Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
The Fluke Power Analyze software lets you work with power quality
data monitored and collected in the 1750 Power Recorder.
Using Fluke Power Analyze, you can:
Download data from a Recorder and save the data in a file.
Use the Recorded Data Views to analyze downloaded data from a
1750 Power Recorder.
Use the Snapshot Views to see what the recorded power quality
data looked like at specific points in time.
Build reports with a single click. Store the report configuration for
reuse. Document important data as you identify it in the recorded
data files. Export data to Microsoft Word.
View live data by connecting to a Recorder connected to power.
View and change the settings of a 1750 Power Recorder.
You can also use the Fluke Power View application on the PDA (the
handheld device) that comes with each 1750 Power Recorder to
perform the 1750-specific tasks such as downloading data, viewing
live readings, and changing 1750 internal settings.
Power Analyze gives you the tools you need to review and analyze
power quality data after it has been downloaded.
If you are new to Power Analyze, you might find it useful to start with
the topics described in Getting Started with Power Analyze.
The most up-to-date information about Power Analyze is available in
the Release Notes.
If you are new to using Power Analyze, the list of tips below can help
you get up to speed.
When you start Power Analyze for the first time, a sample data file
is available, see the file history in the File menu. This file contains
data that was downloaded from a Recorder. You can use it as you
get used to working with Power Analyze.
Select a language for the user interface. On the Power Analyze
Menu bar, go to Settings > Language. The program automatically
restarts with the new language selection.
Start by exploring the software. Feel free to click the different
buttons and controls. As you do so, you may see different views of
the data in the file. You will not damage the sample file or delete
anything from it.
To understand what you see on the screen, see Overview of the
Power Analyze Modes and Overview of the Power Analyze Screen.
Power Analyze provides tools to help you examine and analyze data
that you have recorded and downloaded. To learn how you can
adjust the views into the data, review the topics under Adjusting
Views and Graphs.
For Help at any time as you work with Power Analyze, just press F1
or click the Help button at the top of the View Controls on the
right. For other ways to access Help, see Getting Help When You
Have a Question.
If you are ready to download data, see Downloading Data.
Note
When you first install Power Analyze, the colors used on
traces in graphs and the labels used for phase identification (A, B, C or L1, L2, L3) are set to the regional
default for USA. You can change these to use a different set of Regional Defaults or further customize the
specific colors used, in Preferences. For details, see
Setting Preferences.
You may also want to review the 1750 Power Recorder Getting
Started Guide. For more information, see Other Documentation.
You can also open the help system by choosing Help Topics from the
Help menu.
Once Help is open, you can use the Contents, Index, and Search
tabs on the left to help you locate information.
If the Help window is too wide, you can hide the navigation
pane on the left by clicking the Hide button at the top of the Help
window. To open it again, click Show.
Other Documentation
In addition to this online help, two other documents are available that
contain additional information.
1750 Power Recorder Getting Started Guide
The Getting Started Guide provides an overview of working with
the Recorder, Power View on the PDA, and Power Analyze.
If you have not used the Recorder or Power Analyze before, this
document is a good place to start.
This guide is available as a printed book and a PDF on the CD that
is included with your 1750 Power Recorder. The PDF is also
available at http://www.fluke.com.
1750 Power Recorder Operators Manual
The Operators Manual includes information about setting up the
Recorder and using the PDA. It also includes specifications about
the Recorder.
For information about connecting the Recorder and using the PDA
to work with it, the Operators Manual is your best source of
information.
This manual is available as a PDF from the Help menu in Power
Analyze, on the CD included with your 1750 Power Recorder, and at
http://www.fluke.com.
Technical Support
To contact Fluke, call:
1-888-993-5853 in USA
1-800-363-5853 in Canada
+31-402-678-200 in Europe
+81-3-3434-0181 in Japan
+65-738-5655 in Singapore
+1-425-446-5500 from anywhere in the world
Or, visit Flukes Web site at http://www.fluke.com
To register your product, visit http://register.fluke.com
azd246.png
View Recorded lets you analyze data that has been downloaded
from a 1750 and saved as a data file.
Auto Report lets you create configurable reports of downloaded
data in MS Word or PDF.
View Snapshots lets you see snapshots of measured power conditions taken manually or on a periodic basis throughout the
monitoring period and stored in the recorded data file.
View Settings lets you see the 1750 settings that were in effect
when the recording was made. This includes power configuration,
nominal voltage and frequency, voltage and current ratios, and
other connection factors that impact how data displays.
Live Data Modes
These modes are available when connected to a 1750 Power Recorder.
1750 Setup lets you view and set the instrument settings,
including the power configuration, nominal voltage and frequency,
voltage and current ratios, and other details about the data that is
recorded before starting a recording session. You can also specify a
password for accessing the recorder.
1750 Live lets you monitor data directly, when you are connected
to a 1750 Power Recorder.
1750 Download lets you retrieve data from the Recorder and save
it on your computer.
azd200.png
Number
1
2
3
Description
Connected Recorder. When you are connected to a 1750
Power Recorder, this field shows its name. A drop-down list
shows other Recorders to which you can connect.
Name of data file. When you view recorded data, the name
of the ".odn" file appears in the window title bar.
Help buttons. Several types of online help are available for
Fluke Power Analyze. Two are shown on this screen. For
details, see Getting Help When You Have a Question.
Main Data Area. The central part of the screen shows the
power quality data for the active mode and view. You can
make further adjustments to how the data is displayed by
using the view controls and tool bars.
View toolbar. Provides quick access to the different power
quality data views for the active mode (Recorded Data,
Snapshots, or Live 1750 Data). The active button on the
View toolbar indicates the view you see now.
9
10
azd213a.png
Number
1
2
3
4
5
Description
Name of open data file. Shows the name of data file that is
currently open.
Reference graph. Provides an overview of the data for the
entire recorded period.
Detail graph. Shows a detailed view of a portion of the
recorded data, determined by the selection cursors on the
top graph.
Selection cursors. The selection cursor(s) mark the data
shown in the Detail graph. As you move the cursor(s), the
data in the detail graph adjusts.
View toolbar. Lets you change between recorded data views.
The active button indicates the view you see now.
View controls. Specify what data to display in the view, and
how it should appear. For example, on the Volts/Amps/Hz
graph shown above, view controls let you hide or show
phases, select whether maximum values are shown, show or
hide annotations, and so forth. For details, see Using the
View Controls.
azd201a.png
Number
1
3
4
5
6
Description
Open data filename. Shows the name of the data file that is
currently open.
Main data area. Displays a snapshot of the conditions at the date
and time shown in slider bar. In this example, the snapshot is of
the Scope, for the phases checked in the Phase Selection. For
details about the contents of the different snapshot views, see
Snapshot Views.
Slider bar. Allows you to move to a snapshot at a different point
in time within the recorded data by dragging the slider.
View toolbar. Lets you change to different Snapshot views:
Scope, Phasor, Meter, Harmonics, and Power. The active button
indicates the view you see now.
Next/Previous buttons. Lets you move through snapshots one at
a time by clicking these buttons.
View controls. Specify what data to display in the view, and how
it should appear. For details, see Using the View Controls.
azd202.png
azd203.png
azd201b.png
Number
1
2
3
4
Description
Connected recorder. Shows the name of the Recorder to which
you are connected.
Main data area. Displays the power quality parameters you are
viewing: Scope, Phasor diagram, Meter, Harmonics, or Power.
For details about the different live views, see Live 1750 Views.
View toolbar. Lets you change between live views. The active
button indicates the view you see now. In the screenshot
above, Scope is active.
View controls. Specify what data to display in the view, and
how it should appear. For details, see Using the View Controls.
azd205.png
Number
1
2
Description
Reference Graph. Previews the data available to be
downloaded.
Selection Cursors. Initially expanded to the full width of
available data, these cursors can be moved to select a
portion of data to download.
Annotation Markers. Indicate points where an annotation was
inserted during monitoring. If desired, these can be selected
as starting or ending points of the data to be downloaded.
For details, see To download by selecting annotations.
From/To. Indicate the starting and ending date and time of
the data that will be downloaded when you click Save.
azd247.png
Recorded data views show trend and detail data that has been
downloaded from a 1750 Power Recorder.
Snapshot View Toolbar
azd248.png
azd248.png
1750 views display live conditions when you are connected to a 1750
Power Recorder.
You can also change views by choosing commands from the
View menu.
Most of the views in Fluke Power Analyze allow you to select specific
channels to include or exclude from the display in view by checking
options in the Phase Selection control. Each channel appears as a
different color on the graph. (You can change what colors are used
through Settings > Preferences. In this menu, you can also enable the
plot legend to identify the displayed channels.)
The specific checkboxes that appear in the Phase Selection option vary
from one view to the next, however the basic use of this control is the
same in all views. The example shown here is from the Volts/Amps/Hz
view.
bae040s.png
Note
If some checkboxes in the Phase Selection option are
grayed, it means they are not relevant for the data you
are viewing. For example, they may not be available for
the power configuration that was recorded (for
recorded data and snapshots), or that you are viewing
(for live data). The power configuration appears in the
status bar at the bottom of the screen.
Changing the Phase Selection only alters the display of
information. It has no impact on the data stored in the
recorded data file.
In the recorded data views for Volts/Amps/Hz and
Events, and in the Live Scope view, you can also
change the Voltage Reference, viewing the data as
either Phase to Phase, Phase to Neutral, or Phase to
Ground. Changing the voltage reference also changes
the labels in the Phase Selection option to reflect the
reference.
If you change the Voltage Reference, an alert icon displays, and a message reminds you that you have overridden the normal setting.
bae030s.png
View controls on the right side of the Fluke Power Analyze window let
you refine the data shown in the main data area.
The specific controls that appear depend on the type of data you are
viewing. The controls shown here are those that appear for the
recorded Events view.
For details about the controls for a particular view, see the Help topic
about the view by clicking the Help button on the view control panel.
bae046s.png
bae047s.png
You can select the other Y-axis by clicking on it. When you do, the grid
shifts to line up with the tick marks on that axis.
When you use these tools, Power Analyze zooms in and out around
the center of the graph. If you Zoom in on a graph and the data
disappears, it is likely that the data was not near the center of the
graph. To zoom in on a particular portion of the graph, use the
Zoom box.
To zoom in on a section of a graph with the Zoom box
The Zoom box control is available on most Detail graphs in the bottom
half of the main data area, and on some Reference and Live graphs.
By definition, detail graphs focus on a subsection of the data, defined
by the position of selection cursors in the summary or reference
graph. Zoom controls let you focus on even smaller portions of data.
