMOVAL
1.
2.
3.
4.
Remove the Cluster D lower finisher. Refer to IP-11, "Removal and Installation".
Put selector lever in the drive "D" position (CVT models only).
Put shift lever in neutral (M/T models only).
Using a suitable tool remove the CD changer finisher (1), then
disconnect the power socket, AUX jack connectors and remove
the CD changer finisher (1).
ALNIA0047ZZ
5.
Remove the CD changer screws (A), pull out the unit, then disconnect the CD changer connector and remove the CD changer
(1).
ALNIA0048ZZ
6.
ALNIA0049ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-206
2008 Altima
FRONT TWEETER
[BOSE AUDIO WITHOUT NAVIGATION]
FRONT TWEETER
INFOID:0000000003183459
REMOVAL
1.
2.
3.
Remove the front pillar finisher. Refer to INT-19, "Removal and Installation".
Remove tweeter speaker grille. Refer to IP-11, "Removal and Installation".
Remove the tweeter speaker screws (A), disconnect the tweeter
speaker connector and remove the tweeter speaker (1).
F
ALNIA0050ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV
AV-207
2008 Altima
CENTER SPEAKER
[BOSE AUDIO WITHOUT NAVIGATION]
CENTER SPEAKER
Removal and Installation
INFOID:0000000001346012
REMOVAL
1.
2.
Remove the center speaker grille. Refer to IP-11, "Removal and Installation".
Remove the center speaker screws (A), then pull out the center
speaker (1), then disconnect the center speaker connector and
remove the center speaker (1).
ALNIA0053ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-208
2008 Altima
INFOID:0000000003184432
REMOVAL
1.
2.
Remove the front door finisher. Refer to INT-11, "Removal and Installation".
Remove the front door speaker screws (A), then disconnect the
front door speaker connector and remove the front door speaker
(1).
ALNIA0040ZZ
INSTALLATION
Installation is in the reverse order of removal.
G
AV
AV-209
2008 Altima
INFOID:0000000003185277
REMOVAL
1.
2.
Remove the rear door finisher. Refer to INT-32, "Removal and Installation".
Remove the rear door speaker screws (A), then disconnect the
rear door speaker connector and remove the rear door speaker
(1).
ALNIA0041ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-210
2008 Altima
REAR TWEETER
[BOSE AUDIO WITHOUT NAVIGATION]
REAR TWEETER
INFOID:0000000001756743
REMOVAL
1.
2.
Remove the rear parcel shelf finisher. Refer to INT-16, "Removal and Installation".
Remove the rear tweeter speaker screws (A) and remove the
rear tweeter speaker (1).
ALNIA0919ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV
AV-211
2008 Altima
REAR SPEAKER
[BOSE AUDIO WITHOUT NAVIGATION]
REAR SPEAKER
Removal and Installation - Coupe
INFOID:0000000003185278
REMOVAL
1.
2.
Remove the trunk front finisher. Refer to INT-22, "Removal and Installation".
Remove the rear speaker screws (A), then disconnect the rear
speaker connector (B) and remove the rear speaker (1).
ALNIA0916ZZ
INSTALLATION
Installation is in the reverse order of removal.
INFOID:0000000003185279
REMOVAL
1.
2.
Remove the rear parcel shelf finisher. Refer to INT-44, "Removal and Installation".
Remove the rear speaker screws (A), then disconnect the rear
speaker and remove the rear speaker (1).
ALNIA0042ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-212
2008 Altima
WOOFER
[BOSE AUDIO WITHOUT NAVIGATION]
WOOFER
Components
INFOID:0000000001346016
J
ALNIA0054ZZ
1.
Woofer speaker
2.
A.
Screws
INFOID:0000000001346017
REMOVAL
1.
2.
3.
4.
Remove the rear parcel shelf finisher. Refer to INT-16, "Removal and Installation".
Remove the trunk front finisher. Refer to INT-22, "Removal and Installation".
M
Remove the woofer speaker screws from the top, disconnect the woofer speaker harness connector and
remove the woofer speaker and spacer assembly.
AV
Remove the spacer screws and remove the woofer speaker from the spacer.
INSTALLATION
Installation is in the reverse order of removal.
AV-213
2008 Altima
INFOID:0000000003185280
REMOVAL
1.
2.
3.
4.
5.
ALNIA0920ZZ
INSTALLATION
Installation is in the reverse order of removal.
INFOID:0000000003185281
REMOVAL
1.
2.
3.
ALNIA0055ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-214
2008 Altima
INFOID:0000000001346019
REMOVAL
1.
2.
Lower the headliner at the rear. Refer to INT-19, "Removal and Installation".
Remove the satellite radio antenna nut (A), then disconnect the
satellite radio antenna connector (B) and remove the satellite
radio antenna (1).
ALNIA0056ZZ
INSTALLATION
Installation is in the reverse order of removal.
G
AV
AV-215
2008 Altima
STEERING SWITCH
[BOSE AUDIO WITHOUT NAVIGATION]
STEERING SWITCH
Removal and Installation
INFOID:0000000001744741
REMOVAL
1.
2.
Remove the driver airbag module. Refer to SR-4, "Removal and Installation".
Remove the steering wheel switch assembly screws (A), then
remove the steering wheel switches (1).
ALNIA0045ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-216
2008 Altima
Location of Antenna
INFOID:0000000003185299
M
AWNIA0748ZZ
1.
2.
4.
Satellite antenna
5.
6.
7.
Window Antenna
8.
Antenna amp.
9.
3.
Audio unit
INFOID:0000000003185300
AV
ELEMENT CHECK
P
AV-217
2008 Altima
SEL250I
SEL122R
2.
SEL252I
3.
SEL253I
AV-218
2008 Altima
REPAIRING PROCEDURE
1.
2.
3.
Wipe broken heat wire and its surrounding area clean with a
cloth dampened in alcohol.
Apply a small amount of conductive silver composition to tip of
drawing pen.
Shake silver composition container before use.
Place ruler on glass along broken line. Deposit conductive silver
composition on break with drawing pen. Slightly overlap existing
heat wire on both sides [preferably 5 mm (0.20 in)] of the break.
F
PIIA0215E
4.
After repair has been completed, check repaired wire for continuity. This check should be conducted 10 minutes after silver
composition is deposited.
Do not touch repaired area while test is being conducted.
SEL012D
5.
SEL013D
AV
AV-219
2008 Altima
INFOID:0000000003222309
ALNIA0044ZZ
1.
2.
3.
Audio unit
4.
Satellite antenna
5.
6.
7.
Window Antenna
8.
Antenna amp.
9.
INFOID:0000000003222310
ELEMENT CHECK
1.
SEL250I
AV-220
2008 Altima
C
SEL122R
2.
SEL252I
3.
AV
SEL253I
REPAIR EQUIPMENT
REPAIRING PROCEDURE
AV-221
2008 Altima
PIIA0215E
4.
After repair has been completed, check repaired wire for continuity. This check should be conducted 10 minutes after silver
composition is deposited.
Do not touch repaired area while test is being conducted.
SEL012D
5.
SEL013D
AV-222
2008 Altima
ANTENNA AMP.
[BOSE AUDIO WITHOUT NAVIGATION]
ANTENNA AMP.
INFOID:0000000003185302
REMOVAL
1.
2.
Remove the rear pillar finisher RH. Refer to INT-19, "Exploded View".
Detach the antenna amp harness clip (B), disconnect the
antenna amp connectors (A), remove the antenna amp screw
(C) and remove the antenna amp (1).
ALNIA0917ZZ
INSTALLATION
Installation is in the reverse order of removal.
G
INFOID:0000000003185303
REMOVAL
1.
2.
3.
Remove the rear pillar finisher RH. Refer to INT-40, "Exploded View".
Partially remove the side curtain air bag module RH to gain access to the antenna amp. Refer to SR-10,
"Removal and Installation".
Detach the antenna amp harness clip (A), disconnect the
antenna amp connectors (B), remove the antenna amp screw
(C) and remove the antenna amp (1).
L
ALNIA0043ZZ
INSTALLATION
AV-223
2008 Altima
MICROPHONE
[BOSE AUDIO WITHOUT NAVIGATION]
MICROPHONE
Removal and Installation - Coupe
INFOID:0000000003185304
ALNIA0928ZZ
3.
Remove the map lamp covers (1), then remove the map lamp
assembly cover (2).
NOTE:
This step and the following step are (non sunroof only).
ALNIA0929ZZ
4.
ALNIA0930ZZ
INSTALLATION
Installation is in the reverse order of removal.
INFOID:0000000003185305
REMOVAL
1.
2.
AV-224
2008 Altima
MICROPHONE
[BOSE AUDIO WITHOUT NAVIGATION]
C
ALNIA0057ZZ
INSTALLATION
Installation is in the reverse order of removal.
E
AV
AV-225
2008 Altima
TEL ANTENNA
[BOSE AUDIO WITHOUT NAVIGATION]
TEL ANTENNA
Removal and Installation - Coupe
INFOID:0000000003185306
REMOVAL
1.
2.
3.
4.
5.
Remove the trunk front finisher, trunk floor carpet and spare tire cover. Refer to INT-21, "Exploded View".
Remove the LH trunk floor spacer.
Remove the rear pillar LH. Refer to INT-19, "Exploded View".
Remove the rear parcel shelf. Refer to INT-16, "Removal and Installation".
Remove the Bluetooth antenna screw (A), then detach the Bluetooth antenna harness clips, disconnect the Bluetooth antenna
connector and remove the Bluetooth antenna (1).
ALNIA0921ZZ
INSTALLATION
Installation is in the reverse order of removal.
INFOID:0000000003185307
REMOVAL
1.
2.
Remove the rear parcel shelf. Refer to INT-36, "Removal and Installation".
Remove the Bluetooth antenna screw (A), fold down the rear
seat, disconnect the Bluetooth antenna connector and remove
the Bluetooth antenna (1).
ALNIA0058ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-226
2008 Altima
INFOID:0000000003185332
REMOVAL
1.
2.
3.
4.
F
ALNIA0920ZZ
INSTALLATION
Installation is in the reverse order of removal.
INFOID:0000000003185333
REMOVAL
1.
2.
Remove the rear parcel shelf. Refer to INT-36, "Removal and Installation".
Remove the Bluetooth control unit screws (A), disconnect the
Bluetooth control unit connectors and remove the Bluetooth control unit (2).
Satellite radio tuner (1)
AV
ALNIA0055ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-227
2008 Altima
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000001830453
OVERALL SEQUENCE
AWNIA0030GB
DETAILED FLOW
1.CHECK SYMPTOM
Check the malfunction symptoms by performing the following items.
Interview the customer to obtain the malfunction information (conditions and environment when the malfunction occurred).
Check the symptom.
>> GO TO 2
2.SELF-DIAGNOSIS (CONSULT-III)
1.
2.
AV-228
2008 Altima
>> GO TO 5
>> GO TO 6
1.
Perform self-diagnosis for MULTI AV with CONSULT-III after repairing or replacing the malfunctioning
parts.
2. Check if any DTC No. is displayed in the self-diagnosis results.
Is any DTC No. displayed?
YES >> GO TO 3
NO
>> GO TO 7
7.FINAL CHECK
Perform the operation check to confirm that the malfunction symptom is solved or that any other symptoms
are present.
Are any symptoms present?
YES >> GO TO 4
NO
>> Inspection End.
AV
AV-229
2008 Altima
INFOID:0000000001830454
This mode is used to modify the side distance guidelines if they are dislocated from the rear view monitor
image, because of variations of body/camera mounting conditions.
1.
2.
SKIA5637E
3.
SKIA6103E
4.
5.
6.
7.
8.
9.
Adjust the guide line touching X UP, X DOWN, Y UP or Y DOWN so that the corrected line can fit
the guide line.
10. Touch SAVE, and confirm the guide line.
Revision: July 2007
AV-230
2008 Altima
AV
AV-231
2008 Altima
FUNCTION DIAGNOSIS
MULTI AV SYSTEM (COUPE)
System Diagram
INFOID:0000000001830456
AWNIA0049GB
System Description
INFOID:0000000001830457
Reference page
Navigation system
AV-242
Audio system
AV-260
AV-253
AV-267
VOICE RECOGNITION
The multi AV system uses voice recognition to control functions of the following systems:
Navigation system
AV-232
2008 Altima
C
AWNIA0050GB
TOUCH PANEL
The multi AV system uses a touch panel display to control functions of the following systems:
Audio system
Navigation system
Hands-free phone system
H
AWNIA0051GB
AV
AV-233
2008 Altima
INFOID:0000000001830458
ALNIA0941GB
1.
2.
3.
CD changer M42
4.
5.
6.
AV-234
2008 Altima
8.
11.
Rear tweeter
LH B16
RH B100
13. Microphone R7
9.
Door speaker
LH D3
RH D103
Component Description
INFOID:0000000001830459
D
Part name
Description
AV control unit
Receives power (amp ON) and audio signals from AV control unit, and outputs
audio signals to each speaker.
