Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CONNECTION SYSTEM
CONNECTORS, CABLES AND
MEDIA CONVERTERS
UL Recognition
LEMO connectors are recognized by the Underwriters Laboratories (UL). The approval of the complete system (LEMO
connector, cable and your equipment) will be easier because LEMO connectors are recognized.
CE marking
CE marking
means that the appliance or equipment bearing it complies with the protection requirements of one or
several European safety directives. CE marking
applies to complete products or equipment, but not to electromechanical components, such as connectors.
RoHS
LEMO connector specifications conforms the requirements of the RoHS directive (2011/65/EU) of the European Parliament
and the latest amendments. This directive specifies the restrictions of the use of hazardous substances in electrical and electronic equipment marketed in Europe.
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
Table of Contents
HDTV System Overview ...........................................................................................................................................................................................4
LEMO pioneered and set the standard for HDTV ........................................................................................................................................6
3K.93C series
Interconnections ................................................................................................................................................................................................7
Part section showing internal components ..............................................................................................................................................8
Technical characteristics ................................................................................................................................................................................8
Part number example ......................................................................................................................................................................................9
Models ................................................................................................................................................................................................................10
Insert configurations ......................................................................................................................................................................................12
Fibre optic contact ..........................................................................................................................................................................................12
Accessories ......................................................................................................................................................................................................13
Patch panel .......................................................................................................................................................................................................15
Tooling ................................................................................................................................................................................................................16
NORTHWIRETM HDTV cables
NORTHWIRE hybrid camera cable according to SMPTE 311 and ARIB standards ............................................................17
Hybrid HDTV fibre optic cable part number ..........................................................................................................................................18
Cable assembly ..............................................................................................................................................................................................19
SMPTE 311M standard cable assemblies ............................................................................................................................................22
ARIB cable standard cable assemblies .................................................................................................................................................22
MEERKATTM HD converter
A compact solution for Sony SD, Grass Valley (Thomson ) SD/HD camera based systems ....................................23
Technical characteristics .............................................................................................................................................................................24
List of SD or HD compatible cameras.....................................................................................................................................................24
Local camera power ......................................................................................................................................................................................25
Accessories ......................................................................................................................................................................................................26
SERBALTM converter
SERBAL TM - SMPTE Electrical Reconfigurable Bidirectional Alternative Link.............................................................................27
Technical characteristics .............................................................................................................................................................................28
SHACKTM converter
SHACKTM - SMPTE conversion device for singlemode fibre (SC, ST, FC or LC) ...................................................................29
Technical characteristics .............................................................................................................................................................................30
Models ................................................................................................................................................................................................................30
MULTISHACK 3XTM or 6XTM converter
Introduction .......................................................................................................................................................................................................31
MULTISHACK 3XTM - conversion system ..............................................................................................................................................32
Technical characteristics .............................................................................................................................................................................32
MULTISHACK 6XTM - conversion system ..............................................................................................................................................33
Technical characteristics .............................................................................................................................................................................33
HD Z-LINKTM fibre optic link system
HD Z-LINKTM ....................................................................................................................................................................................................34
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
FXW PUW
FMW
PUW
CCU
SERBAL
HD/SDI
4 way fibre cable
Coax cables
Local 12V source (1.5 A max)
Stadium/building application
PHW SHACK
CCU
FXW
PUW
FMW
2 x SC / 2 x ST / 2 x FC / 2 x LC
CCU
Triax HD
CCU
MEERKAT
FXW PUW
12 V - 1.5 A max
2 km - SMPTE 311 cable
(for Grass Valley systems: 1 km - SMPTE 311 cable)
Studio application
FMW PUW
Wall box
SMPTE / ARIB cable
INFRASTRUCTURE
FMW PUW
Wall box
FXW
PUW
CCU HD Z-Link
www.lemo.com
CAMERA SIDE
SMPTE / ARIB cable
FUW
FUW
EDW
HDTV Camera
HDTV Camera
PUW
FXW
EDW
6 way fibre cable
FXG
EGG
FGG
PHG
Mains power
Mains power
SERBAL
HD/SDI
HDTV Camera
Coax cables
FGW SHACK
EDW
Local power
HDTV Camera
MEERKAT
FUW
Triax HD
HDTV Camera
Wall box
INFRASTRUCTURE
PEW
FXW
PUW
FUW
HDTV Camera
FUW
EDW
HDTV Camera
HD Z-Link
HD Camcorder
www.lemo.com
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
3K.93C Series
The LEMO 3K.93C connectors with keys (W) were developed to meet the critical requirements of the new generation of
digital HDTV cameras.
The main features of this series are as follows:
Security of the LEMO Push-Pull self-latching system
Fitted with the standard LEMO F2 fibre optic contacts.
Conforms to the Japanese ARIB technical report BTA S-1005B, to the ANSI/SMPTE 304 M-1998
and 311M-1998 standards and to the European EBU Technical Recommendation R100-1999.
Qualified for use in UL approved equipment such as those specified in UL 1419
Professional Video and Audio Equipment.
Cabled connectors have obtained the EC Attestation of conformity No: N8 00 03 39058 001
from the German TV Product Service.
The 3K.93C series consists of eleven models which will accept cables specific to this application.
It includes the HEAVY DUTY line with stainless steel shells that is guaranteed to at least 20,000 mating cycles and offer
more resistance to heavy wear conditions.
