Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Lighting Specialists
Mariteam Lighting
Company Profile
Mariteam Lighting Inc. was established in 1991 as the North American
production and distribution center for the Glamox Group of products. Mariteam
is owned by the Glamox Group of Norway, the worlds largest supplier of marine
and offshore lighting fixtures, employing over 1200 worldwide.
Mariteam is responsible for manufacturing, sales and distribution of well known
brands of marine and offshore lighting: Glamox, Aqua Signal, Norselight, Hovik
Lys and Versalux. Mariteam manufactures all UL and CSA certified products for
the group worldwide.
As a member of the Glamox Group, Mariteam is networked with affiliated
companies and subsidiaries throughout the world, resulting in technical
knowledge, sales and distribution on every continent. Mariteam has extensive
knowledge of all regulatory standards to meet customer requirements anywhere
in the world.
M a riT e a m L ig h tin g In c .
A Glamox Company
Glamox has been manufacturing luminaires since 1947, and currently produces over
5,000 units a day from its main factory in Molde, Norway. Glamox luminaires for all types
of marine and offshore installations, are available worldwide through factories and
distributors in 60 countries. Having exported marine and offshore luminaries for over 50
years, Glamox is familiar with marine and offshore standards and regulations all around
the world, and produces an extensive line of fittings for hazardous locations.
Website: www.glamox.com
Founded in 1868 Aqua Signal has over 125 years of experience as a world leading
specialist in maritime lighting technology. The company, based in Bremen, Germany has
subsidiaries in the United States and Australia. Over 60% of the companys production
of navigation lights, floodlights, interior and exterior marine fittings and emergency
lighting systems are exported.
Website: www.aquasignal.de
For over 50 years Norselight has manufactured marine searchlights and floodlights for
worldwide markets from Halden, Norway. Norselight stepped up to the challenges of the
oil and gas sector with specially designed searchlights and floodlights designed to meet
the requirements of the industry worldwide, including protection class IP67.
Website: www.norselight.com
Hoviks history is synonymous with electric lights in Norway, being the first company in
Scandinavia to produce lamp glasses as early as 1874. Hovik operates from a modern
factory in Halden, Norway and includes an extensive network of agents and distributors
around the world. Hovik specializes in producing custom decorative fittings to meet the
demanding aesthetic specifications of architects and engineers.
Website: www.glamox.com/hoviklys
M a riT e a m L ig h tin g In c .
A Glamox Company
Contents
Our Products
Mariteam Lighting, Inc. manfactures
the CSA and UL approved product
lines of Glamox, Aqua Signal,
Norselight and Hovik Lys in North
America.These four international
companies furnish a broader range of
marine lighting than any other
company in the world and, in fact,
manufacture and supply more marine
lighting than anyone else in the
industry.
At Mariteam, our emphasis is on the
necessity of being in close contact
with the people who use the products.
This contact has resulted in a broad
spectrum of quality marine fixtures for
all purposes and conditions. Simple
maintenance, long lifetime, lightguiding reflectors, and low energy
consumption are other key selling
points of our lighting fixtures.
M a riT e a m L ig h tin g In c .
A Glamox Company
5 - 11
Accommodation space
12 - 35
Downlights
36 - 41
Illuminated signs
42 - 45
Hazardous areas
46 - 53
Floodlights
54 - 61
62 - 65
66 - 73
Searchlights
74 - 77
Technical information
78 - 84
OptiWin
OptiWin is Glamoxs proprietary lighting design software. It enables even the most novice lighting designer to develop
the optimal lighting solution, providing the maximum lighting for minimal cost.
OptiWins graphic display for room information is selfexplanatory. All revelant information is entered using menus
with pre-defined values. By simply filling in the details the
illumination level estimates are calculated automatically.
M a riT e a m L ig h tin g In c .
A Glamox Company
GSV
120V/60Hz
Technical Specification
Application: Shower, washroom, interior & exterior
machinery spaces.
Approvals: CSA C22.2 No.250.0-00
Protection: IP67
Housing: Aluzinc sheet steel, deep drawn, seamless.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: 5mm clear acrylic diffuser attached by two screws.
Sealed by neoprene gasket.
Electrics: Flexible wiring, heat resistant to 105C.
Cable entry: One PG16 cable gland in one end and one
Type
PG16 blind plug in other end.