CD changer
Door speaker
Front tweeter
Center speaker
Rear tweeter
Rear subwoofer
Camera image signal is input from rear view camera, and camera image is
indicated on the display
Power (camera ON signal) is sent to rear view camera
Controlled by AV communication sent from AV control unit
AV control unit recognizes the presence of camera system with camera connection recognition signal
Microphone
GPS antenna
AV
AV-235
2008 Altima
INFOID:0000000003214775
AWNIA0049GB
System Description
INFOID:0000000003214776
Reference page
Navigation system
AV-247
Audio system
AV-263
AV-256
AV-270
VOICE RECOGNITION
The multi AV system uses voice recognition to control functions of the following systems:
Navigation system
Hands-free phone system
AWNIA0050GB
AV-236
2008 Altima
AWNIA0051GB
AV
AV-237
2008 Altima
INFOID:0000000003214777
AV-238
2008 Altima
AV
O
AWNIA0760ZZ
AV-239
2008 Altima
AWNIA0761ZZ
1.
Tweeter LH M51
2.
3.
CD changer M42
4.
Tweeter RH M52
5.
6.
7.
8.
9.
11.
12. Antenna amp M502 (view with rear pillar finisher RH removed)
14. Microphone R7
Component Description
INFOID:0000000003214778
Part name
Description
AV control unit
Receives power (amp ON) and audio signals from AV control unit, and outputs
audio signals to each speaker.
CD changer
Tweeter
Center speaker
Rear subwoofer
Camera image signal is input from rear view camera, and camera image is
indicated on the display
Power (camera ON signal) is sent to rear view camera
Controlled by AV communication sent from AV control unit
AV control unit recognizes the presence of camera system with camera connection recognition signal
AV-240
2008 Altima
Description
Microphone
GPS antenna
Antenna amp.
AV
AV-241
2008 Altima
INFOID:0000000001830460
AWNIA0053GB
System Description
INFOID:0000000001830461
NOTE:
Refer to NAVI System Owner's Manual for system operation.
The navigation system periodically calculates the vehicle's current
position according to the following three signals: Travel distance of
the vehicle as determined by the vehicle speed sensor, turning angle
of the vehicle as determined by the gyroscope (angular velocity sensor), and the direction of vehicle travel as determined by the GPS
antenna (GPS information).
The current position of the vehicle is then identified by comparing the
calculated vehicle position with map data read from the map DVDROM, which is stored in the DVD-ROM drive (map-matching), and
indicated on the screen with a current-location mark.
AWNIA0054GB
SEL684V
TRAVEL DISTANCE
Travel distance calculations are based on the vehicle speed input signal. Therefore, the calculation may
become incorrect as the tires wear down. To prevent this, an automatic distance fine adjustment function has
been adopted.
TRAVEL DIRECTION
Change in the travel direction of the vehicle is calculated by a gyroscope (angular velocity sensor) and a GPS
antenna (GPS information). As the gyroscope and GPS antenna have both merit and demerit, input signals
Revision: July 2007
AV-242
2008 Altima
Type
Advantage
Disadvantage
Direction errors may accumulate when the vehicle is driven for long distances without stopping.
MAPMATCHING
Mapmatching is a function that repositions the vehicle on the road
map when a new location is judged to be the most accurate. This is
done by comparing the current vehicle position, calculated by the
method described in the position detection principle, with the road
map data around the vehicle, read from the map DVD-ROM stored in
the DVD-ROM drive.
Therefore, the vehicle position may not be corrected after the vehicle
is driven over a certain distance or time in which GPS information is
hard to receive. In this case, the current-location mark on the display
must be corrected manually.
CAUTION:
The road map data is based on data stored in the map DVDROM.
In map-matching, alternative routes to reach the destination will be
shown and prioritized, after the road on which the vehicle is currently driven has been judged and the current-location mark has
been repositioned.
If there is an error in distance and/or direction, the alternative
routes will be shown in different order of priority, and the wrong
road can be avoided.
If two roads are running in parallel, they are of the same priority.
Therefore, the current-location mark may appear on either of them
alternately, depending on maneuvering of the steering wheel and
configuration of the road.
Map-matching does not function correctly when the road on which
the vehicle is driving is new and not recorded in the map DVDROM, or when the road pattern stored in the map data and the
actual road pattern are different due to repair.
When driving on a road not present in the map, the map-matching
function may find another road and position the current-location
mark on it. Then, when the correct road is detected, the currentlocation mark may leap to it.
Effective range for comparing the vehicle position and travel direction calculated by the distance and direction with the road data
read from the map DVD-ROM is limited. Therefore, when there is
an excessive gap between the current vehicle position and the
position on the map, correction by map-matching is not possible.
SEL685V
SEL686V
AV
SKIA0613E
AV-243
2008 Altima
AV-244
2008 Altima
INFOID:0000000003220896
AV
P
ALNIA0941GB
1.
2.
3.
CD changer M42
4.
5.
6.
AV-245
2008 Altima
8.
9.
Door speaker
LH D3
RH D103
11.
Rear tweeter
LH B16
RH B100
13. Microphone R7
Component Description
INFOID:0000000001830463
Part name
Description
AV control unit
Voice guidance signal is input from AV control unit, and it is output to speakers.
Front tweeter
Microphone
GPS antenna
AV-246
2008 Altima
System Diagram
INFOID:0000000003214779
F
AWNIA0053GB
System Description
INFOID:0000000003214780
NOTE:
Refer to NAVI System Owner's Manual for system operation.
AWNIA0054GB
AV
O
SEL684V
TRAVEL DISTANCE
Travel distance calculations are based on the vehicle speed input signal. Therefore, the calculation may
become incorrect as the tires wear down. To prevent this, an automatic distance fine adjustment function has
been adopted.
TRAVEL DIRECTION
Change in the travel direction of the vehicle is calculated by a gyroscope (angular velocity sensor) and a GPS
antenna (GPS information). As the gyroscope and GPS antenna have both merit and demerit, input signals
Revision: July 2007
AV-247
2008 Altima
Advantage
Disadvantage
Direction errors may accumulate when the vehicle is driven for long distances without stopping.
MAPMATCHING
Mapmatching is a function that repositions the vehicle on the road
map when a new location is judged to be the most accurate. This is
done by comparing the current vehicle position, calculated by the
method described in the position detection principle, with the road
map data around the vehicle, read from the map DVD-ROM stored in
the DVD-ROM drive.
Therefore, the vehicle position may not be corrected after the vehicle
is driven over a certain distance or time in which GPS information is
hard to receive. In this case, the current-location mark on the display
must be corrected manually.
CAUTION:
The road map data is based on data stored in the map DVDROM.
In map-matching, alternative routes to reach the destination will be
shown and prioritized, after the road on which the vehicle is currently driven has been judged and the current-location mark has
been repositioned.
If there is an error in distance and/or direction, the alternative
routes will be shown in different order of priority, and the wrong
road can be avoided.
If two roads are running in parallel, they are of the same priority.
Therefore, the current-location mark may appear on either of them
alternately, depending on maneuvering of the steering wheel and
configuration of the road.
Map-matching does not function correctly when the road on which
the vehicle is driving is new and not recorded in the map DVDROM, or when the road pattern stored in the map data and the
actual road pattern are different due to repair.
When driving on a road not present in the map, the map-matching
function may find another road and position the current-location
mark on it. Then, when the correct road is detected, the currentlocation mark may leap to it.
Effective range for comparing the vehicle position and travel direction calculated by the distance and direction with the road data
read from the map DVD-ROM is limited. Therefore, when there is
an excessive gap between the current vehicle position and the
position on the map, correction by map-matching is not possible.
SEL685V
SEL686V
SKIA0613E
AV-248
2008 Altima
AV
AV-249
2008 Altima
INFOID:0000000003220899
AV-250
2008 Altima
AV
O
AWNIA0760ZZ
AV-251
2008 Altima
AWNIA0761ZZ
1.
Tweeter LH M51
2.
3.
CD changer M42
4.
Tweeter RH M52
5.
6.
7.
8.
9.
11.
12. Antenna amp M502 (view with rear pillar finisher RH removed)
14. Microphone R7
Component Description
INFOID:0000000003214782
Part name
Description
AV control unit
Voice guidance signal is input from AV control unit, and it is output to speakers.
Tweeter
Steering switches
Microphone
GPS antenna
AV-252
2008 Altima
A
INFOID:0000000001830464
D
AWNIA0132GB
System Description
INFOID:0000000001830465
When the selector is in the R position, the display shows a view to the rear of the vehicle. Lines which indicate
the vehicle clearance and distances are also displayed.
AV COMMUNICATION LINE
The rear view camera control unit is connected to the AV control unit using an AV communication line. This
line is used to transmit and receive data.
AV
AV-253
2008 Altima
INFOID:0000000003220895
ALNIA0941GB
1.
2.
3.
CD changer M42
4.
5.
6.
AV-254
2008 Altima
8.
11.
Rear tweeter
LH B16
RH B100
13. Microphone R7
9.
Door speaker
LH D3
RH D103
Component Description
INFOID:0000000001830467
D
Part name
Description
AV control unit
Camera image signal is sent from rear view camera control unit
AV
AV-255
2008 Altima
INFOID:0000000003214783
AWNIA0055GB
System Description
INFOID:0000000003214784
When the selector is in the R position, the display will show a view to the rear of the vehicle. Lines which indicate the vehicle clearance and distances are also displayed.
AV COMMUNICATION LINE
The rear view camera control unit is connected to the AV control unit using an AV communication line. This
line is used to transmit and receive data.
AV-256
2008 Altima
INFOID:0000000003220900
AV
AV-257
2008 Altima
AWNIA0760ZZ
AV-258
2008 Altima
AWNIA0761ZZ
1.
Tweeter LH M51
2.
3.
CD changer M42
4.
Tweeter RH M52
5.
6.
7.
8.
9.
12. Antenna amp M502 (view with rear pillar finisher RH removed)
11.
14. Microphone R7
H
15. Rear view camera control unit B31
(view with trunk side finisher LH removed)
Component Description
INFOID:0000000003214786
J
Part name
Description
AV control unit
Camera image signal is sent from rear view camera control unit
Receives reverse signal from park/neutral position (PNP) switch (with CVT
and QR25DE)
Receives reverse signal from back-up lamp relay (with CVT and VQ35DE)
Receives reverse signal from back up lamp switch (with M/T)
Receives rear view camera image signal
Sends camera ON signal to rear view camera
Sends image signal to AV control unit
AV
AV-259
2008 Altima
INFOID:0000000001830468
AWNIA0056GB
System Description
INFOID:0000000001830469
AUDIO SYSTEM
The audio system consists of the following components
AV control unit (audio unit)
BOSE speaker amp.
Window antenna
Steering wheel audio control switches
Door speakers
Front tweeters
Center speaker
Rear tweeters
Subwoofers
CD changer
When the audio system is on, radio signals are received by the window antenna. The audio unit then sends
audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio signals before sending
them to the door speakers, front tweeters, center speaker, rear tweeters and subwoofers.
Refer to Owner's Manual for audio system operating instructions.
AV-260
2008 Altima
INFOID:0000000003220892
AV
P
ALNIA0941GB
1.
2.
3.
CD changer M42
4.
5.
6.
AV-261
2008 Altima
8.
9.
Door speaker
LH D3
RH D103
11.
Rear tweeter
LH B16
RH B100
13. Microphone R7
Component Description
INFOID:0000000001830471
Part name
Description
AV control unit
Receives power (amp ON) and audio signals from AV control unit, and outputs
audio signals to each speaker.
CD changer
Door speaker
Front tweeter
Center speaker
Rear tweeter
Subwoofer
Satellite antenna
AV-262
2008 Altima
System Diagram
INFOID:0000000003214787
F
AWNIA0056GB
System Description
INFOID:0000000003214788
AUDIO SYSTEM
The audio system consists of the following components
AV control unit (audio unit)
BOSE speaker amp.
Window antenna
Antenna amp.
Steering wheel audio control switches
Front door speakers
Tweeters
Center speaker
Rear door speakers
Subwoofers
CD changer
When the audio system is on, radio signals are received by the window antenna. These signals are amplified
by the antenna amp. before reaching the audio unit. The audio unit then sends audio signals to the BOSE
speaker amp. The BOSE speaker amp. amplifies the audio signals before sending them to the front door
speakers, tweeters, center speaker, rear door speakers and subwoofers.
Refer to Owner's Manual for audio system operating instructions.
AV-263
2008 Altima
INFOID:0000000003220901
AV-264
2008 Altima
AV
O
AWNIA0760ZZ
AV-265
2008 Altima
AWNIA0761ZZ
1.
Tweeter LH M51
2.
3.
CD changer M42
4.
Tweeter RH M52
5.
6.
7.
8.
9.
11.
12. Antenna amp M502 (view with rear pillar finisher RH removed)
14. Microphone R7
Component Description
INFOID:0000000003214790
Part name
Description
AV control unit
Receives power (amp ON) and audio signals from AV control unit, and outputs
audio signals to each speaker.
CD changer
Tweeter
Center speaker
Suboofer
Antenna amp.
Satellite antenna
AV-266
2008 Altima
A
INFOID:0000000001830472
D
AWNIA0057GB
System Description
INFOID:0000000001830473
Refer to the owner's manual for Bluetooth telephone system operating instructions.
NOTE:
Cellular telephones must have their wireless connection set up (paired) before using the Bluetooth telephone
system.
Bluetooth telephone system allows users who have a Bluetooth cellular telephone to make a wireless connection between their cellular telephone and the AV control unit. Hands-free cellular telephone calls can be sent
and received. Some Bluetooth cellular telephones may not be recognized by the AV control unit. When a cellular telephone or the AV control unit is replaced, the telephone must be paired with the AV control unit. Different cellular telephones may have different pairing procedures. Refer to the cellular telephone operating
manual.
