Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
information
15
PUBLISHED 23 MARCH 2010 | REV. 20
Supersedes VSI 15 | Rev. 19 | 9 March 2010
Engineering signatories
Purpose
To provide vehicle owners and constructors with a list of persons, known as ‘engineering signatories’,
who are recognised by the Roads and Traffic Authority (RTA) and are available for consultation about
vehicle construction requirements, and who are able to issue engineering certificates.
Note: The Engineering Certificate System (ECS) referred to in this information sheet will be replaced by the
Vehicle Safety and Compliance Certification Scheme (VSCCS) during 2010. The RTA is no longer accepting
applications for membership to the ECS, pending the introduction of the VSCCS.
Information will be made available on the RTA’s website about the VSCCS prior to it being implemented.
Once the VSCCS is in place, the ECS will cease to exist and this VSI will be replaced with a new list of
VSCCS licensed certifiers (VSI No.48). All enquiries regarding the VSCCS can be directed by e-mail to
vehicle_safety_compliance@rta.nsw.gov.au, or by phone to Jill Gallagher on (02) 8588 4448.
Introduction
The persons on this list are recognised by the RTA as being experienced in vehicle design, standards and
construction requirements. For a fee, they will provide advice to vehicle owners and constructors,
undertake technical assessments, and if appropriate issue an engineering certificate. However, in
publishing this list the RTA does not endorse the engineering signatories’ services nor does it take any
responsibility for the quality of the engineering signatories’ work.
For the purpose of registration the RTA will only accept certificates from RTA recognised engineering
signatories. Vehicle owners and constructors intending to engage the services of an engineering signatory
must consult with the signatory and establish if the RTA will accept their certificate for the scope of the
proposed modifications, individually constructed vehicle (ICV) or imported vehicle. Owners should also
confirm the fee arrangements with the engineering signatory, and their level of professional indemnity
insurance.
An engineering signatory who certifies a motor vehicle must:
• Personally inspect the vehicle.
• Ensure that the scope of construction or modification complies with the vehicle standards
requirements of NSW legislation including all relevant applicable Australian Design Rules (ADRs).
• When satisfied, issue an engineering certificate in the format specified under the ECS (see pages 3
and 4).
2. The certificate must include details of the engineering signatory’s membership of the requisite
organisation.
3. These details show the modifcations made to the vehicle when the certificate is issued. This serves
to identify additional vehicle modifcations made after the certificate is finalised.
4. Additional information that adequately describes the modifications in detail must be provided
including statements indicating the basis or acceptance and demonstration of ADR compliance.
5. Notice regarding the time limit in which the certificate must be presented to the RTA if the vehicle is
to be registered.
Related publication
VSI No. 2 Restricted engineering signatories provides an additional list of signatories who are recognised
by the RTA to certify vehicles according to specific categories of work, for the purposes of registration in
NSW.
Vehicle Standards Information | No. 15 | Rev. 20 | Published 23 March 2010 2 (12 pages)
1. Sample front page of engineering certificate for all vehicles other than buses
Refer to page 2 for key to sample.
LETTERHEAD WITH
ADDRESS AND
TELEPHONE NUMBER
I have personally examined the vehicle described below. I hereby certify that the particulars shown in
this certificate are correct and that the vehicle it describes is:
• a Modified Production Vehicle • an Individually Constructed Vehicle • an Imported Vehicle
(cross-out whichever of the above is not applicable)
In the affected areas, the vehicle meets the requirements of the Road Transport (Vehicle Registration)
Regulation 2007, as amended.
SCOPE OF CERTIFICATION
A replacement 5766 V8 Holden engine and Ford 4 speed manual transmission have been fitted to the vehicle.
4 The rear axle assembly (including the drum brakes) has also been replaced with those items from a Ford XW GT
Falcon. Refer to the attached notes for additional details of these modifications and their compliance with the
affected ADRs.
This certificate must be presented to the RTA within three months of the date of issue if the
vehicle is to be registered. The RTA may not accept a certificate if it is presented more than three
5 months after its date of issue.
