Sei sulla pagina 1di 24

CATNo.

813-02E-F

Process & Instrumentation Valve


Equipment for Oil & Gas

ISO 9001 certified

Osaka Plant

OHSAS18001 certified

Tsukuba Research Plant

ISO 14001 certified

Tsukuba Research Plant

ISO9001/14001 certified

Vietnam Plant

Introduction

Process & Instrumentation Valve Equipment for Oil & Gas.

s flow control technologies


are state of the art
everywhere: earth, ocean and sky.
has become the top manufacturing corporation for not only
specific-purpose valves but also super high precision flow control systems.
Our cutting edge technology is used in every area that demands the highest technology.

Semiconductor

Solar and Fuel Cells

Aerospace

Marine Vessels

Iron and Steel

Nano Devices

Medical, Pharmaceutical and Food

Ocean Development

Petrochemicals

Cryogenic Equipment

Application & Achievement

Process & Instrumentation Valve Equipment for Oil & Gas.

Holding a share of more than 80% of instrumentation valves for Oil & Gas plant in Japan,
contributes to safety, security and reliability of the nuclear power stations also.

Oil & Gas Production

Petrochemicals & Chemicals

Petroleum Refining

GTL / DME

LNG

Oil Platform

Products

Process & Instrumentation Valve Equipment for Oil & Gas.

Manual Valves
Severe Service
Valves

Needle Valves
Valves with precise
and stable flow control,
and shutoff ability

pressure, high
(high
temperature, cryogenic (
Valves for high
temperature, high
pressure, and
cryogenic evironments

Ball Valves

Bellows Valves

Ball valves that cover a


wide range of
purposes from general
to special

Metal bellows provides


reliable seal to
atmosphere

Products

Process & Instrumentation Valve Equipment for Oil & Gas.

Manual Valves
Manifold Valves

Plug Valves

Gauge Valves

Toggle Valves

High performance
valves that enable to
switch flow paths
easily and accurately

Integrated valves
compliant with all
pressure
instrumentation devices
and wide pressure range

Gauge valves
correspond to multiple
flows and connections

Compact Design
Open and Close
quickly

Products

Process & Instrumentation Valve Equipment for Oil & Gas.

Automatically Operated Valves


Pneumatic
Control Valves

Electric
Control Valves

Mini-Control Valve with


diaphragm actuator
Product lineup covers
a wide range of
environments from
high pressure to
vacuum and from high
temperature to
extremely low
temperature

Electric control valves


driven by solenoid or
stepping motors
High response
performance

Ball Valves

Fine Ceramic
Ball Valves

Compact and light


weight automatic ball
valves with high
durability

Ceramic materials
offer greatest hardness
and excellent abrasion
and corrosion
resistance.
CosmixTM Ball Valves
feature fine ceramics
in all wetted parts.

Products

Process & Instrumentation Valve Equipment for Oil & Gas.

Other Valves
Compact, lightweight safety devices for fluids

Check Valves

Relief Valves

Fixed Cracking
Pressure From 1/3 to
25 psig (0.03 to 1.8
bar)
Standard: 1 psig

Service up to 6000
psig (413 bar)

Vent Plugs

Filters

Products

Process & Instrumentation Valve Equipment for Oil & Gas.

Fittings

Pipe Equipments

TUBE
Fittings

Flexible Tubes

Fittings for tubes that


have connections from
small to large nominal
diameters,
from extremely low to
high temperatures, and
from to vacuum to high
pressure

Heat & Tube


Tracing Systems
Process tube, tracer
tube, electric motor,
lagging material, and
PVC jacket are integrated
in the product.
The product can shorten
the period of construction
and reduce the cost of
construction.

Pipe Fittings
Fittings compliant with
all configurations and
connections

Pipe Equipments
Flanges & Gaskets

Pipes & Tubes

Products

Process & Instrumentation Valve Equipment for Oil & Gas.

Equipment for Pipe Work and Inspection


These products offer high performance in pipe construction and a wide variety of inspections.

Provider
Power Unit
Compressor / Pump

Fine Bubble

Custom
Order
Processing
Parts

Leak Detection Fluid

Products

Process & Instrumentation Valve Equipment for Oil & Gas.

Equipment for Analysis and Sampling Pipes


These products offer the highest standard of oil free treatments in the world.

IGS

Mass Flow
Controllers

(Integrated Gas System)

Thermal Type

FCS

(Flow Control System)

Pressure Type
Fine series

(Clean Valves and Fittings)

Weir
Diaphragm
Valves
Weirless
Diaphragm
Valves

Products

Process & Instrumentation Valve Equipment for Oil & Gas.

Others
These products meet various demands in relation to flow control systems.

Mini Channel
Valves

Static Fluid
Mixer

Fail-Proof
Devices
(Safety Handles)

10

Delivery Records

Process & Instrumentation Valve Equipment for Oil & Gas.

Process & Instrumentation Valve Equipment for Oil & Gas and General Industries

11

Network

Process & Instrumentation Valve Equipment for Oil & Gas.

We are increasing our market share worldwide.


The
global network capitalizes upon global trends.
has a 40% share of the world market in super ultra-precise flow-control equipment.
We established our global network with world-renowned cutting-edge technology.

A global m
The 2

Our binary management system responds


to customers in East and West Japan.

n
to Asia and

Osaka Plant
(Osaka Distribution Center)

Osaka High-Tech Research &


Creative Development Center

Tohoku Plant

Osaka Kashiwara
Enterprise

Tsukuba Advanced Technology Center


(Tsukuba Distribution Center)

Jap an

Fujikin
Korea Service Center
China
Service Center
US Connecticut Factory

Taiwan Service Center

Carten Controls Ltd. (CCL)

Fujikin Vietnam Co.,Ltd


FUJIKIN BAC NINH INCORPORATED
Fujikin Singapore Pte. Ltd.

TK-FUJIKINCORPORATION
Head quarter

Fujikin Vietnam Co.,Ltd.

Taiwan Service Center

FUJIKIN BAC NINH INCORPORATED

12

TK-FUJIKINCORPORATION
2nd Factory

China Service Center

Fujikin Korea Service Center

History

Process & Instrumentation Valve Equipment for Oil & Gas.

Fujikin has been developing technology for over 80 years.

