Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
131
23
Dia. In Inches. =
=L
=D
Dia. In Ft. =
Nitrogen Volume
Required
Volume of Gas @
58
1,868
PSIG:
1.917
T Cyl.s
6.3
CF
The Nitrogen volumes shown are for pressurizing a pipe to the selected pressure only. Additional Nitrogen would be required for any additional purging or volume changes. See below
for purging calculations. It is always recommended to have additional Nitrogen available to compensate for any leaks or un-foreseen requirements.
131
=L
=D
Nitrogen Volume
Required
371
CF
1,114
CF
2,599
CF
1,856
CF
Purging
Data
Diameter In Ft. =
1.0% O2 Bal.
.02% O2 Bal.
.14% O2 Bal.
3
7
5
3.7
8.5
6.1
Purging does not require pressurization. The results shown are for the number of 'T' cylinders to provide the appropriate number of volume changes at very low flow with no
pressurization. Note: NEVER enter a vessel that has been purged with Nitrogen, or any other gas unless you have tested that atmosphere for proper levels of oxygen.
Pressure
Testing
Data
25
PSIG:
1,003
CF
High Pressure
Cylinders Required
T Cyl.s
3.3
www.weldspecialty.com
Page 1 of 2
Printed: 04/26/2016
Length In Ft. =
12
Width In Ft. =
Nitrogen Volume
Required
360
CF
Purging
Data
Height In Ft. =
1,080
2,520
CF
1.0% O2 Bal.
CF
.02% O2 Bal.
3
7
1,800
CF
.14% O2 Bal.
3.6
8.3
5.9
Purging does not require pressurization. The results shown are for the number of 'T' cylinders to provide the appropriate number of volume changes at very low flow with no
pressurization. Note: NEVER enter a vessel that has been purged with Nitrogen, or any other gas unless you have tested that atmosphere for proper levels of oxygen.
50
Pressure
Testing
Data
PSIG:
1,584
CF
High Pressure
Cylinders Required
T Cyl.s
5.3
** This information is used to determine volumes of N2 requirements for purging pipelines and vessels, and is not intended to
replace proper monitoring of oxygen levels with proper equipment.
www.weldspecialty.com
Page 2 of 2