Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Operations on it. (Example: In Machining model you can add wave link of Casting model
and perform the machining operations)
8) What is Extract Body?
This option creates an associate copy of an entire body in part file. Features can then be
added to Extract Body feature without appearing on the original body. You can also
decide
Whether you want him Extract Body feature to update when the original body is changed.
9) What are Part families?
This option let you create a family of parts by creating a template part. You can use the
Unigraphics spread sheet (via the Create button on the Part Families dialog) to create a
table
Describing the various part family members.
10) What do you mean by Expressions?
Expressions are mathematical or conditional equations used to control the parameters of a
model. With expressions, you can easily apply major edits to a model. By changing the
9/8/2014 Unigraphics NX Interview Questions and Answers - 1 - Engineering Wave
http://www.enggwave.com/unigraphics-nx-interview-questions-answers-1/ 2/4
Expressions that control a specific parameter, you can re-size or re-position features of a
solid model
Three types of Expressions are there
1. Airthmatic Expressions
2. Conditional Expressions
3. Geometric Expressions
11) What is Direct Modeling or Synchronous Modeling?
Direct modeling techniques represents extended capabilities for some of the more basic
Unigraphics functions. Among these are face oriented operations, constraint based
methods,
blend regeneration and independence of feature history. You can use Direct modeling
functions on models that have been imported from other CAD systems and are nonparametric.
12) What is the limit for Undo?
we can use Undo for 222 times or until up to last time saved.
13) How many colors in are there in UG?
There are 216 colors in UG.
14) How many Layers are there in UG?
There are 256 Layers in UG.
15) What are Grips? What are there uses?
Grip programs can be executed as button action by specifying grip executable file names.
referred by
those in assembly, drafting, analysis and manufacturing department of the particular
company.
35) What is the displayed part and work part. Where does it come?
Displayed parts are the parts which can only be displayed but not editable while we can
both display and edit a work part. Both displayed part and work part comes under
assembly.
36) What is Reattach?
In Reattach, You can reattach a already created sketch to a different planar face or datum
plane.
37) What is string mode?
String mode is an option which is available while creating lines and arc using basic
curves. When the string mode is selected we can draw continuous lines or arc. If the
string mode not selected we can create only one line or arc at a time.
38) What is Reference Set?
Reference set controls the the amount of data that is loaded from each component and
viewed in context of an assembly. (Data likes Datum Planes, Axis, Solid body, Sheet
body,
Sketches, Curves etc)
39) What is Top Down Assembly?
In top down assembly we create the different parts in the same assembly file and
assemble it there itself.
40) What is Bottom Up Assembly?
In bottom up assembly we create the different parts of an assembly in separate file and
then get them and assemble using constraint.
41) How many mating constraints are there in assembly?
There are 8 mating constraints in assembly. Mate, Align, Angle, Parallel, Perpendicular,
Center, Center, Distance and Tangent.
42) How many ways to find the sketch is fully constrained in Unigraphics?
There are three ways to find the sketch is fully constrained. 1) In sketch environment
(status bar) 2) In part navigation 3) Checkmate
43) What do mean by NURBS?
NURBS is Non Uniform Rational Bezier Splines.
44) What is B surface?
B surface is Bazier surface.
45) What is the use of Expand command?
Expand command is used in Drafting. In the drafting application you can use expand to
create and edit objects in specific view.
46) What is Section Strings?
Section strings is defined as the curves which represent the section of the profile in
Sweep along guide or Swept command.
47) What is single segment in Tube?
By using single segment option in Tube we get a single smooth solid along the guide
curve.
48) What is law curve?
The law curve option lets you create a spline using the law Sub-function. A law spline is
defined by a set of X, Y, and Z components. You must specify a law for each of these
three
components.
49) What is the default tolerance for angle and distance in Unigraphics?
Angle o.5
Distance 0.0254
50) What is the minimum blend radius for a sheet metal?
The minimum blend radius is part tolerance.
51) What are primitives?
Primitive features are the basic analytic shapes. They are non associative, meaning they
are not associated to geometry used to create them.
52) How many primitives are there in Unigraphics?
There are four primitives. They are Block, Cylinder, Cone and Sphere.
53) In Ruled features how many section strings are necessary?
In Ruled feature two section strings are necessary.
54) Where will we use primary strings and cross strings?
We will use primary strings and cross strings in Through Curve Mesh option for creating
a free form feature.
55) How many numbers of characters can be used for part file name?
We can use 37 characters for a part file name.
56) What is the difference between Face blend and Soft blend?
A face blend can be created between the faces of solid and / or sheet bodies. The faces
can be non adjacent and/ or part of a different sheet body.
Soft blends let you create blends whose cross sectional shape is not circular.
57) What is the difference between datum plane and fixed datum plane?
A Datum plane is a reference plane that serves as aid when existing planes are not
available. The datum plane can be editor later. The fixed datum plane are datum planes
which cannot
be edited later.
58) How Can we identify the Manually edited dimensions in Drafting?
We can identify by going to Information >Others > Object specific > Dimension
with Manual Text.
59) How many types of views can we create in a drafting?
We can create 11 types of views in drafting.
60) What is the maximum number of guide curves used in Swept operation?
The maximum number of guide curves used in Swept operations is Three (3).