In May 1930,
's forerunner, Kojima Shouten, was founded at Itachibori in Osaka city, Japan by the former president, Junji Kojima.
We have a 80-years history of manufacturing super high precision flow control equipment, as well as specific purpose valves.

1930

May: We enter the


business of pipe materials,
machine tools and
wholesaling of metal parts.
Our main business
consists of exporting to
mainland China and
meeting domestic demand.
Company founder
and first president,
Junji Kojima

1935

January: A new
engineering department is
created to cater to surging
demand for valve cocks.
Meanwhile, the company
acquires the Shigino Plant
in Joto Ward, Osaka, and
operations are launched.
Products are sold under
the Carp trademark.

1948

January: Fujishima Koki


Kabushikigaisha, a
corporate body, is
established, to continue
with the business.
*Fujishima Koki
Kabushikigaisha continues
to do business as the
Osaka Plumbing Sanitary
Trade Assoc. in the Ebie
district of Fukushima
Ward, Osaka. The
company is a special
agent of ours and is
specially contracted to
pipe-equipment and
materials makers.

1953
October: A
patent for the
Needle Valve is
acquired.

1954

September: Fuji Kinzoku


Kosaku Kabushikigaisha is
founded and acquires the
Itachibori sales office and
the Shigino and Hikone
factories of the
aforementioned Fujishima
Koki Kabushikigaisha.
Efforts are launched to
enhance the sales office.

1961

September: The
superiority of forging over
casting for small valves
becomes clear, and so a
brass forging plant and a
processing facility are
constructed.

December: Though sales


in the Kanto region had
been handled by an agent,
the job is taken over by the
April: We participate in the
Tokyo Head Office, which
Fifth Osaka International
opens in the Hachijobori
Trade Fair.
district of Chuo Ward, in
Our unique line of
response to requests from
products, including a new
customers.
corrosive-resistant alloy,
FujibloyTM receives high
appraisal.

1962

1969

1964
1957

September: The late


Toshi Kojima succeeds
company
founder Junji
Kojima after
his sudden
passing.

1958

June: CarpectTM, a total


check valve is developed.

1959

March: Mechaload
ValveTM, a valve for use in
vacuums conditions is
developed.

November: A new factory


is constructed in Higashi
Osaka City to respond to a
surge in orders. The
Shigino and Hikone plants
are sold, and company
facilities are to be
concentrated in the new
location, where new
construction booms.

April: QS Valve, a
semi-permanent valve, is
developed, and a special
patent for it is acquired for
7 countries.

1966

May: World prices of


copper surge due to rising
oil prices. In response,
AlchessTM, a corrosive
resistant forged aluminum
valve, is successfully
commercialized.

1967

February: Labor-saving
fittings, dubbled LS
Fittings, that dont require
sealant are developed.

December: The Kansai


Branch opens at a location
adjacent to the Head
Office.

1970

May: The electromagnetic


needle valves are
developed.
June: The compact casted
ball valves are developed.
August: The W-bite
fittingsTM are developed
and go into mass
production.

1971

March: At the request of


our customers in Western
Japan, the Western Japan
Central Office is
established east of Hakata
Station, at the center of
Kita Kyushus industrial
zone.

13

November: Because of
the need to expand, Head
Office duties are relocated
to the Kita Hankyu Building
in the Shibata district of
Kita Ward, Osaka.

May: The Chugoku Office


is established in the Inari
district of Minami Ward,
Hiroshima, as a base for
the Central Shikoku
region.

November: Following the


relocation of the Head
Office, the old
headquarters is renamed
the Kansai Branch to focus
its activities on sales.

October: The Hokuriku


Central Office is
established in Fukuyama
City, as a base for the
Hokuriku region.

1972

July: The Nagoya Central


Office is established in
Nakamura Ward, Nagoya,
as a base for the Tokai
region.
September: Fuji Kyosokai
is launched as an
organization representing
cooperative factories.
October: We receive
approval for high-pressure
gas production from the
office of the governor of
Osaka.

1973

February: The Osaka


governor gives us an
award for contributory
achievements in the
implementation of
outstanding devices and
promoting the research
and development of new
technologies.
April: Our experimental
high-pressure gas
manufacturing plants are
certified and authorized by
the Minister of
International Trade and
Industry.

1974

July: The Yokohama


Central Office is
established in the Naka
Ward of Yokohama as a
base for the
Yokohama-Kawasaki
region.
October: The Keiyo Office
is established in the
Shinmachi district of Chiba
City, as a base for the
Chiba region.
October: The (former)
Fuji Technical Trading
Company is established in
Kita Ward, Osaka. We
succeed in producing the
first domestic
measurement valves for
nuclear power.

1975

January: The Fine


Ceramic Valves, which are
highly resistant to
corrosion and abrasion,
are developed.

1976

1978

March: We are selected


as a company based in
Osaka Prefecture with
outstanding quality control.
August: Micrometer
Super Mini Valves, for use
in ultra-fine adjustments,
are developed.

1979

November: The late Toshi


Kojima, Company
President, becomes
Chairman of the Board,
and the Vice President,
the late Shuhei
Ogawa,
becomes
President.

1980

To mark the companys


50th anniversary, Hideo
Itokawa, the father of
Japanese space and
rocket development,
comes to
deliver
a lecture.
March: Our technology
and the high level of
quality of our projects are
recognized, and our plants
become certified by TUV
of West Germany, a first
for our industry.

July: American professor


W. Edwards Deming, a
June: A world-leading
world authority on quality
cleanroom is established
control, visits and inspects
inside the Osaka Plant for
our plants. He praises our
the production of valves for unique quality-control
use in rockets.
system.

October: An office is
established in Rotterdam,
the Netherlands, as part of
our strategy aimed at
developing global markets.
October: We receive a
commendation award from
the High-Pressure Gas
Society of Osaka
Prefecture.

1981

February: The
development of electronic
valves with the worlds
smallest CV value is
launched.
March: An office is
established in Dusseldorf,
West Germany.
April: Our companys
plants appear on Mid-sized
Company Report, a
program on NHKs
Educational Channel, a
first for our industry and a
development that
generates a large
response.
July: An excursion takes
place to climb Mt. Fuji to
mark the companys 50
anniversary and raise
employee morale.
July: An office is
established in the U.S.
state of New Jersey.