Models (page 10)
Straight plugs
Fixed sockets
Free sockets
FUW
PUW
EDW
FGW
PHW
Fixed sockets
Fixed plugs
EBW
FXW
PEW
ENW
FMW
PBW
FMW
EDW
PUW
FXW
FUW
CCU
PUW
Studio Configuration
HDTV
Camera
EDW
fixed socket
FUW
straight plug
PUW
free socket
FXW
fixed plug
FMW
fixed plug
CCU
PUW
free socket
Patch unit
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
17
12
16 17 14 15
Straight plug
1 shell
1 outer shell
10 split-insert carrier
2 grounding crown
2 latch sleeve
3 inner shell
12 female LV contact
3 retaining ring
4 front ring
13 earthing body
4 insulator
5 collet nut
14 crimp ring
5 female HV contact
6 insulator
6 FO contact
7 male HV cont.
16 extended shell
7 O-ring
8 FO contact
17 o-ring
9 FO alignment device
with tag
8 male LV contact
17
10
11
13
Technical characteristics
Materials and treatments
Component
Material (Standard)
Brass (UNS C 38500)
0.5
0.3
without treatment
Special brass
Grounding crown
0.5
without treatment
Special brass
Latch sleeve
0.5
0.3
without treatment
Locking washer
0.5
0.5
0.5
1.0
0.5
1.5
Clips
Cu-Be (FS-QQ-C-530)
Insulator
PEEK
Crimping tube
without treatment
0.5
without treatment
Electrical
Optical
Characteristics
Value
1012
Standard
Insulation resistance
>
< 1.6 m
< 4.8 m
< 3.6 m
< 30 dBV/m
EN 55022 class B
< 37 dBV/m
EN 55022 class B
Radiated
emission
0.5
Characteristics
Value
Standard
Method
Insertion
Method B
0.10 dB
IEC 61300-03-04
45 dB
Branching
IEC 61300-03-06 Device Met.
~30 dB
Branching
IEC 61300-03-06 Device Met.
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
Vibration
Standard
10000 cycles
IEC 61300-02-02
8000 cycles
IEC 61300-02-02
IEC 61300-02-02
up to 95% at 60C
IEC 61300-02-19
High temperature
+80C
IEC 61300-02-18
Low temperature
-40C
IEC 61300-02-17
Characteristics
Temperature cycling
-55C + 90C
Cable retention
1000 N
IEC 61300-02-04
Impact (Method A)
IEC 61300-02-12
IP 68
IEC 60529
> 144 h
0.1
20 Hz
20-60 Hz
60-200 Hz
200-320 Hz
320-600 Hz
600-2000 Hz
2000 Hz
duration
0.01
0.009 G /Hz
+9 dB / octave
2
0.24 G /Hz
-3 dB / octave
2
0.147 G /Hz
-6 dB / octave
2
0.014 G /Hz
180 s / axis
0.001
10
20
50 100
200
500 1K
2K
5K
Frequency (Hz)
F U W. 3 K . 9 3 C . T L E C 9 6 Z
Variant
Cable :
74 = 6.2 to 7.4 mm
96 = 8.9 to 9.5 mm
12 = 11.6 to 12.5 mm
Series: 3K
Type: 93C
Fibre contact:
(page 12)
Housing:
T = stainless steel
Insulator: L = PEEK
Model
FUW.3K.93C.TLEC96Z = Straight plug with keys (W), 3K series, mixed type to accept 2 F2 type fibre optic contacts, 2 power and 2 signal
electrical contacts, stainless steel housing, PEEK insulator, female crimp signal contacts, cable fixing type T for 9.2 mm diameter cable,
and nut for fitting a bend relief.
Fixed socket
Model
Series: 3K
Type: 93C
E D W. 3 K . 9 3 C . T L E
Fibre contact:
(page 12)
Insulator: L = PEEK
Housing:
T = stainless steel
EDW.3K.93C.TLE = Fixed socket with rear square flange, keys (W), 3K series, mixed type to accept 2 F2 type fibre optic contacts, 2 power
and 2 signal electrical contacts, stainless steel housing, PEEK insulator, male crimp signal contacts.
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
9 3 C
~94
135 maxi
115 maxi
101 maxi
3.5 + 0.1
0
10
Panel cut-out
3.5 + 0.1
0
42.5
23
23.2 + 0.1
0
29
0.1
23.2 + 0
3.5 + 0.1
0
42.5
Panel cut-out
23
10
3.5 + 0.1
0
30
20.6
38
0.1
23.2 + 0
30
38
~61
20.6
19.5
19
9.2 0.3
~74
23.2 + 0.1
0
3 K
29
22.5
Panel cut-out
Panel cut-out
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
10
www.lemo.com
24.2 + 0.1
0
31
42.5
22.6 + 0.1
0
~98
23
9.2 0.3
11.3 max
Panel cut-out
23
30
139 maxi
4.5
7.5 max
24.2 + 0.1
0
~136 maxi
22.6 + 0.1
0
Panel cut-out
136 maxi
23.2 + 0.1
0
29
3
23
3.5 + 0.1
0
22.5
Panel cut-out
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
11
Insert configurations
93C
Creepage distance
and air clearance (mm)
AWG range
Contact function
Number of contacts
Socket insulator
Plug insulator
Fibre optic
contact
Reference
9 3 C
Contact (mm)
42 1000
10
~ 31.2
~ 31.2
Ref.
4.4
4.4
11.9
Contact
Ferrule
hole
Type
Gender
Note
Ref.