AV CONTROL UNIT
When the ignition switch is turned to ACC or ON, the AV control unit will power up. During power up, the AV
control unit is initialized and performs various self checks. Initialization may take up to 10 seconds. If a phone
is present in the vehicle and paired with the AV control unit, Nissan Voice Recognition will then become active.
Bluetooth telephone functions can be turned off using the Nissan Voice Recognition system.
MICROPHONE
The microphone is located in the roof console assembly. The microphone sends a signal to the AV control unit.
The microphone can be actively tested during self-diagnosis.
AV
AV-267
2008 Altima
INFOID:0000000003220894
ALNIA0941GB
1.
2.
3.
CD changer M42
4.
5.
6.
AV-268
2008 Altima
8.
11.
13. Microphone R7
9.
Door speaker
LH D3
RH D103
Rear tweeter
LH B16
RH B100
Component Description
INFOID:0000000001830475
D
Part name
Description
AV control unit
Inputs power (amp ON) and sound signal from AV control unit, and outputs
sound signal to each speaker.
Door speaker
Front tweeter
Receives telephone voice and voice guidance signals from the BOSE speaker
amp.
Center speaker
Microphone
AV
AV-269
2008 Altima
INFOID:0000000003214791
AWNIA0057GB
System Description
INFOID:0000000003214792
Refer to the owner's manual for Bluetooth telephone system operating instructions.
NOTE:
Cellular telephones must have their wireless connection set up (paired) before using the Bluetooth telephone
system.
Bluetooth telephone system allows users who have a Bluetooth cellular telephone to make a wireless connection between their cellular telephone and the AV control unit. Hands-free cellular telephone calls can be sent
and received. Personal memos can be created using the Nissan Voice Recognition system. Some Bluetooth
cellular telephones may not be recognized by the AV control unit. When a cellular telephone or the AV control
unit is replaced, the telephone must be paired with the AV control unit. Different cellular telephones may have
different pairing procedures. Refer to the cellular telephone operating manual.
AV CONTROL UNIT
When the ignition switch is turned to ACC or ON, the AV control unit will power up. During power up, the AV
control unit is initialized and performs various self checks. Initialization may take up to 10 seconds. During this
time the Bluetooth ON indicator will flash until initialization is complete. If a phone is present in the vehicle and
paired with the AV control unit, Nissan Voice Recognition will then become active and the Bluetooth ON indicator will remain on. Bluetooth telephone functions can be turned off using the Nissan Voice Recognition system.
MICROPHONE
The microphone is located in the roof console assembly. The microphone sends a signal to the AV control unit.
The microphone can be actively tested during self-diagnosis.
AV-270
2008 Altima
INFOID:0000000003220902
AV
AV-271
2008 Altima
AWNIA0760ZZ
AV-272
2008 Altima
AWNIA0761ZZ
1.
Tweeter LH M51
2.
3.
CD changer M42
4.
Tweeter RH M52
5.
6.
7.
8.
9.
12. Antenna amp M502 (view with rear pillar finisher RH removed)
11.
14. Microphone R7
H
15. Rear view camera control unit B31
(view with trunk side finisher LH removed)
Component Description
INFOID:0000000003214794
J
Part name
Description
AV control unit
Inputs power (amp ON) and sound signal from AV control unit, and outputs
sound signal to each speaker.
Tweeter
Center speaker
Microphone
AV
AV-273
2008 Altima
INFOID:0000000001830476
DESCRIPTION
Diagnosis function consists of the self-diagnosis mode performed automatically and the CONFIRMATION/
ADJUSTMENT mode operated manually.
Self-diagnosis mode checks for connections between the units constituting this system, analyzes each individual unit at the same time, and displays the results on the LCD screen.
CONFIRMATION/ADJUSTMENT mode is used to perform trouble diagnosis that requires operation and
judgment by an operator (trouble that cannot be automatically judged by the system), to check/change the
set value, and to display the History of Errors of the multi AV system.
DIAGNOSIS ITEM
Mode
Description
Self-diagnosis
Display diagnosis
CONFIRMATION/
ADJUSTMENT
Color tone of the screen can be checked by the display of a color bar.
Gradation bar
Touch panel
Vehicle signals
The following vehicle signals are analyzed: Vehicle speed signal, parking brake signal, light signal, ignition switch signal, and reverse signal.
Speaker test
Navigation
Error history
Handsfree phone
Bluetooth
XM SAT
Handsfree volume
adjustment
Voice microphone
test
Delete handsfree
memory
Confirm / Change
Passkey
Confirm / Change
Device Key
OPERATION PROCEDURE
1.
2.
3.
AWNIA0058ZZ
AV-274
2008 Altima
C
ALNIA0086ZZ
SELF-DIAGNOSIS
1.
ALNIA0087ZZ
2.
Diagnosis results are displayed after the self-diagnosis is completed. The unit names and the connection lines are color-coded
according to the diagnostic results.
Diagnosis results
Normal
Connection malfunction
Unit malfunction
Note
Unit
Connection
line
Green
Yellow
Green
Green
Gray
Red
K
ALNIA0088ZZ
Note:
3.
Select a switch on the SELF DIAGNOSIS screen and comments for the diagnosis results will be shown.
AV
P
ALNIA0089ZZ
Self-Diagnosis Results
AV-275
2008 Altima
Description
GPS antenna
ALNIA0090GB
ALNIA0091GB
ALNIA0092GB
AV-276
2008 Altima
Description
B
No diagnosis due to internal malfunction of CD changer
D
ALNIA0093GB
E
CD changer power supply and
ground circuits
A malfunction is detected in communication circuit between AV control unit and CD changer (REQ1
signal or communication signal)
A malfunction is detected in communication signal between AV control unit and CD changer (REQ1
signal or communication signal)
ALNIA0094GB
CONFIRMATION/ADJUSTMENT MODE
1.
2.
Start the diagnosis function and select Confirmation/Adjustment. The confirmation/adjustment mode
indicates where each item can be checked or adjusted.
Select each button on the Confirmation/Adjustment Mode
screen to display the relevant trouble diagnosis screen. Press
the BACK button to return to the initial Confirmation/Adjustment Mode screen.
L
ALNIA0095ZZ
AV
AV-277
2008 Altima
AWNIA0059GB
Vehicle Signals
A comparison check can be made of each actual vehicle signal and
the signals recognized by the system.
ALNIA0096ZZ
Diagnosis item
Vehicle speed
Display
ON
OFF
Parking brake
Vehicle status
ON
OFF
AV-278
Remarks
2008 Altima
Ignition
Reverse
Display
Vehicle status
ON
Light switch ON
OFF
ON
Ignition switch ON
OFF
ON
OFF
Remarks
Block the light beam from the auto light optical sensor.
C
Changes in indication may be delayed by approximately 1.5 seconds. This is normal.
Speaker Test
Select SPEAKER TEST to display the speaker diagnosis screen. Press START to generate a test tone in
speakers. Press End to stop the test tones.
NOTE:
The speakers are tested in the following order:
Front left tweeter > front center > front right tweeter > front right >
rear right > woofer > rear left > front left
ALNIA0097ZZ
Navigation
The XM NavTraffic subscription status can be checked.
ALNIA0098ZZ
M
Error History
The error record displays the time and place of the most recent occurrence of that error. However, take note of
the following points.
If there is a malfunction with the GPS antenna circuit board in the AV control unit, the correct date and time AV
of occurrence may not be able to be displayed.
Place of the error occurrence is represented by the position of the current location mark at the time an error
occurred. If current location mark has deviated from the correct position, then the place of the error occur- O
rence cannot be located correctly.
Vehicle CAN Diagnosis
P
AV-279
2008 Altima
Malfunction counter
(Past)
Rx (ECM)
OK / UNKWN
OK / 0 - 39
Rx (Cluster)
OK / UNKWN
OK / 0 - 39
not used
Items
Rx (HEV)
ALNIA0183ZZ
Handsfree Phone
The hands-free phone reception volume adjustment, microphone
test and memory erase functions are available.
ALNIA0100ZZ
Bluetooth
Passkey confirmation/change
The passkey of Bluetooth can be confirmed and changed.
The passkey can be changed by four digits within 0 to 9.
ALNIA0101ZZ
ALNIA0102ZZ
XM SAT
AV-280
2008 Altima
C
ALNIA0103ZZ
Change Application ID
- Any application ID's required to receive traffic information from the
satellite radio system can be set.
G
ALNIA0104ZZ
Change EXT ID
- Any EXT ID's required to receive traffic information from the satellite radio system can be set.
K
ALNIA0105ZZ
INFOID:0000000001830477
CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.
MULTI AV diagnosis mode
Description
SELF-DIAG RESULTS
DATA MONITOR
AV COMM MONITOR
Allows the technician to monitor the status of the Multi AV system communication signals.
AV
SELF-DIAG RESULTS
Display Item List
Refer to AV-377, "DTC Index".
DATA MONITOR
Display Item List
AV-281
2008 Altima
ALL
SIGNALS
SELECTION
FROM MENU
Description
Displays ON when vehicle speed > 0 km/h. Displays OFF when vehicle speed = 0 km/h.
AV-282
2008 Altima
COMPONENT DIAGNOSIS
INFOID:0000000001830478
INFOID:0000000001830479
DTC Logic
DTC DETECTION LOGIC
D
DTC
CONSULT-III display
U1000
Detection condition
When AV control unit is not transmitting or receiving CAN communication signals for 2 seconds or more.
Diagnosis Procedure
INFOID:0000000001830480
Symptom: Displays CAN COMM CIRCUIT [U1000] as a self-diagnosis result of AV control unit.
AV
AV-283
2008 Altima
INFOID:0000000001830481
DTC Logic
INFOID:0000000001830482
CONSULT-III display
Detection condition
U1010
When a malfunction is detected during initial diagnosis for CAN controller of each control unit.
Diagnosis Procedure
INFOID:0000000001830483
Symptom: Displays CONTROL UNIT (CAN) [U1010] as a self-diagnosis result of AV control unit.
AV-284
2008 Altima
Description
INFOID:0000000001830484
DTC Logic
INFOID:0000000001830485
CONSULT-III display
U1200
Detection condition
An internal malfunction is detected in AV control unit
(FLASH-ROM).
Action to take
Replace AV control unit. Refer
to AV-422, "Removal and Installation".
AV
AV-285
2008 Altima
INFOID:0000000001830486
DTC Logic
INFOID:0000000001830487
CONSULT-III display
GYRO NO CONN
[U1201]
Detection condition
Action to take
AV-286
2008 Altima
Description
INFOID:0000000001830488
DTC Logic
INFOID:0000000001830489
CONSULT-III display
GPS COMM
[U1204]
Detection condition
Action to take
AV
AV-287
2008 Altima
INFOID:0000000001830490
DTC Logic
INFOID:0000000001830491
CONSULT-III display
GPS ROM
[U1205]
Detection condition
Action to take
AV-288
2008 Altima
Description
INFOID:0000000001830492
DTC Logic
INFOID:0000000001830493
CONSULT-III display
GPS RAM
[U1206]
Detection condition
Action to take
AV
AV-289
2008 Altima
INFOID:0000000001830494
DTC Logic
INFOID:0000000001830495
CONSULT-III display
GPS RTC
[U1207]
Detection condition
Action to take
AV-290
2008 Altima
Description
INFOID:0000000001830496
DTC Logic
INFOID:0000000001830497
CONSULT-III display
DVD-ROM COMM
[U1208]
Detection condition
D
An internal malfunction is detected in AV control unit (DVD-ROM).
Diagnosis Procedure
INFOID:0000000001830498
1.CHECK DVD-ROM
Check DVD-ROM for dirt, scratches and warpage.
Is the DVD-ROM clean and undamaged?
OK
>> Replace AV control unit. Refer to AV-422, "Removal and Installation".
NG
>> Replace DVD-ROM map.
AV
AV-291
2008 Altima
INFOID:0000000001830499
DTC Logic
INFOID:0000000001830500
CONSULT-III display
DVD-ROM READ
[U1209]
Detection condition
An internal malfunction is detected in AV control unit (DVD-ROM).
Diagnosis Procedure
INFOID:0000000001830501
1.CHECK DVD-ROM
Check DVD-ROM for dirt, scratches and warpage.
Is the DVD-ROM clean and undamaged?
YES >> Replace AV control unit. Refer to AV-422, "Removal and Installation".
NO
>> Replace DVD-ROM map.
AV-292
2008 Altima
Description
INFOID:0000000001830502
DTC Logic
INFOID:0000000001830503
CONSULT-III display
DVD-ROM DISC
[U120A]
Detection condition
D
An internal malfunction is detected in AV control unit (DVD-ROM).
Diagnosis Procedure
INFOID:0000000001830504
1.CHECK DVD-ROM
Check DVD-ROM for dirt, scratches and warpage.
Is the DVD-ROM clean and undamaged?
YES >> Replace AV control unit. Refer to AV-422, "Removal and Installation".
NO
>> Replace DVD-ROM map.
AV
AV-293
2008 Altima
INFOID:0000000001830505
DTC Logic
INFOID:0000000001830506
CONSULT-III display
U120C
Detection condition
An internal malfunction is detected in AV control unit (DVD-ROM).
Diagnosis Procedure
INFOID:0000000001830507
1.CHECK DVD-ROM
Check DVD-ROM for dirt, scratches and warpage.
Is the DVD-ROM clean and undamaged?
YES >> Replace AV control unit. Refer to AV-422, "Removal and Installation".
NO
>> Replace DVD-ROM map.