1982

January: PhenixTM (now


New Generation
CosmixTM), a fine ceramic
valve jointly developed
with Kyocera Corp., is
given the 24th Judai Award
for New Products by
Nikkan Shimbun.

History

Process & Instrumentation Valve Equipment for Oil & Gas.

The award ceremony takes


place for the 1981 Judai
Award for New Products.

1984

January: The company


receives the 17th Medium and
Small Business Research
Institute Award from the
Medium and Small Business
Research Institute.
July: Fuji Technical Trading
Company changes name to
Fujikin Soft Co., Ltd.,
responding to the need for
software in the economy.

February: Dr. Pettit, dean of


Georgia State University in the
U.S., visits our company to
learn about advanced R&D.
April: We are recognized by
the Small and Medium
Enterprise Agency for having a
rationalized model plant for a
small or medium-sized
enterprise.
June: Osaka Kashiwara
Enterprise is completed.
September: The companys
name is changed to Fujikin
Inc.

1983

February: PhenixTM is given


the Grand Prize at the 8th
Annual Invention Awards.
September: Phenix a fine
ceramic value, receives the
1983 Chemical Plant Show
Excellent Product Award.
TM

May: To mark our 55th


anniversary, we publish the
first edition of The Zen, an
external PR magazine that
seeks to explore exchanges
around the theme of ultra and
the extreme that has
pioneered the 21st century.

October: The Fine Ceramic


Valves receive the Vaaler
Award in the U.S., and its
outstanding qualities are
thereby recognized.

November: The Sendai Office


is established as a base for
the Tohoku region.

March: We take part in the


1985 Science Tsukuba World
Exposition (Technocosmos) to
mark our 55th anniversary, as
one of the cutting-edge
companies based in Osaka. It
was the first time in history for
companies from different
industries to participate jointly
in a World Expo, and we
received a favorable
reception. Our participation
was organized under the
theme of an ultra and
extreme world.

1987

We successfully develop
MEGA-ONETM, Japans first
valve for use in semiconductor
manufacturing.

1988

January: The Osaka


High-Tech Research &
Creative Development Center
is completed. Fujikin Softs
Osaka Technoport Create
Center starts operation.
September: An office in San
Jose, in Americas Silicon
Valley, is opened.

July: We are commissioned to


serve as a director of Japan
Technomart and as a certified
member of the Japan
Technomart Foundation.

1985

A TV commercial

May: In order to cater to


advanced needs, our ultra
super cleanroom is installed in
the Osaka Kashiwara
Enterprise.

1986

January: The high-tech


restaurant Gourmet 5 opens in
Tsukuba Science City.
October: The late Shuhei
Ogawa, then Company
President, is presented the
Person of Merit
Commendation for
High-Pressure Gas Safety
from the Minister of
International Trade and
Industry.

1989

April: Stage 1 of the


construction of the Fujikin
Tsukuba Research Plant is
completed. Sapporo Central
Office is established.
November: An ultra super
cleanroom (Class 1) opens at
the Osaka Kashiwara
Enterprise.

1990

April: The Daruma Dome is


put on display at the Flower
Expo to mark 60 years of our
founding.

November: Then Chairperson


Toshi Kojima receives the
Fourth Order of the Sacred
Treasure. Publication of Work
Philosphy of the Daruma,
Conferring a
Commemoration.

July: The Fujikin pension fund


is inaugurated.
October: We receive a
commendationfor a superior
production facilityfrom the
Minister of Trade and Industry
at the 28th High-Pressure Gas
Safety Conference.

1992

March: The Toshi Kojima


Science Education Promotion
Fund is established (now
called the Fujikin
Kojima-Ogawa Science
Education Promotion Fund).

1996

April: We are recognized by


the Japan Patent Office for
using the industrial property
system and for our
contributions to regional
economic development.

1997

July: We receive a letter of


appreciation from the
University of Osaka for our
cooperation in their installation
of an ultra cleanroom.

April: Success is achieved in


artificially breeding Sturgeon
at the Fujikin Tsukuba
Research Plant.
October: The Fujikin Space
Environment Instruments
Lecture is established and
conducted on behalf of the
Department of Aerospace of
the University of Osaka
Prefecture.
November: Then President
Shuhei Ogawa receives the
Blue Ribbon Medal.
November: Daruma
Management, High-Tech
Company: the Fujikin Story is
published.

September: We publish
Beyond the Flow of Things, a
technical knowledge magazine
to mark the 70 years since our
founding.

October: The
Osaka Plant
acquires
international
IS09001
certification for
quality.

1999
November: Then President
Shuhei Ogawa, in his role as
director of the International
Business Organization of
Osaka, receives a certificate
of gratitude from the Governor
of Osaka for his efforts toward
the industrial development of
Osaka Prefecture.
November: We receive a
letter of commendation from
the Minister of Labor for our
efforts in promoting technical
skills.

Sophram ValveTM, a
soft-diaphragm valve for use in
biotechnology, is successfully
developed.

2000

March: Shu Nakamura earns


a Ph.D., becoming the third
employee to earn a doctorate.
Domestic share for valves
used in semiconductor
manufacturing reaches 70%,
while global share is 30%.

2001

February: Keihin Chuo


Branch opens.

November: Carton Controls


Ltd. (CCI, CCL), a U.S. and
Irish precision valve company,
is acquired.

1991

April: We receive the


Incentive Prize for the 3rd
Small and Medium-sized
Enterprise for products with
outstanding new technologies.

14

1993

January: We receive a top


certification for the N-II
Fittings, under a new
certification system, following
an amendment to the High
Pressure Gas Control Law.
February: We are certified for
the Compliance System under
COCOM regulations.

December: The late former


Chairperson Toshi Kojima is
conferred the Sixth Rank.

1998

March: Kazuya Ikeda and


Yasuyuki Shirai earned
doctorates as Fujikins first
social doctors.

April: Then Vice President


Hiroshi
Ogawa is
awarded the
Medal with
Yellow
Ribbon.
July:
We are a
participant in
the 2001
Internet
Exhibition.

History

Process & Instrumentation Valve Equipment for Oil & Gas.

2002

March: Masafumi Kitano,


Masaaki Nagase and Kaoru
Hirata earn doctorate degrees.
September: Fujikin Tsukuba
Research Plant acquires
IS014001, an international
environmental certification.
The Vietnam
Plant is
founded in
Hanoi to serve
as a
manufacturing
base for Asia.
October: The China Service
Center is established.