Vehicle Standards Information | No. 15 | Rev. 20 | Published 23 March 2010 3 (12 pages)
2. Sample front page of engineering certificate for all buses. Refer to page 2 for key to sample.
LETTERHEAD WITH
ADDRESS AND
TELEPHONE NUMBER
I have personally examined the bus described below. I hereby certify that the particulars shown in this
certificate are correct and that the bus it describes is:
• a Modified Production Vehicle • an Individually Constructed Vehicle • an Imported Vehicle
(cross-out whichever of the above is not applicable)
In the affected areas, the bus meets the requirements of the Road Transport (Vehicle Registration)
Regulation 2007, as amended, for a:
• Public Passenger Vehicle • Private Vehicle
(cross-out whichever of the above is not applicable)
Vehicle components:
a) Engine : Original 6 cyl. turbo diesel
b) Transmission and driveline : Original 4 speed ZF
c) Front suspension and axles : Original
d) Rear suspension and brakes : Original
e) Braking system : Original
f) Steering system : Original
g) Wheels and tyres : Original
h) Body/chassis : Modified
i) Seating : Original (45 seats)
SCOPE OF CERTIFICATION
4 The body of the bus has been modified by fitting an additional emergency exit mid-way along the right hand side.
Refer to the attached notes for additional details of the modification and its compliance with the affected ADRs.
This certificate must be presented to the RTA within three months of the date of issue if the vehicle
5 is to be registered. The RTA may not accept a certificate if it is presented more than three months
after its date of issue.
Vehicle Standards Information | No. 15 | Rev. 20 | Published 23 March 2010 4 (12 pages)
Engineering signatories
Key:
IE Aust: Member of Engineers Australia (previously known as The Institution of Engineers Australia), Chartered
Professional Engineer.
SAE-A: Member of The Society of Automotive Engineers, Automotive Signatory Group.
PC: Passenger cars and derivatives.
LV: Light commercial vehicles, up to and including 4.5 tonnes Gross Vehicle Mass (GVM)).
HV: Heavy vehicles, over 4.5 tonnes GVM.
MC: Motorcycles.
9: Authorised in this category.
—: Not authorised in this category.
C_: Authorised in this category subject to following conditions:
C1 Body and chassis only C2 Chassis and engine modification only
C3 Body and seats only C4 Suspension, steering and chassis only
C5 Under 12 tonnes GVM only C6 No Individually constructed vehicles (ICVs) or
re-bodied vehicles
Vehicle Standards Information | No. 15 | Rev. 20 | Published 23 March 2010 5 (12 pages)
Sydney metropolitan & environs (continued)
Name & Company Address Telephone/Fax/ Prof. Work category
Mobile number M/ship PC LV HV MC
GILLARD Peter J 233 Canterbury Road P: (02) 9787 1114
Chamonix (Aust) Pty Ltd CANTERBURY F: (02) 9560 7860 IE Aust 9 9 9 —
t/a ADR Compliance NSW 2193 M: 0412 546 825
Services E: peter@550spyder.com.au
GOUDIE Peter 75 Eddy Road P: (02) 9419 3535
CHATSWOOD F: IE Aust 9 9 9 9
NSW 2067 M: 0400 633 562
