Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Router>enable
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#
Router(config)#hostname R1
R1(config)#no ip domain-lookup
R1(config)#enable secret class
R1(config)#line console 0
R1(config-line)#password cisco
R1(config-line)#login
R1(config-line)#exit
R1(config)#line vty 0 4
R1(config-line)#password cisco
R1(config-line)#login
R1(config-line)#exit
R1(config)#exit
R1#
%SYS-5-CONFIG_I: Configured from console by console
R1#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
R1#running-config
Translating "running-config"
% Unknown command or computer name, or unable to find computer address
R1#
R1#
R1#
R1#show running-config
Building configuration...
Current configuration : 852 bytes
!
version 15.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname R1
!
!
!
enable secret 5 $1$mERr$9cTjUIEqNGurQiFU.ZeCi1
!
!
!
!
!
!
no ip cef
no ipv6 cef
!
!
!
R1#
R1#
R1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#interface serial 0/0/1
R1(config-if)#ip address 10.1.1.1 255.255.255.252
R1(config-if)#no sh
%LINK-5-CHANGED: Interface Serial0/0/1, changed state to down
R1(config-if)#
R1(config-if)#exit
R1(config)#interface g0/1
R1(config-if)#ip address 192.168.0.1 255.255.255.0
R1(config-if)#no sh
R1(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed stat
e to up
R1(config-if)#exit
R1(config)#
%LINK-5-CHANGED: Interface Serial0/0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1, changed state to up