August: We move into Saito


Bio Incubator and Creation
Core Higashi Osaka.
September:
Upon the
sudden
passing of
former
company
President Shuhei Ogawa,
Hisae Ogawa is made
Chairman, and Vice President
Hiroshi Ogawa becomes
President.
The Taiwan Service Center is
established.

2003

June: We receive a letter of


appreciation from the
Association for International
Manpower Development of
Medium and Small
Enterprises, Japan, for our
training of students overseas.

2005

March: We participate in and


give support to the Seto
Peoples Pavilion at the Aichi
Expo.

2004

March: We receive the 1st


Manufacturers Awards: Part
Category Prize: Incentive
Award (from the Nihon Kogyo
Shimbun).
Fujikin Soft receives the
Grand Prize at the 5th Annual
IT Management Competition
(Nihon Kogyo Shimbun).

November: Fujikin Tsukuba


Research Plant receives a
commendation from Ibaraki
Prefecture for being an
excellent manufacturing
facility.

August: We receive the


1stMonozukuri (Manufacturing)
Nippon Grand Awards:
Excellence Prize from the
Prime Minister of Japan.

Atsushi Hidaka becomes the


latest employee to receive a
doctorate degree.
We receive the 2nd
Manufacturers Awards, Part
Category Prize, Incentive
Award, and the Higashi Osaka
Manufacturing Grand Gold
Prize.
June: The Korea Service
Center is established.
July: The Tohoku Service
Plant (now called the Tohoku
Plant) is established.

Akihabara Chuo General,


Koshin Central Office and
Yamanashi Service Center are
established.
October: Chairman Hiroshi
Ogawa is presented the
Person of Merit
Commendation from the
Minister of International Trade
and Industry for High-Pressure
Gas Safety.

2007

February: We receive the


Promotion of Machinery
Chairmans Award, New
Machine Promotion Prize.

2008

March: We receive the


Technology Award from the
Japan Society of Chemical
Engineers.

2009

April: The Japan Society of


Mechanical Engineers award
us with the Excellent Product
Prize for KongokunTM and
BunsankunTM.

April: Our sturgeon are


exhibited at Samehaku 2010
at the Osaka Aquarium
Kaiyukan.
July: Online retailing site is
launched.
July: TKSCT, a South Korean
manufacturer of valves and
joints, is acquired.

March: We receive the


Technology Award from the
Fluid and Particle Processing
Division of the Japan Society
of Chemical Engineers.
We receive the 4th
Manufacturers Awards, Part
Category Prize: Incentive
Award (from the Nihon Kogyo
Shimbun).

March: We receive the 3rd


Manufacturers Awards, Part
Category Prize: Machinery
Component Award (from
Nihon Kogyo Shimbun).
April: We are selected as one
of the Top 300 Notable Small
and Medium Enterprises.
May: Our first employee to
study overseas, Kensuke
Kojima, receives a bachelors
degree with a major in finance
from Boston University (and
he earns an MBA in
September 2007).

Employee Toru Hirai earns a


doctorate degree.
June: We receive a letter of
appreciation for our
contributions to the
development of the H-II
rocket, in particular for the
implementation of launch
service.

September: We receive the


Special Award in the Business
Category at the Japan New
Business Awards.

15

April: Our New


Headquarters opens in the
Akihabara district of Tokyo, an
urban information hub for
government, academia and
business.
May: We take part in the
Osaka Pavilion of the
Shanghai Expo as a special
sponsor and participant to
mark our 80th anniversary.

2006

February: In order to increase


production in Vietnam, we
move into a new factory that
has five times more floor
space than the previous
facility.

April: President and CEO


Hiroshi Ogawa is made
Chairman and CEO, and
Managing
Director Shinya
Nojima
becomes
President and
COO.

July: We receive a
commendation from the
Russian Association of
Fisheries, Managers and
Exporters for our sturgeon
operations.

October: We receive the


Manufacturers Awards, Parts
Grand Prize and Environment
Award (from the Nihon Kogyo
Shimbun, Monozukuri,
Nippon.)

October: We receive the


Manufacturers Awards, Parts
Grand Prize and Machinery
Award (from Nihon Kogyo
Shimbun, Monozukuri,
Nippon.)

2010

February: The Japan Society


of Mechanical Engineers
awards us the Chairmans
Award for Excellent Energy
Saving Equipment for
KongokunTM and
BunsankunTM.

May: The Chief Priest of


Kiyomizu-dera, Seihan Mori,
kindly creates calligraphy of
the character so to mark our
80th anniversary. In addition,
we commission the creation of
gourds and ornaments from
Shimizu Daisuke, believed to
be the progenitor of ceramic
manufacturing.

July: The Chief Priest of


Kiyomizu-dera, Seihan Mori, is
invited to take part as a guest
in the 57th edition of Super
Talk, which appears in THE
ZEN. The
magazine is
published as
a special
edition to
express
gratitude for
our 80 years
in business.

History
A special lecture event is held
at the Akihabara Dai Building
to mark our 80th anniversary.

August: Fujikin Singapore is


established.
October: We receive the
Manufacturers Awards, Part
Category Prize: Machinery
Component Award (from the
Nihon Kogyo Shimbun,
Monozukuri, Nippon.)

2011

April: Gallery [] SOU opens


on the 4th floor of the Osaka
Fukoku Seimei Building, as
part of our efforts to forge links
between the people of Osaka,
Osaka University and the
government, academia and
industry.
April: With the aim of
invigorating intellectual
property, we publish a
preliminary issue of New
Technomart SO, an
information-based magazine
about intellectual property
strategies.

July: Junichiro Kawaguchi, an


official responsible for the
planning of JAXAs Hayabusa
spacecraft, is invited to take
part as a guest in the 58th
edition of Super Talk, which
appears in THE ZEN. The
magazine is
published as a
special edition
to express
gratitude for
our 80 years in
business.

Process & Instrumentation Valve Equipment for Oil & Gas.

August: Issued first issue


New Technomart SO.

September: A special lecture


event is held at the Hotel
Grandvia Osaka to mark our
80th + 1 year anniversary.

2012

April: Osaka University

President Toshio Hirano is the


featured Super Talk guest in
the 59th edition of THE ZEN.
The
magazine is
a special
edition
published in
recognition of
our 80th + 1
year in
business.