125 m
Crimp
Male
PSS.F2.BA2.LCE30
Contact
Ferrule
hole
Type
Gender
Note
125 m
Crimp
Female
FFS.F2.BA2.LCE30
FFS.F2.BA2.LCT10
125 m
Epoxy
Male
PSS.F2.BA2.LCT10
125 m
Epoxy
Female
FFS.F2.BX2.LCE30
125.5 m
Crimp
Male
PSS.F2.BX2.LCE30
125.5 m
Crimp
Female
FFS.F2.BX2.LCT10
125.5 m
Epoxy
Male
PSS.F2.BX2.LCT10
125.5 m
Epoxy
Female
FFS.F2.BB2.LCE30
126 m
Crimp
Male
PSS.F2.BB2.LCE30
126 m
Crimp
Female
FFS.F2.BB2.LCT10
126 m
Epoxy
Male
PSS.F2.BB2.LCT10
126 m
Epoxy
Female
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
12
www.lemo.com
Accessories
GMA Bend relief
Dim. (mm)
Part number
A
GMA.3B.090.DN
42
GMA.4B.011.DN
11
60
Note: The last letter N of the part number indicates the colour black of
the bend relief. For others colour, refer to the table below and replace letter N by the letter of the colour required.
Ref.
Colour
Ref.
Colour
Ref.
Colour
blue
yellow
red
white
brown
orange
grey
black
green
Part number
GMF.3K.085.EANZ
Material: black ALCRYN
Part number
GMP.3K.085.EANZ
Material: black ALCRYN
Colour
GMF.3K.265.RG
grey
GMF.3K.265.RN
black
GMF.3K.265.RR
red
GMF.3K.265.RV
green
Material: Silicone
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
13
Blanking caps
Part number
BHA.3K.100.EAN
BRA.3K.200.EAN
BFG.3K.100.EAN
BHA.3K.100.715EN
BRF.3K.200.EAN
BRA.3K.100.715EN
BHA.3K.100.EAN
FMW, FXW
BRA.3K.200.EAN
EDW, PEW
BFG.3K.100.EAN
FMW, FUW
BRF.3K.200.EAN
PUW
BHA.3K.100.715EN
FMW, FXW
BRA.3K.100.715EN
GM Gaiters
Colour
Dimension
L (mm)
For connector
model
GMP.3K.140.165PER
red
165
PUW
GMP.3K.140.165PEN
black
165
PUW
GMF.3K.140.156PEV
green
156
FUW
GMF.3K.140.156PEN
black
156
FUW
14 mm
Part number
Material: PVC
Dimensions (mm)
Part number
M
N
BRR.3K.200.PZSG
29
29
23
8.1
33.2
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
14
www.lemo.com
Patch panels
PB
Patch panel
2U panel with one row of 6 or 10 plugs or sockets of the
3K.93C Series.
P B G. 3 K . 9 3 C . M W 9 6 0 6
Ref.
Colour
Ref.
Ref.
Cable (mm)
Nb
of connectors
beige
MW
Plug FMW
9606
8.9 to 9.5
grey
EW
Socket PEW
1206
11.6 to 12.4
black
BW
Socket PBW
9610
8.9 to 9.5
10
nat. anod.
1210
11.6 to 12.4
10
An integrated panel with built in splice tray and connector junctions for
use where space is limited, either at a wallbox or a patching unit.
Up to 3 can be mounted side-by-side to fit in 3U rack dimensions.
Rack mounted splice tray of 2U height with connector junctions for patch
unit. Can accommodate up to 10 LEMO connectors. The modular design
of the unit along with blanking plates provides opportunity for increasing
numbers of channels up to 10.
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
15
Tooling
DCS.F2.N02.PA Fibre Optic one-click cleaner
Insert the one-click cleaner into the insulator and push until an audible
click is heard. The cleaner uses a mechanical push action to advance
an optical grade cleaning tape. More than 500 cleaning per cleaner.
Product includes special LEMO F2 ferrule adaptor.
This cleaning tool comes with a bush for different cleaning configurations.
More than 500 cleaning per cleaner. This cleaner is for on-site purposes
only and should not replace regular maintenance cleaning with cotton
buds and alcohol.
Fibre optic cleaning kit of 2 cotton buds, 1 dry and 1 being soaked in IPA
(Isopropyl Alcohol) used for cleaning the fibre optic contacts.
The LEMO cable puller, is a pull through tool that allows passing the
cable through narrow sections and protects the optical fibre during
installation.
This cable tester provides a quick and easy means of checking the
functionality of HD hybrid fibre cables and cable systems. A laser source
checks the fibres giving an indication of the attenuation through the whole
cable or cable system, and electrical tests check for continuity of both the
power and control conductors.
Note: Available on request.
