Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
FILIX MHPD-X
FULL
SYNTHETIC
FILIX MHPD-X
SAE 10W/40
HIGH PERFORMANCE DIESEL ENGINE OIL
Product Information
FILIX MHPD-X IS AVAILABLE IN
SAE 10W/40
PERFORMANCE LEVELS
> API: SL/CI-4 plus/ CI-4/CH-4
> ACEA A3/B4; E7 (08)
> MB 228.3 ,228.1 , 229.1
SPECIFICATIONS
5 Ltr
D L 02 2 5
GRADE
Density 20 C
kg/m3
871
Viscosity 40 C
cSt
99,7
Viscosity 100 C
cSt
14,9
cP
<7000
Viscosity Index
156
Pour point
-36
Flash point
216
Sulphated ash
%wt
1,37
AVAILABLE PACKAGING
250 ML
500 ML
1L
4L
5L
20L
205L
1000L
FILIX MHPD-X
ACEA A3/B4
ACEA A3/B4
ACEA E7
ACEA E7
API SL
ACEA A3/B4 are stable, stay-in-grade oils intended for use in high performance
gasoline and direct injection diesel engines, and also suitable for applications
described under A3/B3.
Stable, stay-in-grade oil providing effective control with respect to piston cleanliness and bore polishing. It further provides excellent wear control, soot handling and lubricant stability. It is recommended for highly rated diesel engines
meeting Euro I, Euro II, Euro III, Euro IV and Euro V emission requirements and
running under severe conditions, e.g. extended oil drain intervals according to
the manufacturers recommendations. It is suitable for engines without particulate filters, and for most EGR engines and most engines fitted with SCR
NOx reduction systems. However, recommendations may differ between engine
manufacturers so driver manuals and/or dealers need to be consulted if in
doubt.
API SL
The SL specification was adopted to describe engine oils for use in 2001. It is
used in the service of certain gasoline engines in present and earlier passenger
cars, sports utility vehicles, vans and light trucks, operating under vehicle
manufacturers recommended maintenance procedures. Oils meeting API SL
requirements have been tested according to the American Chemistry Council
(ACC) Product Approval Code of Practice and may utilize the API Base Oil Interchange and Viscosity Grade Engine Testing Guidelines. They may be used where
API Service Category SL and earlier categories are recommended.
API CI-4+
API CI-4+
The CI-4+ specification is used in conjunction with API C-4, the CI-4 PLUS
designation identifies oils formulated to provide a higher level of protection
against soot-related viscosity increase and viscosity loss due to shear in diesel
engines. Like Energy Conserving, CI-4 PLUS appears in the lower portion of the
API Service Symbol Donut.
VW 505.00
VW 505,00
Passenger car diesel engine oil specification, minimum performance level CCMC
PD-2. Lists viscosities SAE 5W-50, 10W-50/60, 15W-40/50, 20W-40/50 requiring
13% max. evaporation loss and SAE 5W-30/40, 10W-30/40 requiring 15% max.
evaporation loss.
MB 229.1
MB 229,1
For petrol and diesel engines. Minimum quality required ACEA A2/B2 with additional limits on engine.
DYADE
DELIVER DURABLE