Zooming in may also allow you to see additional information and more
detail.
1. If it is not already active, click the Zoom Box
tool.
2. Draw over the section of the graph you want to see in more detail.
bae031s.png
Fluke Power Analyze zooms in on the area you marked and centers it
in the window.
The selection cursors on the Reference Graph shift to mark the new
selection.
1. If the information you want is not quite centered, scroll horizontally
or vertically.
Note
You can zoom in multiple times on an area of a graph.
If the graph becomes blank, you have zoomed past the
point at which data is available; no data points are in
view.
To zoom out
If you want to zoom out incrementally, click the Zoom Out button
.
If you want to zoom back to 100% size, click the Zoom All the
Way Out button
azd210.png
The available data zooms to the size of the window, based on the axis
where you right-clicked. If appropriate, the axis will adjust to match
the range of data.
To use manual scale
You can define the range of the vertical axis by using Manual Scale.
Manual Scale is only supported on time axes in the View Recorded
screen.
1. Right-click on the axis you want to have resized.
2. Click on Manual Scale.
When Manual Scale is applied on the Y-axis, the dialog box displays
the minimum and maximum value of the available data. Using the
Manual Scale on the time axis allows you to enter either the start
and end date or the start date and a time span from a predefined
list.
3. Click OK to apply the changes.
azd255.png
The scale range is internally stored. When you switch to another view
and back it will still use the entered values for scaling. It is not stored
to the measurement file. So once the file has been closed you need to
re-enter the values.
Note
Independent from the local settings of Microsoft Windows, use "." as the decimal separator.
Zoom In/Out with the Mouse Wheel
Zoom In/Out and the Zoom Box from the graph toolbar always affect
both axes. If you want to zoom in/out on one axis separately you can
zoom in/out with the use of the mouse wheel.
Click on the axis you want to resize. A dotted border indicates the
selected axis.
To Zoom In, press <CTRL> key and roll the mouse wheel up to
increase the zoom level.
To Zoom Out, press <CTRL> key and roll the mouse wheel down to
decrease the zoom level.
bae007s.png
azd212.png
Some Reference graphs make use of two selection cursors to mark the
boundaries of the data being selected. Other Reference graphs and
Detail graphs have one selection cursor, to identify a particular point
in time or a particular harmonic.
In the example shown here of the Volts/Amps/Hz Reference graph,
two selection cursors mark the starting and ending points of data to be
displayed in the Detail graph.
Measuring Data
Related topics
Adjusting Views and Graphs
Viewing Data as a Table
Selecting Data with Cursors
You can measure values on detail graphs by using the measurement
guides to determine the exact measurement of waveform peaks or
event amplitude or duration.
Tip: When you want to see measured values, you can also click the
Table icon to see a tabular view of the data (see Viewing Data as a
Table).
This topic is organized into the following sections:
Measurement Control Showing Absolute Values
Measurement Control Showing Relative Values
azd258.png
Number
1
Description
Guide Tool. Displays or hides the measurement guides and cursor
in the detail graph. Located on the graph toolbar.
Vertical Cursor. Movable vertical cursor that you can use to see
the date, time, and magnitude at particular locations on the
graph. The cursor snaps on data points. The color of the cursor
indicates the phase of the selected data point. In recorded data
graphs the upper cursors may also adjust the visible data in the
lower graph. See help page of the individual views for more
details.
Cursor Label. Shows the magnitude, date, and time at the
position of the cursor.
Selection Tool. Toggles with the Zoom Box tool and allows
snapping the nearest cursor to a selected data point. When you
click on a cursor to drag it, the zoom box mode is disabled and
the select mode is active.
To hide or show the measurement guides
Click the Guide tool
azd259.png
azd256.png
Number
1
Description
Guide Tool. Displays or hides the measurement guides and cursor
in the detail graph. Located on the graph toolbar.
Horizontal Cursors. Movable horizontal cursor that you can move to
any vertical position in the graph. When you click in the intersection of the horizontal and vertical cursor you can drag both
cursors and snap them on a data point.
Delta Y-Label. Shows the difference between the horizontal
cursors. To change the unit, click on the trace drawn with a
different unit.
Vertical Cursors. Movable vertical cursor that you can move to any
data point in the graph. It automatically snaps to data points.
When you click in the intersection of the horizontal and vertical
cursor you can drag both cursors and snap them on a data point.
Delta X-Label. Shows the difference between the vertical cursors.
The time difference is shown in the same format that is used for
the horizontal axis. Typically this is d hh:mm:ss.000 (dDays,
hhHours, mmMinutes, ssSeconds)
Selection Tool. Toggles with the Zoom Box tool and allows you to
drag cursors. When you click on a cursor to drag it, the zoom box
mode is automatically disabled and the select mode is active.
Data point markers are the dots on each data point. They are helpful
when you use the measurement guides. Guides snap to the nearest
data point.
Enabled data point markers indicate where the cursors can be placed.
Data point markers also indicate at which aggregation interval the
data is recorded. See "Resolution of the Data" for more details.
Data point markers are automatically hidden when the shown graph
contains too much data points causing to overlap the markers.
Enable/Disable Legend
Related topics
Setting Preferences
Phase Colors and Labels
About the recorded data
When enabled, the plot legend is an area below each plot. This area
shows examples of each trace and the name of the measurement to
help you to identfy each parameter in the graph. When the legend is
disabled, the plot area is larger.
In Auto Reports independent from this setting, the legend is never
shown. Tagged screens are exported with respect to this setting. If the
legend is disabled, additional text is added to identify the shown
traces.
Note
This feature also works when you are displaying either
the top or bottom set of data as a table.
azd213b.png
Number
1
2
3
Description
Split/Full tools. Three buttons on the toolbar let you control
whether you see one or two graphs in the main view area.
Reference Graph. The top graph shows an overview of the
data for the view.
Detail Graph. The lower graph typically shows details about a
portion of the reference graph.
azd214.png
Note
When you change an individual color or Phase Identification, the value in Regional Defaults changes to "custom."
Enable or disable data point markers. Enabled, data point
markers are disabled automatically when data points overlap.
Enable or disable the plot legend.
3. When you are finished, click OK.
To start Fluke Power Analyze and open a file at the same time
1. In the Windows Explorer or on your desktop, locate the .ODN file
you want to open.
2. Double-click the file to open it in Fluke Power Analyze.
To open a data file when Fluke Power Analyze is already open
1. From the File menu, choose Open.
2. In the Open dialog box, navigate to the file you want to open,
select it, and click Open.
The file opens in a Fluke Power Analyze window and displays the
Summary view. The name of the file appears in the application title
bar.
Note
If you get a message that the file contains power settings changes and needs to be split, see When Files
Need to be Split.
Tip: If you want to compare data in two different files, you can do so
by opening another instance of Power Analyze. After one file is open,
go to the directory that contains the second file you want to see, and
double-click it. Power Analyze will open the second file in a new
application window. Note: Some features will not be available in the
second instance of Power Analyze. For example, you will not be able to
connect to Recorders from the second instance.
To close a data file
1. From the File menu, choose Close.
Recorded data is power quality data that has been downloaded from a
1750 Power Recorder and saved in a data file.
These views of the data are available:
Summary
Volts/Amps/Hz
Events
Harmonic Summary
THD (Total Harmonic Distortion)
Flicker
Power/Energy
You switch between these views by clicking the view buttons at the
top of the window.
azd247.png
If the data you want to see is in a different file, use the File > Open
command to open the data file. The current file name appears in the
window title bar.
Tip: Included in the recorded data file are snapshots of the live power,
taken at regular intervals. For details, see Snapshot Views.
Note
Power quality standards specify averaging intervals for
recording trend data over long time periods. When
viewing graphs of averaged data, keep in mind that
short term variations in the parameter being measured
may not be readily apparent in averaged measurements. You may find it helpful to enable the Max or
Max/Min feature on these graphs to show the range of
cycle-by-cycle excursions during each averaging interval.
At the beginning of recorded data, the first averaging
period in a timeplot will sometimes appear lower in
amplitude than subsequent averaging periods. This is
because during part of the first averaging period the
input may not have been connected to the voltage test
points yet.
Snapshots comprise a collection of measurements made at a point in
time. You can manually trigger a snapshot (see Taking a Snapshot
Manually), or you can set the Recorder to automatically record
snapshots at ten minute, thirty minute, or sixty minute intervals (see
Setting Automatic Snapshot Frequency). After the recorded data has
been downloaded to Power Analyze, you can view each snapshot
collection by clicking on the View Snapshots button (see
Viewing Snapshots).
Power Configurations
The power configuration determines how voltage data is interpreted
from the Recorder. The available power configurations fall into
categories of Delta, Wye, and single-phase configurations. Delta
power configurations view voltage power measurements natively from
phase to phase, while Wye power configurations view the
measurement from phase to neutral.
When Power Analyze displays data, it initially uses the power configurations to determine how to display it. In many views, you can choose
to see the data from phase-to-phase, phase-to-neutral, or phase-toground, regardless of the power configuration. For example, when
recorded as delta, a calculated or metering neutral is used for phaseto-neutral reading. For more information, see the discussion of
Voltage Reference under Selecting Channels to View.
You will also find information about how the data is calculated and the
product specifications in the Fluke Power Recorder Operator's
Manual, available from the Help menu.
View
Type
Parameter
Live/Snapshots
Scope
Phasor
Voltage
Current
Voltage
Phasor angle
Unbalance
Meter
Current
Phasor angle
Voltage
% THD
Current
% THD
% TDD
K-Factor
Power
PF
DPF
Harmonics
Voltage
% THD
% Odd Harm
% Even Harm
Current
% THD
% Odd Harm
% Even Harm
% TDD
K-Factor
Power
Power
Summary
Voltage
PF
DPF
Recorded
Unbalance
THD
Harmonics
V/A/Hz
Events
Harmonics
Voltage
Current
Frequency
Voltage
Current
Voltage
Bargraph
Detailed graph (shown as % of
Fundamental)
Current
Bargraph
Detailed graph (shown as % of
Fundamental)
THD
Voltage
Reference plot
Bargraph (shown as % of Fundamental)
Current
Reference plot
Bargraph (shown as % of Fundamental)
Power/Energy
Power
PF (avg)
DPF (avg)
The limits for Voltage, Current, and Power depend on the voltage and
current ratios and the used Current probes.
Voltage
V (fund) min = 6 V x Voltage Ratio
(example: Voltage Ratio = 10:1: Voltage limit = 60 V)
Current
I (fund) min = 0.001 x Current Ratio x Current Range
(example: using 400 A clamps and Current Ratio = 1:1: Current limit
= 400 mA)
Power
RMS value of Voltage and Current must exceed their limits.
azd217.png
You can also see all settings for the data on the View Settings screen.
