Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1. Remove the screws (A, B) and clips (C, D) securing the front bumper (E).
NOTE:
To remove the clips C and D, pry the inner pin up at the edge near the line
(F) on its head.
Page 1
me
Sunday, May 17, 2009 3:20:11 PM
Page 2
Page 3
To remove the clips, pry the inner pin up at the edge near the line (B) on its
head.
me
Sunday, May 17, 2009 3:20:11 PM
Page 4
1. Remove the clips (A, B) and screws (C) securing the lower front bumper cover (D), and detach the clip
(E) from the front bumper (F), then remove the cover.
NOTE:
To remove the clips A and B, pry the inner pin up at the edge near the line
(G) on its head.
me
Sunday, May 17, 2009 3:20:11 PM
Page 5
Page 6
Fig. 10: Identifying Hooks, Lower Front Bumper Grille And Front Bumper
4. If necessary, remove the screws, then remove the air screen plates (A) from the lower front bumper grille
(B).
Fig. 11: Identifying Air Screen Plates And Lower Front Bumper Grille Fastener Locations
5. Install the grille in the reverse order of removal, and push the hooks into place securely.
me
Sunday, May 17, 2009 3:20:11 PM
Page 7
Fig. 12: Identifying Hooks, Front Bumper Side Cover And Front Bumper
3. Install the cover in the reverse order of removal, and push the hooks into place securely.
1. Remove the clips (A), screws (B), and bolts (C) securing the rear bumper (D).
me
Sunday, May 17, 2009 3:20:11 PM
Page 8
me
Sunday, May 17, 2009 3:20:11 PM
Page 9
Page 10
2. Remove the screws (A), clips (B), and nuts (C), then remove the rear bumper spoiler (D) from the rear
bumper (E). Take care not to scratch the rear bumper.
me
Sunday, May 17, 2009 3:20:11 PM
Page 11