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
16
www.lemo.com
PVC
PUR (LSZH)
Power wire
Black (x2)
Optical fibre #1
Blue
Power wire
Black (x2)
Optical fibre #1
Yellow
Power wire
Black (x2)
Optical fibre #1
Blue
Signal wire
Red
Signal wire
Grey
Signal wire
Red
Signal wire
Green
Signal wire
Red
Signal wire
Grey
Strength
member
Power wire
White (x2)
Optical fibre #2
Yellow
Strength
member
Power wire
White (x2)
Strength
member
Power wire
White (x2)
Optical fibre #2
Blue
Optical fibre #2
Yellow
Cable specification
Core type
Power (Aux)
Control (Signal)
Optic fibre
Strength member
Nb of cores
20
24
19/0.185
7/0.193
19/0.330
Cladding diameter - m
125 1 m
0.88
0.58
1.75
0.41
0.30
0.38
1.72
1.22
0.9
2.51
0.127
1.14
9.2
137
43
184 (SMPTE)
1750
1750 (SMPTE)
10000
10000
UL Listing
700N
Allowable tension
-40C / +80C
Optical fibre
Item
Transmission loss
Wavelength
Characteristics
Conversion
condition (km)
Conversion
formula
= 1.31 m
up to 0.4
0.5xLdB
= 1.31 m
L < 0.4
0.5x0.4dB
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
17
N . 3
K . 9
C . 0
N C
S
Version
S = SMPTE 311M
K = Aramid strength
member similar
to Kevlar
Shielding
C = Tinned copper
Jacket color
N = Black RAL 9005
(other colours
on request)
Cable
Fiber optic
Jacket material
P = PVC
U = PUR 1)
Vendor: N = Northwire
Jacket max
068 = 6.8 mm 2)
092 = 9.2 mm
160 = 16.0 mm
Series
Type
Note: 1) PUR outer jacket for high flex and LSZH (Low smoke zero halogen). Recommended for cold temperatures (-40C).
2) Recommended for assembly length up to 5 meters.
ARIB standard
C
N . 3
K . 9
C . 0
N C
A
Version
A = ARIB standard
Cable
Fiber optic
Vendor: N = Northwire
Series
Type
Shielding
C = Tinned copper
Jacket color
N = Black RAL 9005
(other colours
on request)
Jacket material
P = PVC
Jacket max
092 = 9.2 mm
160 = 16.0 mm
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
18
www.lemo.com
Cable assembly
Part Number Example
Cable
M F
P . 3
K . 9
C . A M
S = SMPTE 311M
A = ARIB
K = Aramid strength
member similar
to Kevlar
Model 1 (table 1)
Model 2 (table 1)
Cable supplier
& sheath color
(table 4)
Cable length
MFP.3K.93C.AM025NS = 1 FUW plug and 1 PUW socket (key W), 3K.93C series, on a SMPTE 311M screened cable,
25 m length, sheath 9.2 mm, black RAL 9005 jacket color, with GMF/GMP bend relief with cap.
Table 2
Sheath
& material
Table 3
Length unit
& gaiters
Red gaiter free socket 2 black 2 yellow
No
Green gaiter plug
gaiters gaiters
Gaiter
Code
F
M
P
E
B
9.2
4.2
6.8
12.0
16.0
PUR
FUW
FMW
PUW
PEW
PBW
PVC
Sheath
(mm)
Code
Model
1&2
A
B
C
D
E
R
S
T
U
V
Table 4
Cable supplier
& sheath color
cm
dm
m
km
inch
feet
C
D
M
K
I
T
E
F
G
L
Cable supplier
& sheath color
N
Code
Table 1
Model
N
G
A
F
B
Northwire Black
Northwire Grey
Northwire Blue
Furukawa Black
Belden Black
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
19
MFP
Assembly cable with one straight plug (FUW) and one straight socket (receptacle) (PUW), both complete with GMF/GMP
bend relief with cap.
FUW + GMF
MFP
PUW + GMP
Assembly cable with one straight plug (FUW) and one straight socket (receptacle) (PUW), both complete with GMF/GMP
bend relief with cap and gaiters.
FUW + GMF
PUW + GMP
BHA
FMW
BRF
PUW
BHA
FMW
PEW
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
20
www.lemo.com
M X
Model
X = FXW
D = EDW
Cable length (cm)
T = Pigtail (LC)
MXT.3K.93C.ZZZC050 = 1 FXW plug (key W), 3K.93C series and one pigtail (LC) on the other side, 50 cm length.
MXT
Assembly cable with one fixed plug (FXW) and one pigtail (LC) complete with BHA cap.
FXW
BHA
BRA
EDW
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
21
Internal OB van
Description
Part number
Description
MFP.3K.93C.AM025NS
25 meter length
MMP.3K.93C.AM003NS
3 meter length
MFP.3K.93C.AM050NS
50 meter length
MMP.3K.93C.AM005NS
5 meter length
MFP.3K.93C.AM100NS
MMP.3K.93C.AM010NS
10 meter length
MFP.3K.93C.AM200NS
MMP.3K.93C.AM015NS
15 meter length
MFP.3K.93C.AM300NS
MMP.3K.93C.AM020NS
20 meter length
MFP.3K.93C.AM400NS
MFP.3K.93C.AM500NS
Studio/Infrastructure
Part number
Description
MME.3K.93C.AM020NS
20 meter length
MME.3K.93C.AM050NS
50 meter length
Internal OB van
Description
Part number
Description
MFP.3K.93C.AM025NA
25 meter length
MMP.3K.93C.AM003NA
3 meter length
MFP.3K.93C.AM050NA
50 meter length
MMP.3K.93C.AM005NA
5 meter length
MFP.3K.93C.AM100NA
MMP.3K.93C.AM010NA
10 meter length
MFP.3K.93C.AM200NA
MMP.3K.93C.AM015NA
15 meter length
MFP.3K.93C.AM300NA
MMP.3K.93C.AM020NA
20 meter length
MFP.3K.93C.AM400NA
MFP.3K.93C.AM500NA
Studio/Infrastructure
Part number
Description
MME.3K.93C.AM020NA
20 meter length
MME.3K.93C.AM050NA
50 meter length
Other cable assemblies, patch cords and pig tails available on request.