E: pcgoudie@tpg.com.au
GRDUSIAK Richard Lot 13/143 P: (02) 4721 4395
R P & D A Grdusiak Pty Ltd Coreen Avenue F: (02) 4721 4395 SAE-A 9 9 C5 —
PENRITH M: 0418 282 382
NSW 2750 E: richard_grdusiak@hotmail.com
GUNARATNAM Lesley M 4 Bluegum Circuit P: (02) 9631 5016
Lita Engineering OLD TOONGABBIE F: (02) 9631 5016 IE Aust 9 9 9 —
Consulting Pty Ltd NSW 2146 M:
E: gunal@tpg.com.au
JANDA Steven J 7 Moon Point Road P: (02) 9541 1500
ILLAWONG F: IE Aust 9 9 9 9
NSW 2234 M: 0419 807 000
E: info@startrade.org
KNAPP Keith E 22 John Street P: (02) 9638 4420
RYDALMERE F: (02) 9638 4420 IE Aust 9 9 9 —
NSW 2116 M: 0419 129 062
E:
MONTANO Jorge C PO Box 227 P: (02) 4627 8422
J C Montano Engineering Macarthur Square F: (02) 4627 8422 IE Aust 9 9 9 9
Consultants Pty Ltd AMBERVALE M: 0402 496 927
NSW 2560 E: JCMontano@bigpond.com
NICOLSON Alan F 11 Thomas Road P: (02) 9653 1483
Automotive Consultant GALSTON F: (02) 9653 1483 IE Aust 9 9 9 9
Services Pty Limited NSW 2159 M:
E:
PERKINS Roger 10 Blue Gum Road P: (02) 9679 1621
Roger Perkins & ANNANGROVE F: (02) 9679 1114 SAE-A 9 9 9 —
Associates Pty Ltd NSW 2156 M: 0427 414 722
E: rjp@tig.com.au
ROSS Raymond 46 Northcote Street P: (02) 8197 1878
Ray Ross & Associates ST LEONARDS P/F: (02) 9405 2294 IE Aust 9 9 — 9
NSW 2065 M: 0404 246 829
E: rossconsulting@optusnet.com.au
SEINOR Grahame W 37 Niblick Crescent P: (02) 9630 8603
Grahame Senior & Co. OATLANDS F: (02) 9630 8603 SAE-A 9 9 — —
Pty Ltd NSW 2117 M: 0409 818 603
E: gsenior@bigpond.com
SHEPHERD Mathew 20 Lilac Place P:
C & M Shepherd JAMISONTOWN F: (02) 4733 1300 IE Aust — — 9 —
Consulting Engineers NSW 2750 M: 0401 377 275
sonofbobs@yahoo.com
Vehicle Standards Information | No. 15 | Rev. 20 | Published 23 March 2010 6 (12 pages)
Sydney metropolitan & environs (continued)
Name & Company Address Telephone/Fax/ Prof. Work Category
Mobile number M/ship PC LV HV MC
SMITH Peter L 14 Little Street P: (02) 4655 9440
Peter L Smith CAMDEN F: (02) 4655 8687 IE Aust 9 9 9 9
Engineering Pty Ltd NSW 2570 M: 0412 559 440
E: psmith@psmitheng.com.au
SPRY Peter 46 Fluorite Place P: (02) 9820 7327
P R Spry and Associates EAGLE VALE F: (02) 9820 8549 IE Aust 9 9 9 9
NSW 2558 M: 0409 468 096
E: pspry@ozemail.com.au
TOOMEY Terry N Unit 3 ‘The Hub’ P: (02) 9674 4003
Automotive Consultant 128 Station Road F: (02) 9674 6003 SAE-A 9 9 9 —
Engineer - t/a Tandem SEVEN HILLS M: 0408 232 372
Chassis Developments NSW 2147 E: terrytoomey@ihug.com.au
VARETIMIDIS John Unit 8/16-16A Hearne St P: (02) 9153 0011
Consulmotive Pty Ltd MORTDALE F: (02) 9153 0592 SAE-A 9 9 — —
NSW 2223 M: 0412 253 973
E: consulmotive@optusnet.com.au
WHITTLE James W 2 Cunneen Street P: (02) 4587 7411
West Trans Equipment MULGRAVE F: (02) 4577 3162 SAE-A — 9 9 —
NSW 2756 M:
E: sales@west-trans.com.au
WOODS Phillip G Unit 1, 7 Anvil Road P: (02) 9624 7274
Consulting Engineer TOONGABBIE F: (02) 9634 1079 IE Aust 9 9 9 —
NSW 2147 M: 0402 981 313
E: pwoods@unwired.com.au