To view all settings for the recorded data in view
1. Click the View Settings button on the left side bar to open the
View Settings screen.
This button is only available when a recorded data file is open.
In the View Settings screen, settings you can view on the
Measurement tab include:
Measurement Description (including recorded data)
Power Configuration
Nominal Voltage (V RMS)
Nominal Frequency (Hz)
Phase Connections
Voltage/Current Ratios
Snapshot Interval
Settings you can view on the Instrument tab include:
Recorder Name
1750 Clock
Network Address
Password Required (yes/no)
Current Probe Detect
For details about the fields, see 1750 Measurement Setup and 1750
Instrument Setup.
To add or modify the measurement description
It is possible to enter up to 6 rows with 50 characters each. The
captions can be deleted or overwritten with up to 20 characters. To
apply the changes, click Save.
azd218.png
Viewing Summary
Related topics
Limit Configuration for Summary Views
Using Automatic Report Writer
Recorded Data Screen Overview
When you open a data file or shift to viewing recorded data, the
Summary view appears. To activate this view, click the Summary
button in recorded data. Or, use the View > View Recorded >
Summary command.
azd227.png
Introduction
The Summary view is based on the European standard EN50160. The
purpose of the EN50160 report is to summarize the characteristics of
the supply voltage at the interconnecting point to the customer. The
EN50160 standard specifies the allowable level of a range of variables.
This standard measures the supply over a nominal sevenday period
azd228.jpg
the measured values) is read directly from the curve in the same way.
In this example, it exceeds the limiting value of 6 % of Un and the
standard is not met.
Depending on the measured variable, mean values for the various
measuring intervals (= interval length) must be measured (10second,
10minute, and 10hour aggregation), or single occurrences must be
recorded. These mean values or occurrences must be determined and
recorded depending on the measured variable during a certain
observation period (1 day, 1 week). The summary table shows the
measuring intervals and observation periods, which are specified by
the standard. After the measurements for an observation period are
taken, the respective occurrence probabilities must be determined by
using the stored measured variable, or continuous curve, as shown
above, and then compared with the limiting values of the standard.
Summary of EN50160 Values and Limits
Variable
Average
Period
Limit
Duration
50 Hz 1 %
50 Hz +4 / -6 %
Un = 10 %
Un + +10 % / -15 %
95 % of one week
100 % of one week
2h
PLT 1
95 % of one week
Frequency
10 s
Voltage
10 min
Flicker
Harmonics
10 min
8 %
95 % of one week
nd
same
2 %
same
3rd
same
5 %
same
4th
same
1 %
same
th
same
6 %
same
7th
same
5 %
same
9th
same
1.5 %
same
11th
same
3.5 %
same
13th
same
3 %
same
17th
same
2 %
same
19th
same
1.5 %
same
21st
same
0.5 %
same
same
1.5 %
same
same
0.5 %
same
25th
same
1.5 %
same
Unbalance
10 min
2 %
95 % of one week
THD
23rd
6th
..
24th
You can change the compliance limits, so this view can be useful
anywhere as an overview of voltage quality. See Limit Configuration
for Summary Views for more information.
Overview
The Overview display shows a bar chart for all recorded parameters.
azd227.png
Click on
to display the overview as a comprehensive table. Values
exceeding their limits are shown in red to clearly point out a power
quality problem.
azd262.png
Events
The Events display is a classification summary of the events that have
occurred during the duration of the recording under consideration. The
events are classified as swells, dips, short interruptions, long
interruptions, and impulses as described by the EN50160 standard.
The Events display provides simple counts of the classified events for
each power phase under consideration. For swells and dips, further
details include counts of each event type according to severity in
terms of magnitude and duration. For swells the duration classes are:
10 ms to 500 ms
500 ms to 5 s
5 s to 60 s
The magnitude classes are:
110 % to 120 % of nominal
>120 % of nominal
azd229.png
Harmonics
The Harmonics view is a summary of the measured harmonics over
the entire recording according to the limits defined by EN50160. Each
bar represents the 95 % value of measured harmonic, each of the
available measured phase harmonics is shown in a stacked spectral
format. The cursor tool is available to evaluate each of the individual
harmonics, in the example shown the cursor indicates that the 95 %
value of 21st harmonic for phase B as 0.20 % with the allowable limit
being 0.2 %. The 100 % value as 0.25 % exceeds the allowed limit
azd230.png
Click on
inside the Harmonics view to display a comprehensive table
of harmonics and THD. Values exceeding their limits are shown in red.
Tag for Report. Use this button to make a copy of the current
EN50160 chart to be used in generating a report.
azd254.png
Number
1
2
Description
Current used limit settings file. If Default limits are selected,
this field is empty.
The text box allows entering a description to the limit
settings. Use <CTRL>-<Enter> to add a new line.
These are the file operation buttons to load/save/save as the
limit settings for editing. The files have the extension *.ulf
(user limit file). The Default button sets the parameters back
to the limits used by the standard EN50160.
Limit configuration for the measurement parameters
Frequency, Voltage Variations, Harmonics, THD, Unbalance,
Flicker, Events, Interruptions and maximum number of
events.
To change limits
1. Press Open to load a user-defined limit file or press Default.
Default sets the values back to the limits according to the standard
EN50160.
2. Adjust the limit values as required. You may clear the limit values
for those parameters you do not want to observe. The only exceptions are the limits for Voltage Variations and Frequency which are
mandatory.
Note
The percentage of time for harmonics is identical to the
value configured for THD.
3. Store the limits with Save or Save As.
See Summary of EN50160 Values and Limits table for a list of values
that are defined by the EN50160 standard.
Volts/Amps/Hz View
Related topics
Adjusting Views and Graphs
Recorded Data Screen Overview
Working with Annotations
Selecting Split or Full View
Viewing Data as a Table
Scrolling the Data in the Graph
Graph Toolbars
The Volts/Amps/Hz view displays a top Reference graph that provides
an overview of volts, amps, and Hz for the recording period. A detail
graph on the bottom focuses on a subset of the data.
This is the first view you see when you open a recorded data file.
Information in this topic is presented in these sections:
Reference Graph
Detail Graph
View Controls
Reference Graph
The Reference graph shows a timeplot of volts, amps, and Hz for the
recorded period. You can adjust the of amount of data shown by
selecting specific phases, showing or hiding maximum and minimum
values, and displaying RMS, when it is available. (See View Controls,
below.) Use the selection cursors (1) in the Reference graph to select
what information shows in the Detail graph.
azd212.png
Graph title. The title shows what data is being graphed, and the date
and time range of the data shown.
X-Axes. The X-axis (horizontal) shows date and time intervals.
Y-Axes. The Y-axis (vertical) shows a voltage scale on the left, and
current and frequency scales when needed on the right.
Selection cursors. (Shown as "1" above.) The position of the two
vertical selection cursors mark what data displays in the Detail graph.
You can drag them to the left and right to adjust the selection. For
more information, see Selecting Data with Cursors.
Selection cursor labels. The date and time marked by each
selection cursor displays, and adjusts as the cursors are moved.
Annotations. If annotations were attached to the data by the
operator of the Recorder at an installation and "Annotations" is
checked in the View Controls, annotation markers appear on the
graph. You can click an annotation to see the text or the name of an
image or audio file. If a menu appears, choose Open Annotation. For
more information, see Working with Annotations.
Detail graph
The detail graph shows a detailed view of the portion of the data
marked by selection cursors in the Reference graph.
bae004s.png
Note
Another way of looking at this data is available on the
detail graph in the Events view.
This graph initially shows RMS data for the timeframe marked on the
Reference graph. If there is disturbance data included in the recorded
data, waveforms of the data are available. You can see them by
zooming in to a short-enough period of time (typically about .15
second or shorter). When the graph is zoomed in enough to show
waveform data, you can elect to also see RMS data as an overlay by
checking the RMS Overlay option in the view controls.
Tip: In order to see waveforms clearly in the VAH detail graph, you
may need to Auto Scale on the Y-axis.
Graph title. The title shows the type of graph, and the date and time
range of the data shown.
X-Axes. The X-axis (horizontal) shows time intervals.
Y-Axes. The Y-axis (vertical) shows volts on the left, and amps and
Hz on the right, when appropriate.
Measurement guides. Four measurement guides can be used to
measure specific data by dragging the guides across the graph. For
more information, see Measuring Data.
View Controls
Phase Selection. Specifies the type of data shown on the graphs.
Check or uncheck individual volts, amps, and Hz to change what data
is shown. The graph updates immediately to show your selection.
Voltage Reference. Selects the voltage reference to use when
displaying data. If you change the voltage reference, the labels in the
Phase Selection option will update to reflect it. The power configuration for the recorded data determines whether voltage initially
shows the voltage between phase and phase, phase and neutral, or
phase and ground.
Max/Min. Specifies whether maximum and minimum values are
shown on the Reference graph. Check or uncheck the box to change
this setting.
Annotations. Specifies whether annotations are displayed on the
Reference graph. Check or uncheck the box to change this setting. For
more information, see Working with Annotations.
RMS Overlay. When the detail graph is zoomed in enough to display
waveform data, this option lets you also display the RMS data as an
overlay, if desired. The check box for this option only becomes
enabled when you have zoomed in on the detail graph to the point
where RMS data is availabletypically when the X-axis is showing
intervals of .15 seconds or smaller.
Tag for Report. Use this button to flag the data shown for inclusion
in a report. A dialog box opens in which you can specify a label for the
data in the report. For more information, see Tagged Screen Report.
azd206.bmp
Note
If some checkboxes in the Phase Selection option are
grayed, it means they are not relevant for the data you
are viewing. For example, they may not be available for
the power configuration that was recorded (for
recorded data and snapshots), or that you are viewing
(for live data). The power configuration appears in the
status bar at the bottom of the screen.
When Max/Min is unchecked, the data shown in the graph is the 10minute average. While this provides a general picture of the data
shown, dips and swells may not always show up. Displaying Max/Min
values may allow you to see short-term variations that do not show up
with the average.
Tip: You can also display or hide Maximum values in the Harmonics
and THD views. For more information, see Showing Maximum Values.
How Max and Min are Derived
The maximum is the largest 200 ms RMS value measured during the
10-minute period. The minimum is the smallest 200 ms RMS value
measured during the 10-minute period.