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
22
www.lemo.com
MEERKATTM HD converter
A compact solution for Sony SD, Grass Valley (Thomson ) SD/HD camera based systems
The LEMO MEERKAT Triax media converter system provides the solution the broadcast industry has been waiting for.
This compact plug and play transmission system provides a fibre link between Triax cameras and OB vans.
The LEMO Media Converter offers mobile facility providers, production centres and broadcast studios an appropriate and
professional solution for long distance signal transmission.
MEERKAT (A)
POWERKAT * optional
1m - TRIAX
MEERKAT (B)
2 km - SMPTE 311 cable **
1m - TRIAX
* No local power required when using the MEERKAT
with the POWERKAT.
** For Grass Valley systems : 1 km - SMPTE 311 cable
12 V - 1.5 A max
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
23
Technical characteristics
Input/outputs
Connectors
Signals
Values
I/O ports
Triaxial connector 75 1)
Optical RX sensitivity
-3 dB to -21 dB
DC in
Data rate
2x2.5 GB/s
Optical Tx output
Transmission wavelength
1310 nm / 1550 nm
General
Values
Dimensions
Mass (approx.)
2 kg
Supplied accessories
Quantity
Power
requirements 2)
Fuse
Power
requirements 3)
Power consumption
16 W
Users guide
Operating voltage
Operating temperature
-20C to +55C
Humidity
up to +95%
Index protection
Note:
1) LEMO
3K.93C series (HDTV). 2) In North America, Japan and areas of South America. 3) In Europe, Africa, Australia, Scandinavia, China.
Type
Triax
camera
adaptor
Part Nr
Part Nr
Type
HD
LDK 5630
LDK 4580
HD
SONY
HD
SONY
Camera
Manufacturer
Part Nr
Grass ValleyTM
LDK 3000
Type
Triax
camera
adaptor
Part Nr
Part Nr
Type
BVP-E30
SD
CA590
CCU-790
SD
BVP550
SD
CA550
CU-550
SD
CA570
CCU-700
SD
Camera
Manufacturer
Part Nr
Base station
Grass
ValleyTM
Grass
ValleyTM
LDK 4000
HD
LDK 5860
LDK 4506
HD
SONY
BVP950
SD
Grass ValleyTM
LDK 6000
HD
LDK 5460
LDK 4502
HD
SONY
BVP700
SD
CCU-700
Grass ValleyTM
LDK 6200
HD
LDK 5462
LDK 4506
HD
SONY
BVP750
SD
CCU-700
Grass ValleyTM
LDK 8000
HD
LDK 5860
LDK 4502
HD
SONY
CCU-750
Grass ValleyTM
HD
LDK 5860
LDK 4506
HD
SONY
CCU-500
LDK 4000
HD
LDK 5460
LDK 4502
Grass ValleyTM
LDK20s
SD
LDK5400
LDK4053
SD
Grass
ValleyTM
LDK20s
SD
LDK5430
LDK4501
SD
Grass
ValleyTM
LDK100
SD
LDK5400
LDK4053
SD
Grass
ValleyTM
LDK200
SD
LDK5430
LDK4501
SD
Grass
ValleyTM
LDK300
SD
LDK5400
Grass
ValleyTM
LDK300
SD
LDK5430 LDK4501SL
SD
Grass ValleyTM
LDK400
SD
LDK5400
SD
Grass ValleyTM
LDK400
SD
LDK5430 LDK4501SL
SD
Grass ValleyTM
LDK500
SD
LDK5400
SD
Grass ValleyTM
LDK500
SD
LDK5430 LDK4501SL
SD
SD
Notes : Do not connect any camera other than those on the list above
without contacting the LEMO Technical Support Group.
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
24
www.lemo.com
MEERKAT (A)
1m - TRIAX
Local power
20 km - 2 x SC
or 2 x FC/PC optic cable
Maximum transmission distance
determined by the camera system
power budget
MEERKAT (B)
1m - COAX/TRIAX
12 V - 1.5 A max
LEMO
triax connector
on the camera
Electrical triax
connector on cable
LEMO
triax connector
on the CCU
Electrical triax
connector on cable
Socket 4M.650
PHW.MT.3.TFRP10
FGG.4M.650.CTLC90
Plug 4M.650
FGW.MT.3.TPRP10
PHG.4M.650.CTAC90
Plug 4M.650
PHW.MT.3.TPRP10
PHG.4M.650.CTAC90
Socket 4M.650
FGW.MT.3.TFRP10
FGG.4M.650.CTLC90
Socket 4E.675
PHW.MT.3.TFUP10
FFA.4E.675.CTAC90
Plug 4E.675
FGW.MT.3.TPUP10
PCA.4E.675.CTLC90
Plug 4E.675
PHW.MT.3.TPUP10
PCA.4E.675.CTLC90
Socket 4E.675
FGW.MT.3.TFUP10
FFA.4E.675.CTAC90
Socket 4A.675
PHW.MT.3.TFVP10
FXB.4A.675.CTCC85
Plug 4A.675
FGW.MT.3.TPVP10
PXA.4A.675.CTRC85
Plug 4A.675
PHW.MT.3.TPVP10
PXA.4A.675.CTRC85
Socket 4A.675
FGW.MT.3.TFVP10
FXB.4A.675.CTCC85
Socket REDEL F
PHW.MT.3.TFWP10
FAZ.T7.675.CTA02C
Plug REDEL F
FGW.MT.3.TPWP10
PCZ.T7.675.CTL02C
Socket 3T.675
PHW.MT.3.TFTP10
FFA.3T.675.CTAY92S
Plug 3T.675
FGW.MT.3.TPTP10
PCA.3T.675.CTLY92S
Camera system
KC
TH
Cable camera to
MEERKATTM (A)
Type
MAP.MC.TAA.MM012G 4A series
MAF.MC.TRA.AM012G
Cable CCU to
MEERKATTM (B)
MEERKAT (A)
MEERKAT (B)
MAM.MC.TAA.CM012G
REDEL T7
MAR.MC.TRA.AM012G
MAC.MC.TMA.AM012G 4M series
MAG.MC.TMA.LM012G
MAL.MC.TEA.LM012G
4E series
MAA.MC.TEA.AM012G
MAA.MC.TTA.AM012G
3T series
MAC.MC.TTA.LM012G
Additional triax cables can be ordered for specific cameras. One set of cable comes with fully working MEERKAT System.