WOODWARD Harold K Lot 50 Nepean Street P: (02) 4632 7459
Vehicle Crash Aetologist DOUGLAS PARK F: (02) 4632 7469 SAE-A 9 9 9 —
NSW 2569 M: 0419 291 221
E: forensic@nsw.chariot.net.au
ZULLO Mark C 14 Little Street P: (02) 4655 9440
Peter L Smith CAMDEN F: (02) 4655 8687 IE Aust 9 9 9 9
Engineering Pty Ltd NSW 2570 M:
E: engineering@psmitheng.com.au
Vehicle Standards Information | No. 15 | Rev. 20 | Published 23 March 2010 7 (12 pages)
Newcastle and Central Coast (continued)
Vehicle Standards Information | No. 15 | Rev. 20 | Published 23 March 2010 8 (12 pages)
SOUTHERN AND WESTERN NEW SOUTH WALES
Name & Company Address Telephone/Fax/ Prof. Work Category
Mobile number M/ship PC LV HV MC
ALLEN James S 226 Cloughs Road P: (02) 6922 9151
Allen & Scott Engineering YARRAGUNDRY F: (02) 6922 9151 IE Aust 9 9 9 9
(via Wagga Wagga) M: 0427 229 151
NSW 2650 E:
BRADY Brian M 8 Arunta Drive P: (02) 4267 3969
Automotive Engineering THIRROUL F: (02) 4267 3969 SAE-A 9 9 9 9
Consultant NSW 2515 M: 0407 939 216
E: bbrady@exemail.com.au
CLARKE Peter 140 Island Point Road P: (02) 4443 4479
St Georges Basin LPG ST GEORGES BASIN F: (02) 4443 4516 SAE-A 9 9 — —
Conversions, Automotive NSW 2540 M:
& Mechanical Repairs E:
DOHNT Balfour 25 Stonehaven Avenue P: (02) 6882 5169
Dohnts Automotive DUBBO F: (02) 6885 2060 SAE-A 9 9 9 9
Engineering Services NSW 2830 M:
E:
FARRIMOND Hugh R 1 Argyle Street P: (02) 4877 2009
Light Vehicle Inspections BERRIMA F: (02) 4877 2629 IE Aust 9 9 — —
Pty Ltd NSW 2577 M: 0439 647 418
E: hughlvi@bigpond.net.au
KARAISTE Jame 3/8 Pioneer Drive P: (02) 4284 9902
Northside Automotive BELLAMBI F: (02) 4284 9912 SAE-A 9 9 9 9
Consulting Services Pty Ltd NSW 2518 M: 0407 898 405
E: nthsauto@bigpond.com
LAROCCA Mario 11 Shropshire Street P: (02) 6299 3400
Marloc Engineering QUEANBEYAN F: (02) 6299 4050 IE Aust 9 9 9 9
& Car Repairs NSW 2620 M:
E: mario@marloc.com.au
LEHMANN Vaughan 2440 Rocky Plain Road P: (02) 6456 8873
Lehmann Civil & Structural Via BERRIDALE F: (02) 6456 8873 IE Aust C1 C1 C1 —
Engineering NSW 2628 M:
E: lehmeng@hotmail.com
POTTS Colin J ‘Springmore’ Round Plain P: (02) 4227 4800
C P Engineering via BERRIDALE F: (02) 4227 4811 SAE-A 9 9 9 —
& Equipment NSW 2628 M: 0428 421 065
E: colpott@bigpond.com.au
TURNER Peter J 44 Box Street P: (03) 5473 4380
Peter Turner MERBEIN F: (03) 5473 4380 IE Aust 9 9 9 9
Consulting Engineer VIC 3505 M: 0429 914 234
(near Wentworth NSW) E: teched21@bigpond.com
WILSON John W 54 Paterson Parade P: (02) 6236 3009 IE Aust
AKZ Vehicle Engineering QUEANBEYAN F: (02) 6236 3013 9 9 — 9
NSW 2620 M: 0417 230 074 SAE-A
E: johnakzvehicleengineering@gmail.com
Vehicle Standards Information | No. 15 | Rev. 20 | Published 23 March 2010 9 (12 pages)
Southern and Western New South Wales (continued)
Name & Company Address Telephone/Fax/ Prof. Work Category
Mobile number M/ship PC LV HV MC
WOODWARD Robert J 10 Ironbark Place P: (02) 6971 1564
Barkwood Consulting Springvale F: (02) 6971 1564 SAE-A — 9 9 —
Pty Ltd WAGGA WAGGA M: 0409 462 674