AV-294
2008 Altima
Description
INFOID:0000000001830508
DTC Logic
INFOID:0000000001830509
CONSULT-III display
DVD-ROM MECHA
[U120D]
Detection condition
D
An internal malfunction is detected in AV control unit (DVD-ROM).
Diagnosis Procedure
INFOID:0000000001830510
1.CHECK DVD-ROM
Check DVD-ROM for dirt, scratches and warpage.
Is the DVD-ROM clean and undamaged?
YES >> Replace AV control unit. Refer to AV-422, "Removal and Installation".
NO
>> Replace DVD-ROM map.
AV
AV-295
2008 Altima
INFOID:0000000001830511
DTC Logic
INFOID:0000000001830512
CONSULT-III display
DVD-ROM SEEK
[U1210]
Detection condition
An internal malfunction is detected in AV control unit (DVD-ROM).
Diagnosis Procedure
INFOID:0000000001830513
1.CHECK DVD-ROM
Check DVD-ROM for dirt, scratches and warpage.
Is the DVD-ROM clean and undamaged?
YES >> Replace AV control unit. Refer to AV-422, "Removal and Installation".
NO
>> Replace DVD-ROM map.
AV-296
2008 Altima
Description
INFOID:0000000001830514
DTC Logic
INFOID:0000000001830515
CONSULT-III display
U1212
Detection condition
D
An internal malfunction is detected in AV control unit (DVD-ROM).
Diagnosis Procedure
INFOID:0000000001830516
1.CHECK DVD-ROM
AV
AV-297
2008 Altima
INFOID:0000000001830517
DTC Logic
INFOID:0000000001830518
CONSULT-III display
DVD-ROM DATA
[U1213]
Detection condition
An internal malfunction is detected in AV control unit (DVD-ROM).
Diagnosis Procedure
INFOID:0000000001830519
1.CHECK DVD-ROM
Check DVD-ROM for dirt, scratches and warpage.
Is the DVD-ROM clean and undamaged?
YES >> Replace AV control unit. Refer to AV-422, "Removal and Installation".
NO
>> Replace DVD-ROM map.
AV-298
2008 Altima
Description
INFOID:0000000001830520
DTC Logic
INFOID:0000000001830521
CONSULT-III display
DVD-ROM TIMEOUT
[U1214]
Detection condition
D
An internal malfunction is detected in AV control unit (DVD-ROM).
Diagnosis Procedure
INFOID:0000000001830522
1.CHECK DVD-ROM
Check DVD-ROM for dirt, scratches and warpage.
Is the DVD-ROM clean and undamaged?
YES >> Replace AV control unit. Refer to AV-422, "Removal and Installation".
NO
>> Replace DVD-ROM map.
AV
AV-299
2008 Altima
INFOID:0000000001830523
DTC Logic
INFOID:0000000001830524
CONSULT-III display
DVD-ROM LOAD
[U1215]
Detection condition
An internal malfunction is detected in AV control unit (DVD-ROM).
Diagnosis Procedure
INFOID:0000000001830525
1.CHECK DVD-ROM
Check DVD-ROM for dirt, scratches and warpage.
Is the DVD-ROM clean and undamaged?
YES >> Replace AV control unit. Refer to AV-422, "Removal and Installation".
NO
>> Replace DVD-ROM map.
AV-300
2008 Altima
Description
INFOID:0000000001830526
DTC Logic
INFOID:0000000001830527
CONSULT-III display
CAN CONT
[U1216]
Detection condition
Action to take
AV
AV-301
2008 Altima
INFOID:0000000001830528
DTC Logic
INFOID:0000000001830529
CONSULT-III display
BLUETOOTH CONN
[U1217]
Detection condition
Action to take
AV-302
2008 Altima
Description
INFOID:0000000001830530
DTC Logic
INFOID:0000000001830531
CONSULT-III display
XM SERIAL COMM
[U1220]
Detection condition
Action to take
An internal malfunction is detected in AV control unit (satellite radio tuner communication malfunction).
AV
AV-303
2008 Altima
INFOID:0000000001830532
DTC Logic
INFOID:0000000001830533
CONSULT-III display
U1244
Detection condition
GPS antenna connection malfunction is detected.
Diagnosis Procedure
INFOID:0000000001830534
: Approx. 5V
AV-304
2008 Altima
U124C CD CHANGER
[BOSE AUDIO WITH NAVIGATION]
U124C CD CHANGER
Description
INFOID:0000000001830535
DTC Logic
INFOID:0000000001830536
U124C
CONSULT-III display
N-BUS CD CHG CONN
[U124C]
Detection condition
A malfunction is detected in CD changer power supply and ground circuits
Malfunction occurs in request signal circuit. (Between CD changer and AV control unit)
Malfunction occurs in communication signal circuit. (Between CD changer and AV control
unit)
Diagnosis Procedure
Check CD changer power supply and ground circuit. Refer to AV-310, "CD CHANGER : Diagnosis Procedure".
Do power and ground check OK?
YES >> GO TO 2
NO
>> Repair power supply or ground circuit.
INFOID:0000000001830537
1.
2.
3.
L
ALLIA0236ZZ
8, 9, 10 - Ground
AV
8 - Ground
SKIA9299J
AV-305
ALLIA0237ZZ
2008 Altima
U124C CD CHANGER
[BOSE AUDIO WITH NAVIGATION]
< COMPONENT DIAGNOSIS >
Are the voltage readings as specified?
YES >> GO TO 4
NO
>> Replace CD changer. Refer to AV-424, "Removal and Installation".
SKIA9300J
ALLIA0238ZZ
SKIA9300J
ALLIA0239ZZ
AV-306
2008 Altima
AV CONTROL UNIT
AV CONTROL UNIT : Diagnosis Procedure
INFOID:0000000001830538
1.CHECK FUSE
Check that the following fuses of the AV control unit are not blown.
Unit
Terminals
Signal name
C
Fuse No.
20
Battery power
24
19
10
AV control unit
(-)
Terminal
20
M47
Value (Approx.)
OFF
Ground
Battery voltage
ACC
10
ON
ALLIA0241ZZ
Continuity
Ground
AV
ALLIA0242ZZ
INFOID:0000000001830539
1.CHECK FUSE
Check that the following fuses of the rear view camera control unit are not blown.
Unit
Rear view camera control unit
Terminals
Signal name
Fuse No.
Battery power
24
19
AV-307
2008 Altima
Terminal
1
B31
(-)
Ignition switch
position
Value (Approx.)
OFF
Ground
Battery voltage
ACC
ALLIA0244ZZ
Continuity
Ground
INFOID:0000000001830540
Terminal
T7
(-)
Transmission position
Value (Approx.)
Ground
Reverse
6V
AV-308
2008 Altima
4.
Signal name
Continuity
Camera ON signal
C
ALLIA0246ZZ
Signal name
Continuity
Camera ON signal
Terminal
B31
(-)
Condition
Value (Approx.)
Ground
Reverse
6V
I
ALLIA0247ZZ
1.
2.
3.
Signal name
Continuity
Ground
AV
ALLIA0248ZZ
INFOID:0000000001830541
1.CHECK FUSE
Check that the following fuses of the BOSE speaker amp. are not blown.
Unit
BOSE speaker amp.
Terminals
50
51
Signal name
Battery power
Fuse No.
25
26
AV-309
2008 Altima
(-)
Voltage (approx.)
Ground
Battery voltage
Terminal
50
B122
51
ALNIA0128ZZ
Terminal
47
B122
52
Continuity
Ground
Yes
ALNIA0129ZZ
CD CHANGER
CD CHANGER : Diagnosis Procedure
INFOID:0000000001830542
1.CHECK FUSE
Check that the following fuses of the CD changer are not blown.
Unit
Terminals
CD changer
Signal name
Fuse No.
12
Battery power
24
16
19
Terminal
12
16
(-)
Ground
Value (Approx.)
Battery voltage
AV-310
2008 Altima
MICROPHONE
A
INFOID:0000000001830543
Terminal
R7
(-)
Ignition
switch position
Value (Approx.)
Ground
ON
5V
E
WKIA5796E
4.
Signal name
Continuity
ALLIA0250ZZ
Signal name
Continuity
Terminal
M46
46
(-)
Ignition switch
position
Value (Approx.)
Ground
ACC
5V
AV
ALLIA0251ZZ
AV-311
2008 Altima
Continuity
Ground
AV-312
2008 Altima
AV CONTROL UNIT
AV CONTROL UNIT : Diagnosis Procedure
INFOID:0000000003221737
1.CHECK FUSE
Check that the following fuses of the AV control unit are not blown.
Unit
Terminals
Signal name
C
Fuse No.
20
Battery power
24
19
10
AV control unit
(-)
Terminal
20
M47
Value (Approx.)
OFF
Ground
Battery voltage
ACC
10
ON
ALLIA0241ZZ
Continuity
Ground
AV
ALLIA0242ZZ
INFOID:0000000003221738
1.CHECK FUSE
Check that the following fuses of the rear view camera control unit are not blown.
Unit
Rear view camera control unit
Terminals
Signal name
Fuse No.
Battery power
24
19
AV-313
2008 Altima
(-)
Terminal
1
B31
Ignition switch
position
OFF
Ground
Value (Approx.)
Battery voltage
ACC
ALLIA0244ZZ
Continuity
Ground
INFOID:0000000003214797
Terminal
Transmission position
Value (Approx.)
B35
Reverse
6V
AV-314
2008 Altima
4.
Signal name
Continuity
Camera ON signal
Continuity
Camera ON signal
ALLIA0246ZZ
Terminal
Transmission position
Value (Approx.)
B31
Reverse
6V
ALLIA0247ZZ
1.
2.
3.
Continuity
Ground
AV
ALLIA0248ZZ
INFOID:0000000003221739
1.CHECK FUSE
Check that the following fuses of the BOSE speaker amp. are not blown.
Unit
BOSE speaker amp.
Terminals
50
51
Signal name
Battery power
AV-315
Fuse No.
25
26
2008 Altima
(-)
Voltage (approx.)
Ground
Battery voltage
Terminal
50
B122
51
ALNIA0128ZZ
Terminal
47
B122
52
Continuity
Ground
Yes
ALNIA0129ZZ
CD CHANGER
CD CHANGER : Diagnosis Procedure
INFOID:0000000003221740
1.CHECK FUSE
Check that the following fuses of the CD changer are not blown.
Unit
Terminals
CD changer
Signal name
Fuse No.
12
Battery power
24
16
19
AV-316
2008 Altima
(-)
Terminal
12
M42
16
OFF
Ground
Value (Approx.)
Battery voltage
ACC
C
ALLIA0249ZZ
MICROPHONE
INFOID:0000000003221741
F
(+)
Connector
Terminal
R7
(-)
Ignition
switch position
Value (Approx.)
Ground
ON
5V
H
WKIA5796E
4.
Signal name
Continuity
Continuity
ALLIA0250ZZ
AV
AV-317
2008 Altima
Terminal
M46
46
(-)
Ignition switch
position
Value (Approx.)
Ground
ACC
5V
ALLIA0251ZZ
Continuity
Ground
AV-318
2008 Altima
Description
INFOID:0000000001830544
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio
signals before sending them to the door speakers using the audio signal circuits.
Diagnosis Procedure
INFOID:0000000001830545
1.HARNESS CHECK
1.
2.
E
A
Connector
B
Terminal
Connector
58
B121
D3
59
71
D103
72
3.
Terminal
Continuity
1
2
1
Yes
Check continuity between BOSE speaker amp. harness connector B121 (A) and ground.
A
Connector
Terminal
Continuity
Ground
No
58
B121
59
71
J
ALNIA0134ZZ
72
AV
AV-319
2008 Altima
Connector
B121
(+)
(-)
58
59
71
Reference
signal
Condition
Receive
audio signal
72
SKIA0177E
ALNIA0135ZZ
3.HARNESS CHECK
1.
2.
B
Terminal
Connector
Terminal
2
M47
75
76
B121
11
73
12
3.
Continuity
Yes
74
Terminal
Continuity
Ground
No
2
M47
3
11
ALNIA0136ZZ
12
AV-320
2008 Altima
Connector
Terminals
(+)
(-)
Condition
Reference
signal
D
M47
11
12
Receive
audio signal
E
SKIA0177E
G
ALNIA0171ZZ
AV
AV-321
2008 Altima
INFOID:0000000003214803
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio
signals before sending them to the front door speakers using the audio signal circuits.
Diagnosis Procedure
INFOID:0000000003214804
1.HARNESS CHECK
1.
2.
B
Terminal
Connector
58
B121
D3
59
71
D103
72
3.
Terminal
Continuity
1
2
1
Yes
Check continuity between BOSE speaker amp. harness connector B121 (A) and ground.
A
Connector
Terminal
Continuity
Ground
No
58
B121
59
71
ALNIA0134ZZ
72
AV-322
2008 Altima
Connector
(+)
(-)
58
59
Reference
signal
Condition
D
B121
71
Receive
audio signal
72
E
SKIA0177E
G
ALNIA0135ZZ
3.HARNESS CHECK
1.
2.
A
Connector
B
Terminal
Connector
Terminal
2
M47
Continuity
75
76
B121
11
73
12
3.