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
25
Accessories
EDW POWERKAT
EDW.MT.126.TE3K
GSF.MT.283.DZZ
It retrieves the power directly from the CCU and allows powering both
the camera and HD MEERKAT directly from the SMPTE cable. Delivered
with 1 meter cable to HD MEERKAT (PUW-FUW).
The tripod clamp allows the camera operator to fix the HD MEERKAT to
the camera tripod.
WST.MT.170.TZZ
Belt: WSK.MT.285.PN
The hang up strap kit allows the camera operator to easily hang up the HD
MEERKAT while shooting. (Strap length: 0.25 m).
The belt carrier allows the cameraman to carry the MEERKAT or the
POWERKAT on the hip. Simply slide the belt throught two buckles.
Buckles: WSK.MT.284.RT
MGY.0K.302.YAM020N
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
26
www.lemo.com
SERBALTM converter
SERBAL TM - SMPTE Electrical Reconfigurable Bidirectional Alternative Link
The LEMO SERBAL TM is a 4 channel multiplexer that makes HD/SDI to fibre conversion possible. The SERBAL TM provides a compact conversion unit which allows output from up to 4 cameras to be transmitted over a single standard LEMO
3K.93C SMPTE cable.
The optical multiplexers of the SERBAL TM use Wavelength Division Multiplexing (WDM). Each signal within a fibre has
a different optical wave length, enabling interference free transmission over longer distance.
The system is available in three versions : it can send 4x HD/SDI signals from the cameras to the OB van using one
SMPTE cable. The second version can send 2x HD/SDI signals from the cameras to the OB van, while using the remaining 2 signals for monitor feedback. If only one monitor feedback is required, the third version can send up to 3 camera signals to the OB van.
Applications
Golf, skiing, auto racing, olympic games
Pre-fibred venues
Stadiums, racing tracks
Advantages
Plug & play solution
High quality signal transmitted over fibre
Compact
Features
Converts from Coaxial BNC input to transmission over
standard 3K.93C cable assemblies
Multiple transmission options available
- 4 x Tx
- 2 x Tx + 2 x Rx
- 3 x Tx + 1 x Rx
Audio/Data :
passes pre-embedded Audio
Supports all NRZI data formats from 10 Mb/s to
1.5 Gb/s
Signal format :
HD/SDI SMPTE 292 M, SDI, DVB-ASI,
19.4 Mb/s SMPTE 310,
142-540 Mb/s SMPTE 259 M, SDTI.
CAMERA SIDE
CCU SIDE
SERBAL
HD/SDI
COAX
SERBAL
HD/SDI
FIBRE
COAX
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
27
Broadcast setup
Camera side
Broadcast setup
CCU side
SERBALTM
Part number
SERBALTM
Part number
4 cameras
PHW.MS.3C4.TPBCC
4 Rx signals
FGW.MS.3C4.TPBCM
2 cameras / 2 monitors
PHW.MS.3C2.TPBCC
2 Rx signals + 2 Tx signals
FGW.MS.3C2.TPBCM
3 cameras / 1 monitor
PHW.MS.3C3.TPBCC
3 Rx signals + 1 Tx signals
FGW.MS.3C3.TPBCM
Note: Every coax-to-fibre Media Converter comes with power supply (110V/220V) adapter.
Technical characteristics
Characteristics
Characteristics
Values
Values
Weight / dimension
2 kg / 172 x 125 x 50 mm
- 4.5 dB @ 1550 nm
Transmission wavelength
1310 nm / 1550 nm
- 30 dB @ 1310 nm
Cable (hybrid)
SMPTE 311
- 30 dB @ 1550 nm
Fibre type
Single mode
Optical connector
Temperature range
-30C to +55C
BNC 75
Humidity range
Up to 95%
- 6 dB @ 1310 nm
Input voltage
Coaxial HD/SDI
SMPTE cable
Fibre optic
Camera 1
Coaxial HD/SDI
OB van
Camera 2
SERBAL
SERBAL
4 x Tx signal
4 x Rx signal
Camera 3
Camera 4
Coaxial HD/SDI
SMPTE cable
Fibre optic
Camera 1
Coaxial HD/SDI
OB van
2 x Rx signal
2 x Tx signal
Camera 2
Feedback
monitor 1
Feedback
monitor 2
SERBAL
SERBAL
2 x Tx signal
2 x Rx signal
Coaxial HD/SDI
SMPTE cable
Fibre optic
Camera 1
Coaxial HD/SDI
OB van
2 x Rx signal
2 x Tx signal
Camera 2
SERBAL
SERBAL
Camera 3
1 x Tx signal
1 x Rx signal
Feedback
monitor 1
1 x Rx signal
1 x Tx signal
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
28
www.lemo.com
SHACKTM converter
SHACKTM - SMPTE conversion device for singlemode fibre (SC, ST, FC or LC)
The SHACKTM is a conversion system from SMPTE connectors/cable to standard singlemode connectors. The system
provides a transition from optical communication over hybrid (copper and fibre) cables to optical communication over commonly available singlemode fibre optic cables. The SHACKTM permits the camera to be locally powered while allowing the
optical signals to be transmitted.