NSW 2650 E: barkwood@gmail.com
XEROS Philip G 5 Bye Street P: (02) 6925 5855
Xeros Kendall WAGGA WAGGA F: (02) 6925 5655 SAE-A C2 C2 — C2
Consulting Engineers NSW 2650 M: 0428 693 590
E: xkwagga@people.net.au
VICTORIA
Name & Company Address Telephone/Fax/ Prof. Work Category
Mobile number M/ship PC LV HV MC
BARTLETT Geoffrey N 6-8 Abbot Road P: (03) 9796 3222
IE Aust C4
Bartlett Transport HALLAM F: (03) 9796 3510 — — —
Improvement VIC 3803 M: 0419 547 823
E: geoff@bartlett-equip.com.au
CARTER Rowan J 65 Butler Street P:
Cartech Pty Ltd RICHMOND F: (03) 9277 7314 IE Aust 9 9 — 9
VIC 3121 M: 0419 313 113
E: rowan.carter@cartech.com.au
ENKELMAN Andrew 1/5 Braeside Drive P: (03) 9580 3024
IE Aust
A Enkelman & Associates BRAESIDE F: (03) 9587 1268 9 9 9 9
SAE-A
Pty Ltd VIC 3195 M: 0419 733 911
E: andrew@enkelman.com.au
FORZA John C 41-43 Assembly Drive P: (03) 9330 2772
Road Trans Engineering TULLAMARINE F: (03) 9330 3549 SAE-A — — 9 —
Pty Ltd VIC 3043 M:
E:
HODGES Phill 14/69 Acacia Road P: (03) 9753 5200
Transport Certification FERNTREE GULLY F: (03) 9753 5600 SAE-A — — 9 —
Services VIC 3156 M:
E: phillip.hodges@transportengineer.com
LAMBERT John 235 Wandana Drive P: (03) 5249 1228
John Lambert & Associates WANDANA HEIGHTS F: (03) 5249 1146 IE Aust 9 9 9 —
Pty Ltd VIC 3216 M: 0417 033 258
E: lambertj235@bigpond.com
LYONS John G 4 Drummond Street P: (03) 5754 4953
C3
North East TAWONGA F: (03) 5754 4953 IE Aust 9 9 —
Automotive Consulting VIC 3697 M: 0417 598 361 C5
E: jglyons@dragnet.com.au
MACKINLAY Keith R 2 Old Creswick Road P: (03) 5339 6777
Bisitecniks Pty Ltd WENDOUREE F: (03) 5339 6644 IE Aust 9 9 9 —
VIC 3355 M: 0418 518 884
E: adrcert@bisi.com.au
McHARG Kenneth R 30 Walkers Road P: (03) 5664 8278
K McHarg Pty Ltd MIRBOO F: (03) 5664 8278 IE Aust 9 9 9 9
Automotive Engineering VIC 3871 M: 0428 648 278
Consultant E: kmcharg@tpg.com.au
Vehicle Standards Information | No. 15 | Rev. 20 | Published 23 March 2010 10 (12 pages)
Victoria (continued)
Name & Company Address Telephone/Fax/ Prof. Work Category
Mobile number M/ship PC LV HV MC
PRAIN Ian A 74 Ahern Road P: (03) 5941 4766
Prain Consulting Pty Ltd PAKENHAM F: (03) 5941 4959 IE Aust — 9 9 —
VIC 3810 M: 0408 799 350
E: prainconsulting@gmail.com
STANNUS David 8 Damosh Avenue P: (03) 9775 0133
Protech Developments CARRUM DOWNS F: (03) 9775 1237 IE Aust 9 9 C5 9
Pty Ltd VIC 3201 M:
E: david@protechdevelopments.com.au
STUTE Peter James 2 Valentine Street P: (03) 5337 5700
ASEMA International BALLARAT F: (03) 5336 4524 IE Aust — — 9 —
Pty Ltd VIC 3350 M: 0411 102 415
E: pstute@asema.com.au
TURNER Peter J 21 Franzi Street P: (03) 5473 4380
Peter Turner GUILDFORD F: (03) 5473 4380 IE Aust 9 9 9 9
Consulting Engineer VIC 3451 M: 0429 914 234
E: teched21@bigpond.com
VAN DEN BERG Edward 41-43 Assembly Drive P: (03) 9330 2772
Road Trans Engineering TULLAMARINE F: (03) 9330 3549 SAE-A — — 9 —
Pty Ltd VIC 3043 M: 0421 087 521
E: eddie@roadtrans.com.au
