Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
LOGICAL PROBING.
POINT TO REMEMBER BEFORE INSTALLATION OF PRINTER
SOFTWARE.
INSTALLATION ERROR MESSAGES.
CONNECTIVITY.
SCANNING ISSUES IN VISTA.
MANUFACTURERS CHAT SUPPORT LINKS.
MANUFACTURERS KNOWLEDGE BASE.
LOGICAL PROBING
- Please check the USB cable in case of direct connection with computer- If he/she is using the
USB cable that came with the printer or purchased a different one.
- If it’s an AIO (all in one) try to make a copy in-order to check the hardware.
Is the printer connected directly to the wall outlet or surge protector * In case the scanner
is not working or no power situation.
- Make sure the connection is correct with the USB at the tower/port.
− When was last time the printer cartridges were replaced (In case the print quality is bad?)
− Was the cartridges replaced or refilled.
− Please check the kind of paper.
- In vista most of the printers are plug and play- it will install the drivers automatically.
However, if the customer will try to use the button on the machine to scan it will not work,
because the buttons are linked with the machine by the Printer software. In that cases we
need to install the complete software from the manufactures website. (If available)
- Make sure the length of the USB cable should not be more than 6 feet or it will give us
communication error while scanning.
POINT TO REMEMBER BEFORE INSTALLATION OF PRINTER
SOFTWARE.
- While installing the printer software make sure that the USB cable is not connected. We need
to connect it once we get the prompt to connect the device.
- If you get any error message while installing the software please check on the manufactures
website for compatibility issues with windows customer is using.
- In cases we are getting errors for Installer and print spooler- Please check the status of the
services in services.msc
- In case print spooler error you should also check the lexbec service and also its
dependencies.
- There can be a scenario when it will give us error that higher version of the software is
already installed (This happens only in case when the user has more than one printer)
- In cases where in the computer and the printer is very old and we don’t have the
drivers. Please, follow the steps.
Go to Control Panel- Printers- Add a printer- Wizard will come up- we need to choose Local
printer (Uncheck the option for automatically detect printer)- Choose the printer port
accordingly ( In case of USB –choose USB and in LPT- choose- LPT)- Choose HP as
manufacturer and DeskJet (990 C) as product, be it be any printer( I will pick the drivers which
are windows default drivers)
− If the software was already installed and we need to un-install it. Please, go to the
manufactures website and try to look for the un-installer.
− You will also fine the uninstall utility with HP printer in the software disk.
Explore the disk- open UTIL- open CCC- you will find batch file by the name of Uninstall
L1, L2, L3, L4- Double click to run these file- It will remove the entries from the registry also.
INSTALLATION ERROR MESSAGES.
If the drivers are already installed then follow the printer communication failure guide
If the drivers are not installed then follow the below mentioned steps
STEP: Make Sure That the Computer Operating System Is Compatible With the Printer
1. Click Start, click Run, type command, and then click OK to display the command.com
window.
2. Type net stop spooler, then press <Enter>.
3. Type sc config spooler depend= RPCSS start= Auto, then press <Enter>. The spaces
between = and RPCSS and = and Auto are important. Without these spaces, the
command fails.
4. Type net start spooler, then press <Enter>.
STEP: Ensure the print spooler and dlci device services are started
1. To enable the dlci_device and print spooler services, perform the following steps :
2. Click the Start button, and then click Run.
3. The Run window appears.
4. Type services.msc, and then click OK.
5. Locate dlci_device in the list of services, right-click the service, and then left-click
Start.
6. Locate Print Spooler in the list of services, right-click the service, and then left-click
Start.
1. Verify the AC power cord is securely plugged into both the printer and a working AC
outlet.
2. Bypass any power strip, Uninterruptible Power Supply (UPS), or surge protector.
Reseat both ends of the cable connecting the printer to the computer or network jack, such as
a parallel, USB, or network cable.
Remove any devices between the printer and the computer, including the following:
o Scanner
o External Storage Device
o Switchbox
o USB Hub
1. Click Start, click All Programs, then click the AIO Printers menu option.
2. Click the Printers folder and click AIO Printer Software Uninstall.
3. Follow the directions on the screen to complete the uninstall.
4. Click Start, click Control Panel.
5. Double-click the Add/Remove Programs or Uninstall a program link.
6. Remove any listings for the printer.
7. Close the Add/Remove Programs window.
8. Click Start.
12. Click the View menu and click to choose the Show Hidden menu option.
13. Click the plus (+) sign to the left of Printers, then right-click each item and left-click
Uninstall.
STEP: Install the Printer Drivers either by using the printer CD or by downloading the latest
drivers from the manufactures website.