Note
RMS is measured over a 10 or 12 cycle period, as
required by IEC 61000-4-30: exactly 10 complete
cycles for a 50 Hz power system, or exactly 12 complete cycles for a 60 Hz power system. Both are nominally 200 ms10*(1/50) = 0.2 and 12*(1/60) = 0.2
but if the frequency is slightly off then the period will
not be exactly 200 ms.
bae063s.png
A dialog box opens and indicates the exact date and time the
annotation was added. If it is a text annotation, the text is also
displayed.
If the annotation is associated with a file, such as an audio (.WAV)
or image (.jpg) file, the application associated with that file will
start and open the file. If the file is not in the default directory (My
Documents\PQ), a dialog box opens so that you can navigate to the
file.
Note
If clicking on an annotation marker does not seem to
do anything, the Zoom box is probably selected in the
graph toolbar, instead of the Select tool. Click the
Select tool
and then select the annotation.
To see overlapping annotations
Sometimes annotations are so close to each other that they actually
overlap on the Volts/Amps/Hz reference graph. When this is the case,
if you click on overlapping annotations, a menu opens and you can
select either Open, to open the annotation now on top, or Select
Next Overlapping Annotation, to bring the next one to the top.
To open the annotation now on top, choose Open.
To bring the next annotation to the top, choose Select Next
Overlapping Annotation. To then open that annotation, rightclick on it again and choose Open.
Tip: To see overlapping annotations more clearly on the Volts/Amps/
Hz reference graph, move the selection cursors so that they just
surround the area that contains the overlapping illustrations. (See
Selecting Data with Cursors.) The Detail graph adjusts, zooming in to
show the area between the selection cursors. You can now see the
annotations separately.
Inspecting Events
Related topics
Recorded Data Views
Recorded Data Screen Overview
Adjusting Views to See the Data You Want
The 1750 records both voltage and current disturbance data. You can
analyze (inspect) this disturbance data in the Events view.
When you first click the Events button, the Events view shows a
history of voltage events, plotted as a function of amplitude over start
time.
You can use this view to see details about a dip or swell that you
noticed on the Volts/Amps/Hz graph. For example, if you select
Current Events as the Event Trigger, you can then look for an event
associated with a motor starting or a load switching. No matter which
input channel triggered the event, activity on all channels of voltage
and current are saved in the disturbance data.
The top reference graph toggles to show either the Event History
graph or an Event Tolerance graph, showing events plotted as a
function of magnitude over duration.
The bottom detail graph shows detail about whichever event is
selected in the reference graph. When you first enter the view, the
first event is selected. You can click to select another, or step through
them sequentially using the Step Event tool.
For details about working with the Events view, see
Events View
Event Types
Selecting Event Triggers
Changing Event Detection Thresholds
Changing the Tolerance Curve
Creating and Editing a Custom Curve
Going to a Specific Event
Stepping Through Events
Events View
Related topics
Inspecting Events
Changing Event Detection Thresholdss
Creating and Editing a Custom Curve
Selecting Split or Full View
Viewing Data as a Table
Scrolling the Data in the Graph
azd222.bmp
Graph title. The title shows the type of graph, and the time range
over which data was collected.
X-Axes. The X-axis (horizontal) shows the duration of the event.
Y-Axes. The Y-axis (vertical) shows the percentage of nominal.
Tolerance Curve. The curve shown on the graph can be defined in
the View Controls. For voltage-triggered events, it is initially ITIC; for
current-triggered events it is a sample breaker curve.
azd223.bmp
The 100% point for the CBEMA and ITIC curves and the 0 point for the
ANSI curve are defined by the nominal voltage set in the Recorder
during monitoring. This value is shown in the Status bar at the bottom
of the screen.
Event Detail Graph
By default, the detail graph shows the first event in the data. To see
details about another event, select it in the Event Reference graph, or
use the Step Event buttons. The number of the event in view is
shown in the Event # box in the View Controls.
Note
Another way of looking at this data is available on the
detail graph in the Volts/Amps/Hz view.
If no events are detected, the detail graph is blank.
Initially, waveforms for a particular event are shown in the detail
graph. You can also display the RMS as an overlay on this graph, by
checking the RMS checkbox in the View Controls.
You can step through events using the Step Event tool at the bottom
of the view controls. For more information, see Stepping Through
Events. You can also go to a specific event by entering the number
and clicking Go To.
Graph title. The title shows the type of graph, the date and time of
the event, and the phase on which it occurred.
Measurement guides. Use the measurement guides to measure
specific data by dragging the guides across the graph. For more
information, see Measuring Data.
X-Axes. The X-axis (horizontal) shows the time range of the event.
Y-Axes. The Y-axis (vertical) shows volts on the left and amps on the
right, when appropriate to the data.
View Controls
Event View. Specifies whether the Reference Graph displays Event
Tolerance or Event History. The Tolerance format is the one shown
when you first enter the Event view.
Event Trigger. Specifies whether voltage-triggered events or
current-triggered events are displayed in the Event Reference graph.
Voltage events are shown when you first enter the Event view.
Event Detector button. Opens the Event Detector dialog box, where
you can set the thresholds that indicate whether a condition is
considered an event. For details, see Detecting Events.
Tolerance Curve. Specifies the type of tolerance curve shown on the
Event Reference graph. The curve you select will be saved with the
recorded data file.
For voltage-triggered events, available standard tolerance curves
include ANSI, ITIC, and CBEMA. In addition, you can create and use
custom curves. For details, see Creating and Editing a Custom Curve.
For current-triggered events, a sample breaker curve is shown, and
you can create and use custom curves.
RMS Overlay. On the detail graph, this option hides or displays an
overlay of RMS data in addition to the waveform data. Check the box
to display the overlay.
Annotations. On the detail graph, hides or shows any annotations
stored in the graph at the point of the event. Check the box to display
annotations.
Step Event buttons. These buttons let you step through events
available in the recorded data. From left to right, buttons are First,
Previous, Next, and Last.
As you step through events, details about the next event display in the
Detail graph, and the Reference graph updates to highlight the
selected event.
Tag for Report button. Use this button to flag the data shown for
inclusion in a report. A dialog box opens in which you can specify a
label for the data in the report. For more information, see Tagged
Screen Report.
Event Types
With Fluke Power Analyze, you define what constitutes an event after
the data is recorded by setting values with the Event Detector. The
1750 Power Recorder captures data on all channels and records
minimum, maximum, and average for 10 minute intervals. In
addition, when the 1750 sees increased disturbance activity
(transients, voltage dips and swells, outages, interruptions, and so
forth), it records at higher time resolutions so that your recorded data
file includes the information you need. This higher resolution data in
the 1750 is called disturbance data. The Event Detector defines signal
thresholds. If the recorded data falls outside of these thresholds, then
an event is said to have begun. The event ends when the recorded
data falls back within the Event Detector user set threshold.
Because you can set the threshold after data is captured, you can
make adjustments to this threshold as needed. The Event view
immediately updates to reflect any changes you enter in the Event
Detector dialog box. This has the effect of hiding or displaying events.
You do not have to worry about losing any disturbance data when you
change event trigger thresholds. The information is always there, and
can be displayed and hidden, and then displayed again.
You specify the thresholds used to determine how data is interpreted
and displayed as an event. In addition, you specify whether to detect
events on a per channel basis or by combining data across all
channels. This allows you to look for and isolate specific power quality
conditions. When you change the thresholds, the data is analyzed
again, and a new list of events is determined.
Example: Lets say you are responding to a complaint from a
restaurant that around 15:00 and 18:00 every weekday, electronic
kitchen equipment timers are being reset. The voltage recording from
this site is very noisy, and you cannot find anything unique to those
time periods. You gradually widen the thresholds, and as you do, the
event list gets smaller, leaving some events that appear only at those
times. The list now shows only the most severe disturbances, which
were the ones that caused problems to the kitchen equipment. Once
you inspect those events, you look for a similar pattern at the
substation, and find it coming from a corroded contact in a voltage
regulator.
Events View
Inspecting Events
Event Types
Events Detection Per Channel vs. Combined
Events are detected and displayed based on thresholds that are set
using the Event Detector. This is done in Fluke Power Analyze after
data is collected. This topic describes how to change the event
detection thresholds and re-detect events. For additional information
about how event data is gathered and defined, see How Events are
Calculated.
When you change the Event Detection values, the new settings are
saved with the recorded data file. This allows someone else to open
the file using a different version of Power Analyze and see the same
events, without having to again specify the event definitions.
To change event detection thresholds in the data
1. Display the Events view.
When you first display the Events view, voltage-triggered events
are shown.
If you want to show current-triggered events, change the Event
Trigger option in the view controls to "Current Events." (Currenttriggered events automatically capture inrusha sudden rise in the
% or current on a current phase.)
2. Click the Event Detector button to open the Event Detector dialog
box.
The contents of the dialog box vary, depending on whether you are
viewing voltage- or current-triggered events.
azd225.png
Event Types
Related topics
Inspecting Events
Events View
Viewing Data as a Table
Swell
Per Phase: A swell begins when the VRMS voltage rises above the
swell threshold, and ends when the VRMS voltage is equal to or below
the swell threshold minus the hysteresis voltage. Each phase is
monitored individually. The maximum swell magnitude voltage is the
largest VRMS value measured on this channel during the swell.
Combined: A swell begins when the VRMS voltage of one or more
channels is above the swell threshold and ends when the VRMS voltage
on all measured channels is equal to or below the swell threshold
minus the hysteresis voltage The maximum swell magnitude voltage is
the largest VRMS value measured on this channel during the swell.
Interruption
Per Phase: A voltage interruption begins when the VRMS voltage falls
below the voltage interruption threshold and ends when the VRMS
value is equal to, or greater than, the voltage interruption threshold
plus the hysteresis.
Combined: A voltage interruption begins when the VRMS voltages of
all channels fall below the voltage interruption threshold and ends
when the VRMS voltage on any one channel is equal to, or greater
than, the voltage interruption threshold plus the hysteresis.
Note
In Power Analyze the hysteresis is 2 % and the interruption limit is 5 % of the nominal voltage.
Type
Phase
t1
Dip
A/L1
t2
Interruption
B/L2
t3
Interruption
C/L3
t4
Interruption
C/L3
t5
Interruption
A/L1
t6
Interruption
B/L2
Type
Phase
t1
Dip
A/L1
t2
Dip
B/L2, C/L3
t3
Dip
t4
Interruption
Note
Event t2 is not an interruption because only B/L2 and
C/L3 are below the interruption limit.
Event t4 does not interrupt event t3. Event t3 ends
when all three phases are back to normal.
Inspecting Events
You can view events triggered by either voltage or current in the Event
View.
To toggle between them, select an option under Event Trigger in the
View Controls.
