Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
This guide is based on the following BMW-Type: E87 BMW 130i Facelift with standard
front-speaker system (10cm / 4 "wide strip and 16cm / 6" woofer under seat) Deviations
from these instructions on other BMW models can not be excluded
Required goods
1x 100FX GZRC
2-way component system
Extra-flat 100mm bass-midrange
- Coated paper cone -25mm silk
dome tweeter
- Adjustable Crossover
- 70 WRMS / Peak 110W / 4 Ohm
2x GZMW 200NEO
Extra-flat 20cm woofer
Neodymium magnet
-Coated paper cone
-100 WRMS / 150 W peak / 4 Ohm
1x GZBR 200BMW
-20cm steel adapter ring for
under-seat assembly instead of
GZMW 200NEO The BMW-woofer
1x 100FX GZRC
2-way component system
Extra-flat 100mm bass-midrange
-Coated paper cone
-25mm silk dome tweeter
-Adjustable Crossover
-70 WRMS / Peak 110W / 4 Ohm
BMW-standard components
GROUND ZERO
Reference vehicle
-2-
Installation instructions
1. First Removing door panel
Connector from
-3-
Hold the panel with one hand and solve they plug
the speakers and facilitators with the other hand
AND
-4-
-5-
Take the BMW bolts to the loudspeaker together with the To mount plastic adapter.
Close to the crossover to the midrange and prepare for HT cables and input
-6-
-7-
6. Insulation
Minimum, recommended
insulation
-8-
7. Cable to crossover
Driver alignment
Front alignment
Driver's side
Passenger side
Jumper High
Jumper Low
Jumper High
Tweeterphase 0
Tweeterphase 0
Tweeterphase 0
9. Fixation of jumpers
For this, use a hot glue gun.
-9-
Both sides
-10-
Insert the adapter 200NEO GZBR 200BMW, the GZMW and the plastic ring
GZMW 200NEO of lattice together. Take the 4 x Phillips screws that came with the
GZBR 200BMW are included and connect woofer and plastic ring to the adapter.
-11-
Woofer setting
- Jumper J1: Low
-12-
Different instructions, depending on vehicle type, year and equipment can not be excluded.
Therefore, all information on this installation manual oe and relate only
to that GROUND ZERO reference used vehicle. Any liability for defects or damage
caused by the above-mentioned Deviations caused by improper installation or,
rejects GROUND ZERO. Technical changes and errors