Yes
74
A
Connector
Terminal
Continuity
Ground
No
2
M47
3
11
AV
ALNIA0136ZZ
12
AV-323
2008 Altima
Connector
M47
Terminals
(+)
(-)
11
12
Condition
Reference
signal
Receive
audio signal
SKIA0177E
AV-324
ALNIA0171ZZ
2008 Altima
Description
INFOID:0000000001830546
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio
signals before sending them to the front tweeters using the audio signal circuits.
Diagnosis Procedure
INFOID:0000000001830547
1.HARNESS CHECK
1.
2.
E
A
Connector
B
Terminal
Connector
41
B122
M51
42
44
M52
43
3.
Terminal
Continuity
1
2
1
Yes
Check continuity between BOSE speaker amp. harness connector B122 (A) and ground.
A
Connector
Terminal
Continuity
Ground
No
41
B122
42
44
J
ALNIA0137ZZ
43
AV
AV-325
2008 Altima
Connector
B122
(+)
(-)
41
42
44
Reference
signal
Condition
Receive
audio signal
43
SKIA0177E
3.HARNESS CHECK
1.
2.
B
Terminal
Connector
Terminal
2
M47
75
76
B121
11
73
12
3.
Continuity
Yes
74
Terminal
Continuity
Ground
No
2
M47
3
11
ALNIA0136ZZ
12
AV-326
2008 Altima
Connector
Terminals
(+)
(-)
Condition
Reference
signal
D
M47
11
12
Receive
audio signal
E
SKIA0177E
G
ALNIA0171ZZ
AV
AV-327
2008 Altima
TWEETER (SEDAN)
[BOSE AUDIO WITH NAVIGATION]
TWEETER (SEDAN)
Description
INFOID:0000000003214805
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio
signals before sending them to the tweeters using the audio signal circuits.
Diagnosis Procedure
INFOID:0000000003214806
1.HARNESS CHECK
1.
2.
B
Terminal
Connector
41
B122
M51
42
44
M52
43
3.
Continuity
Terminal
1
2
1
Yes
Check continuity between BOSE speaker amp. harness connector B122 (A) and ground.
Terminals
A
Connector
Terminal
Continuity
41
B122
42
44
ALNIA0137ZZ
Ground
No
43
AV-328
2008 Altima
TWEETER (SEDAN)
[BOSE AUDIO WITH NAVIGATION]
< COMPONENT DIAGNOSIS >
1. Connect BOSE speaker amp. connector B122 and suspect
tweeter connector.
2. Turn ignition switch to ACC.
3. Push POWER switch.
4. Check the signal between BOSE speaker amp. harness connector B122 terminals with CONSULT-III or oscilloscope.
Terminals
Connector
(+)
(-)l
41
42
Reference
signal
Condition
D
B122
44
Receive
audio signal
43
E
SKIA0177E
G
ALNIA0138ZZ
3.HARNESS CHECK
1.
2.
Terminals
A
Connector
B
Terminal
M47
Connector
Terminal
75
76
B121
11
73
12
3.
Continuity
K
Yes
74
Terminal
Continuity
2
M47
3
11
AV
ALNIA0136ZZ
Ground
No
12
AV-329
2008 Altima
TWEETER (SEDAN)
[BOSE AUDIO WITH NAVIGATION]
< COMPONENT DIAGNOSIS >
1. Connect AV control unit connector and BOSE speaker amp.
connector.
2. Turn ignition switch to ACC.
3. Push POWER switch.
4. Check the signal between AV control unit harness connector terminals with CONSULT-III or oscilloscope.
Connector
M47
Terminals
(+)
(-)
11
12
Condition
Reference
signal
Receive
audio signal
SKIA0177E
AV-330
ALNIA0171ZZ
2008 Altima
CENTER SPEAKER
[BOSE AUDIO WITH NAVIGATION]
CENTER SPEAKER
Description
INFOID:0000000001830548
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio
signals before sending them to the center speaker using the audio signal circuits.
Diagnosis Procedure
INFOID:0000000001830549
1.HARNESS CHECK
1.
2.
E
A
Connector
B
Terminal
69
B121
3.
Connector
M151
70
Terminal
Continuity
Yes
Check continuity between BOSE speaker amp. harness connector B121 (A) and ground.
A
Connector
Terminal
69
B121
70
Continuity
Ground
No
ALNIA0139ZZ
Connector
Terminals
(+)
(-)
Condition
Reference
signal
AV
ALNIA0140ZZ
B121
69
70
Receive
audio signal
P
SKIA0177E
3.HARNESS CHECK
Revision: July 2007
AV-331
2008 Altima
CENTER SPEAKER
[BOSE AUDIO WITH NAVIGATION]
< COMPONENT DIAGNOSIS >
1. Disconnect AV control unit connector M47 and BOSE speaker
amp. connector B121.
2. Check continuity between audio unit harness connector M47 (A)
and BOSE speaker amp. harness connector B121 (B).
A
Connector
Terminal
Connector
Terminal
75
M47
76
B121
11
Yes
73
12
3.
Continuity
74
Continuity
Ground
No
Terminal
2
3
M47
11
ALNIA0136ZZ
12
Connector
M47
Terminals
(+)
(-)
11
12
Condition
Reference
signal
Receive
audio signal
SKIA0177E
AV-332
ALNIA0171ZZ
2008 Altima
Description
INFOID:0000000001830550
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio
signals before sending them to the rear tweeters using the audio signal circuits.
Diagnosis Procedure
INFOID:0000000001830551
1.HARNESS CHECK
1.
2.
Terminal
A: B121
B: B122
3.
Connector
55
C: D202
68
49
C: D302
54
Terminal
Continuity
2
1
2
Yes
Check continuity between BOSE speaker amp. harness connectors B121 (A) and B122 (B) and ground.
Connector
A: B121
B: B122
Terminal
Continuity
68
55
49
Ground
No
54
ALNIA0141ZZ
AV
AV-333
2008 Altima
Connector
A: B121
B: B122
(+)
(-)
68
55
54
Reference
signal
Condition
Receive
audio signal
49
SKIA0177E
ALNIA0142ZZ
3.HARNESS CHECK
1.
2.
Disconnect AV control unit connector M47 and BOSE speaker amp. connector B121.
Check continuity between AV control unit harness connector
M47 (A) and BOSE speaker amp. harness connector B121 (B).
A
Connector
B
Terminal
Connector
Terminal
5
M47
64
63
B121
14
66
15
3.
Continuity
Yes
65
ALLIA0253ZZ
Terminal
Continuity
Ground
No
5
M47
6
14
15
AV-334
2008 Altima
Connector
Terminals
(+)
(-)
Condition
Reference
signal
D
M47
14
15
Receive audio
signal
E
SKIA0177E
G
ALNIA0172ZZ
AV
AV-335
2008 Altima
INFOID:0000000003214807
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio
signals before sending them to the rear door speakers using the audio signal circuits.
Diagnosis Procedure
INFOID:0000000003214808
1.HARNESS CHECK
1.
2.
Terminal
A: B121
B: B122
3.
Connector
55
C: D202
68
49
C: D302
54
Terminal
Continuity
2
1
2
Yes
Check continuity between BOSE speaker amp. harness connectors B121 (A) and B122 (B) and ground.
Connector
A: B121
B: B122
Terminal
Continuity
Ground
No
68
55
49
54
ALNIA0141ZZ
AV-336
2008 Altima
Connector
A: B121
B: B122
(+)
(-)l
68
55
54
Reference
signal
Condition
D
Receive
audio signal
49
SKIA0177E
G
ALNIA0142ZZ
3.HARNESS CHECK
1.
2.
Disconnect AV control unit connector M47 and BOSE speaker amp. connector B121.
Check continuity between AV control unit harness connector
M47 (A) and BOSE speaker amp. harness connector B121 (B).
I
A
Connector
B
Terminal
Connector
Terminal
5
M47
64
63
B121
14
66
15
3.
Continuity
Yes
65
K
ALLIA0253ZZ
Terminal
Continuity
Ground
No
5
M47
6
14
AV
15
AV-337
2008 Altima
Connector
M47
Terminals
(+)
(-)
14
15
Condition
Reference
signal
Receive audio
signal
SKIA0177E
AV-338
ALNIA0172ZZ
2008 Altima
SUBWOOFER
[BOSE AUDIO WITH NAVIGATION]
SUBWOOFER
Description
INFOID:0000000001830552
The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio
signals before sending them to the subwoofers using the audio signal circuits.
Diagnosis Procedure
INFOID:0000000001830553
1.HARNESS CHECK
1.
2.
E
A
Connector
B
Terminal
Connector
53
B122
B120
48
45
B124
46
3.
Terminal
Continuity
1
2
1
Yes
Check continuity between BOSE speaker amp. harness connector B122 (A) and ground.
A
Connector
Terminal
Continuity
Ground
No
53
B122
48
45
J
ALNIA0145ZZ
46
AV
AV-339
2008 Altima
SUBWOOFER
[BOSE AUDIO WITH NAVIGATION]
< COMPONENT DIAGNOSIS >
1. Connect BOSE speaker amp. connector B122 and suspect rear
subwoofer connector.
2. Turn ignition switch to ACC.
3. Push POWER switch.
4. Check the signal between BOSE speaker amp. harness connector B122 terminals with CONSULT-III or oscilloscope.
Terminals
Connector
B122
(+)
(-)
53
48
45
46
Reference
signal
Condition
SKIA0177E
ALNIA0932GB
3.HARNESS CHECK
1.
2.
Disconnect AV control unit connector M47 and BOSE speaker amp. connector B121.
Check continuity between AV control unit harness connector
M47 (A) and BOSE speaker amp. harness connector B121 (B).
A
Connector
B.
Terminal
Connector
Terminal
5
M47
64
63
B121
14
66
15
3.
Continuity
Yes
65
ALLIA0253ZZ
Continuity
Ground
No
Terminal
5
M47
6
14
15
AV-340
2008 Altima
SUBWOOFER
[BOSE AUDIO WITH NAVIGATION]
< COMPONENT DIAGNOSIS >
1. Connect AV control unit connector M47 and BOSE speaker
amp. connector B121.
2. Turn ignition switch to ACC.
3. Push POWER switch.
4. Check the signal between AV control unit harness connector
M47 terminals with CONSULT-III or oscilloscope.
Connector
Terminals
(+)
(-)
Condition
Reference
signal
D
M47
14
15
Receive audio
signal
E
SKIA0177E
G
ALNIA0172ZZ
AV
AV-341
2008 Altima
INFOID:0000000001830554
When the audio system is turned on, a voltage signal is supplied from the AV control unit to the BOSE speaker
amp. When this signal is received, the BOSE speaker amp. will turn on.
Diagnosis Procedure
INFOID:0000000001830555
AV-342
2008 Altima
STEERING SWITCH
[BOSE AUDIO WITH NAVIGATION]
STEERING SWITCH
Description
INFOID:0000000001830556
When one of the steering wheel audio control switches is pushed, the resistance in the steering switch circuit
changes depending on which button is pushed.
Diagnosis Procedure
INFOID:0000000001830557
1.CHECK HARNESS
1.
2.
3.
B
Terminal
Connector
Terminal
25
M46
Continuity
24
26
M30
33
27
Yes
31
ALLIA0255ZZ
4.
Continuity
Ground
No
Terminal
25
M46
26
27
M
A
Connector
B
Terminal
Connector
24
M30
31
Terminal
Continuity
AV
14
M88
33
15
Yes
17
O
ALNIA0931GB
AV-343
2008 Altima
STEERING SWITCH
[BOSE AUDIO WITH NAVIGATION]
Component Inspection
INFOID:0000000001830558
Measure the resistance between the steering switch connector terminals 14 to 17 and 15 to 17.
Standard
: 2003 2043
: 716 730
: 318 324
: 120 122
:0
JSNIA0112GB
: 716 730
: 318 324
: 120 122
:0
AV-344
2008 Altima
Description
INFOID:0000000001830559
Power is supplied to the microphone from the AV control unit. The microphone transmits voice signals to the
AV control unit.
Diagnosis Procedure
INFOID:0000000001830560
4.
G
ALLIA0256ZZ
1.
2.
3.
: Approx. 5V
M
ALLIA0257ZZ
AV
45 - 47
:
P
PKIB5037J
ALLIA0258ZZ
AV-345
2008 Altima
AV-346
2008 Altima
CAMERA IMAGE SIGNAL CIRCUIT (REAR VIEW CAMERA TO CAMERA CONTROL UNIT)(COUPE)
[BOSE AUDIO WITH NAVIGATION]
INFOID:0000000001830561
Rear view camera images are transmitted to the rear view camera control unit using the camera image signal
circuits.
Diagnosis Procedure
INFOID:0000000001830562
4.
ALLIA0259ZZ
M
SKIB2251J
ALLIA0260ZZ
AV
AV-347
2008 Altima
CAMERA IMAGE SIGNAL CIRCUIT (REAR VIEW CAMERA TO CAMERA CONTROL UNIT)(SEDAN)
[BOSE AUDIO WITH NAVIGATION]
INFOID:0000000003214809
Rear view camera images are transmitted to the rear view camera control unit using the camera image signal
circuits.
Diagnosis Procedure
INFOID:0000000003214810
4.
ALLIA0259ZZ
Connect rear view camera control unit connector and rear view camera connector.
Turn ignition switch ON.
Check signal between rear view camera control unit harness
connector B31 terminals 10 and 9.
10 - 9
SKIB2251J
ALLIA0260ZZ
AV-348
2008 Altima
A
INFOID:0000000001830563
When the selector lever is placed in the R position, the rear view camera control unit sends a camera ON signal to the rear view camera.
