Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PSG Walkre
The precision rifle made in Bavaria / Germany
The Precision Rifle range Walkre is based on our own designs and is built in-house. The actions are manufactured with our state of the art CNC centres using the finest steels.
Currently we supply three action sizes - short, long and magnum. Without compromising accuracy we complete the rifles by using selected Lothar-Walther-match-barrels in
customized lengths. We offer our customers a selection of different rifle stocks for their Walkuere Rifle. We provide the E-Tac from PSE Composites in standard length of 14,2 inches
and an adjustable cheek piece with roughly 1.2 inches travel. Furthermore we provide a selection of stocks from AICS.
Fluted Bolt.
Magazines available.
Choice of 4 stock versions. Options for adjustable cheek, folding stock, bipod
attachments and choice of 3 colours.*
Lothar Walther Match barrel Article Nr. 7525. 52cm, 58cm or 65cm barrel length
depending on cartridge.*
Combinations
Calibre
Options
Action
Barrel length in cm
52
58
Stock
65
.223 Rem.
Short
6,5x47 Lapua
Short
+ AICS AT fixed
.260 Rem.
Short
+ AICS AT folding
+ Ball
.308 Win.
Short
+ AICS AX folding
--
Long
--
6,5 x 55
Long
--
Standard / Optional
6,5-.284
Long
--
Magnum
--
--
Trigger
(Plastic)
EWB. This article can only be purchased with the correct licence. The pictured Walkure has the following features: 308Winchester with 65cm Barrel, barrelled
action coated in tan, E-Tac stock in tan colour, cone shaped bolt knob, Shilen trigger, Muzzle break, Schmidt & Bender 5-25x56 PMII mounted on ERA-TAC.
+ Cone
Pear
Shilen
Jewell
Tikka T3 Laminated Stainless with single stage trigger and standard bolt handle. Open sights not included.
The Tikka T3 can only be purchased with the correct licence.
Make your Tikka T3 safer. We have developed a 3-position safety to replace your
safety lever can be removed horizontally between "safe & bolt locked" to "safe bolt free
standard 2-position safety for left or right actions. The original plastic shroud is repla-
to load/unload" and to "fire" positions. The original safety will not be required and is
ced by our blued steel shroud. The safety now engages directly on the firing pin. The
Cocking lever left, red dot visible: cocked and bolt can be opened.
Bchsenmacherei zu Hochwang Andreas Schuler Leitiweg 25 D-89335 Ichenhausen / Hochwang Tel. +49 82 23.40 90 61 Fax +49 82 23.40 90 66 info@buema-hochwang.de www.buema-hochwang.de