STEP: Confirm That the USB Port Is Enabled in the System Setup (BIOS)
If it still not work with good/ new USB printer cable then
Open Device manager and Look through the device tree for conflicting or unknown
devices. Conflicting devices are usually denoted by an exclamation point (!). Unknown
devices are usually denoted by a question mark (?).
STEP: Disconnect the USB cable and see if errors or unknown devices go away
STEP: Download and Install the Latest Printer drivers from the manufactures website
STEP: Check the Power Settings for the USB Root Hubs to See if the Printer is Detected
STEP: Download and Install the Latest Printer drivers from the manufactures website
STEP: Check the Power Settings for the USB Root Hubs to see if the Printer is detected
The printer driver did not install and the printer was detected
STEP: Download and Install the Latest Printer drivers from the manufactures website
For any other specific installation error message, we need to go to the manufactures website
and search in the KB.
www.hp.com
www.dell.com
www.epson.com
www.brother.com
www.canon.com
www.lexmark.com
CONNECTIVITY.
- Direct Connection
- Wired Network
- Wireless Connection
Direct Connection
- Make sure customer is connecting the printer at the back of the tower, because some AIO will
not scan if connected in the front. "We will get message that device could work better if
connected to USB 2.0"
- If the device is not getting detected, checked the status of the device in device manager.
- If the device is not getting detected, try to check for any spare USB cable if available.
- If the device is not getting detected, try to connect any other USB device to check the
functionality of the USB port on computer.
-In vista most of the printers are plug and play- it will install the drivers automatically.
- Now a days we have monitors with USB port on them, make sure customer is not connecting
the printer on the monitor (I have seen the same case recently)
- Wired Network
- In case of wired network we need to make sure that we have proper communication with the
computer.
- We need to get the IP address of the printer and try to ping it, if the printer is already
installed and was working you can check the port and will get the IP address. Other wise
please check the section with Quick Tips *.
Make sure that printer is connected to one computer at least directly. Ping both the
computers- success (If not we need to troubleshoot network first)
-Success- Go to Control panel- Printers- Right Click on the printer icon- Make it shared.
- On the second computer- Go to RUN- \\0.0.0.0 ( IP of the computer on which printer is directly
connected)
- When you right click you will get the option Connect.
- It will automatically detect the default drivers.
- Set it as the default printer.
-Please do check for any firewall and antivirus which can block the incoming network session.
- Wireless Connection
- In case of wireless network, first thing we need to check is the Firewall and any blocking
software.
- While installation, it will prompt how you want to connect device and you need to choose
“Through the network”- it will automatically search for the wireless printer-
- If No- it will ask for the IP- How to find the IP look the section Quick Tips*
-SCANNING ISSUES IN VISTA
- There are some printer which do not have software compatible with Vista- In that case if the
customer will try to use the scan button it will not work- You need to educate the customer
that as the software is not available for the particular model. they need to use the computer in
order to scan -The best option for scanning in vista is using windows Photo gallery
Open Windows Photo gallery- Click on File- Choose Import from camera and scanner- It will
show you the scanner- Select it and click on Import- It will ask you what are you scanning and
other quality options- click on preview, it will show you the preview and then click on scan -
Once it scans, it will provide you the save option* that you can change* - By default we have
the My Scans folder in which the scans are saved.
Following are the Chat support, links if you need to get some specific details of error.
http://support.dell.com/support/topics/global.aspx/support/chat/hardware_chat?
c=us&l=en&s=gen&~ck=gp&~ck=gp - Dell chat support
1) While installing HP printer once it moves on to the License agreement screen and it is taking
long time- Go to Task manger –process- end the process WRAPPER.EXE, it will directly move on
to the screen which says connect your hardware.
3) In case IP address is not coming- we have an option in Setup/Menu – Network- to run the
wireless setup wizard- which will automatically bring the IP address.
4) If you are unable to scan the document as it gives error for Scan.msi missing following the
steps.
http://forums12.itrc.hp.com/service/forums/bizsupport/questionanswer.do?
admit=109447627+1224034854869+28353475&threadId=1014990
After deciding it was a registry problem, I went into regedit, searched for SCAN.MSI. Found a
key under HKLM/software/classes/installer/products and deleted the entire entry. Scanner
works now, Warning, deleting things out of the registry can be harmful to your computer, this
worked for me and MAY work for you, but I offer now warranty for the results
************Make sure you take the backup of registry and delete the entries only for
Scanner***********
5) If you are able to print but unable to copy- check any message on LCD on machine- if it says
scanner failure- it means scanner bulb needs to be replaced.
PLEASE CHECK THE MANUFACTURES WEBSITE FOR ANY SPECIFIC ERROR MESSAGES AND
MANAULS OF THE SPECIFIC PRINTER.