It is a lightweight and very compact solution for stadiums, sports arenas or outside broadcast applications.
Applications
Golf, skiing, auto racing, olympic games
Pre-fibred venues
Stadiums, racing tracks
Advantages
Plug & play solution
High quality signal transmitted over fibre
Compact
Uses inexpensive SC, ST, FC or LC connectors
Camera brand independant
Features
Converts from SMPTE 304 connectors to standard
duplex fibre optic cable assemblies
Plugs directly into camera/base station
FGW SHACK
PHW SHACK
2 x SC / 2 x ST / 2 x FC / 2 x LC
Singlemode cable
SMPTE 304
Local
power
EDW.3K.93C
SMPTE 304
FXW.3K.93C
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
29
Technical characteristics
Characteristics
Values
Characteristics
Values
Fibre type
Singlemode
Electrical
1)
Hybrid connector
Laser safety
2)
Humidity range
Up to 95%
Temperature range
-20C to +60C
Warranty
5 years
15 V to 360 V
Return loss
45 dB per unit
EMI/RFI
Note:
1) Complies
with EN 61000-6-1, EN61000-6-2. 2) Complies with Class 1 laser product 24 CFR 1040.10 & 1040.11.
39
124
Part number
Singlemode
fibre connector
Note
FGW.3K.93C.CLMSC
SC
FGW.3K.93C.CLMST
ST
FGW.3K.93C.CLMFC
FC
FGW.3K.93C.CLMLC
LC
Part number
Singlemode
fibre connector
Note
PHW.3K.93C.CLCSC
SC
PHW.3K.93C.CLCST
ST
PHW.3K.93C.CLCFC
FC
PHW.3K.93C.CLCLC
LC
Standard
Upon request
39
136
Standard
Upon request
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
30
www.lemo.com
Features
Converts from SMPTE 304 connectors to a single
multiway fibre optic cable
Plugs directly into camera/base station via cable
Allows connection of up to 6 cameras
Redundant power supply
Advantages
Plug & play solution
One multiway cable is cheaper than multiple SMPTE
311 hybrid cables
The 6 cameras can be powered without additional
mains / DC leads to every camera
MULTISHACK 3XTM
MULTISHACK 6XTM
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
31
Values
Characteristics
Values
Fibre type
Singlemode
Electrical
1)
Hybrid connector
LEMO3K.93C series
Laser safety
2)
Multifibre connector
LEMO 4K series
Humidity range
Up to 95%
Temperature range
-20C to +60C
Warranty
5 years
15 V to 360 V
Return loss
EMI/RFI
Note:
1) Complies
with EN 61000-6-1, EN61000-6-2. 2) Complies with Class 1 laser product 24 CFR 1040.10 & 1040.11.
Part number
PXG.MX.C31.AT
PHD.MX.V13.AT
PHT.MX.R13.AT
PTG.MX.R31.AT
PHC.MX.R13.AT
PCG.MX.R31.AT
Manufacturer
Description
No
Grass Valley
TM
Grass Valley
TM
Grass Valley
TM
Grass Valley
TM
CAMERA SIDE
TM
TM
CCU SIDE
CCU SIDE
SMPTE 304
EDW
Mains power *
FXW
FXG
EGG
4
SMPTE 304
EDW
(3x)
EGG
Mains power *
SMPTE 304
FGG
FXG
PHG
up to 10 km
distance
3 SC/ST
fan out
patch cord
3
FXG
PHG
* Mains power with automatic transfer switch (redundant mains input) to suit camera type 240Vac or 110Vac (IEC 60309)
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
32
www.lemo.com
Values
Characteristics
Values
Fibre type
Singlemode
Electrical
1)
Hybrid connector
LEMO3K.93C series
Laser safety
2)
Multifibre connector
LEMO 5K series
Humidity range
Up to 95%
Temperature range
-20C to +60C
Warranty
5 years
15 V to 360 V
Return loss
EMI/RFI
Note:
1) Complies
with EN 61000-6-1, EN61000-6-2. 2) Complies with Class 1 laser product 24 CFR 1040.10 & 1040.11.
