Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PROBLEM STATEMENT:Nitrogen flows through inlet with an uniform velocity of 22.6 m/s, passes through
a ceramic monolith substrate shaped channels and then exits through the outlet.
GEOMETRY:SIMULATION PROCEDURE:
Under problem setup> Cell zoe> Double click on part-in under zone.
Select material name:- Nitrogen
Default values for other settings.
Click to ok.
Similarly, visit to part-out zone and select the same settings as above.
Under problem setup>cell zone> double click on part catalyst under zone.
Select nitrogen as material.
Select and click on porous zone.
Under direction-1 vector, specify as:1,0,0 and direction-2 vector , specify
as:0,1,0.
BOUNDRY CONDITION:
Under problem setup> Boundry conditions.
Select inlet under zone and choose velocity-inlet from dropdown menu
under type.
Select outlet under zone and choose pressure-outlet from the dropdown
menu under type.
Input all parameters in momentum tab as shown below.
Before starting the calculation we must initialize the flow field in the entire
domain. Solution>Monitors> Solution initialization.
Select compute from inlet.
Click on initialize to initialize the solution.
The solution procedure can be started in the following manner. Solution >
Run calculation.
Enter 100 for number of iteration and click on calculate.