April: We receive certification


as an American Society of
Mechanical Engineers
stampholder.
*TKSCT Corporation

October: Our second


employee to study overseas,
Masafumi Kitano, attends
Stanford University.
October: Fujikin Tsukuba
Research Plant receives a
commendation for a business
site from the Ibaraki Labor
Standards Association.

May: President Shinya Nojima


delivers a special lecture at
the Osaka Institute of
Technology.

April: Fujikin Umekita


Knowledge Center and
Science [] SO opens at
Grand Front Osaka.

November: Eight hundred


people attend the Koyasan
University Shuhei Ogawa
Memorial Lecture at Osaka
City Central Public Hall.

Prime Minister Shinzo Abe


was also in attendance at the
gala dinner.

2013

February: Tsukuba Research


Plant receives certification
according to the
OHSAS18001 international
labor standards.

February: We receive
Rostechnadzor (RTN)
certification from Russia
authorizing installation of
technical equipment.

May: Life Science site goes


public, marking our full-scale
entry into the market.
June: Construction begins on
a new production facility in
Vietnam (Bc Ninh).

August: Koyasan University


and Fujikin Shuhei Ogawa
Memorial Lecture in Umekita
held in Umekita.

November: We receive the


Shared Prize and Special
Prize for Manufacturing (from
the Nihon Kogyo Shimbun,
Monozukuri, Nippon.)

November: We receive the


Manufacturers Awards, Part
Category Prize, Incentive
Award (from the Nihon Kogyo
Shimbun,Monozukuri,
Nippon.)

November: We receive the


MONODZUKURI Awards,
Parts Category Prize:
Machinery Component Award
(Nihon Kogyo Shimbun /
Monodzukuri Nippon
Conference).

September: We receive the


Economy, Trade and Industry
Minister's Award presented by
the Prime Minister of Japan at
the 5th MONODZUKURI
(Manufacturing) Nippon Grand
Awards.

April: Kyoto University


President Hiroshi Matsumoto
is the featured Super Talk
guest in the 60th edition of THE
ZEN. The magazine is a
August: Umekita SOUAN
special edition published to
opens in Grand Front Osaka.
commemorate
reaching the
milestone of
having 60
editions
published.

16

October: We receive the


MONODZUKURI Awards,
Parts Category Prize:
Electrical and Electronic
Component Award (Nihon
Kogyo Shimbun / Monodzukuri
Nippon Conference)

October: Administrative
Vice-Minister of Defense
Masanori Nishi is the featured
Super Talk guest in the 61st
edition of THE ZEN. The
magazine is a
special edition
published to
recognize in
advance our
85th year in
business.

October: Koyasan University


and Fujikin Shuhei Ogawa
Memorial Lecture held at
Osaka City Central Public
Hall.

November: Vol. 10 published


as commemorative volume of
New Technomart SO.

2014

February: We are recognized


by the Ministry of Economy,
Trade and Industry as an IT
Management Implementation
Company.
February: New Technomart
SO remade into an
informational
magazine
focused on
intellectual
and human
capital
strategies.
March: We are awarded a
spot amongst the "Global
Niche Top 100 Companies"
recognized by the Ministry of
Economy, Trade and Industry.
May: Kongbu-ji Temple
Abbot and Sumpreme
Archbishop of Koyasan
Shingon-shu, His Holiness
Yukei Matsunaga is the
featured Super Talk guest in
the 62nd edition of THE ZEN.
The magazine is a special
edition
published in
recognition of
our 85th year
in business.

June: Information Security


Management System
ISO27001 certification
acquired.
October: We receive the
MONODZUKURI Awards,
Parts Category Prize:
Incentive Award (Nihon Kogyo
Shimbun / Monodzukuri
Nippon Conference).

November: Koyasan
University and Fujikin Shuhei
Ogawa Memorial Lecture held
at Osaka City Central Public
Hall.

2015

January: Fujikin Carp Group


medical devices adopted by
the Ministry of Defense.
February: Japan External
Trade Organization (JETRO)
Chairman Hiroyuki Ishige is
the featured Super Talk
guest in the 63rd edition of
THE ZEN. The magazine is a
special edition published to
recognize our 85th year in
business.

Certifications & Awards

ISO9001
Certificate

(Osaka Plant Higashiosaka)

ISO14001
Certificate

()
Tsukuba Advanced
Technology Center

Process & Instrumentation Valve Equipment for Oil & Gas.

OHSAS18001
Certificate

ISO 9001 / 14001


Certificate

()
Tsukuba Advanced
Technology Center

(Vietnam Plant)

OHASAS 18001
Certificate

(TK-FUJIKINCORPORATION)

Royal Dutch Shell


Vendor Approval
in SQS
Company name:
Company ID: 100127
Subscription to SQS - Stage 2

ASME-NPT
Certificate

(TK-FUJIKINCORPORATION)

Royal Dutch Shell


Vendor Approval
in SQS

Plant certified for


high-pressure gas safety by METI

Plant certified by Japanese


association for Marine survey,
inspection, and analysis

(Ministry of Economics,Trade and Industry)


(Osaka Plant)

17

EU Conformity
Certification
CE Marking

RTN Permission

Russian Federation Regulatory


Agency of Environment,
Technology and Nuclear Power

Certifications & Awards

Fourth Order of
the Sacred
Treasure

Blue Ribbon
Medal

Yellow Ribbon
Medal

Technology Award
form Japan Chemical
Industry Association

Association of fishery
production and
export President

ASME BPE
Subcommittee

(Russia)

Process & Instrumentation Valve Equipment for Oil & Gas.

The 1st Monodzukuri


Nippon Grand Awards
Excellence Prize

Top 300 Notable


Small and Medium
Enterprises
(2006)

Outstanding Performance
Product Award from
The Japan Society of
Mechanical Engineers

Vaaler Award

RoHS
Compliance

Type certification by
Nippon Kaiji Kyokai

(2005)

(1984)

(ClassNK)

etc.
18

PROFILE

Process & Instrumentation Valve Equipment for Oil & Gas.

