Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Brothers, Inc.
Seward, NE
LIGHTING POLES
& SIGN POSTS
www.hughesbros.com
Hughes Brothers, Inc.
P.O. Box 159 / 210 N 13th / Seward, NE 68434 / Phone (402) 643-2991 / Fax (402) 643-2149
I-1
4-3/8
3/8 Radius
(Typical)
5-1/8
6-3/4
5-3/4
5-1/8
Standard Sizes (Virtually any size available, inquire Hughes Brothers Engineering Department.)
1 x 1-1/4
Internal Wire
Raceway (Typical)
I-2
6-3/4 x 6
30-0/5-6
8.7
6.6
5.2
4.2
3.4
www.hughesbros.com
P.O. Box 159 / 210 N 13th / Seward, NE 68434 / Phone (402) 643-2991 / Fax (402) 643-2149
2014 Hughes Brothers, Inc.
Specifications:
Open defects such as knot holes exceeding 1/2 in diameter or
wane exceeding 1/4x12 shall be filled with wood filler. Sides
shall be S4S with edges eased to 3/8 radius.
2-6
Internal raceway is 1 x 1-1/4 and runs the full length of the pole.
Pole
Length
Part No.
X
Y
W
15-6
19-0
24-0
30-0
18-0
C4773.1A-1L
C4773.1B-1L
C4773.1C-1L
C4773.1D-1L
C4773.2A-1L
3-6
4-0
4-0
5-0
4-0
12-0
15-0
20-0
25-0
14-0
4-1/4
4-1/4
5-1/8
5-1/8
4-1/4
D
5-1/8
5-1/8
5-3/4
5-3/4
5-1/8
Internal
Raceway
www.hughesbros.com
Hughes Brothers, Inc.
P.O. Box 159 / 210 N 13th / Seward, NE 68434 / Phone (402) 643-2991 / Fax (402) 643-2149
I-3
5-1/8
4-1/4
15-6
12-0
TM Loc
1-6
3-6
2-6 1-0
1-1/4
Detail A
Gr. Line
P12
30
Detail A
5-1/8
4-1/4
190
15-0
TM Loc
Gr. Line
P15
5-3/4
5-1/8
TM Loc
1-6
Gr. Line
P20H
5-1/8
5-3/4
Detail A
24-6
I-4
4-0
2-6 1-6
1-6
4-6
2-0
2-6
Detail A
30-0
25-0
TM Loc
P25H
2-1/2
1-6
Gr. Line
5-0
2-6
2-6
2-1/2
Detail A
www.hughesbros.com
P.O. Box 159 / 210 N 13th / Seward, NE 68434 / Phone (402) 643-2991 / Fax (402) 643-2149
2014 Hughes Brothers, Inc.
PAGE in 2013
Protect the top of the pole by installing pole caps. These are manufactured from 11 gauge steel and are
available in galvanized or power coated finishes.
Pole Size
Galvanized
Powder Coat (Specify Color)
4-3/8 x 5-1/8
C4773.3A
C4773.3A-B(color)
5-1/8 x 5-3/4
C4773.3B
C4773.3B-B(color)
Aluminum
C4773.3A-A
C4773.3B-A
4-9/16
4-9/16
1-1/4
1-1/4
5-5/16
5-5/16
The pole top luminary support provides a means to mount slipfit fixtures on a 3 OD pipe at the top of the pole.
Pole Size
4-3/8 x 5-1/8
5-1/8 x 5-3/4
6 x 6-3/4
Galvanized
C4773.10A
C4773.10
C4773.11B
4-9
/16
16
-5/
5/16
Dia. Holes
(For 4-3/8 x 5-1/8
Pole Top)
5-5
/16
/1
6-1
5/16
Dia. Holes
(For 5-1/8 x 5-3/4
Pole Top)
www.hughesbros.com
Hughes Brothers, Inc.
P.O. Box 159 / 210 N 13th / Seward, NE 68434 / Phone (402) 643-2991 / Fax (402) 643-2149
I-5
PAGE in 2014
(Specify Color)
2-0
1-7/16
5-1/4
9/16 Holes
3
C4773.6A (Galvanized) and C4773.6A-B
(Specify Color)
1-4 1/2
1-8
7/16 Holes
I-6
www.hughesbros.com
P.O. Box 159 / 210 N 13th / Seward, NE 68434 / Phone (402) 643-2991 / Fax (402) 643-2149
2014 Hughes Brothers, Inc.
www.hughesbros.com
Hughes Brothers, Inc.
P.O. Box 159 / 210 N 13th / Seward, NE 68434 / Phone (402) 643-2991 / Fax (402) 643-2149
I-7
B2676-B
I-8
www.hughesbros.com
P.O. Box 159 / 210 N 13th / Seward, NE 68434 / Phone (402) 643-2991 / Fax (402) 643-2149
2014 Hughes Brothers, Inc.
B2676-B2
B2676-D
B2676-D2
B2676-B2
B2676-E
www.hughesbros.com
Hughes Brothers, Inc.
P.O. Box 159 / 210 N 13th / Seward, NE 68434 / Phone (402) 643-2991 / Fax (402) 643-2149
I-9
1-1/2
1-6
3
1 Holes with Saw
Cut Between
(Typ. Both Sides)
I-10
www.hughesbros.com
P.O. Box 159 / 210 N 13th / Seward, NE 68434 / Phone (402) 643-2991 / Fax (402) 643-2149
2014 Hughes Brothers, Inc.
www.hughesbros.com
Hughes Brothers, Inc.
P.O. Box 159 / 210 N 13th / Seward, NE 68434 / Phone (402) 643-2991 / Fax (402) 643-2149
I-11
Holes for the posts should be bored with an auger. The type L post requires a 30 diameter hole, and the type
M post requires a 24 diameter hole. The holes should be bored to an embedment depth following standard
state specifications for each particular sign application. Each should be backfilled with a granular fill in a
manner as specified in the states standard specifications. The breakaway feature should be cut into the
signpost after the posts are set. First, carefully drill one inch holes at the proper locations on the signpost,
then cut the web between the holes, taking care not to cut beyond them.
Do not splice LVL breakaway signposts together or remove the protective metal cap from the top of the post.
Fasten the sign panel to the posts with lag screws in predrilled pilot holes. Fastener values (nails, bolts,
screws, etc.) are as provided for solid sawn Douglas fir in the National Design Specification for Wood
Construction published by the NFPA. The lag screws should be installed and tightened with a hand wrench.
1-1/4 Typ.
1-1/4 Typ.
8
Treated Weight
14 lbs. per ft.
15
Treated Weight
17 lbs. per ft.
18
3
Type M Post
I-12
Type L Post
www.hughesbros.com
P.O. Box 159 / 210 N 13th / Seward, NE 68434 / Phone (402) 643-2991 / Fax (402) 643-2149
2014 Hughes Brothers, Inc.