Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
You can have this USB Endoscope to reach the place that you cannot reach but
you still need to.
with 6 LEDs around the end of the endoscope, so you still can see in a dark
environment.
With the switch to control the ON/OFF of the LED (the LED can light up
gradually up to your control).
You can bend it to see around a corner or to look directly at a feature in a bore.
Driverless for Windows 2000, XP / Vista (see notes below).
Specifications:
Resolution: 640*480
Interface: USB2.0
1 13
2 13
For saving the pictures,press CTRL+S,the pictures will stored in the pictures
favorites.
3 13
Popup dialog box as follows: set file save file name and location, click on open to
preserve;
Popup dialog box as follows: set up the capture file size,click confirm;
4 13
Set up the time limit: Click on the capture drop-down menu select set time limit,then
pop up dialog box(see below picture).set up the time limit press ok.
Click on " Capture" drop-down menu select"start capture"; see below capture (or
click
)
5 13
Pop up below dialog box, click confirm start the capture,To set a time limit will
automatically stop, and stored in a designated location.
6 13
7 13
Popup dialog box as follows: set file save file name and location, click on open to
preserve;
Popup dialog box as follows: set up the capture file size,click confirm;
8 13
Set up the time limit: Click on the capture drop-down menu select set time limit,then
popup dialog box(see below picture).set up the time limit press ok.
Pop up below dialog box: Use Time Limit select,set capture time limit,then click
OK.
9 13
Pop up below dialog box Ready to Capture click OK start capture it will
automatically stop, and stored in a designated location.
10 13
If have not set up time limit,you can click ' Capture ' drop-down menu selectStop
Capture
On Windows XP system, you can see the picture from ' My computer '
Video equipment '.
' USB
Fault detection:
It can not see the picture when endoscope connect with the computer.
1,Check the hardware connection status.
Connect the endoscope with the computer,right click ' My Computer ' ,
drop-down menu select ' manage ' ;
Windows 7
11 13
Windows XP
and
If still can not workplease check whether the USB port is ok or not;
12 13
13 13