The establishment of a solid business foundation enhances


the use of 21st century technology.
In the present severe business environment,
has continued with positive and solid management.
will challenge the future and continue to grow with the rest of the
Company Outline
Corporate

Name: Fujikin Incorporated

Foundation:

May 1930

Incorporation:
Sales:

September 1954

49.1 billion yen


(group total, as of March 31, 2015)

Assets:

16.1 billion yen (as of March 31,

Branch
Mizuho Bank, Ltd., Nishinoda Branch
Shoko Chukin Bank, Osaka Branch
Bank of Tokyo-Mitsubishi UFJ, Umeda

33.9 billion yen (as of March 31,

Joyo Bank, Osaka Branch

(group total as of March 31, 2015)


Employees:

2,600

(group total as of March 31, 2015)


Head

Development Bank of Japan, Kansai

Branch

5.4 billion yen

Average

(Osaka Area)

2015, non-consolidated)
2015, consolidated)
Capital:

Affiliated Companies
Accounts

Age: 33.77 years

Office:

2-3-2 Itachibori, Nishi-ku, Osaka

Accounts

(Tokyo Area)

Mizuho Bank, Ltd., Yaesuguchi Branch


Bank of Tokyo-Mitsubishi UFJ, Yaesu-dori
Branch
Bank of Tokyo-Mitsubishi UFJ,
Nihonbashichuo Branch
International

Accounts

550-0012, Japan

Mizuho Bank, Ltd.

Tel. +81-6-6532-5601

Fleet Bank

Corporate

Headquarters:

Kita Hankyu Bldg., 1-4-8 Shibata,


Kita-ku, Osaka 530-0012, Japan
Tel. +81-6-6372-7141
New

Headquarters

Akihabara Chuo Central:


Akihabara Dai Bldg., 1-18-13
Sotokanda, Chiyoda-ku, Tokyo
101-0021, Japan Tel: +81-3-3252-0301
Home

Office:

20-1 Kamitobawaranden, Minami-ku,


Kyoto 601-8133, Japan

Bank of Ireland

Chairman

& CEO
Hiroshi Ogawa

Operating

Officer
Osamu Fukata

President

& COO
Shinya Nojima

Senior

Managing Director
Michio Yamaji
Tetsuro Miyatani
Hisashi Tanaka

Senior

Corporate Director
Kazuya Ikeda
Tsuneo Yoshida
Hiroshi Ueda

Corporate

Director
Hideyuki Miyagawa

Standing

Corporate Auditor
Takao Kan

Corporate

Auditor

Kouji Kanao

Masahiro Nakamura
Nagami Kobayashi
Shigeaki Tanaka
Motohide Matsunaga
Toshihiko Nakatani
Yoshinori Shimomura
Kunihiko Daido
Eiichi Kitagawa
Koji Nishino
Kunio Ueda
Akio Kawabata
Katsuya Fujita
Tsutomu Shinohara
Masato Takahashi
Yoshiaki Ohtomo
Shuichi Shibata
Advisor
Tetsuya Kojima

Supreme

Honorary

Deputy

Corporate Director
Kazuo Akiyama
Toshiki Kanai
Michio Kuramochi
Shuichi Kuriyama

Advisor
Hideo Miyahara
(President Emeritus of Osaka University)

Fujikin Soft Co., Ltd.


All Japan Fuji Metal Communities
Organization
Fuji Kyosoukai Association.

Subsidiaries
Fujikin of America Inc.
Carten-Fujikin Incorporated
Carten Controls Ltd.
Fujikin Deutschland GmbH
Fujikin of China Incorporated

Falcon Incorporated

Fujikin Taiwan Incorporated

TK-FUJIKINCORPORATION
Vina World Link Co., Ltd.
Fujikin Vietnam Co., Ltd.
(Cong Ty Fujikin Vietnam)
FUJIKIN BAC NINH INCORPORATED
Fujikin Singapore Pte.Ltd.

Senior

Executive Corporate Officer


Naoki Akamatsu
Kazuyoshi Mihashi
Masami Maeda

Senior

Operating Officer
Mikio Inoue

Tel. +81-75-661-6791

19

PROFILE
Awards
The Fourth Order of the Sacred Treasure

Received by then-Chairperson Toshi Kojima for


her lifetime contribution to the scientific and
technological industries
(November 1986).
The Blue Ribbon Metal

Received by then-President Shuhei Ogawa for


his lifetime contribution to the development of
the valve industry
(November 1992).
The Yellow Ribbon Metal

Received by Representative Director &


Chairman President Hiroshi Ogawa for his
contributions to society and to the Japanese
economy through the development of electronic
flow-control system equipment (April 2001).
USA
The USA Vaaler Award
(1984)
Awarded by the Director General of the
Science and Technology Agency
National Commendation for the Promotion of
Science and Technology, 1st awards
ceremony
Received by then-Chairperson Toshi Kojima for
her many years of contribution to society
through corporate achievement
(October 1981).
Designated as a streamlined model factory for a
small and medium-sized enterprise (April 1982).

Process & Instrumentation Valve Equipment for Oil & Gas.

Commendation for Achievements in


Research, 9th awards ceremony
Received by Yoshiteru Sonoda at the Technical
Development Center for his research into the
ceramic flow-control valve (April 1983).
Winner of the 17th (corporate) Small and
Medium-sized Enterprise Award
January 1984.
Commendation for Originality and Creativity,
27th awards ceremony
Received by Atsuo Hashimoto from the
Production Division for his improvement on the
process operation of cryogenic flow-control
equipment (April 1986).
Commendation for the Promotion of Science
and Technology, 7th awards ceremony
Received by President Hiroshi Ogawa (then
Managing Director) for his contribution to the
development of electronic flow-control system
equipment (April 1987).
Commendation for the Promotion of Science
and Technology, 10th awards ceremony
Received by then-President Shuhei Ogawa for
his contribution to the development of small
valves for nuclear power plant facilities
(April 1990).
Commendation for Originality and Creativity,
41st awards ceremony
Received by Takashi Onishi at the Osaka Plant
for his improvements to the L-type joint process
jig (April 2000).
Awarded by the Minister of International
Trade and Industry (Prevention of
High-pressure Gas Disaster)
Received by Shuhei Ogawa for his many years
of contribution to the prevention of
high-pressure gas disaster. (October 1986).
Minister of International Trade and Industry
Award for Manufacturing Facility
High-pressure Gas Safety Excellence
Osaka Plant recognized as a manufacturing
facility with excellent high-pressure gas safety.
(October 1991)
Minister of Economy, Trade and Industry
Award for Distinguished Individual
Contribution to High-pressure Gas Safety
President Hiroshi Ogawa recognized for his
distinguished contributions in the area of
high-pressure gas safety. (October 2005)

Minister of Economy, Trade and Industry


Award for Manufacturing Supervision
Excellence in High-pressure Gas Safety
Susumu Mikami of the Osaka Plant.
(October 2011)

Japan Chemical Industry Association


Chemical Plant Show: Excellence Award
(1983).
The Technical Award
(2007).