Note
Regardless of whether you view voltage- or currenttriggered events, you can still turn on and off the display of both voltage and current phases. For example,
you can still see what was occurring on Phase B current
when viewing a voltage event.
When you first click the Harmonics button for recorded data, the
Harmonics view shows the first 20 bars of the averaged voltage
harmonic spectrum for the entire recorded period in the top reference
graph, and a timeplot of a selected harmonic in the detail graph.
You can scroll the graph to see additional harmonics, or use
Auto Scale to see the entire 50 at one time.
This view gives you an impression of harmonic magnitudes over the
whole recorded period, and lets you isolate a harmonic order to track
over the whole recorded period.
You can switch the display in the reference graph to display the
current harmonic spectrum by selecting an option in the View
Controls.
For details about working with harmonic summaries, see
Harmonic Summary View
Selecting Channels to View
Showing or Hiding Interharmonics
Showing Maximum Values
Detail Graph
View Controls
Note
The harmonic magnitudes are calculated using harmonic groups according to IEC 61000-4-7.
Reference Graph
When you first display the Harmonics Summary view, the Reference
graph shows a bar graph of the voltage harmonic spectrum for the
entire period of time in the recorded data file. These represent the
averaged harmonic amplitudes. Initially, the first 20 harmonics
display; you can scroll the graph to bring more into view, or use
Auto Scale to see all 50 at once. The 0th harmonic shows the DC
component and the 1st harmonic is the fundamental component.
Up to four bars display for each harmonic, depending on which
channels are selected in the Phase Selection control (AN, BN, CN, NG
volts, or A, B, C, N amps). If you display Interharmonics, you will see
up to eight bars.
You can switch between displaying voltage and current harmonics,
and you can adjust the amount of data shown by selecting specific
phases, selecting what scale to use for the Y Axis, and showing or
hiding interharmonics and maximum values. (See View Controls,
below.)
Graph title. The title shows the type of graph, and the date and time
range of the data shown.
Selection cursor. On the Harmonic Summary graph, there is only
one selection cursor. As you move the cursor across the harmonics, it
displays the order of the harmonic, and updates the detail graph. If
you have trouble selecting a specific harmonic, try zooming in first.
For more information, see Zooming In and Out and Selecting Data
with Cursors.
Selection cursor label. A label for the selection cursor shows the
amplitude of the harmonic.
X-Axes. The X-axis (horizontal) shows the order of the harmonic, 0
(the DC component), and from 1 (the fundamental frequency) to 50
(50 times the fundamental frequency).
Y-Axes. The Y-axis (vertical) shows % of fundamental, Peak, or RMS,
depending on the "View As" selection.
Detail Graph
The Detail graph in the lower half of the screen shows a long-term
summary (trend) over time for the individual harmonic or
interharmonic that is selected in the Reference graph. Phases can be
turned on or off with the phase selection check boxes in the View
Controls.
Graph title. The title shows the type of graph, the order of the
harmonic or interharmonic shown, and the date range.
Measurement guides. Use the four measurement guides to measure
the harmonic by dragging the guides across the graph. For more
information, see Measuring Data.
X-Axes. The X-axis (horizontal) shows time intervals.
Y-Axes. The Y-axis (vertical) shows volts or amps.
View Controls
Phase Selection. Specifies the type of data shown on the graphs.
Use the radio buttons at the top to select whether Voltage or Current
harmonics are shown. As you switch between voltage and current, the
appropriate checkboxes activate. You can check or uncheck individual
volts or amps to change what data is shown. The graph updates
immediately to show your selection.
View As. Selects the format of the graphs, altering the Y-axis
(vertical) to show the selected type: % of Fundamental (the
Fundamental is harmonic # 1), Peak (square root of 2 times the
amplitude), or RMS (averaged RMS amplitude).
Interharmonics. Specifies whether interharmonics are shown. When
interharmonics are shown, frequency ranges from the selected
harmonic to the next are included in the magnitude calculation. The
interharmonics appear next to the harmonics, allowing for side-byside comparison. This reveals if there are superimposed sinusoidal
signals that are not integer multiples of the fundamental frequency.
Check or uncheck the box to show or hide interharmonics.
Note
When interharmonics are enabled, harmonics are calculated using harmonic subgroups.
Max. Specifies whether maximum values are shown on the graphs in
addition to the averaged harmonic amplitudes. Displaying maximum
values can help to identify conditions that you might not see when
only averages are shown. For example, if there was a spike, you might
only see it if you display the Maximum. Check or uncheck the box to
show or hide the maximum values.
On the upper harmonic bar graph, maximum is the maximum RMS
amplitude over the recorded period, shown as a gray bar extending
past the RMS amplitude bar.
On the lower detail waveform graph, the maximum is the maximum
RMS amplitude during the 10-minute aggregated trend data point
period.
Tag for Report. Use this button to flag the data shown for inclusion
in a report. A dialog box opens in which you can specify a label for the
data in the report. For more information, see Tagged Screen Report.
Suppression of Harmonics
A data point of an individual harmonic is not displayed when the
amplitude of the fundamental at this time is too low and the values are
shown as % of fundamental. Switch to RMS or Peak for measurement
values of this data point.
For more information, see Suppression of Fundamental-Based Values.
Note
When interharmonics are enabled, harmonics are calculated using harmonic subgroups
To show interharmonics
Check the Interharmonics box on the View Controls.
To hide interharmonics
Uncheck the Interharmonics box on the View Controls.
THD View
Related topics
Adjusting Views and Graphs
Recorded Data Screen Overview
Suppression of THD
A data point of THD in reference graph is not displayed when the
amplitude of the fundamental at this time is too low. In this case, the
harmonics bar graph is not shown when the y-axis of the detail graph
shows % of Fundamental.
You can use the selection cursor in the THD view to see the associated
harmonic bar graph in detail view when RMS or Peak is selected in
the View as option.
For more information, see Suppression of Fundamental-Based Values.
Viewing Flicker
Related topics
Recorded Data Views
Recorded Data Screen Overview
Adjusting Views to See the Data You Want
Flicker is quantified in Power Analyze according to the international
standard IEC 61000-4-15. This function quantifies rapidly fluctuating
voltages propensity to cause visible flickering of electric lights. Typical
causes of flicker are arc furnaces and large synchronous motors
starting, stopping, and jamming.
When you first click the Flicker button, the Flicker view shows a
timeplot of short term (10 minute) and long term (2 hours) perceptibility units over time for the full recorded period in the reference
graph, and a detail graph zoomed in on part of that data. These are
referred to as short term Flicker (Pst) and long term Flicker (Plt).
For details about working with this view, see:
Flicker View
Selecting Channels to View
Showing or Hiding Pst and Plt
Flicker View
Related topics
Adjusting Views and Graphs
Recorded Data Screen Overview
azd226.png
Graph title. The title shows the type of graph and the date and time
range of the data shown.
X-Axes. The X-Axis (horizontal) shows date and time intervals.
Y-Axes. The Y-Axis (vertical) shows perceptibility units on the left,
from 0 to 10.
Selection cursors. The position of the two vertical selection cursors
mark what data displays in the detail graph. You can drag them to the
left and right to adjust the selection. For more information, see
Selecting Data with Cursors.
Selection cursor label. A label for each cursor shows the magnitude,
date, and time at that location, and adjusts as you move the cursors.
You can also click on the graph and the nearest cursor snaps to it
(arrow button must be selected).
Detail Graph
The detail graph shows a zoomed portion of the reference graph. You
can zoom in further on the data by using the Zoom box tool. For more
details, see Zooming In and Out on Graphs.
Graph Title. The title shows the type of graph, and date and time
range of the data shown.
X-Axes. The X-axis (horizontal) shows time intervals.
Y-Axes. The Y-axis (vertical) shows perceptibility units.
Measurement guides. Four measurement guides can be used to
measure specific data. For more information, see Measuring Data.
Measurement labels. These labels shows the measurement between
the horizontal and vertical measurement guides. They update as you
move the guides.
View Controls
Phase Selection. Specifies the phases for which voltage is shown on
the graphs. Check or uncheck individual phases to change what data is
shown. The graph updates immediately to show your selection.
Pst. Shows or hides Pst on both reference and detail graphs.
Plt. Shows or hides Plt on both reference and detail graphs.
Tag for Report. Use this button to flag the data shown for inclusion
in a report. A dialog box opens in which you can specify a label for the
data in the report. For more information, see Tagged Screen Report.
Demand Period. Sets the period over which Power and Energy
values will be averaged. Available choices are 10, 15, 20, and 30
minutes. If a 15-minute interval is not shown in the list, this interval is
not supported by the firmware used to record the data. Update the
instrument firmware to the latest available version.
Max/Min. Specifies whether maximum and minimum values are
shown on the summary graph. Check or uncheck the box to change
this setting.
Power Data Type. Determines whether the lower portion of the view
displays a table of Power data or a graph of Energy.
Tag for Report. Use this button to flag the data shown for inclusion
in a report. A dialog box opens in which you can specify a label for the
data in the report. For more information, see Tagged Screen Report.
azd231.png
Viewing Snapshots
Related topics
Snapshot Screen Overview
on the toolbar.
Snapshot Views
Related topics
Working with Snapshots
Snapshot Screen Overview
Taking a Snapshot Manually
Setting Automatic Snapshot Frequency
Viewing Snapshots
Moving Through Snapshots
Overview of the Power Analyze Screen
Adjusting Views and Graphs
Snapshot views show what the recorded power quality data looked like
at specific intervals. These views look very similar to the Live 1750
views. An extra tool at the top of the windowa Slider Barprovides a
way for you to select the point in time for which you want to see a
snapshot.
Five snapshot views are available:
Scope
Phasor
Meter
Harmonics
Power
You switch between these graphs by clicking the view buttons at the
top of the window.
azd248.bmp
bae044s.gif
Press and drag the slider bar to the point in time for which you
want to see power conditions.
The snapshot data closest to this point in time is shown in the
Snapshot view.
bae075s.gif
View Controls
Next/Previous buttons. Lets you move from one snapshot to the
next.
Phase Selection. Specifies the type of data shown in the view. Check
or uncheck individual volts and amps to change what data is shown.
The graph area updates immediately to show your selection.
Phasor Scale. This control lets you scale the length of the
vectors to see them more clearly. For example, if the vectors shown
are quite short, you can increase their length. To adjust the vectors,
click the up or down arrows for voltage or current vectors.
The default current scale is based on the maximum of the CT range
detected when the data was recorded. The default scale for voltage
vectors is the nominal voltage. You can see the nominal voltage in the
status bar; you can check the detected CT range on the View Settings
screen.
