Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Codes
Courtesy of Skidsmadawg96
Click here for details on how to get the codes if the following
instructions don't work!
(1) Cycle the ignition key On - Off - On - Off On within 5 seconds.
(2) The Odometer will show the P-code.
(3) If no DTCs are present, the cluster will display one of two texts:
P1684 and done or only done. P1684 indicates that the memory
has been cleared within the last 50 ignition cycles and does not indicate
a problem. Done indicates that NO DTCs are present.
Ho2S = heated oxyen sensor, TP = throttle position, MAF = mass
airflow, MAP = manifold absolute pressure, TC=turbocharger.
Some codes might not be used by Chrysler, or might only be used by
some later Chrysler models (e.g. Charger). These will be italicized.
P1508 Idle Speed Low - Idle Air Control (IAC) System Not
Responding
P1509 Idle Speed High - Idle Air Control (IAC) System Not
Responding
P1528 Governor
P1670 Driver 4
P1680 Driver 5
P1865 4-5 Shift Solenoid (SS) Valve Control Circuit High Voltage