Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
The HyTracks Remote Gateway acts as an 'extension' of the main Server. The reason to
use the Remote Gateway in a HyTracks system is to cover distant regions where the
control stations connected to the main Server cant reach via RF.
The Remote Gateway is installed on a Windows based computer, and up to 4 radios can
be connected via USB + audio cable.
It is required IP CONNECTION between Remote Gateway PC and Server PC.
The control stations connected to a Remote Gateway PC are displayed on dispatcher
screen just like the stations connected to the Server. In other words, it is completely
transparent for the dispatcher the existence of one or several Remote Gateways in the
system.
Bellow is a example of how the Remote Gateway works in a HyTracks system:
Installing Pre-Requisites
ATTENTION: The following procedures CAN NOT be performed on the HyTracks Server
PC. Please use a different computer.
The 'Pre-Requisites' files are located in the Pre-Requisites folder inside the HyTracks
CD you received. It is also located on our server.
(www.hytracks.com/Pre-Requisites.zip).
Installing HyTracks
The software files are located inside the folder 'HyTracks_1.5.0.17_en' of HyTracks CD.
They are also available from the link bellow.
(www.hytracks.com/HyTracks_1.5.0.17_en.zip)
1. Open the HyTracks_1.5.0.17_en' folder. Double click 'HyTracks_v1.5.exe'. The
installation window will appear.
Click 'NEXT' to begin the installation.
2. Choose 'COMPLETE'.
3. Click 'INSTALL'.
4. After the installation process is finished, click 'Finish' to exit setup wizard.
License
FIELD
Mode
DESCRIPTION
Specify the HyTracks operation mode:
SERVER Specify the SERVER mode for HyTracks.
There can be only 1 Server per system!
GATEWAY Specify the GATEWAY mode for
HyTracks.
The GATEWAY mode must be selected when there is a
IP link between GATEWAY PC and SERVER PC, to
operate in a distant area, where the control station
connected to Server PC cant cover.
The GATEWAY PC can have multiple control stations
connected.
Port
Gateway Key
Save Changes
Install Service
5. On the login window, fill the IP ADRESS of the PC where the HYTRACKS SERVER is
running. Use your administrator login and password.
For more details about Server configuration, please refer to the 'HyTracks Installation
Manual - 1.5'
10
6. Click SETTINGS TAB, then click 'Gateways', and 'Add New Gateway'.
11
7. Insert the information from the Computer where Remote Gateway is running, and click
OK.
FIELD
DESCRIPTION
Name
Address:
Port
Authorization Key
12
8. After add the Remote Gateway, click 'APPLY CONFIGURATION' located on the
bottom right corner of the screen.
13
14
11. Fill the Control Station parameters. Bellow are our recommended settings.
FIELD
Name
DESCRIPTION
Specify the control station name.
This name will be displayed inside the channel box in
dispatch console radio screen.
Radio ID
IP Address
Test
Sound Player
Sound Recorder
15
click
APPLY
16