Power
kW (kilowatts)
kVA (kilovolt Ampere)
kvar (kilovolt Ampere Reactive)
PF (Power Factor). kW/kVA of full power
DPF (Displacement Power Factor or cos ). kW/kVA of fundamental
Note
If one or more of the CF, % THD, % TDD, K-Factor, PF
or DPF values show --, the amplitude of either voltage
current or power is too small to show useful values. For
more information, see Suppression of FundamentalBased Values.
View Controls
Next/Previous buttons. Lets you move from one snapshot to the
next.
Max Demand Load Current. Enter a value for the maximum
demand. This is used to calculate % TDD for Current. This value also
displays and can be changed on the Live Harmonics view.
Note
The harmonic magnitudes are calculated using harmonic groups according to IEC 61000-4-7.
Harmonics Bar Graph
Initially the Snapshot Harmonics bar graph shows the voltage
harmonic spectrum. This represents the averaged harmonic
amplitudes at the moment of the snapshot. Initially, the first 20
harmonics display; you can scroll the x-axis to bring harmonic # 21 to
50 into view, or use Auto Scale to see all 50 at once.
Up to four bars display for each harmonic, depending on which
channels are selected in the Phase Selection control (AN, BN, CN, NG
volts, or A, B, C, N amps). If you display Interharmonics, you will see
eight bars.
You can switch between displaying voltage and current harmonics,
and you can adjust the amount of data shown by selecting specific
phases and showing or hiding interharmonics and maximum values.
(See View Controls below.)
Graph title. The title shows the type of graph, and the date and time
range of the data shown.
X-Axes. The X-axis (horizontal) shows the order of the harmonic,
from 0 (dc signal), 1 (the fundamental frequency), to 50 (50 times the
fundamental frequency).
Y-Axes. The Y-axis (vertical) shows the averaged amplitude of the
harmonic, either voltage or current, depending on which harmonics
are selected under Phase Selection.
Digital Readout of Harmonics-Related (Distortion) Data
The table in the Snapshot Harmonics view includes the following data:
Voltage
% THD (Total Harmonic Distortion)
Odd Harm
Even Harm
Current
% THD (Total Harmonic Distortion)
Odd Harm
Even Harm
Downloading Data
When you are connected to a 1750 Power Recorder, you can view live
data showing the power conditions at the site where the Recorder is
installed. This Power Analyze display is updated 4 times per second
with revised information received from the Recorder.
To view live data
1. Make sure the name of the Recorder you are working with shows in
the List of Recorders.
2. Click the 1750 Live button.
3. If you are prompted for a password, enter it.
Fluke Power Analyze automatically displays the Scope view.
4. If you are setting up the Recorder, you can make sure the monitoring settings are correct and make any necessary changes by clicking 1750 Setup. When you are finished, click Apply and then
return to the 1750 Live views.
If you want to analyze data that has already been captured in the
1750, start by downloading it, and then use the recorded data views.
You switch between these graphs by clicking the view buttons at the
top of the window.
azd248.bmp
The file name you specified is inserted into the data and associated
with the present date and time (and therefore the present power
measurements).
6. If you are using the PDA, move the image or audio file to a location
that will make it easier to move it to a PC later, when you download
and move the recorded data file to your PC. You can accomplish
this in two ways:
Place the file into the synchronization folder on your PDA, so
that it will be automatically transferred into the sync folder on
the PC the next time you dock the PDA.
You may find this approach useful if you download data using
Power Analyze on your PC. After synching the files from your
PDA, be sure to move the annotation files into the folder that
contains your .odn files (by default, \My Documents\PQ).
Transfer the file onto an SD card for later transfer to your PC.
If you use the PDA to download data to an SD card, copying the audio or
image files to the SD card may be the easiest method; then you can copy all
associated files to your PC at once. Be sure to copy the files into the same
folder that contains the downloaded .odn file.
azd234a.png
Number
1
Description
Graph toolbar. Provides access to the Zoom tool, so that you
can show and hide the guides.
4
5
6
Digital read of volts and amps. The boxes at the top of the
main data area provide an instantaneous digital reading of
the volts and amps.
Scope data. The scope waveforms are shown in the main
data area. The View Type option in the View Controls side bar
allows you to switch the display from Overlaid to Stacked.
This lets you view phase waveforms overlaid on the same
graph, or separately, in three stacked graphs. You can also
change the graph type to view trend data, like a strip chart.
View controls. Specify what data to display in the view, and
how it should appear. For details, see Scope View.
1750 setup details in the status bar. Shows the Recorder
name, IP address, power configuration, nominal voltage, and
frequency, as specified in the 1750 Setup.
Connected Recorder. Shows the name of the Recorder to
which you are connected.
Scope View
Related topics
Adjusting Views and Graphs
Live View Screen Overview
Overview of the Scope Screen
Viewing Stacked Waveform Graphs
Viewing Scope Data as a Trend (Strip Chart)
The Scope view shows voltage and current waveforms showing 4
cycles of waveforms, and digital display of instantaneous values for
volts, amps and frequency.
Note
On the PDA, you will see 1-1/2-cycles of waveforms.
Graph Area
You can view the data as a Waveform or as Trend data by changing
the Graph Type in the View controls. (Note that when you use the
Fluke Power View on the PDA, this data is represented on two different
graphs: Scope and Trend.)
You can view all data traces overlaid on one graph, or you can view
the phases on stacked graphs, by changing the View Type.
Digital Display. The background of the digital display uses the same
color for each phase as the trace lines.
X-Axis. The X-Axis shows milliseconds in the initial view and in the
stacked waveform graphs. In stacked trend graphs, the X-axis shows
date and time.
Y-Axis. The Y-Axis shows Volts on the left, and Amps on the right.
View Controls
Phase Selection. Specifies the type of data shown on the graphs.
Check or uncheck individual volts and amps to change what data is
shown. The graph updates immediately to show your selection.
Voltage Reference. Selects the voltage reference to use when
displaying data. If you change the voltage reference, the labels in the
Phase Selection option will update to reflect it. The power configuration for the recorded data determines whether voltage initially
shows the voltage between phase and phase, phase and neutral, or
phase and ground.
View Type. Specifies whether waveforms are shown on one graph,
overlaying each other, or are shown on three stacked graphs, with one
phase per graph. (This control is only available when the Graph Type
is Waveform.)
Graph Type. Specifies whether stacked graphs display waveform or
trend data.
Trend data displays the selected phases of voltage or current as it
would appear in a strip chart. This moment in time is the right side of
the graph. The traces fill the display in 10 minutes, and continue FIFO
(first in first out). This feature provides a picture of the short-term
stability of the power system.
You can only change this setting when the View Type is Stacked.
azd235.png
azd236.png
Phasor View
Related topics
Adjusting Views and Graphs
Live View Screen Overview
Using the Phasor Diagram to Assess Connections
Swapping Phase-Input Connections and Inverting Current Input
You access the Phasor view by clicking the Phasor button on the View
toolbar.
The Phasor view displays a diagram showing voltage and current
amplitudes and phase angles. Voltage is shown with solid arrowheads,
while current is shown with hollow arrowheads. Voltage unbalance is
also included in the measurements table at the left.
Note
If either the unbalance or the angle of one of the
phases displays -- and the arrow is not visible, the
amplitude is too small to show useful values. For more
information, see Suppression of Fundamental-Based
Values.
You can use this view to verify proper test lead and current probe
connections when you are setting up a Recorder. For details, see Using
the Phasor Diagram to Assess Connections.
Graph Area
The diagram at the right of the window is a phasor diagram for the
selected phases. The values in the table to the left of the graph show
the amplitude and phase angle for each vector.
azd237.png
View Controls
Phase Selection. Specifies the type of data shown in the view. Check
or uncheck individual volts and amps to change what data is shown.
The graph area updates immediately to show your selection.
Phasor Scale. This control lets you scale the length of the
vectors to see them more clearly. For example, if the vectors shown
are quite short, you can increase their length. To adjust the vectors,
click the up or down arrows for voltage or current vectors.
The default current scale is based on the maximum of the detected CT
range. The default scale for voltage vectors is the nominal voltage.
You can see the nominal voltage in the status bar; you can check the
detected CT range on the 1750 Setup screen. If you make a change to
the Voltage/Current ratios on the 1750 Setup screen, that change is
reflected here.
Meter View
Related topics
Adjusting Views and Graphs
Live View Screen Overview
You access the Meter view by clicking the Meter button on the View
toolbar.
The 1750 Live Meter view provides a digital reading of all of the live
data.
Note
Current TDD is calculated based on a user-entered
value in the View Control Max Demand Load Current.
You can enter or change this value on the 1750 Live
Meter view or the 1750 Live Harmonics view. The values in the %TDD row will be blank until you enter this
value.
Table of Phases and Meters
The table in the Meter view includes the following data:
Voltage
RMS (Root Mean Square)
Pk (Peak)
CF (Crest Factor)
% THD (Total Harmonic Distortion)
Frequency
Current
RMS (Root Mean Square)
Pk (Peak)
CF (Crest Factor)
% THD (Total Harmonic Distortion)
% TDD (Total Demand Distortion). Displays after Max Demand
Load Current has been entered in the View Controls.
K Factor
Power
kW (kilowatts)
kVA (kilovolt Ampere)
kvar (kilovolt Ampere Reactive)
PF (Power Factor). kW/kVA of full power
DPF (Displacement Power Factor or cos ). kW/kVA of fundamental
Note
If one or more values of CF, % THD, % TDD, K-Factor,
PF or DPF show --, the amplitude of either voltage current or power is too small to show useful values. For
more information, see Suppression of FundamentalBased Values.
View Controls
Max Demand Load Current. Enter a value for the maximum demand.
This is used to calculate % TDD for Current. This value also displays
and can be changed on the Live Harmonics view.
azd260.png
The items for reporting relate to the items that are usually viewed in
the main software package.
Report Configuration
On starting Auto Report the Report Configuration tool appears. The
tool is divided into sections which relate to each of the views in the
main analysis software:
Summary
Volts / Amps / Hertz
Events
Harmonics Bar graphs and Time plots
THD
Flicker
Power / Energy
Date range
Time plot split
Load / Save configuration report
In addition there are some Common Settings. The common settings
are used for:
Defining the start and end dates and times of the report.
Selection of the types of graphs that are reported; a graph of the
entire data set may be reported or this can be split in to hourly,
daily or weekly sections to give higher resolution data.
azd261.png
Tagged Screens
Related topics
Tag for Report dialog box
Report Writer dialog box
You can build a report by tagging specific data you see on the screen
in the View Recorded and Snapshot modes. You can tag as many
different views as you want before creating the report. Power Analyze
remembers what you have tagged until you exit the application, or
until you generate a report. If you tag more than you need, it is easy
to unselect tagged items before you actually generate the report.
