Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
MECHANICAL
HELLO FRIENDS,
This year i wrote GATE exam for the first time and i secure 41.67 out of 100 and All India Rank is 4584 in
Mechanical side.
Guys i want to tell you all that securing above 60 marks in GATE is not that much difficult. I was unable to get
because of lack in preparation and not able to bear the pressure in the final 1 hour of GATE exam. still i got
promising marks, that boost me up.
Well in mechanical from the last 3 or 4 years the GATE pattern was quite easy compared to that of 2007 and
before. So now a days some serious concentration on very important topics make you to get away with a very
good rank.
Now i want to tell you that what are the most important topics in gate exam.
GATE PATTERN
GATE exam is of 100 marks and in mechanical average cut off is between 25 to 30, but may depend on the
exam of particular year. there is 70 marks for the all technical part of mechanical side which consist of core
mechanical subjects and other part consist of 15 marks engineering mathematics plus 15 marks for aptitude and
English.
Heat transfer, Thermodynamics, Fluid Mechanics and Machines, Strength of materials, Theory of
Machines, Production Technology, Power plant, RAC and Machine Design, IC engines
Engineering mathematics
for me preparing time is less so i left machine design and RAC, but i suggest you to not to leave any of these
subjects.i explain how to make this simple.
Strategy
Firstly cover Thermodynamics completely with last 10 years gate papers and after that when you are
through with the subject then its time for heat transfer and IC engine cycles i.e. Otto, and diesel cycles.
With Thermodynamics it is easy for you to cover heat transfer and understand it easily.
Now when you are done with these subjects then its time for Fluid and power plant subjects,
comparatively fluid syllabus is more than power plant, power plant only includes vapour power cycle
and steam power cycle. So these are the very important subjects
Now the most important subject according to me is Production Technology, all last year exam gives
you an idea how important is this. In GATE 2013 it consist of 16 marks out of 70. so it makes you feel
that how important is this subject, so give sufficient time to this subject to justify its importance.
Now subjects Theory of Machines and Strength of Materials have equal importance. Always 7 to 8
marks is expected from these subjects.
Machine design and RAC consist of less marks but never underestimate these subjects as of their
importance.
According to me at least 20 to 25 days are requires for the practise after your preparation of all subjects.
other subject i.e. maths, Eng. and aptitude also require time for the practise.
HOW TO MAKE PREPARATION SIMPLE
Now you are thinking all these subjects done at a time is very difficult to remember. so here the some ways to
how to do this:
1. firstly you prepare thermal subjects i.e. Thermodynamics, heat transfer, IC engines.
2. then start fluid along with practise of previous subjects.
3. at the middle of fluid start production and
4. when fluid ends along with of production start some 1 or 2 hour practise of maths, and aptitude.
5. when you all are done then try to give some tests so that to increase your speed.
6. doing all your practise set a time alarm near to you so that every time you can increase your speed.
7. now for machine design and rac if more time is there then go completely through these subjects
8. but if time is not there then try to see last year papers what is they are asking in these subjects and make
Strong that topics.
9. 20 to 25 days of complete practise is must.
10. try to maintain daily 8 to 10 hours, is you are able to give more that is up to you
soon i will post some more information regarding gate exam and list of important gate topics.
you can ask for any of your doubt.
keep preparing....
Probability
differential equations
Laplace transform
numerical methods
complex variables
matrix algebra
2. Production (IMPORTANT)
rolling calculations
Casting(important)
welding
3. Industrial Engineering
EOQ Models
Queueing Model
Forecasting
LPP
Balancing
4. SOM
Torsion
Theories of failures
thin cylinders
5. TOM
Mechanism
Gear train
Flywheel
6. DESIGN
Clutch, brake
7. THERMODYNAMICS
Basic concepts
pure substances
thermodynamics relations
8. FLUID MECHANICS
Properties of Fluid
Pressure measurement
Fluid kinematics
Hydraulic Turbine
9. HEAT TRANSFER
Conduction
10. RAC
Psychrometry
11. POWERPLANT
Steam cycle
Gas Cycle
12. IC ENGINES
Heat treatment
These are the very important topics for the GATE exam...
Any doubt and question are welcome....