Sei sulla pagina 1di 4

HTU-E1

HDSL Termination Unit

FEATURES

Setup, control and

HDSL NTU/LTU enabling

transmission of 2048 kbps


E1 data over unconditioned
twisted-pair lines
Extends the data
transmission range of up to
9.2 km (5.7 miles) with the
H-RPT repeater or up to
4.8 km (3 miles) without the
H-RPT repeater
Operates opposite RADs
HCD-E1, HTU-2 and H-RPT
Complies with the ETSI
HDSL standards
Supports unframed or
framed E1

monitoring using front


panel, ASCII terminal or
SNMP-based network
management station
Control of the remote unit
via embedded operation
channel or inband
management
Timeslot priority bumping
Call-out capabilities
supported via the control
port
Alarm buffer holding up to
100 alarms
Remote power feeding from
a modem card or standalone
unit

Enhanced diagnostics

include:
Loopbacks on the HDSL
lines and E1 port
!
E1 and HDSL
performance statistics
collection
High voltage line protection
in compliance with
ITU K.21
Available as a standalone
unit or as a card for the
LRS-24 rack
!

HTU-E1
HDSL Termination Unit
DESCRIPTION
HTU-E1 is an access unit that

converts the 2048 kbps E1 signals


into HDSL transmission format.
The conversion extends the
transmission range to cover
4.8 km (3.0 miles) over a 4-wire
link (24 AWG/0.5 mm) without
the need for repeaters or fiber
optic link.

Transmission of HTU-E1 complies

with the ETSI HDSL standards.


Using advanced equalization,
adaptive filtering, echo
cancellation technology and 2B1Q
line coding, the unit compensates
for line impairments, bridge taps
and mixed cabling. High immunity
to background noise enables
transmission of the multiple HDSL
lines in the same physical cable.

Setup, control and monitoring of

status and diagnostics information


can be performed using one of
the following:
! Front panel LCD with three
buttons, using menu-driven
management
! ASCII terminal connected
directly or via a dial-up modem
to the async control port using
command line interpreter
! SNMP management station
connected to the async control
port, using Serial Link Interface
Protocol (SLIP).

An embedded channel in the

The priority bumping feature

allows the user to select the


timeslot priority (high or low). In
this case, if one of the lines is
down, HTU-E1/HTU-E1L
continues to send data over the
HDSL link.

Timeslot assignment is

programmable, allowing data from


the E1 port to be placed into
timeslots, either consecutively or
alternately. In addition, the central
HTU-E1 provides full user control
over the timeslot allocation of the
remote HTU-2/HCD-E1 data
ports, or HCD-E1 sublink.

HDSL transmission provides both


control and diagnostic capabilities
from the centrally-located HTU-E1
to the remote unit at the
customers premises. The user can
monitor the link and alarms, and
perform online configuration, as
well as diagnostic loopbacks to the
remote unit.

APPLICATIONS

Figure 1. Central Site Application with SNMP Management and Remote Power Feeding

HTU-E1
HDSL Termination Unit
The standalone HTU-E1/PF and

HTU-E1C/P card provide remote


power feed for the HTU-E1L/P
unit or H-RPT HDSL repeater. For
the remote power feeding via the
HTU-E1C/P card, a standalone
power supply, LRS-PS-FEED,
should be ordered separately.

HTU-E1/HTU-E1L supports

call-out of the alarm conditions


via its front panel control port.

HTU-E1 supports an internal

SNMP agent and can be


controlled by the RADview SNMP
network management application,
as well as by any generic SNMP
station.

SPECIFICATIONS
HDSL INTERFACE

Compliance
ETSI TR-152

Line Code
2B1Q

Line Baud Rate

584 kbaud (equivalent to


1168 kbps), for each pair

Line Type

Two unconditioned, unloaded


twisted pairs

Impedance

Differential Line Delay

Maximum 50 s at 150 kHz

Equalizer

Automatic adaptive equalizer

Connector
RJ-45

E1 INTERFACE

Applicable Standards

ITU-T Rec. G.703, G.704, G.706,


G.732, G.823

Framing
!

135

Transmit Pulse Shape


as per ETSI TR-152

Transmit Signal Power


+13.5 dBm 0.5 dBm

Loop Loss

27 dB max at 150 kHz


(584 kbaud)

Range

Without H-RPT:
! 3.8 km (2.4 miles) over 26 AWG
(0.4 mm)
! 4.8 km (3.0 miles) over 24 AWG
(0.5 mm)
With H-RPT:
! 7.2 km (4.5 miles) for 26 AWG
(0.4 mm)
! 9.2 km (5.7 miles) for 24 AWG
(0.5 mm)

Return Loss

256N, no multiframe, intended


for use with CCS, without CRC-4
256N, no multiframe, intended
for use with CCS, with CRC-4
Unframed

Nominal Line Data Rate


2048 kbps

Line Code
HDB3

Line Impedance
!
!