Note
To make use of the reporting feature in Power Analyze,
you must have Microsoft Word 2000 or later installed
on your computer.
To include data in a report
1. Get the screen to look just the way you want.
Power Analyze will capture the contents of the main area just as
you see it. Use any of the toolsview controls, zoom features,
split/full screen, and so forthto adjust the display.
2. Click the Tag for Report button at the bottom of the View Controls.
In the dialog box that displays, enter a heading to identify the data.
This heading will appear in your report. By default, Power Analyze
inserts the name of the active view. You can change this heading to
be more specific.
3. Click OK.
4. Continue working, tagging additional screens when you want to
include them.
To create the report
1. When you are ready to create the report, choose File > Report
Writer.
A dialog box lists the items you have tagged.
2. Review the list of items to be included in the report. You can use
Ctrl+click to unselect or select them.
3. Open the application into which you want to paste the graph and
click the Paste button or choose Paste from the Edit menu.
Downloading Data
Related topics
Connecting to a 1750 Power Recorder
Working with Annotations
Download dialog box
Working with Recorded Data Files
After a recording session is complete, you download data from the
internal memory of a 1750 Power Recorder to an SD storage card
using the PDA and Fluke Power View or to your computer using Fluke
Power Analyze.
Normally, you would use Power View on the PDA (Data > 1750
Internal Memory) to download data to an SD storage card in the
Recorder, then move the card to the PDA for easy transport, and then
move it to your computer, where you can open the recorded data file.
If you are connected to a Recorder or have Recorders that are hooked
up to an IP network, the download feature is also available within
Fluke Power Analyze.
Note
After you download the data you want from the
Recorder and have confirmed that the data is intact, if
you are finished recording data at that location, you
can clear the Recorder internal memory to prepare the
Recorder for future use. (This is optional.) For details,
see Erasing Data from the 1750 Memory.
When you download through Power Analyze, a reference graph
provides you with an overview of the data in the Recorder. Selection
guides are available to help you determine and indicate exactly what
you want to download. In addition, if annotations were saved with the
data, you can use them to help select what to download.
Before you start
1. Make sure you are connected to the 1750 Power Recorder from
which you want to download.
The name of the Recorder to which you are presently connected or
about to be connected displays just below the main toolbar.
To connect to a different Recorder, select it in the list.
If you use the PDA and Fluke Power View to download data to the SD
storage card in the Recorder, you will need to move the SD card to an
SD card reader attached to your computer or on your network. Then
you can access the recorded data using Fluke Power Analyze. The
procedure below shows a typical way to do this, using the docking
station that came with your PDA instead of a separate SD card reader.
Tip: If your computer is connected to the Recorder directly or over the
network, you can download the data directly to your computer instead
of to the SD Storage card.
To move the downloaded data from an SD card to your PC
1. Download the data to the SD storage card.
2. Remove the SD storage card from the Recorder.
3. Insert the SD storage card into the top of the PDA, for easy transport.
4. At your office, put the PDA into its docking station.
5. On your PC, open the card as a drive. (The card should display as a
drive in the My Computer folder.)
6. Copy the files from the PDA to the desired location on your computer.
You are now ready to open the recorded data files in Fluke Power
Analyze.
bae082s.png
Available 1750 Power Recorders are listed in the drop-down list. Power
Analyze browses the network at regular intervals to keep the list up to
date. If the name is preceded by an asterisk (*), it means the
Recorder is password protected.
You can connect to any of the Recorders listed by selecting one from
the list. If you are in 1750 Live Mode, you see values being measured
by the selected recorder. If a password is associated with the
Recorder, you will be prompted to enter the password before you can
see the data or change the 1750 Setup for the unit.
If you do not see the Recorder to which you want to connect in the list
you can add it if you know the IP Address or DNS Name. This can be
useful if the Recorder is on a different subnet, which the browse
capability cannot reach.
To connect to a different Recorder
Select the desired Recorder from the drop-down list under the main
toolbar.
To add a Recorder to the list of available recorders
1. Select <New/Edit> from the drop-down list of Recorders under
the main toolbar.
2. In the New/Edit List of Recorders dialog box, enter the IP Address
or DNS Name for the Recorder.
Note
If you enter a DNS Name, make sure it has been associated with a Recorder and listed in the network DNS
name table; otherwise Power Analyze will not be able
to find the Recorder. For assistance, contact your network administrator.
3. Click Add.
For details about the fields, see 1750 Measurement Setup and
1750 Instrument Setup.
Settings you can view or change on the Measurement tab include:
Measurement Description
Power Configuration
Nominal Voltage (V RMS)
Nominal Frequency (Hz)
Phase Connections
Voltage/Current Ratios
Snapshot Interval
Settings you can view or change on the Instrument tab include:
Recorder Name
1750 Clock
Network Address
Password
Current Probe Detect
3. When you are finished, click Apply to send the settings to the
Recorder.
The exception to this is when you are setting the 1750 clock. To
change the clock, click on Sync. to PC or Edit, enter the date and
time, and click Set Clock.
4. When a message tells you that the changes have been made successfully, click OK.
Note
Be sure to wait for the confirmation message before
you leave this screen. Otherwise some of your changes
might be lost.
5. Verify that the setup matches the physical installation.
6. (Optional) If desired, you can clear the memory of the Recorder, so
that all data that is recorded for this connection uses the same settings. For details, see Erasing Data from the 1750 Memory.
azd203.png
azd257.png
Use the settings on this screen to set up the 1750 Power Recorder for
the specific site at which you will be monitoring power quality
conditions.
Recorder Name. Enter or change the name for the 1750 Power
Recorder (up to 28 characters).
1750 Clock. The time now in the Recorder displays here. To set the
clock in the Recorder, click on Sync to PC to automatically
synchronize the Recorder time to the PC time, or click on Edit to enter
the date and time manually. Enter the date and time and click Set
Clock.
Network Address. You can specify what network address to use
when communicating with this Recorder. You can have the address be
obtained automatically over the network, or you can enter a specific
address here. If you need assistance determining the network
address, contact your IT or network administrator.
Current Probe Detect. Displays the values of attached current
probes. (The Recorder automatically detects these values.) You can
override these values by changing the Voltage and Current Ratios.
Click on Edit and enter the appropriate date and time in the 1750
Clock fields and click Set Clock. Power Analyze sends the date and
time to the Recorder.
Click Sync. to PC to synchronize the Recorder time with the PC time.
Wiring Diagrams
Related topics
Setting up the 1750 Power Recorder
1750 Setup Screen
Wiring diagrams are available in the 1750 Power Recorder
Operator Guide, which is included on the CD that came with your
Recorder. In that manual you will find a wiring diagram for each of the
available Power Configurations:
1 with Neutral
1 IT No Neutral
1 Split Phase
3 Wye
3 Delta
3 IT
3 High Leg
3 Open Leg
2 Element Delta
2-1/2 Element Wye
connected to the wrong wire. For example, in the image below, B and
BN are at approximately 120, while C and CN are at approximately
236, indicating an incorrect hookup.
In this case, you can use the 1750 Setup screen to electronically swap
connections. For more information, see Swapping Phase-Input
Connections and Inverting Current Input.
Voltage and Current Phase Vectors Oppose Each Other
When CTs (current transformers, or clamps) are connected correctly,
the current and voltage phasors for a given phase should be near each
other on the Phasor diagram (within 0 to 45 degrees). If the current
phase and voltage phase vectors appear to be in opposite directions of
each other, the CT is upside down. This can also be verified physically,
because the arrow on the CT will be pointing the wrong direction
(away from the load, such as a motor or arc welder).
To correct the situation, check Invert box for that phase in the 1750
setup swap connections. This may also be referred to as "reversing the
polarity."
Overlapping Phases
If two phases are overlapping in the Phasor diagram, two voltage
probes are connected to the same phase. This error can only be
changed by physically connecting the voltage probes to different
phases.
Note
Make every attempt to correct such an error before you
begin recording data.
You can use the Swap Connections feature on the 1750 Setup
screen to make an internal correction to how connections have been
made. That way you do not have to change the physical connections
to the power system. You can make the following types of changes:
Swap the phase-input connection for any voltage or current input
Invert any current input clamp
To determine whether you need to swap phases, see Using the Phasor
Diagram to Assess Connections.
To swap phase-input connections
1. Make sure you are connected to the appropriate Recorder.
2. Using the diagram on the Phasors view, identify what phase has
been incorrectly connected.
3. On the 1750 Setup screen, navigate to the Measurement tab.
4. In the Swap Connections area, locate the row for that channel.
The labeled squares in the Instrument section are individual buttons.
azd240.png
5. Click the appropriate buttons for the phase-input settings you want
to change.
For example, if the voltage probe for phase A is inadvertently
connected to the B input, phase B is connected to the C input, and
phase C is connected to the A input, this can be corrected by
indicating those connections in the Swap Phases control, as shown
below.
azd241.bmp
azd242.bmp
5. When you are finished making changes to the 1750 screen, click
Apply.
6. Return to the Phasor View and confirm that the vectors on the Phasor diagram appear as they should.
Troubleshooting
About the Communications Log
Viewing Log Files
Technical Support
If Fluke Technical support asks you to open this log, you can do so.
To view the communications log
1. Choose Tools > Display Comms Log.
The Comms Logger window opens in the background.
2. Navigate to the Logger window.
Technical Support
To contact Fluke, call:
1-888-993-5853 in USA
1-800-363-5853 in Canada
+31-402-678-200 in Europe
+81-3-3434-0181 in Japan
+65-738-5655 in Singapore
+1-425-446-5500 from anywhere in the world
Or, visit Flukes Web site at www.fluke.com
To register your product, visit register.fluke.com
Reference Topics
Reference topics provide information about different parts of the Fluke
Power Analyze application, including:
Button Bars
Toolbars and Toolbar buttons
Menus and Commands
Views and View Elements
View Settings Screen
Dialog Boxes
Many of these topics can be displayed through context-sensitive help
as you work with Fluke Power Analyze. That is, you can click the Help
button
List of Recorders
Related topics
Connecting to a 1750 Power Recorder
When you are connected to a 1750 Power Recorder, its name shows in
this field. If there are other 1750s on your network, you can connect
to them by selecting them from this drop-down list.