Ministry of Economy Trade and Industry


Named by Minister of Economy Trade and
Industry as one of 300 Vigorous
Monodzukuri Small and Medium-sized
Enterprises that Support the Japan of
Tomorrow
(2006).

The Japan Society of Mechanical Engineers


The Award of Excellence
(2008).

2014 IT Management Awards


(February.2014)
GLOBAL NICHE TOP 100
(May. 2014).
Awarded by the Director General of Small
and Medium Companies
Commendation for Cooperative Activity
ServicesAll Japan Fuji Metal Communities
Organization
Received for successful management of small
and medium companies (January 1996).
Received for efforts in the enhancement of
small and medium company organization
(May 2001).
Awarded by the Director General of Patents
Commendation for Union Services (All Japan
Fuji Metal Communities Organization)
Fujikin Incorporated,
For effective utilization of patent rights.
(January 1996)
Awarded by the Minister of Labor
For efforts in promotion of technical ability
(November 1997).
Awarded by the Prime Minister of Japan
The 1st Monodzukuri Nippon Grand Awards:
Excellence Prize
(August 2005).
The 5th Monodzukuri Nippon Grand Awards:
Overseas deployment section, Award of
Excellence Ministry of Economy,Trade and
Industry
September 2013.

20

Japan Society for the Promotion of Machine


Industry
The New Machine Promotion Awards for
Chairmans Award
(2007).
The Japan Machinery Federation
Commendation for Outstanding Energy
Saving Parts and Components for
Chairmans Award
(2009).
Nikkan Kogyo Shimbun
Grand Prize for IT Management in Japan,
Nikkan Kogyo Shimbun Award
(2004).
Higashi Osaka Chamber of Commerce and
Industry
Higashi Osaka Monodzukuri Grand Prize
Golden Prize
(2005).
Japan New Business Conferences
1st Grand Prize for Japan New Business
Creation Special Prize
(2006).
Nikkan Kogyo Shimbun
Judai New Product Award
(1982)
1st Monodzukuri Grand Award for Parts
Parts Award
(2004)
2nd Monodzukuri Grand Award for Parts
Incentive Award
(2005)
3rd Monodzukuri Grand Award for Parts
Machinery Award
(2006)
4th Monodzukuri Grand Award for Parts
Incentive Award
(2007)
5th Cho Monodzukuri Award for Parts
Award for Parts Related to the Environment
(2008)

6th Cho Monodzukuri Award for Parts


Machinery Award
(2009)
7th Cho Monodzukuri Award for Parts
Machinery Award
(2010)
8th Cho Monodzukuri Award for Parts
Incentive Award
(2011)
6th Monodzukuri Associated Grand Award
Special Award
(2011)
9th Cho Monodzukuri Award for Parts
Machinery Award
(2012)
10th Cho Monodzukuri Award for Electricity
Electron Section Award
(2013
11th Cho Monodzukuri Award for Parts
Incentive Award
(2014
12th Cho Monodzukuri Award for Parts
Incentive Award
(2015

From the High Pressure Gas


Safety Institute of Japan
2005 Received the 1st Group Cooperation
Award
2006 Received the 2nd Group Cooperation
Award
2007 Received the 3rd Group Cooperation
Award
2009 Received the 5th Group Cooperation
Award
2011 Received the 7th Group Cooperation
Award
2012 Received the 8th Group Cooperation
Award

PROFILE
Qualifications
and Authorizations

High-pressure gas plant recognized by Minister of Economy,


Trade and Industry.
Company recognized by Minister of Economy, Trade and
Industry compliance program.
Practical technical proficiency testing plant recognized by
Minister of Health Labor and Welfare.
Designated as a streamlined model factory for a small and
medium-sized enterprise.
Plant certification by Nippon Kaiji Kyokai (ClassNK)

Process & Instrumentation Valve Equipment for Oil & Gas.

Type certification
by Nippon Kaiji
Kyokai (ClassNK)

Applicable product:

European safety
standard Conforms
with CE standards

Plant designated as a
government - supported
R&D factory for key
technology by the Agency of
Industrial Science and
Technology under the
Ministry of International
Trade and Industry Agency

Type certification
by Nippon Kaiji
Kyokai (ClassNK)

Applicable scope:
Vietnam Plant

OHSAS18001
Certified Plant
Applicable scope:
Tsukuba Advanced
Technology Center

ISO14001 certified plants

Applicable scope:
Tsukuba Advanced Technology Center

Sale and leasing


approval for
specially controlled
medical devices

Design and manufacturing


certification by ABS
(American Bureau of Shipping)

Applicable product:
Low-temperature valve

Type certification by GL

(Germanischer Lloyd classification society)

Applicable scope: FUJIKIN BAC NINH INC.

Stamp Holder Certifications of the


American Society of Mechanical
Engineers (ASME)

ISO9001 certified plants

Applicable scope: Osaka Plant


Higashi Osaka

KEPIC (Korea Electric


Power Industry
Code)-MN certified
(TK-FUJIKIN
CORPORATION)

ISO9001/14001 certified plants

ISO9001 certified plants


Plant designated as a model
of efficiency by the small and
Medium Enterprise Agency

IS027001

Applicable product: Low-temperature valve

ASME-N Nuclear power vessels, pumps,


piping systems for nuclear equipment
ASME-NPT Components for use in nuclear
power (parts for valve parts, etc.)