WATTERS Jeffrey D 5 McLellan Street P: (03) 9762 2277
Applied Engineering BAYSWATER F: (03) 9762 2355 IE Aust 9 9 9 —
Analysis Pty Ltd VIC 3153 M: 0418 106 472
E: info@automobility.com.au
WILLIAMS Kevin C 47 Butlers Road P: (03) 9434 7687
KC Williams Consulting PLENTY F: (03) 9432 0954 IE Aust 9 9 9 9
Pty Ltd VIC 3090 M: 0417 383 349
E: kevin.williams@tpg.com.au
QUEENSLAND
Name & Company Address Telephone/Fax/ Prof. Work Category
Mobile number M/ship PC LV HV MC
BLEAKLY Christopher J 40 Ridgeway Street P: (07) 3300 3564
Commercial Vehicle THE GAP F: (07) 3300 1691 IE Aust — 9 9 —
Design Services Pty Ltd QLD 4061 M:
E: kit@cvds.com.au
HARTWIG Bruce J 25 Raven Street P: (07) 3255 1621
Sapid Pty Ltd WEST END F: (07) 3255 1630 IE Aust 9 9 9 9
QLD 4101 M: 0432 379 363
E: sapidpl@tpgi.com.au
JARZAB Henryk 11 Westerway Street P: (07) 3273 7634 IE Aust
Automech Design & Testing SLACKS CREEK F: (07) 3299 3044 9 9 9 9
SAE-A
Services Pty Ltd QLD 4127 M: 0419 558 033
E: acs@bigpond.net.au
JOHNSON Bruce M 4 Colworth Street P: (07) 3344 1803
Bruce Johnson SUNNYBANK HILLS F: (07) 3344 1803 IE Aust 9 9 9 9
Consulting Services QLD 4109 M: 0413 137 201
E: bjcsengineering@gmail.com
Vehicle Standards Information | No. 15 | Rev. 20 | Published 23 March 2010 11 (12 pages)
Queensland (continued)
Name & Company Address Telephone/Fax/ Prof. Work Category
Mobile number M/ship PC LV HV MC
LYE Anthony Mt Brisbane Road P: (07) 3425 1808
Pleasantrees MT PLEASANT F: (07) 3425 1808 IE Aust 9 9 9 9
Engineering Pty Ltd QLD 4521 M:
E:
McMAHON Trent 2 Solander Street P:
OS Imports Pty Ltd CARINA F: (07) 3200 3688 IE Aust 9 9 — —
QLD 4152 M: 0437 126 853
E: trentmcmahon@gmail.com
MILLER Raymond 6 Cloghan Street P: (07) 3300 4700
Ray Miller Pty Ltd THE GAP F: (07) 3300 5655 IE Aust 9 9 9 9
QLD 4061 M: 0411 426 110
E: miller@gil.com.au
SHINKARENKO Andrei V 147 Rosia Road P: (07) 3297 1940
Novocastrian Automotive PARK RIDGE SOUTH F: (07) 3297 1940 IE Aust 9 9 9 9
Engineering QLD 4125 M: 0400 571 940
E: andreishinkarenko@msn.com
SOUTH AUSTRALIA
Name & Company Address Telephone/Fax/ Prof. Work Category
Mobile number M/ship PC LV HV MC
BURTON Graeme R 66 Rundle Street P: (08) 8273 3100
Tonkin Consulting KENT TOWN F: (08) 8273 3110 IE Aust 9 9 9 9
SA 5067 M: 0407 617 183
E: graeme.burton@tonkin.com.au
EDWARDS Robert G 58 Alpha Road P: (08) 8342 5999
Transport Engineering PROSPECT F: (08) 8342 1555 SAE-A 9 9 9 9
& Management Pty Ltd SA 5082 M: 0418 816 485
E: bob@team.net.au
POTTS William D 1 Bendall Avenue P: (08) 8271 4573
Australian Technology WAYVILLE F: (08) 8373 1907 IE Aust 9 9 9 9
Pty Ltd SA 5034 M: 0412 217 360
E: wdrpotts@bigpond.net.au
WESTERN AUSTRALIA
Name & Company Address Telephone/Fax/ Prof. Work Category
Mobile number M/ship PC LV HV MC
PITIC Adrian D 6 Brighton Mews P: (08) 9307 1436
Endracon Pty Ltd HILLARYS F: (08) 9307 1046 IE Aust 9 9 9 9
WA 6025 M: 0419 932 022
E: apitic@bigpond.net.au
Vehicle Standards Information | No. 15 | Rev. 20 | Published 23 March 2010 12 (12 pages)