When a recorder has a password associated with it, an asterisk
displays in front of the name.
bae024s.png
azd247.png
bae024s.png
The snapshots shown are for the recorded data file named in the title
bar. If you want to see snapshots from a different file, use the File >
Open command or select a recently used file from the bottom of the
File menu.
THD Command
Related topics
THD View
Displaying Different Views
Use the View > View Recorded > THD command to view voltage or
current Total Harmonic Distortion (THD).
This command is also available by clicking the THD button on the View
toolbar.
Use the View > View Recorded > Harmonics command to view
harmonic summaries in the recorded data file.
This command is also available by clicking the Harmonics button on
the View toolbar.
Flicker Command
Related topics
Flicker View
Displaying Different Views
Use the View > View Recorded > Flicker command to view flicker
in the recorded data file.
This command is also available by clicking the Flicker button on the
View toolbar.
Summary Command
Related topics
Summary View
Displaying Different Views
Use the View > View Recorded > Summary command to view the
Quality of Service (QoS) summary for the recorded data file.
This command is also available by clicking the Summary button on
the View toolbar.
Use the View > View Snapshot > Meter command to view
snapshots of the meter data saved in the recorded data file.
This command is also available by clicking the Meter button on the
View toolbar in the Snapshot mode.
Events Command
Related topics
Events View
Displaying Different Views
Use the View > View Recorded > Events command to view events
in the recorded data file.
This command is also available by clicking the Events button on the
View toolbar.
File Menu
The File menu includes the commands listed below. For details, click
the command name.
Open
Close
Auto Report
Export to Excel
Exit
Tools menu
Window menu
Help menu
Main Toolbar
Related topics
Graph Toolbars
The main toolbar includes standard Windows tools and some
specialized for working with Fluke Power Analyze graphs.
Tip: The tools on the main toolbar all have a corresponding topic on a
menu.
azd252.png
6. Bottom Table View. Toggles the display of the data in the bottom
detail graph from graph to table and back.
7. Take Snapshot. Takes a snapshot of the current power
measurements. Available only in 1750 Live views.
8. Insert Annotation. Inserts an annotation marker. Available only in
1750 Live views.
9. Help. Lets you get information about buttons on the screen and
commands in the menus . Click the Help tool button and then click the
item you want information about. For information about the contents
of the main graph area, click the Help button at the top of the Graph
controls on the right side.
10. Window List. Lets you switch between multiple windows in the
same recorded data file.
Tip: You hide or show the toolbar by choosing View > Toolbar.
Open Command
Related topics
Working with Recorded Data Files
Use the File > Open command to open a recorded data file that
contains downloaded power quality data. Power quality data files have
the extension ".odn."
Depending on the view, you may be able to see a table view of the top
graph, bottom graph, or both.
To return to the graph display, click the Table button again.
Close Command
Related topics
Working with Recorded Data Files
Use the File > Close command to close an open recorded data file.
Graph Toolbars
Related topics
Main Toolbar
When you view data on graphs, toolbars are available to help you
work with that data.
The particular tools available vary, depending on the contents of the
graph.
tool_buttons.png
1. Zoom All the Way Out. Zooms out to display the full graph. Only
active after you have zoomed in on a portion of a graph.
2. Zoom Out. Zooms out on the graph, keeping the same graph
center.
3. Zoom In. Zooms in on the graph, keeping the same graph center.
4. Select. Lets you select annotation markers in graphs on the Volts/
Amps/Hz view and the Events view. (When you select this, the Zoom
In tool becomes inactive.)
5. Zoom In box. Lets you zoom in on a portion of the data by
dragging a box around that area. (When you select this, the Select
tool becomes inactive.)
6. Guide. Shows or Hides the guides on a graph.
7. Copy. Copies the current graph to the Clipboard.
bae043s.png
When working with recorded data, there may be times when you want
to toggle back and forth between different sets of data to compare
them, without having to change the view controls each time. To do
this, you can open a new window.
Example
To compare Flicker data to Voltage on all phases:
1. First display the Flicker view.
2. Choose Window > New Window to open a second window
3. In the View toolbar, click Volts/Amps/Hz.
You can now switch back and forth between two windows by selecting
the items from the list of windows.
When windows are maximized, only one window can be viewed at a
time within the main data area. You can use the Cascade command
on the Window menu to resize the data windows and see them at the
same time.
For more information, see Comparing Data in Multiple Windows.
Tip: If you want to compare data in different recorded data files, you
can open multiple instances of Fluke Power Analyze. See Working with
Recorded Data Files.
Exit Command
Use the File > Exit command to exit Fluke Power Analyze and close
all open .odn files.
Toolbar Command
Use this command to show or hide the main toolbar in the Fluke Power
Analyze window.
Edit Menu
The Edit menu includes the commands listed below. For details, click
the command name.
Event Detector
Tolerance Curve Editor
Use the Tools > Display Comms Log command to display the
Logger window and see a record of all communications between Fluke
Power Analyze and a 1750 Power Recorder.
CommsLogger automatically runs in the background while you use
Power Analyze.
This command is not used to display the logger in day-to-day work
with Power Analyze. If you encounter problems communicating with a
Recorder, Fluke Technical Support may ask you to work with this
option.
If you accidentally display the CommsLog, you can hide it by choosing
Tools > Display Comms Log again.
A check mark shows when this command is on.
View menu
The View menu includes the commands listed below. For details, click
the command name.
Toolbar
Status Bar
Left Button Bar
View Recorded Submenu
Volts/Amps/Hz
Events
Harmonics
THD
Flicker
Summary
Power/Energy
View Snapshot Submenu
Scope
Phasor
Meter
Harmonics
Power
View Settings
1750 Live Submenu
Scope
Phasor
Meter
Harmonics
Power
Screen View Submenu
Top Full Screen
Bottom Full Screen
Split Screen
Table View
Preferences
Table View Submenu
Top Table View
Bottom Table View
Preferences Command
Related topics
Setting Preferences
Preferences dialog box
Use the Settings > Preferences command to customize the colors
used on traces and labels on graphs, and to specify the Phase Identification labels (A, B, C or L1, L2, L3).
Statistic limit values
Use the Settings > Statistic limit values command to set the limit
values.
Language Submenu
Use the Settings > Language command to change the language
selection. Power Analyze automatically restarts to enable the new
selection.
Tools Menu
The Tools menu includes the commands listed below. For details, click
the command name.
1750 Setup
1750 Download
1750 Shut Down
Erase 1750 Memory
Take Snapshot
Insert Annotation
Display Comms Log
Comms Log Options
Use the Tools > 1750 Setup command to open the Setup screen,
where you can enter settings appropriate for the location where you
will monitor data with the Recorder.
This is equivalent to clicking the 1750 Setup button on the left side
bar.
You can only insert annotations in live data; you cannot add
annotations to a recorded data file.
Annotations can also be added using Fluke Power View on the PDA.
azd218.bmp
Window Menu
The Window menu includes the commands listed below. For details,
click the command name.
Cascade
New Window (Recorded Views only)
Dialog Boxes
This section of the table of contents provides easy access to topics
about dialog boxes used throughout Fluke Power Analyze.
Buttons
Default (All). If you have moved the cursors, this button resets the
From and To fields to the full range available to be downloaded.
Save. Downloads the data based on the settings in this dialog box.
of values for the A-N channel and have them apply to all other phase
channels (but not neutral). When this option is selected, the fields for
the other phase channels gray out.
Limits Per Channel. These boxes let you specify the thresholds to
be used.
For voltage-triggered events, you can define the starting and ending
thresholds as either a percentage of nominal or as a particular RMS
value. Entering a value in either the % or VRMS field automatically
displays the corresponding value in the other field.
For current-triggered events, you define only the Amps value that
must be exceeded to be considered an event.
The start of an event will be when the voltage or current goes out of
the specified threshold. The end of the event will be when the voltage
or current returns to within the range.
Note
If fields are grayed out, they are not applicable to the
power configuration of the recorded data.
Enable Channels. If you are detecting events on a per channel basis,
select the channels on which you want to detect that event trigger.
Leaving a channel unchecked means event detection will not occur on
that channel. (These boxes are disabled if the Detect Events option is
set to combined.)
Detect Events. Events can be detected and displayed either per
channel or combined. "Combined" is the default.
Per channel detects and displays events per channel. This allows you
to look at events triggered on specific channels separately.
Combined detects and displays events together. The channel that
triggered the event is not recorded. When the voltage or current goes
out of range on any channel, an event begins. It continues until the
voltage or current is within range on all channels. (Note that when you
detect and display combined events, you cannot filter events per
phase in the Events view.)
Transient Limit. Sets the base magnitude to be used to define a
transient. (Transients are short-term, higher speed disturbances that
may or may not effect RMS voltage.) Data that exceeds the V pk value
entered will be displayed as a transient. The duration of a transient is
less than or equal to 1 ms.
Aggregate events within. Sets the time span (in seconds) within
which events should be aggregated. All events that occur within this
number of seconds will be considered to be one event, including
or to remind you what you wanted to focus on. You can enter a
detailed description of the current view in the comments area. To
enter a new line, press CTRL+Enter.
The name you enter here will appear in the list of items that can be
included in a report when you use the File > Auto Report command.
It will also be used as a heading in the report.
The list of tagged items is cleared when you open a different
measurement file, and when you exit the Power Analyze application.
European/UK
Phase A, B, C
Phase/
Trace
A/L1
Canada
Red
China
Yellow
Europe &
UK New
Brown
USA
Black
Europe
Old
UK Old
Black
Red
B/L2
Black
Green
Black
Red
Red
Yellow
C/L3
Blue
Red
Gray
Blue
Gray
Blue
Grey
Black
Blue
Gray
Blue
Black
Green
Green
Green
Green
Green
Green
Frequency
(HZ)
Olive
Olive
Olive
Olive
Olive
Olive
Total
(Power/
Energy)
Purple
Purple
Purple
Purple
Purple
Purple
The Comms Log Options dialog box opens when you choose Tools >
Comms Log > Comms Log Options.
Note
This dialog box should be used only when working with
Fluke Technical Support to resolve a communications
problem.
Apply. Saves the changes you have made to the embedded custom
curve, applies the curve to the Event Tolerance graph and leaves the
dialog box open so you can continue making changes.
Cancel. Closes the dialog box without making any changes.
Save. Opens a Save As dialog box in which you can specify a filename
and location for the curve. After you enter a name and click Save, the
curve is applied to the Event Tolerance graph and the dialog box
closes.
Help Menu
The Help menu includes the commands listed below. For details, click
the command name.
Help Topics
Help on Top Command
About Fluke Power Analyze Command
For more information about using Help, see Getting Help When You
Have a Question.