TargetPrimarily ship-related
productfittingsTK-FUJIKINCORPORATION


Certification by
(GLOBAL strength, Small & Medium Business

Certification of
compliance
with ASTM F1387
standards

Administration)

Applicable product:

Certification of
compatibility with
Swagelok Company

Applicable scope:
TK-FUJIKINCORPORATION

Certication by EIL

Applicable product:

(India's certifying body)

Acquisition of Russian
TRCU

TK-FUJIKIN
CORPORATION

(Technical Regulation Customs


Union Declaration of Conformity)

Certification by the Eurasian


Economic Community and under
the jurisdiction of the service
organizations certified by the
Russian Federation

TK-FUJIKIN
CORPORATION

OHSAS18001 Plant with Labor Safety


Hygiene Management System Certification
(TK-FUJIKINCORPORATION)

21

Target
Primarily oil and gas
product
fittings,
instrumentation valves,
piping (manifold valves)

IS612541/ ISO27001

FUJIKIN SOFT.CO.LTD
Head Office
FUJIKIN UMEKITA
KNOWLEDGE CENTER

1.The development,operation and


maintenance of software
2.The selling of medical device for telemedicine
software
3.The design and manufacturing of calendar
Passed the Electrical Machinery and
Apparatus with Explosion-proof Structure
Examination
Vice Chairmans Company of the Osaka
Prefecture High-Pressure Gas Safety
Association
Auditing Company of the West Japan Area
Minister Certification Examination Takers
Conference
Permanent Assembly Members Company of
Osaka Prefecture Central Meeting for Small
and Medium Companies
Participating Company in the Osaka Science
and Technology Center
Permanent Assembly Members Company of
the Higashiosaka Chamber of Commerce and
Industry Board Company
Permanent Member Company of the Higashi
Osaka Employees Association
Company for the Osaka Community
Foundation and Fujikin Kojima-Ogawa
Science Education Promotion Fund
Auditing Company of the Semiconductor
Equipment Association of Japan
Directors Company of the Japan Valve
Manufacturers Association
Japan-China Economic Association
Japan New Business Conference
Association for Rational Administration
(Osaka) Inc.
The New Business Conference Kansai
Manufacturing and Technology Promotion
Association
Japan Cross-industry Cooperation
Association
All Japan Fuji Metal Communities
Organization
Founding Company of Koyasan University
Fujikin Shuhei Ogawa Memorial Lecture
Directors Company of the NPO Higashi
Osaka Regional Vitalization Support Institution
Committee Company of Osaka-Tetsusyou
Health Insurance Society
* The minister of Economy, Trade and Industry
was formerly the Minister of Trade and Industry
Representative Officer Company of the
Kashiwara-Habikino Industrial Complex
Association
Ministry of Defense Osaka

PROFILE
Qualifications, etc.
D.Eng.:

Kotohiko Sekoguchi,
Kazuya Ikeda,
Masafumi Kitano,
Masaaki Nagase,
Kaoru Hirata,
Atsushi Hidaka,
Toru Hirai,
Kiyotaka Hayakawa,
Satoru Yamashita
Michio Yamaji
Masayoshi Kawashima
Doctorate of Science: Mikio Inoue
Doctorate of Pharmacology:
Toshihiro Hirao
Professional Engineer:
Kiyoshi Hiraoka(Fisheries)
MBA:
Tadashi Uwai,
Ryuichi Masuda,
Kensuke Kojima
Small &Medium Enterprise
Management Consultant:
Shinya Nojima
Kenji Oi
Labor and Social Security Attorney
Akira Itoh
Patent Attorney
Hidenobu Sato

Process & Instrumentation Valve Equipment for Oil & Gas.

Achievements in support and


training in economics
(commerce) and industry
grants
1965

Grant for patent application of


an outstanding invention for the
development of the long life QS
Valve (with patents granted in
seven countries)

1972

Grant for research and


development of automated
production facilities

1973

Grant for technological


improvement costs

1974

Grant for research into the


realization of inventions

1975

Grant for overseas patent


applications, and grant for
research and development of
new technologies and products

1979

Grant from Osaka Prefecture for


research in new technology and
product development

1981
1982

Grants for being an enterprise


that conducts research and
development of key national
technologies

1985
1988

Grants for technological


improvements from the Small and
Medium Enterprise Agency

1989

Grant from Osaka Prefecture for


research in new technology and
product development

1992

Grant from the Kinki Bureau of


International Trade and Industry
for technological improvement

1992

Grant from the Ministry of


International Trade and
Industry for the development of
knowledge-integrated businesses

1993

Grant from Osaka Prefecture for


research in new technology and
product development

1995

1996
1997

1998

Energy and Industrial Technology


Development Organizatio(NEDO)
for a project to elicit proposals
from the general public for new
industry creation

1998

2010

From the Japan Science and


Technology Agency for activities
to foster creative research results

Development assistance
for development costs for
the practical application
of innovations and for the
application of industrial
technologies

2011

1998
1999
2000

From the New Energy


and Industrial Technology
Development Organization
(NEDO) for research and
development of local consortium

Assistance to create high


levels of strategic and basic
technologies

2011
2012
2013

1999

Grant from the Small and


Medium Enterprise Agency for
advancement of new fields, etc.

Grant for important projects


with emphasis on Active Osaka
Promotion Fund (Development
assistance projects such as
hydrogen infrastructure)

2013

Assistance for the practical


application of venture company

1999
2000

The research item optimal


control by fuzzy control

2013
2014

1999
2000

Research and development


programs for new technologies
for promotion activities of
innovative technologies in
response to new technology
issues

Grant as part of assistance for


trial development, etc to support
the Small and Medium Enterprise
Agency, Small companies
manufacturing.

2014

Innovation Commercialization
Venture Support Project

2001

F/S new technology research


survey business (commissioning
business) for the Japan
Small and Medium Enterprise
Corporation

2002
2003

R&D new technology research


survey business (commissioning
business) for the Japan
Small and Medium Enterprise
Corporation

2003

Commissioning duties related to


basic technological development
for the safe use of hydrogen, etc.

2003

Project (a consortium) to
reinforce strategic and basic
technologies

2004

Grant under the Facilitation Act


for advancement of new fields,
etc. from the Small and Medium
Enterprise Agency

Research item: Experimental


study on development of
low-energy consumption
backlights and energy-saving
manufacturing technologies.

2005

From the Small and Medium


Enterprise Agency of Osaka
Prefecture for the cooperative
development of applied
technology by local industry,
academia and the government

Research and development


project for a regional
regeneration consortium of the
Ministry of Economy, Trade and
Industry

2009

Grant (as part of assistance for al


development, etc.) to support the
development of manufacturing

22

Potrebbero piacerti anche