Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Notice
The information contained in this document is subject to change without notice.
UNLESS EXPRESSLY SET FORTH IN A WRITTEN AGREEMENT SIGNED BY AN AUTHORIZED REPRESENTATIVE OF STRATUS
COMPUTER, INC., STRATUS MAKES NO WARRANTY OR REPRESENTATION OF ANY KIND WITH RESPECT TO THE
INFORMATION CONTAINED HEREIN, INCLUDING WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PURPOSE. Stratus
Computer, Inc., assumes no responsibility or obligation of any kind for any errors contained herein or in connection with the furnishing,
performance, or use of this document.
Software described in Stratus documents (a) is the property of Stratus Computer, Inc., or the third party, (b) is furnished only under license, and (c)
may be copied or used only as expressly permitted under the terms of the license.
Stratus manuals document all of the subroutines and commands of the user interface. Any other operating-system commands and subroutines are
intended solely for use by Stratus personnel and are subject to change without warning.
This document is protected by copyright. All rights are reserved. No part of this document may be copied, reproduced, or translated, either
mechanically or electronically, without the prior written consent of Stratus Computer, Inc.
Stratus, the Stratus logo, Continuum, StrataNET, FTX, and SINAP are registered trademarks of Stratus Computer, Inc.
XA, XA/R, StrataLINK, RSN, Continuous Processing, Isis, the Isis logo, Isis Distributed, Isis Distributed Systems, RADIO, RADIO Cluster, and
the SQL/2000 logo are trademarks of Stratus Computer, Inc.
Apple and Macintosh are registered trademarks of Apple Computer, Inc.
IBM PC is a registered trademark of International Business Machines Corporation.
Sun is a registered trademark of Sun Microsystems, Inc.
Hewlett-Packard is a trademark of Hewlett-Packard Company.
UNIX is a registered trademark of X/Open Company, Ltd., in the U.S.A. and other countries.
Manual Name: Module Control Panel Notice for XA2000 Models 210-280 Users
Part Number: R387
Revision Number: 00
Printing Date: February 1993
VOS Release Number: 8.0
FTX Release Number: 1.0, 2.1
Preface
The Module Control Panel Notice for XA2000 Models 210-280 Users (R387) provides
information about the control panel for XA2000 Models 210-280.
This manual is intended for system administrators.
Manual Version
This is a new manual.
Manual Organization
This manual contains one chapter.
Related Manuals
Refer to the following Stratus manual for related documentation.
Monospace represents text that would appear on your terminals screen (such as
commands, subroutines, code fragments, and names of files and directories).
For example:
change_current_dir (master_disk)>system>doc
Monospace italic represents terms that are to be replaced by literal values. In the
following example, the user must replace the monospace-italic term with a literal value.
list_users -module module_name
Module Control Panel Notice for XA2000 Models 210-280 Users (R387)
iii
Preface
V103
ASCII
V103
EPC
IBM PC or
Compatible
PC
CANCEL
<F18>
<5> or *
<F18>
CYCLE
<F17>
<F12>
<Alt>-<C>
<4>
<F17>
<Shift>-<F17>
<Shift>-<F12>
<Alt>-<B>
<7>
<Shift>-<F17>
<F19>
<6> or -
<F19> or
<Shift>-<Help>
HELP
<Shift>-<F8>
<Shift>-<F2>
<Shift>-<F2>
<Shift>-<F8>
<Help>
INSERT
DEFAULT
<Shift>-<F11>
<Shift>-<F10>
<Shift>-<F10>
<Shift>-<F11>
<F11>
<F11>
<F10>
<F10>
<F11>
<Insert_Here>
INTERRUPT
<Shift>-<F20>
<Shift>-<Delete>
<Alt>-<I>
<1>
<Shift>-<F20>
NO PAUSE
<Shift>-<F18>
<Shift>- *
<Alt>-<P>
<8>
<Shift>-<F18>
VOS Function
CYCLE BACK
DISPLAY FORM
INSERT SAVED
Numeric-keypad key
iv
Preface
V105
PC/+ 106
V105
ANSI
Contents
Module Control Panel Notice for XA2000 Models 210-280 Users (R387)
Figures
Figure 1-1. The Location of the Control Panel, Serial Line, Main Chassis Door, and Cabinet Door .
Figure 1-2. The Serial Line and the Main Chassis Door . . . . . . . . . . . . . . . . . .
Figure 1-3. A Fault Tolerant Control Panel . . . . . . . . . . . . . . . . . . . . . . .
vi
Figures
1-1
1-2
1-2
Chapter 1:
The Control Panel for XA2000 Models 210-280
1-
The control panel for XA2000 Models 210-280 is mounted in the main chassis. If a serial line
is connected to the control panel, you must disconnect the serial line before opening the main
chassis door to access the processor boards.
Figure 1-1 shows a module with the cabinet door open and the main chassis door closed.
1
Serial
Line
Control
Panel
Main Chassis
Door
Cabinet
Door
AD0562
Figure 1-1. The Location of the Control Panel, Serial Line, Main Chassis Door, and Cabinet
Door
You may need to open the main chassis door to inspect or change boards. Before you open
this door, first detach the serial line (or lines) connected to the control panel.
The serial line, which connects the control panel to a terminal or modem, hangs in front of
the main chassis door. Figure 1-2 shows a close view of the serial line and the main chassis.
Module Control Panel Notice for XA2000 Models 210-280 Users (R387)
1-1
Main Chassis
Door
MODULE CONTROL UNIT
UNIT
FAILURE
Serial Line
OPERATING
UNIT
FAILURE
IMMEDIATE
POWER
OFF/ON
BATTERY
TEST/
PROBLEM
CYCLE
ENTER
Serial Port
AD0563
Figure 1-2. The Serial Line and the Main Chassis Door
Do not try to open the main chassis door without first detaching the serial line. Stretching
the serial line can damage it.
To detach the serial line, grab the serial line connector and pull the line out of the serial port.
After detaching a serial line from a module control panel configured with both the Operator
Interface Unit (OIU) and the Module Control Unit (MCU), you can issue commands to the
control panel from the OIU. However, if the control panel is configured to be fault tolerant (a
two MCU configuration), you cannot issue query and control commands while the main
chassis door is open and the serial line is disconnected. For example, do not plan to issue
a manual reboot from the terminal connected to the serial line.
Figure 1-3 shows a fault tolerant control panel.
3
UNIT
FAILURE
AD0503
1-2
To reattach the serial line once you have finished accessing the main chassis, line up the serial
line connector pins with the port under the control panel and insert the connector into the
serial port.
Module Control Panel Notice for XA2000 Models 210-280 Users (R387)
1-3
1-4