Diagnosis Procedure
INFOID:0000000001830564
4.
G
ALLIA0261ZZ
Connect rear view camera control unit connector and rear view camera connector.
Turn ignition switch ON.
Check voltage between rear view camera control unit harness
connector B31 terminal 8 and ground.
8 - Ground
: Approx. 6V
L
ALLIA0247ZZ
AV
AV-349
2008 Altima
INFOID:0000000003214811
When the selector lever is placed in the R position, the rear view camera control unit sends a camera ON signal to the rear view camera.
Diagnosis Procedure
INFOID:0000000003214812
4.
ALLIA0261ZZ
Connect rear view camera control unit connector and rear view camera connector.
Turn ignition switch ON.
Check voltage between rear view camera control unit harness
connector B31 terminal 8 and ground.
8 - Ground
: Approx. 6V
AV-350
2008 Altima
INFOID:0000000001830565
Rear view camera image signals are transmitted from the rear view camera control unit to the AV control unit
using the image signal circuits.
Diagnosis Procedure
INFOID:0000000001830566
4.
ALLIA0263ZZ
M
SKIB2251J
ALLIA0264ZZ
AV-351
2008 Altima
INFOID:0000000001830567
A reverse signal is supplied from the back-up lamp relay to the rear view camera control unit. When this signal
is received, the display shows a view to the rear of the vehicle.
Diagnosis Procedure
INFOID:0000000001830568
1.
2.
3.
4.
5.
Without CONSULT-III
Turn ignition switch OFF.
Disconnect rear view camera control unit connector.
Turn ignition switch ON.
Shift selector lever to R position.
Check voltage between rear view camera control unit harness
connector B31 terminal 4 and ground.
Battery voltage should exist.
AV-352
ALNIA0935GB
2008 Altima
ECU DIAGNOSIS
INFOID:0000000001830569
Display
Display Item
VHCL SPD SIG
PKB SIG
REV SIG
Remarks
ON
OFF
ON
OFF
ON
OFF
ILLUM SIG
IGN SIG
Vehicle status
ON
Ignition switch ON
OFF
ON
OFF
H
Changes in indication may be delayed. This is
normal.
TERMINAL LAYOUT
J
L
AWNIA0060ZZ
PHYSICAL VALUES
M
Terminal
(Wire color)
+
1
(G/R)
Ground
Description
Signal name
Condition
Input/
Output
Ignition
switch
Input
Ignition
switch
ON
Output
Ignition
switch
ON
Operation
Reference value
(Approx.)
Parking brake ON
0V
Battery voltage
AV
P
2
(G)
3
(R)
SKIB3609E
Shield
AV-353
2008 Altima
5
(GR/V)
6
(W/L)
Description
Signal name
Condition
Input/
Output
Ignition
switch
Operation
Output
Ignition
switch
ON
Reference value
(Approx.)
SKIB3609E
7
(V/Y)
Ground
Input
Ignition
switch
ACC
8 (V/W)
Ground
Input
Ignition
switch
ON
Battery voltage
SKIA6649J
0V
Battery voltage
9
(R/L)
Ground
Illumination signal
Input
OFF
10
(G)
Ground
Ignition signal
Input
Ignition
switch
ON
11
(B)
12
(W)
Output
Ignition
switch
ON
Battery voltage
SKIB3609E
13
14
(V)
15
(LG)
Shield
Output
Ignition
switch
ON
SKIB3609E
16
(B/P)
Ground
Amp. ON signal
Output
Ignition
switch
ON
17
(P/B)
Ground
Reverse signal
Input
Ignition
switch
ON
18
(R/Y)
Ground
Illumination control
Input
OFF
19
(B)
Ground
Ground
Ignition
switch
ON
R position
AV-354
Battery voltage
Battery voltage
Refer to INL-10, "System Description".
0V
2008 Altima
20
(Y/R)
Ground
24
(L)
25
(W/G)
26
(L/B)
27
(GR/L)
26
(L/B)
Ground
26
(L/B)
Description
Signal name
CANH
Condition
Reference value
(Approx.)
Input/
Output
Ignition
switch
Input
Ignition
switch
OFF
Battery voltage
Input/
Output
Input
Input
Ignition
switch
ON
Operation
0V
1V
2V
Keep pressing
3V
switch
4V
5V
Shield
0V
0V
1V
Keep pressing
switch.
2V
Keep pressing
switch.
3V
Ignition
switch
ON
Ignition
switch
ON
5V
31
(W/R)
Ground
Input
Ignition
switch
ON
SKIB3609E
32
Shield
AV
33
(W/L)
Ground
Input
Ignition
switch
ON
SKIB3609E
34
(W)
Ground
Input
Ignition
switch
ON
SKIB2251J
AV-355
2008 Altima
35
44
(P)
45
(B/R)
Ground
Description
Condition
Reference value
(Approx.)
Input/
Output
Ignition
switch
Operation
Shield
CANL
Input/
Output
Input
Ignition
switch
ON
Signal name
Microphone signal
PKIB5037J
Output
Ignition
switch
ON
5V
Microphone ground
Ignition
switch
ON
0V
Shield
0V
Input
Ignition
switch
ON
5V
Input
46
(R/L)
Ground
Microphone VCC
47
(R/B)
Ground
48
53
(V/G)
Ground
55
(R)
Ground
Ignition
switch
ON
SKIB2251J
62
(Y/L)
61
(W/L)
Input
Ignition
switch
ON
SKIB3609E
64
(Y/G)
63
(BR/L)
Input
Ignition
switch
ON
SKIB3609E
65
Shield
66
Shield
AV-356
2008 Altima
Description
Signal name
Condition
Input/
Output
Ignition
switch
Operation
Reference value
(Approx.)
69
(B)
Ground
Communication signal
(CDCONT)
Input
Ignition
switch
ON
SKIA9300J
70
(G)
Ground
Communication signal
(CONTCD)
Input
Ignition
switch
ON
F
SKIA9301J
G
72
(R)
Ground
Request signal
(CDCONT)
Output
Ignition
switch
ON
SKIA9299J
73
(B)
GPS signal
74
(B)
Shield
75
(B)
Ground
76
(B)
78
(B)
Input
Ignition
switch
ACC
5V
Output
Ignition
switch
ACC
Battery voltage
Input
Input
Ignition
switch
ACC
Ground
5V
AV
AV-357
2008 Altima
Wiring Diagram
INFOID:0000000001830570
AWNWA0022GB
AV-358
2008 Altima
AV
O
AWNWA0023GB
AV-359
2008 Altima
AWNWA0024GB
AV-360
2008 Altima
AV
O
AWNWA0025GB
AV-361
2008 Altima
AWNIA0344GB
AV-362
2008 Altima
AV
O
ALNIA0036GB
AV-363
2008 Altima
ALNIA0037GB
AV-364
2008 Altima
AV
O
AWNIA0345GB
AV-365
2008 Altima
AWNIA0346GB
AV-366
2008 Altima
AV
O
AWNIA0363GB
AV-367
2008 Altima
ALNIA0065GB
AV-368
2008 Altima
AV
O
AWNIA0347GB
AV-369
2008 Altima
ALNIA0067GB
AV-370
2008 Altima
AV
O
AWNIA0348GB
AV-371
2008 Altima
AWNIA0349GB
AV-372
2008 Altima
AV
O
AWNIA0350GB
AV-373
2008 Altima
AWNIA0351GB
AV-374
2008 Altima
AV
O
AWNIA0352GB
AV-375
2008 Altima
AWNIA0362GB
AV-376
2008 Altima
DTC Index
INFOID:0000000001830571
A
Reference
page
CONSULT-III display
Malfunction
When AV control unit is not transmitting or receiving CAN communication signals for 2 seconds
or more.
AV-283
CONTROL UNIT
(CAN)
[U1010]
When a malfunction is detected during initial diagnosis for CAN controller of each control unit.
AV-284
AV-285
GYRO NO CONN
[U1201]
AV-286
GPS COMM
[U1204]
AV-287
GPS ROM
[U1205]
AV-288
GPS RAM
[U1206]
AV-289
GPS RTC
[U1207]
AV-290
DVD-ROM COMM
[U1208]
AV-291
DVD-ROM READ
[U1209]
AV-292
DVD-ROM DISC
[U120A]
AV-293
DVD-ROM MECHA
DETECT
[U120C]
AV-294
DVD-ROM MECHA
[U120D]
AV-295
DVD-ROM SEEK
[U1210]
AV-296
DVD-ROM DATA
FORWARD
[U1212]
AV-297
DVD-ROM DATA
[U1213]
AV-298
DVD-ROM TIMEOUT
[U1214]
AV-299
DVD-ROM LOAD
[U1215]
AV-300
CAN CONT
[U1216]
AV-301
BLUETOOTH CONN
[U1217]
AV-302
XM SERIAL COMM
[U1220]
An internal malfunction is detected in AV control unit (satellite radio tuner communication malfunction).
AV-303
AV
AV-377
2008 Altima
Malfunction
Reference
page
GPS ANTENNA
CONN
[U1244]
AV-304
N-BUS CD CHG
CONN
[U124C]
AV-305
AV-378
2008 Altima
Reference Value
INFOID:0000000003214813
Display
Display Item
VHCL SPD SIG
PKB SIG
REV SIG
Remarks
ON
OFF
ON
OFF
ON
OFF
ON
Ignition switch ON
OFF
ON
OFF
ILLUM SIG
IGN SIG
Vehicle status
G
Changes in indication may be delayed. This is
normal.
TERMINAL LAYOUT
I
K
AWNIA0060ZZ
PHYSICAL VALUES
Terminal
(Wire color)
+
1 (G/R)
Ground
Description
Signal name
Condition
Input/
Output
Ignition
switch
Input
Ignition
switch
ON
Operation
Reference value
(Approx.)
AV
Parking brake ON
0V
Battery voltage
2 (G)
3 (R)
Output
Ignition
switch
ON
SKIB3609E
Shield
AV-379
2008 Altima
5 (GR/V)
6 (W/L)
Description
Signal name
Condition
Input/
Output
Ignition
switch
Operation
Output
Ignition
switch
ON
Reference value
(Approx.)
SKIB3609E
7 (V/Y)
Ground
Input
Ignition
switch
ACC
8 (V/W)
Ground
Input
Ignition
switch
ON
Battery voltage
SKIA6649J
0V
Battery voltage
9 (R/L)
Ground
Illumination signal
Input
OFF
10 (G)
Ground
Ignition signal
Input
Ignition
switch
ON
11 (B)
12 (W)
Output
Ignition
switch
ON
Battery voltage
SKIB3609E
13
14 (V)
15 (LG)
Shield
Output
Ignition
switch
ON
SKIB3609E
16 (B/P)
Ground
Amp. ON signal
Output
Ignition
switch
ON
17 (P/B)
Ground
Reverse signal
Input
Ignition
switch
ON
18 (R/Y)
Ground
Illumination control
Input
OFF
19 (B)
Ground
Ground
Ignition
switch
ON
R position
AV-380
Battery voltage
Battery voltage
Refer to INL-10, "System Description".
0V
2008 Altima
20 (Y/R)
Ground
24 (L)
25 (W/G)
26 (L/B)
27 (GR/L)
26 (L/B)
Ground
26 (L/B)
Description
Signal name
CANH
Condition
Reference value
(Approx.)
Input/
Output
Ignition
switch
Input
Ignition
switch
OFF
Battery voltage
Input/
Output
Input
Input
Ignition
switch
ON
Operation
0V
1V
2V
Keep pressing
3V
switch
4V
5V
Shield
0V
0V
1V
Keep pressing
switch.
2V
Keep pressing
switch.
3V
Ignition
switch
ON
Ignition
switch
ON
5V
31 (W/R)
Ground
Input
Ignition
switch
ON
SKIB3609E
32 (W)
33 (W/L)
Ground
Ground
AUX ground
Input
Ignition
switch
ON
Ignition
switch
ON
0V
AV
P
SKIB3609E
AV-381
2008 Altima
34 (W)
Ground
Description
Signal name
Condition
Input/
Output
Ignition
switch
Input
Ignition
switch
ON
Operation
Reference value
(Approx.)
SKIB2251J
35
Shield
44 (P)
CANL
Input/
Output
45 (B/R)
Ground
Input
Ignition
switch
ON
Microphone signal
PKIB5037J
Output
Ignition
switch
ON
5V
Microphone ground
Ignition
switch
ON
0V
Shield
0V
Input
Ignition
switch
ON
5V
Input
46 (R/L)
Ground
Microphone VCC
47 (R/B)
Ground
48
53 (V/G)
55 (R)
Ground
Ground
Ignition
switch
ON
SKIB2251J
62 (Y/L)
61 (W/L)
Input
Ignition
switch
ON
SKIB3609E
64 (Y/G)
63 (BR/L)
Input
Ignition
switch
ON
SKIB3609E
AV-382
2008 Altima
65
66
Description
Condition
Reference value
(Approx.)
