Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
| No.2
1) Casting
(1 Required - Cast Steel)
PED| Alexandria University | Dr. Mohamed Nassef
3) Screw
(1 Required - Mild Steel)
| No.3
5) Washer
(1 Required - Mild Steel)
2) Nut
(1 Required - Gun Material)
7) Tommy bar
(1 Required - Mild
Steel)
4) Cup
(1 Required - Cast Steel)
6) Set Screw
(1 Required- Mild Steel)
| No.4
Handle
Screw
Nut
Casting
Base
| No.5
| No.6
| No.7
| No.8
Exercise 2
The following figures show the detailed components
of a Non Return Valve. The parts are fitted in the
following sequence:
1) The valve (Item 3) and valve stop (Item 2) are
assembled to the body (Item 1).
2) The gland bush (Item 5) with the spindle (Item 6)
passing through it is fitted to the body.
3) The gland (Item 4) is screwed into the gland bush
and adjusted to prevent any fluid leakage via the
spindle.
| No.9
| No.10
| No.11
| No.12
| No.13
| No.14
| No.15
| No.16
Spindle
Gland
Bush
+
Bush
| No.17
Exercise 3
Draw with a scale of 1:2 in first angle projection an
assembly drawing comprising the following views:
| No.18
(1) Body
(Ductile Iron 1 Required)
PED| Alexandria University | Dr. Mohamed Nassef
| No.19
(2) Barrel
(Cast Alloy Steel 1 Required)
(6) Centre
(Cast Alloy Steel 1 Required)
PED| Alexandria University | Dr. Mohamed Nassef
| No.20
(3) Cap
(Cast Alloy Steel 1 Required)
(4) Spindle
(Cast Alloy Steel 1 Required)
PED| Alexandria University | Dr. Mohamed Nassef
| No.21
| No.22
(7) Pin
(Cast Alloy Steel 1 Required)
PED| Alexandria University | Dr. Mohamed Nassef
| No.23
| No.24
| No.25
| No.26
| No.27
Contact