Part number
Manufacturer
Description
No
PXE.MX.C61.AS
SONY (blue)
PFD.MX.V16.AS
SONY
(blue)
CCU end/for
PFT.MX.R16.AS
SONY
(blue)
PTE.MX.R61.AS
SONY
(blue)
PFC.MX.R16.AS
SONY
(blue)
PCE.MX.R61.AS
SONY
(blue)
Sony
CAMERA SIDE
1
2
CCU SIDE
CCU SIDE
SMPTE 304
EDW
Mains power *
FXG
FXW
EGG
4
SMPTE 304
EDW
(6x)
up to 10 km
distance
6 SC/ST
fan out
patch cord
2
3
EGG
FXG
Mains power *
SMPTE 304
PHG
FGG
FXG
PHG
* Mains power with automatic transfer switch (redundant mains input) to suit camera type 240Vac or 110Vac (IEC 60309)
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
33
HD Z-Link
Camera side
FUW.3K.93C
PUW.3K.93C
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
34
www.lemo.com
Part number
Description
Part number
Description
CHD.MZ.3KC.NVVF
RHD.MZ.3KC.NZZB
RHD.MZ.3KC.NZZF
PHD.MZ.3KC.NVVZ
CHD.MZ.3KC.NVVB
THD.MZ.3KC.NZZZ
HD Z-Link
with all options
Basic
HD Z-Link
Analogue video
Two-channel intercom
Multisystem intercom
Ethernet port
1)
Description
Note:
1) not
3G 1080P.
DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the
information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.
www.lemo.com
35
LEMO HEADQUARTERS
SWITZERLAND
LEMO SA
Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens
Tel. (+41 21) 695 16 00 - Fax (+41 21) 695 16 02 - e-mail: info@lemo.com
SUBSIDIARIES
AUSTRIA
LEMO Elektronik GesmbH
Lembckgasse 49/E6-3
1230 Wien
Tel: (+43 1) 914 23 20 0
Fax:(+43 1) 914 23 20 11
sales@lemo.at
JAPAN
LEMO Japan Ltd
2-7-22, Mita,
Minato-ku, Tokyo, 108-0073
Tel: (+81 3) 54 46 55 10
Fax: (+81 3) 54 46 55 11
lemoinfo@lemo.co.jp
BRAZIL
LEMO Latin America Ltda
Av. Jos Rocha Bonfim,
214 Salas 224 / 225
Condomnio Praa Capital
Ed. Chicago
Campinas / SP - Brasil 13080-650
Tel: +55 (11) 98689 4736
info-la@lemo.com
NETHERLANDS / BELGIUM
LEMO Connectors Benelux
De Trompet 1060
1967 DA Heemskerk
Tel. (+31) 251 25 78 20
Fax (+31) 251 25 78 21
info@lemo.nl
CANADA
LEMO Canada Inc
44 East Beaver Creek Road, unit 20
Richmond Hill, Ontario L4B 1G8
Tel: (+1 905) 889 56 78
Fax: (+1 905) 889 49 70
info-canada@lemo.com
CHINA / HONG KONG
LEMO Electronics (Shanghai) Co., Ltd
First Floor, Block E,
18 Jindian Road, Pudong
Shanghai, China, 201206
Tel: (+86 21) 5899 7721
Fax: (+86 21) 5899 7727
cn.sales@lemo.com
DENMARK
LEMO Denmark A/S
Gammel Mosevej 46
2820 Gentofte
Tel: (+45) 45 20 44 00
Fax: (+45) 45 20 44 01
info-dk@lemo.com
FRANCE
LEMO France Srl
24/28 Avenue Graham Bell
Btiment Balthus 4
Bussy Saint Georges
77607 Marne la Valle Cedex 3
Tel: (+33 1) 60 94 60 94
Fax: (+33 1) 60 94 60 90
info-fr@lemo.com
GERMANY
LEMO Elektronik GmbH
Hanns-Schwindt-Str. 6
81829 Mnchen
Tel: (+49 89) 42 77 03
Fax: (+49 89) 420 21 92
info@lemo.de
HUNGARY
REDEL Elektronika Kft
Nagysndor Jzsef u. 6-12
1201 Budapest
Tel: (+36 1) 421 47 10
Fax: (+36 1) 421 47 57
info-hu@lemo.com
ITALY
LEMO Italia srl
Viale Lunigiana 25
20125 Milano
Tel: (+39 02) 66 71 10 46
Fax: (+39 02) 66 71 10 66
sales.it@lemo.com
LEMO
NORWAY / ICELAND
LEMO Norway A/S
Stanseveien 6B
0975 Oslo
Tel: (+47) 22 91 70 40
Fax: (+47) 22 91 70 41
info-no@lemo.com
SINGAPORE
LEMO Asia Pte Ltd
4 Leng Kee Road,
#06-09 SiS Building
Singapore 159088
Tel: (+65) 6476 0672
Fax: (+65) 6474 0672
sg.sales@lemo.com
SPAIN / PORTUGAL
IBERLEMO SAU
Brasil, 45, 08402 Granollers
Barcelona
Tel: (+34 93) 860 44 20
Fax: (+34 93) 879 10 77
info-es@lemo.com
SWEDEN / FINLAND
LEMO Nordic AB
Mariehllsvgen 39A
168 65 Bromma
Tel: (+46 8) 635 60 60
Fax: (+46 8) 635 60 61
info-se@lemo.com
SWITZERLAND
LEMO Verkauf AG
Grundstrasse 22 B
6343 Rotkreuz
Tel: (+41 41) 790 49 40
Fax: (+41 41) 790 49 43
ch.sales@lemo.com
UNITED KINGDOM
LEMO UK Ltd
12-20 North Street
Worthing, West Sussex,
BN11 1DU
Tel: (+44 1903) 23 45 43
Fax: (+44 1903) 20 62 31
lemouk@lemo.com
USA
LEMO USA Inc
P.O. Box 2408
Rohnert Park, CA 94927-2408
Tel: (+1 707) 578 88 11
(+1 800) 444 53 66
Fax:(+1 707) 578 08 69
info-US@lemo.com
DISTRIBUTORS
www.lemo.com
LEMO