Input/
Output
Ignition
switch
Operation
Shield
Shield
Signal name
69 (B)
Ground
Communication signal
(CDCONT)
Input
Ignition
switch
ON
SKIA9300J
70 (G)
Ground
Communication signal
(CONTCD)
Input
Ignition
switch
ON
G
SKIA9301J
H
72 (R)
Ground
Request signal
(CDCONT)
Output
Ignition
switch
ON
I
SKIA9299J
Ignition
switch
ACC
5V
Output
Ignition
switch
ACC
Battery voltage
Main antenna
Input
Input
Ignition
switch
ACC
GPS signal
74 (B)
Shield
75 (B)
Ground
76 (B)
78 (B)
Ground
Input
73 (B)
L
Not connected to satellite
antenna connector
5V
AV
AV-383
2008 Altima
Wiring Diagram
INFOID:0000000003214814
AWNWA0122GB
AV-384
2008 Altima
AV
O
AWNWA0123GB
AV-385
2008 Altima
AWNWA0124GB
AV-386
2008 Altima
AV
O
ALNWA0027GB
AV-387
2008 Altima
AWNIA0609GB
AV-388
2008 Altima
AV
O
ALNIA0036GB
AV-389
2008 Altima
ALNIA0037GB
AV-390
2008 Altima
AV
O
AWNIA0610GB
AV-391
2008 Altima
ALNIA0039GB
AV-392
2008 Altima
AV
O
AWNIA0611GB
AV-393
2008 Altima
AWNIA0612GB
AV-394
2008 Altima
AV
O
AWNIA0613GB
AV-395
2008 Altima
ALNIA0067GB
AV-396
2008 Altima
AV
O
AWNIA0614GB
AV-397
2008 Altima
ALNIA0069GB
AV-398
2008 Altima
AV
O
ALNIA0070GB
AV-399
2008 Altima
ALNIA0071GB
AV-400
2008 Altima
AV
O
AWNIA0615GB
AV-401
2008 Altima
DTC Index
INFOID:0000000003214815
CONSULT-III display
Malfunction
Reference
page
When AV control unit is not transmitting or receiving CAN communication signals for 2 seconds
or more.
AV-283
CONTROL UNIT
(CAN)
[U1010]
When a malfunction is detected during initial diagnosis for CAN controller of each control unit.
AV-284
AV-285
GYRO NO CONN
[U1201]
AV-286
GPS COMM
[U1204]
AV-287
GPS ROM
[U1205]
AV-288
GPS RAM
[U1206]
AV-289
GPS RTC
[U1207]
AV-290
DVD-ROM COMM
[U1208]
AV-291
DVD-ROM READ
[U1209]
AV-292
DVD-ROM DISC
[U120A]
AV-293
DVD-ROM MECHA
DETECT
[U120C]
AV-294
DVD-ROM MECHA
[U120D]
AV-295
DVD-ROM SEEK
[U1210]
AV-296
DVD-ROM DATA
FORWARD
[U1212]
AV-297
DVD-ROM DATA
[U1213]
AV-298
DVD-ROM TIMEOUT
[U1214]
AV-299
DVD-ROM LOAD
[U1215]
AV-300
CAN CONT
[U1216]
AV-301
BLUETOOTH CONN
[U1217]
AV-302
XM SERIAL COMM
[U1220]
An internal malfunction is detected in AV control unit (satellite radio tuner communication malfunction).
AV-303
AV-402
2008 Altima
Malfunction
GPS ANTENNA
CONN
[U1244]
N-BUS CD CHG
CONN
[U124C]
Reference
page
AV-304
B
AV-305
AV
AV-403
2008 Altima
INFOID:0000000001830572
TERMINAL LAYOUT
AWNIA0047ZZ
PHYSICAL VALUES
Terminal
(Wire color)
Description
41
(LG)
42
(B/Y)
Signal name
Condition
Input/Output
Output
Reference value
(Approx.)
Ignition
switch ON
SKIB3609E
44
(L/O)
43
(GR/L)
Output
Ignition
switch ON
SKIB3609E
45
(BR/W)
46
(BR)
Output
Ignition
switch ON
SKIB3609E
47
(B/L)
Ground
GND
Ignition
switch ON
0V
50
(BR)
Ground
Input
Ignition
switch OFF
Battery voltage
51
(B/R)
Ground
Input
Ignition
switch OFF
Battery voltage
52
(B)
Ground
GND
Ignition
switch ON
0V
AV-404
2008 Altima
Description
Signal name
Condition
Input/Output
Reference value
(Approx.)
B
53
(W/B)
48
(G/B)
Output
Ignition
switch ON
SKIB3609E
54
(L)
49
(B/W)
Output
Ignition
switch ON
F
SKIB3609E
G
58
(W)
59
(B)
Output
Ignition
switch ON
H
SKIB3609E
60
(B/G)
Ground
Amp. ON signal
Input
Ignition
switch ACC
Battery voltage
J
64
(BR)
63
(Y)
Input
Ignition
switch ON
K
SKIB3609E
66
(LG)
65
(V)
Input
Ignition
switch ON
SKIB3609E
AV
O
68
(R/G)
55
(BR/B)
Output
Ignition
switch ON
P
SKIB3609E
AV-405
2008 Altima
Description
69
(B/P)
70
(O/B)
Signal name
Condition
Input/Output
Output
Reference value
(Approx.)
Ignition
switch ON
SKIB3609E
71
(G/W)
72
(BR)
Output
Ignition
switch ON
SKIB3609E
73
(W/L)
74
(GR/V)
Input
Ignition
switch ON
SKIB3609E
75
(W/R)
76
(B/R)
Input
Ignition
switch ON
SKIB3609E
AV-406
2008 Altima
Reference Value
INFOID:0000000001830573
TERMINAL LAYOUT
WKIA5224E
PHYSICAL VALUES
Description
Terminal
(Wire color)
Signal name
Condition
Input/
Output
Ignition
switch
Operation
Reference value
(Approx.)
1
(Y)
Ground
Battery power
Input
OFF
Battery voltage
2
(V)
Ground
ACC power
Input
ACC
Battery voltage
3
(B)
Ground
Ground
ON
0V
4
(P/B)
Ground
Input
ON
Battery voltage
0V
5
(V/G)
Ground
AV Control
Output
ON
0V
6
(O)
Ground
DDL
Output
8
(GR)
Ground
Output
ON
9
(L)
Ground
Input
ON
6V
0V
10
(P)
Ground
Input
ON
AV
SKIA4894E
AV-407
2008 Altima
11
(R)
Ground
Description
Condition
Signal name
Input/
Output
Ignition
switch
Output
ON
Operation
Reference value
(Approx.)
SKIA4896E
12
(W)
Ground
Output
ON
SKIA4896E
AV-408
2008 Altima
CD CHANGER
[BOSE AUDIO WITH NAVIGATION]
CD CHANGER
Reference Value
INFOID:0000000001830574
TERMINAL LAYOUT
AWNIA0061ZZ
PHYSICAL VALUES
F
Terminal
(Wire color)
+
2
(Y/L)
1
(W/L)
Description
Signal name
Condition
Input/
Output
Ignition
switch
Output
Ignition
switch
ON
Operation
Reference value
(Approx.)
H
When CD change
mode is selected
I
SKIB3609E
J
4
(Y/G)
3
(BR/L)
Ground
Output
Ignition
switch
ON
Input
CD player ON
When CD change
mode is selected
SKIB3609E
Shield
Data ground
M
8
(R)
Ground
Request signal
(CDCONT)
Output
Ignition
switch
ON
When CD change
mode is selected
AV
SKIA9299J
9
(B)
Ground
Communication signal
(CONTCD)
Input
Ignition
switch
ON
When CD change
mode is selected
SKIA9300J
AV-409
2008 Altima
CD CHANGER
[BOSE AUDIO WITH NAVIGATION]
10
(G)
Ground
Description
Signal name
Communication signal
(CDCONT)
Condition
Input/
Output
Ignition
switch
Output
Ignition
switch
ON
Operation
Reference value
(Approx.)
When CD change
mode is selected
SKIA9301J
12
(Y/R)
Ground
Input
Ignition
switch
OFF
13
(R/Y)
Ground
Illumination (-)
Input
OFF
14
(R/L)
Ground
16
(V/Y)
Ground
Illumination (+)
Input
Input
OFF
Ignition
switch
ACC
AV-410
Battery voltage
Refer to INL-10, "System Description".
Lighting switch is
OFF.
0V
Lighting switch is
ON.
Battery voltage
Battery voltage
2008 Altima
MULTI AV SYSTEM
[BOSE AUDIO WITH NAVIGATION]
SYMPTOM DIAGNOSIS
MULTI AV SYSTEM
Symptom Table
INFOID:0000000001830575
NAVIGATION SYSTEM
C
Symptom
Possible cause
Reference page
Inoperative
AV-307
AV-301
AV-343
AV-301
Microphone
Steering wheel audio control switch
AV control unit
AV-345
AV-343
AV-301
Symptom
Possible cause
Reference page
Inoperative
AV-307
AV-301
AV-343
AV-301
Microphone
Steering wheel audio control switch
AV control unit
AV-345
AV-343
AV-301
Possible cause
Inoperative
Reference page
AV-307
AV-352
AV-349
AV-347
AV-351
AV-347
AUDIO SYSTEM
M
Symptom
Possible cause
Reference page
Inoperative
AV-307
AV-301
AV-343
AV-301
AV-307
AV-342
AV-309
AV-342
AV-301
Door speaker
Front tweeter
Center speaker
Rear tweeter
Subwoofer
AV-319
AV-325
AV-331
AV-333
AV-339
AV-411
2008 Altima
AV
INFOID:0000000001830576
AUDIO SYSTEM
The majority of the audio troubles are the result of outside causes (bad CD, electromagnetic interference,
etc.).
Noise
The following noise results from variations in field strength, such as fading noise and multi-path noise, or
external noise from trains and other sources. It is not a malfunction.
Fading noise: This noise occurs because of variations in the field strength in a narrow range due to mountains or buildings blocking the signal.
Multi-path noise: This noise results from the waves sent directly from the broadcast station arriving at the
antenna at a different time from the waves which reflect off mountains or buildings.
The vehicle itself can be a source of noise if noise prevention parts or electrical equipment is malfunctioning.
Check if noise is caused and/or changed by engine speed, ignition switch turned to each position, and operation of each piece of electrical equipment, and determine the cause.
NOTE:
The source of the noise can be found easily by listening to the noise while removing the fuses of electrical
components, one by one.
Type of Noise and Possible Cause
Occurrence condition
Occurs only when engine is ON.
Possible cause
The occurrence of the noise is linked with the operation of the fuel pump.
Noise only occurs when various
electrical components are operating.
Ignition components
Fuel pump condenser
A cracking or snapping sound occurs while the vehicle is being driven, especially when
it is vibrating excessively.
NAVIGATION SYSTEM
Basic Operation
Symptom
Cause
Remedy
No image is shown.
Vehicle Mark
AV-412
2008 Altima
Cause
Remedy
Some thinning of the character data is done to prevent the display becoming to complex. In some
cases and in some locations, the display contents
may differ.
The same place name, street name, etc. may not
be displayed every time on account of the data
processing.
Drive the vehicle for a while in the GPS satellite signal receiving condition.
Map screen will not scroll in accordance with the vehicle travel.
Cause
Remedy
AV-413
AV
2008 Altima
Cause
Remedy
Performed search with every conditions considered. However, the result is the same as that of the
previous search.
Stop the vehicle at a safe place and then operate the system.
Voice Guide
Symptom
Voice guide will not operate.
Cause
Remedy
Voice guide does not match the ac- Voice guide may vary with the direction to which
tual road pattern.
the vehicle is turn and the connection of the road to
other roads.
Route Search
Symptom
No route is shown.
Cause
Remedy
Find wider road (orange road or wider) nearby and reset the destination and passing
points onto it. Take care of the traveling direction when there are separate up and down
roads.
A recommended route is controlled by each section. When the vehicle has passed the passing
point 1, then the map data from the starting point
up to the passing point 1 will be deleted. (The data
may remain undeleted in some area.)
AV-414
2008 Altima
Cause
Remedy
Slightly move the starting point or the destination, or set the passing point on the route of
your choice.
NOTE:
Except for the ordinance-designated cities. (Malfunctioning areas may be changed in the updated map disc.)
AV
O
SEL698V
AV-415
2008 Altima
Driving condition
Yintersections
At a Y intersection or similar gradual division of roads, an error in the direction of
travel deduced by the sensor may result in
the current-location mark appearing on the
wrong road.
ELK0192D
Spiral roads
When driving on a large, continuous spiral
road (such as loop bridge), turning angle
error is accumulated and the vehicle mark
may deviate from the correct location.
ELK0193D
Straight roads
When driving on a long, straight road and
slow curve without stopping, map-matching
does not work effectively enough and distance errors may accumulate. As a result,
the vehicle mark may deviate from the correct location when the vehicle is turned at a
corner.
Road configuration
ELK0194D
Zigzag roads
When driving on a zigzag road, the map
may be matched to other roads in the similar direction nearby at every turn, and the
vehicle mark may deviate from the correct
location.
ELK0195D
Parallel roads
When two roads are running in parallel
(such as highway and sideway), the map
may be matched to the other road by mistake and the vehicle mark may deviate from
the correct location.
ELK0197D
AV-416
2008 Altima
In a parking lot
SEL709V
Driving condition
When driving in a parking lot, or other location where there are no roads on the map,
matching may place the vehicle mark on a
nearby road. When the vehicle returns to
the road, the vehicle mark may have deviated from the correct location.
When driving in circle or turning the steering wheel repeatedly, direction errors accumulate, and the vehicle mark may deviate
from the correct location.
Turntable
When the ignition switch is OFF, the navigation system cannot get the signal from
the gyroscope (angular speed sensor).
Therefore, the displayed direction may be
wrong and the correct road may not be easily returned to after rotating the vehicle on a
turntable with the ignition OFF.
