Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Tag No 57373
PIPING CLASS: A91 Z
DESIGN/ DIM STD: ManuFactu
INSPECTION/ TESTING STD: DIN
CONSTRUCTION DETAILS
Ball Type Design , Soft Seated
As Per PN 6
1 This Valve Specifaction Shall be read in Conjunction with PMS & VMS
2Vender Should Clearly write all /any Deviation against Each part /MOC spec provided , Whereever Ag
3 No Cutting /overwriting by contractor /vender Allowed
4 All valves shall be inspected as per relevent design /Inspection Code
RATING :150#
ENDS : Flanged as per ASME B16.5
DESCRIPTION
Top Body
Bottom Body
Ball
Ball Ring
Seat Ring
HYDRO TEST PRESSURE
CONSTRUCTION DETAILS
Ball type design,Soft seated
MATERIAL
PVDF(Poly vinylidene Fluoride
PVDF(Poly vinylidene Fluoride
PVDF Coated
PVDF
Neoprene rubber
As per PN10
1.) This Valve specification must be read in conjunction with PMS & VMS.
2.)Vendor should clearly write all/any deviation against each part/MOC spec. provided,wherever ag
3.) No cutting/overwriting by Contractor/Vendor allowed.
4.)All valves shouls be inspected as per relevant Design/Inspection code.
Manufactured Standard
G STD : DIN 3441
MATERIAL
VDF(Poly vinylidene Fluoride
VDF(Poly vinylidene Fluoride
VDF Coated
VDF
eoprene rubber
VENDOR ACCEPTANCE/DEVIATIONS
S.
spec. provided,wherever agree should write AGREE
e.
RATING :150#
DESIGN/DIM STAND :EN-558-1Metric 2501PN-10
ENDS : SW 800,Flanged as per ASME B16INSPECTION/TESTING STD : DIN 3441
DESCRIPTION
Central Parts
Body
Ball
Support Ring
Union Bush
Hand Wheel
CONSTRUCTION DETAILS
Extruded
Extruded
Extruded
Extruded
Extruded
Face Seal
Valve ends with Fusion
Valve Nuts
HYDRO TEST PRESSURE
Fabricated
Extruded
Hand wheel
MATERIAL
U
U
U
U
U
PVC/PVDF
PVC/PVDF
PVC/PVDF
PVC/PVDF
PVC/PVDF
10 KG
1.) This Valve specification must be read in conjunction with PMS & VMS.
2.)Vendor should clearly write all/any deviation against each part/MOC spec. provided,wherever agree
3.) No cutting/overwriting by Contractor/Vendor allowed.
4.)All valves shouls be inspected as per relevant Design/Inspection code.
EN-558-1Metric 2501PN-10
G STD : DIN 3441
MATERIAL
VENDOR ACCEPTANCE/DEVIATIONS
PVC/PVDF
PVC/PVDF
PVC/PVDF
PVC/PVDF
PVC/PVDF
MS.
C spec. provided,wherever agree should write AGREE
ode.
RATING :150#
ENDS : WAFL as per B 16.5,WAF/125AARH
DESCRIPTION
Body
Disc
Shaft
Disc Seal/Liner
Body Screws/Pin
Body Seats
Shaft Seal
CONSTRUCTION DETAILS
CAST
CAST
ANTI STATIC
REPLACEABLE
MATERIAL
DUCTILE IRON
SS-316(TEFLON LINED)
CS 13% Cr/ SS 316 (NO CA
NITRILE RUBBER/ EPDM
SS 316
EPDM
NITRILE RUBBER/ BUNA N/
VITON
1.) This Valve specification must be read in conjunction with PMS & VMS.
2.)Vendor should clearly write all/any deviation against each part/MOC spec. provided,wherever agree
3.) No cutting/overwriting by Contractor/Vendor allowed.
4.)All valves shouls be inspected as per relevant Design/Inspection code.
BS-5155
G STD : BS-5155
MATERIAL
UCTILE IRON
S-316(TEFLON LINED)
S 13% Cr/ SS 316 (NO CASTING)
ITRILE RUBBER/ EPDM
S 316
PDM
ITRILE RUBBER/ BUNA N/ EPDM/
ITON
VENDOR ACCEPTANCE/DEVIATIONS