Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PRELIM EXAM IN
SMAW 11
Performance: ______
I DEFINITIONS OF TERMS: Choose your answer from the box. Write your answer on the
space provided are. (2pts. each)
Measuring tools
Wrench
Adjustable wrench
Pliers
Driver
hummer
Punches tool
C-clamp
hummer
Scraper
Machinist vise
chisel
Files
Screw driver
Hack saw
Tightening/loosening
Lubricating
Vernier caliper
Maintenance
Try square
Ball peen
Chipping
Cold
1. _______________ - a tool with movable jaw which makes it adjustable to various sizes of
nuts.
2. _______________ - a tool for straightening bending and deforming metals.
3. _______________ - used for removing slag on weld and with two surfaces, the tapered from
one side and round pointed on the side.
4. _______________ - a wedge shape tool used to shear, cut and chip metal.
5. _______________ - made on high grade steel hardened and tampered and has rows of teeth
that from, shape and finished metal by removing small chips and
something rough edges of the metal surfaces.
6. _______________ - a tooth cutting tool usually with a solid and adjustable frame.
7. _______________ - a process of maintenance where in oil is put in between moving parts of a
tool or equipment to prevent the tool from rust and damage.
8. _______________ - following routine procedures to keep the tools or equipment at its most
efficient condition.
9. _______________ - used to measure the dimension of an object or metal.
10._______________ - a tool to holding cutting and twisting wires.
11._______________ - used for permanent marking on a surface of metal.
12._______________ - a tool for removing points, burrs, and sharp edges from metal surface
and similar parts.
13._______________ - a hand tool that is designed to turn screws the blade is made of steel,
attached to one of which a wooden or plastic handle.
14._______________ - a process where tools and equipment are adjusted base in standard
procedure.
15._______________ - a precision measuring instrument used to measure the inside, outside the
diameter, well as depth of hole and slot.
16._______________ - an instrument used to measure the squareness of an object.
17._______________ - used for loosening and tightening lights and heavy nuts and bolts.
18._______________ - used for measuring or setting of distances, and to lay out arcs and circles.
19._______________ - is an all-purpose clamp that is generally used for all kinds of work.
20._______________ - is work holding tool for machining activity.
II MATCHING TYPE: Match column A with column B write only letter.
Column A
____1. A measuring tool used to measure squareness
of an object.
chisel
____2. Tools used for measuring or setting a distance
and to lay out arcs and articles.
____3. Rectangular in shape and tampered slightly in
width and thickness it is commonly used in general work.
____4. Used for chipping flat surfaces cutting of revels and
metal fasteners, thin sheets and small bars.
Column B
A. Hacksaw
B. Cold
C. Try square
D. Flat File
E. Divider
III MULTIPLE CHOICES: Choose and encircle the letter of the correct answer.
1. A tooth cutting tool usually with the solid and adjustable frame
a. Hacksaw
c. Screw Driver
b. Hammer
d. Wrench
2. Tool used for loosing and tightening light and heavy nuts and bolts.
a. Hacksaw
c. Screw Driver
b. Ball Hammer
d. Wrench
3. The tool is used to tighten and loosen screw by pulling or pushing screws in a rotating
manner.
a. Hacksaw
c. Screw Driver
b. Hammer
d. Wrench
4. Defective Hand Tools are kept and _________________.
a. Marked as defective
b. Mix together with the non0defective tools
IV ENUMERATION:
What are the four type of chisels?
1.
2.
3.
4.
Prepared by:
Checked by:
Wenifredo Oclarit
Beltran
SMAW Instructor
Ma. Theresa S.
High School Principal