120, balanced
75, unbalanced

Signal Levels

Transmit:
! 3V 10%, balanced
! 2.37V 10%, unbalanced
Receive: 0 to -10 dB

Jitter Performance
Per ITU G.823

Connectors
!
!

8-pin RJ-45 female, balanced


Two BNC coaxial, unbalanced

16 dB minimum, 25 kHz to
317 kHz at 135

Figure 2. Extending the HTU-E1 Operation Range via the Remote Power-Fed H-RPT Repeater

HTU-E1
HDSL Termination Unit
SUPERVISORY PORT
HTU-E1, HTU-E1/PF
Interface
V.24/RS-232

Type
DCE

Data Rate

0.3, 1.2, 2.4, 4.8, 9.6 kbps, with


Autobaud option

Word Format
!
!
!
!

One start bit


7 or 8 data bits
Parity: none, odd, or even
One stop bit

Connector

9-pin D-type, female

HTU-E1L
Proprietary 20-pin connector
HTU-E1C
Via CM-2 connector of LRS-24
rack
GENERAL

Timing

Central Unit:
! Internal, derived from local
oscillator
! External, locked to recovered E1
clock signal
Remote Unit:
! Loopback timing, derived from
incoming HDSL receive clock

Diagnostics

Loopbacks:
! Local loopback on the E1 port of
the local HTU-E1
! Local loopbacks on the two
HDSL lines
! Remote loopback on the E1 port
of the local HTU-E1
! Remote loopback on the E1 port
or data channel of the remote
unit
! H-RPT local line loopback
towards the LTU-configured unit
Statistics:
! HDSL performance statistics
collection as per ITU-T Rec.
G.826
! E1 performance statistics
collection with CRC-4 as per
ITU-T Rec. G.706 or BPV count
without CRC-4

Indicators

HDSL interface (per loop):


HDSL LOS Loss of Sync
E1 interface:
LOC LOS Local Loss of Sync
REM LOS Remote Loss of Sync
TST Test
ALM Alarm

Physical
HTU-E1:
Height:
Width:
Depth:
Weight

44.3
21.5
24.3
1.5

mm
cm
cm
kg

/ 1.75
/ 8.5
/ 9.5
/ 3.5

in
in
in
lb

HTU-E1/PF:
Height: 44.3
Width:
43.2
Depth:
26.0
Weight 2.1

mm
cm
cm
kg

/ 1.75
/ 17.0
/ 10.2
/ 4.6

in
in
in
lb

!
!
!
!

HTU-E1: 3.4W
HTU-E1L: 3.0W
HTU-E1/PF: 11W
HTU-E1C: 3.8W

Line Protection

HTU-E1L/N/*/+
HDSL network termination unit
HTU-E1/PF/N/*
HDSL termination unit, remote
power feeding version

HTU-E1CB/N/+
Card version for ANSI LRS-24 rack
* Specify power supply:
AC for 100 to 240 VAC
48 for -48 VDC
+ Specify P for phantom feeding
version of HTU-E1C or
phantom-fed version of HTU-E1L

AC: 100 to 240 VAC, 50 or 60 Hz


DC: -48 VDC (-36 to -72 VDC)
Remote power feed:
! From HTU-E1/PF
! From LRS-PS-FEED via
HTU-E1C/P

Power Consumption

HTU-E1/N/*
HDSL termination unit

HTU-E1CF/N/+
Card version for ETSI LRS-24 rack

HTU-E1C:
Fits the dimensions of the LRS-24
rack

Power Supply

ORDERING

LRS-PF-FEED
Standalone power supply for remote
power (phantom) feeding
RM-17
Special hardware for mounting one or
two HTU-E1/HTU-E1L units in a
19-inch rack
RM-7/NEW
Special hardware for mounting one
HTU-E1/PF unit in a 19-inch rack

According to ITU K.21

Environment

Temperature: 050C/32122F
Humidity:
Up to 90%,
non-condensing

2000 RAD Data Communications Ltd.


All other trademarks are the property of their respective holders.

652-100-12/00

Specifications are subject to change without prior notice.

Potrebbero piacerti anche