Place
SEL710V
Slippery roads
F
On snow, wet roads, gravel, or other roads
where tires may slip easily, accumulated
mileage errors may cause the vehicle mark
to deviate from the correct road.
Slopes
SEL699V
Map data
ELK0201D
Vehicle
AV
AV-417
2008 Altima
Driving condition
When driving long distances without stopping, direction errors may accumulate, and
the current-location mark may deviate from
the correct road.
SEL701V
SEL702V
AV-418
2008 Altima
When Driving on Same Road, Sometimes Vehicle Mark is in Right Place and Sometimes it is in Wrong Place
The conditions of the GPS antenna (GPS data) and gyroscope (angular speed sensor) change gradually.
Depending on the road traveled and the operation of the steering wheel, the location detection results will be
different. Therefore, even on a road on which the location has never been wrong, conditions may cause the
vehicle mark to deviate.
AV
AV-419
2008 Altima
PRECAUTIONS
[BOSE AUDIO WITH NAVIGATION]
PRECAUTION
PRECAUTIONS
Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
INFOID:0000000001346152
The Supplemental Restraint System such as AIR BAG and SEAT BELT PRE-TENSIONER, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SR and SB section of this Service Manual.
WARNING:
To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness connectors.
INFOID:0000000001346153
AV COMMUNICATION SYSTEM
Do not apply voltage of 7.0 V or higher to the measurement terminals.
Use the tester with its open terminal voltage being 7.0 V or less.
Be sure to turn ignition switch OFF and disconnect the battery cable from the negative terminal before
checking the circuit.
INFOID:0000000001346154
AV COMMUNICATION SYSTEM
Solder the repaired parts, and wrap with tape. [Frays of twisted line
must be within 110 mm (4.33 in).]
PKIA0306E
Do not perform bypass wire connections for the repair parts. (The
spliced wire will become separated and the characteristics of
twisted line will be lost.)
PKIA0307E
AV-420
2008 Altima
PREPARATION
[BOSE AUDIO WITH NAVIGATION]
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000001346155
Tool name
Description
Power tool
E
PBIC0191E
AV
AV-421
2008 Altima
AUDIO UNIT
[BOSE AUDIO WITH NAVIGATION]
ON-VEHICLE REPAIR
AUDIO UNIT
Removal and Installation
INFOID:0000000001346156
REMOVAL
1.
2.
3.
ALNIA0059ZZ
4.
ALNIA0060ZZ
5.
Pull out the navigation audio unit assembly, disconnect the navigation audio unit assembly connectors.
INSTALLATION
Installation is in the reverse order of removal.
AV-422
2008 Altima
INFOID:0000000003185339
REMOVAL
1.
2.
3.
4.
F
ALNIA0918ZZ
INSTALLATION
Installation is in the reverse order of removal.
INFOID:0000000003185340
REMOVAL
1.
2.
3.
AV
P
ALNIA0046ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-423
2008 Altima
CD CHANGER
[BOSE AUDIO WITH NAVIGATION]
CD CHANGER
Removal and Installation
INFOID:0000000003185341
REMOVAL
1.
2.
3.
4.
Remove the Cluster D lower finisher. Refer to IP-11, "Removal and Installation".
Put selector lever in the drive "D" position (CVT models only).
Put shift lever in neutral (M/T models only).
Using a suitable tool remove the CD changer finisher (1), then
disconnect the power socket, AUX jack connectors and remove
the CD changer finisher (1).
ALNIA0047ZZ
5.
Remove the CD changer screws (A), pull out the unit, then disconnect the CD changer connector and remove the CD changer
(1).
ALNIA0048ZZ
6.
ALNIA0049ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-424
2008 Altima
FRONT TWEETER
[BOSE AUDIO WITH NAVIGATION]
FRONT TWEETER
INFOID:0000000003185348
REMOVAL
1.
2.
3.
Remove the front pillar finisher. Refer to INT-19, "Removal and Installation".
Remove tweeter speaker grille. Refer to IP-11, "Removal and Installation".
Remove the tweeter speaker screws (A), disconnect the tweeter
speaker connector and remove the tweeter speaker (1).
F
ALNIA0050ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV
AV-425
2008 Altima
CENTER SPEAKER
[BOSE AUDIO WITH NAVIGATION]
CENTER SPEAKER
Removal and Installation
INFOID:0000000003185349
REMOVAL
1.
2.
Remove the center speaker grille. Refer to IP-11, "Removal and Installation".
Remove the center speaker screws (A), then pull out the center
speaker (1), then disconnect the center speaker connector and
remove the center speaker (1).
ALNIA0053ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-426
2008 Altima
INFOID:0000000003185350
REMOVAL
1.
2.
Remove the front door finisher. Refer to INT-11, "Removal and Installation".
Remove the front door speaker screws (A), then disconnect the
front door speaker connector and remove the front door speaker
(1).
ALNIA0040ZZ
INSTALLATION
Installation is in the reverse order of removal.
G
AV
AV-427
2008 Altima
INFOID:0000000003185351
REMOVAL
1.
2.
Remove the rear door finisher. Refer to INT-32, "Removal and Installation".
Remove the rear door speaker screws (A), then disconnect the
rear door speaker connector and remove the rear door speaker
(1).
ALNIA0041ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-428
2008 Altima
REAR TWEETER
[BOSE AUDIO WITH NAVIGATION]
REAR TWEETER
INFOID:0000000003185352
REMOVAL
1.
2.
Remove the rear parcel shelf finisher. Refer to INT-16, "Removal and Installation".
Remove the rear tweeter speaker screws (A) and remove the
rear tweeter speaker (1).
ALNIA0919ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV
AV-429
2008 Altima
REAR SPEAKER
[BOSE AUDIO WITH NAVIGATION]
REAR SPEAKER
Removal and Installation - Coupe
INFOID:0000000003185353
REMOVAL
1.
2.
Remove the trunk front finisher. Refer to INT-22, "Removal and Installation".
Remove the rear speaker screws (A), then disconnect the rear
speaker connector (B) and remove the rear speaker (1).
ALNIA0916ZZ
INSTALLATION
Installation is in the reverse order of removal.
INFOID:0000000003185354
REMOVAL
1.
2.
Remove the rear parcel shelf finisher. Refer to INT-44, "Removal and Installation".
Remove the rear speaker screws (A), then disconnect the rear
speaker and remove the rear speaker (1).
ALNIA0042ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-430
2008 Altima
INFOID:0000000003185355
B
INFOID:0000000003185356
AV
AV-431
2008 Altima
INFOID:0000000003185357
REMOVAL
1.
2.
Lower the headliner at the rear. Refer to INT-19, "Removal and Installation".
Remove the satellite radio antenna nut (A), then disconnect the
satellite radio antenna connector (B) and remove the satellite
radio antenna (1).
ALNIA0056ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-432
2008 Altima
GPS ANTENNA
[BOSE AUDIO WITH NAVIGATION]
GPS ANTENNA
INFOID:0000000001346167
REMOVAL
1.
2.
3.
F
ALNIA0061ZZ
INSTALLATION
AV
AV-433
2008 Altima
STEERING SWITCH
[BOSE AUDIO WITH NAVIGATION]
STEERING SWITCH
Removal and Installation
INFOID:0000000003185358
REMOVAL
1.
2.
Remove the driver airbag module. Refer to SR-4, "Removal and Installation".
Remove the steering wheel switch assembly screws (A), then
remove the steering wheel switches (1).
ALNIA0045ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-434
2008 Altima
Location of Antenna
INFOID:0000000003214638
M
AWNIA0748ZZ
1.
2.
4.
Satellite antenna
5.
6.
7.
Window Antenna
8.
Antenna amp.
9.
3.
Audio unit
INFOID:0000000003214640
AV
ELEMENT CHECK
P
AV-435
2008 Altima
SEL250I
SEL122R
2.
SEL252I
3.
SEL253I
AV-436
2008 Altima
REPAIRING PROCEDURE
1.
2.
3.
Wipe broken heat wire and its surrounding area clean with a
cloth dampened in alcohol.
Apply a small amount of conductive silver composition to tip of
drawing pen.
Shake silver composition container before use.
Place ruler on glass along broken line. Deposit conductive silver
composition on break with drawing pen. Slightly overlap existing
heat wire on both sides [preferably 5 mm (0.20 in)] of the break.
F
PIIA0215E
4.
After repair has been completed, check repaired wire for continuity. This check should be conducted 10 minutes after silver
composition is deposited.
Do not touch repaired area while test is being conducted.
SEL012D
5.
SEL013D
AV
AV-437
2008 Altima
INFOID:0000000003222317
ALNIA0044ZZ
1.
2.
3.
Audio unit
4.
Satellite antenna
5.
6.
7.
Window Antenna
8.
Antenna amp.
9.
INFOID:0000000003222318
ELEMENT CHECK
1.
SEL250I
AV-438
2008 Altima
C
SEL122R
2.
SEL252I
3.
AV
SEL253I
REPAIR EQUIPMENT
REPAIRING PROCEDURE
AV-439
2008 Altima
PIIA0215E
4.
After repair has been completed, check repaired wire for continuity. This check should be conducted 10 minutes after silver
composition is deposited.
Do not touch repaired area while test is being conducted.
SEL012D
5.
SEL013D
AV-440
2008 Altima
ANTENNA AMP.
[BOSE AUDIO WITH NAVIGATION]
ANTENNA AMP.
INFOID:0000000003185544
REMOVAL
1.
2.
Remove the rear pillar finisher RH. Refer to INT-19, "Exploded View".
Detach the antenna amp harness clip (B), disconnect the
antenna amp connectors (A), remove the antenna amp screw
(C) and remove the antenna amp (1).
ALNIA0917ZZ
INSTALLATION
Installation is in the reverse order of removal.
G
INFOID:0000000003185545
REMOVAL
1.
2.
3.
Remove the rear pillar finisher RH. Refer to INT-40, "Exploded View".
Partially remove the side curtain air bag module RH to gain access to the antenna amp. Refer to SR-10,
"Removal and Installation".
Detach the antenna amp harness clip (A), disconnect the
antenna amp connectors (B), remove the antenna amp screw
(C) and remove the antenna amp (1).
L
ALNIA0043ZZ
INSTALLATION
AV-441
2008 Altima
MICROPHONE
[BOSE AUDIO WITH NAVIGATION]
MICROPHONE
Removal and Installation - Coupe
INFOID:0000000003185546
ALNIA0928ZZ
3.
Remove the map lamp covers (1), then remove the map lamp
assembly cover (2).
NOTE:
This step and the following step are (non sunroof only).
ALNIA0929ZZ
4.
ALNIA0930ZZ
INSTALLATION
Installation is in the reverse order of removal.
INFOID:0000000003185547
REMOVAL
1.
2.
AV-442
2008 Altima
MICROPHONE
[BOSE AUDIO WITH NAVIGATION]
C
ALNIA0057ZZ
INSTALLATION
Installation is in the reverse order of removal.
E
AV
AV-443
2008 Altima
TEL ANTENNA
[BOSE AUDIO WITH NAVIGATION]
TEL ANTENNA
Removal and Installation - Coupe
INFOID:0000000003185548
REMOVAL
1.
2.
3.
4.
5.
Remove the trunk front finisher, trunk floor carpet and spare tire cover. Refer to INT-21, "Exploded View".
Remove the LH trunk floor spacer.
Remove the rear pillar LH. Refer to INT-19, "Exploded View".
Remove the rear parcel shelf. Refer to INT-16, "Removal and Installation".
Remove the Bluetooth antenna screw (A), then detach the Bluetooth antenna harness clips, disconnect the Bluetooth antenna
connector and remove the Bluetooth antenna (1).
ALNIA0921ZZ
INSTALLATION
Installation is in the reverse order of removal.
INFOID:0000000003185549
REMOVAL
1.
2.
Remove the rear parcel shelf. Refer to INT-36, "Removal and Installation".
Remove the Bluetooth antenna screw (A), fold down the rear
seat, disconnect the Bluetooth antenna connector and remove
the Bluetooth antenna (1).
ALNIA0058ZZ
INSTALLATION
Installation is in the reverse order of removal.
AV-444
2008 Altima
INFOID:0000000003185550
B
INFOID:0000000003185551
AV
AV-445
2008 Altima
INFOID:0000000003185552
REMOVAL
1.
2.
3.
Remove the license plate finisher. Refer to EXT-23, "Removal and Installation".
Remove trunk lid finisher. Refer to INT-21, "Exploded View".
Remove the rear view monitor by performing the following:
For coupe models, release the clip (A), then pull out the rear
view monitor connector, disconnect the rear view monitor connector, press the rear view monitor tab (B) and remove the
rear view monitor (1).
ALNIA0926ZZ
ALNIA0062ZZ
INSTALLATION
Installation is in the reverse order of removal.
Adjustment
INFOID:0000000003185554
AV-446
2008 Altima
INFOID:0000000003185555
REMOVAL
1.
2.
3.
4.
5.
ALNIA0063ZZ
INSTALLATION
INFOID:0000000003185556
REMOVAL
1.
2.
Remove the trunk side finisher. Refer to INT-44, "Removal and Installation".
Disconnect the rear view monitor control unit connector (A), then
remove the rear view monitor screws (B) and remove the rear
view monitor control unit (1).
M
ALNIA0063ZZ
AV
INSTALLATION
Installation is in the reverse order of removal.
O
AV-447
2008 Altima