2X8W
Lamp base: G5
Light source(not included): Fluorescent lamp 8W, T5.
Other voltages on request
Mounting: Direct to bulkhead or deckhead.
Part Number
120V/60Hz - HPF
GSV 1000
Spare Parts
Item
Description
Part No.
Item
Description
Part No.
Ballast
991005
992002
Starter
995002
995000
Lamp
994004
993004
Diffuser
Blind plug
M a riT e a m L ig h tin g In c .
A Glamox Company
995001
GKI
IP54
IP67
Battery
Backup
120V/60Hz
120-277V/50-60Hz
Technical Specification
M a riT e a m L ig h tin g In c .
A Glamox Company
2X17W
Type
2X17W
Stainless Steel
3X17W
3X17W
Stainless Steel
2X20W
2X20W
Stainless Steel
2X32W
2X32W
Stainless Steel
3X32W
3X32W
Stainless Steel
2X40W
2X40W
Stainless Steel
2X40W Com pact Fluorescent
2X40W Com pact Fluorescent
Stainless Steel
Other voltages on request
IP54
IP67
IP54
IP67
IP54
IP67
IP54
IP67
IP54
IP67
IP54
IP67
IP54
IP67
IP54
IP67
IP54
IP67
IP54
IP67
IP54
IP67
IP54
IP67
IP54
IP67
IP54
IP67
GKI
Item
Ballast
Description
2X17/32W; 120V/60Hz
2X17/32W; 120-277V/50-60Hz
3X17/32W; 120V/60Hz
3X17/32W; 120-277V/50-60Hz
2X20W; 120V/60Hz; Magnetic
2X40W; 120V/60Hz; Magnetic
2X40W/30BX; 120V/60Hz
2X40W/30BX; 120-277V/50-60Hz
Diffuser 2X17/20W; Clear Polycarbonate
2X32/40W; Clear Polycarbonate
Lens Clip Stainless Steel (4 pcs)
Part No.
Item
Description
991000
Lamp 17W/T8; Bi-pin; Cool White
991003
20W/T12; Bi-pin; Cool White
991010
32W/T8; Bi-pin; Cool White
991006
40W/T12; Bi-pin; Cool White
991001
40W/30BX; CF; Cool White
991002 Lampholder 17/20/32/40W; G13; White (4 pcs)
991040
40W/30BX; 2G11; White (4 pcs)
991048
Battery Battery Backup Unit; 90 minute; 120V
993000
Battery Backup Unit; 90 minute; 120-277V
993001 Cable Gland M20 Polyamide (4 pcs)
995047 Blind Plug M20 Polyamide (4 pcs)
M a riT e a m L ig h tin g In c .
A Glamox Company
Part No.
994000
994001
994002
994003
994006
992000
992008
991004
991036
995067
995068
1444
IP55
IP67
120V/60Hz
120-277V/50-60Hz
Technical Specification
Application: Decks, machinery spaces, stores, holds, etc.
Approvals: UL 1598 & 1598A.
Protection: IP55 or IP 67
Housing: Aluzinc sheet steel or stainless steel, deep drawn,
seamless.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Clear polycarbonate
Electrics: Fully removable gear tray for easy installation.
Flexible wiring, heat resistant to 105C; through wiring up to
15 A.
Cable entry: One PG16 cable gland and one PG16 blind
plug in each end. Other configurations available upon
request.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90 minute battery backup. 500600 lumens for 90 minutes at 20C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: 2 brackets for direct mounting to bulkhead or
deckhead.
Remarks: Low temperature ballast is available upon
request.
M a riT e a m L ig h tin g In c .
A Glamox Company
1444
Type
2X17 Watt
IP55
IP67
0801003003
0801003019
0801003007
0801003020
2X17 Watt
IP55
0801003009
0801003021
0801003011
0801003022
Stainless Steel
IP67
0801003013
0801003023
0801003015
0801003024
2X20 Watt
IP55
0801003002
0801003006
IP67
0801003004
0801003008
2X20 Watt
IP55
0801003010
0801003012
Stainless Steel
IP67
0801003014
0801003016
2X32 Watt
IP55
0801004001
0801004017
0801004005
0801004018
IP67
0801004003
0801004019
0801004007
0801004020
2X32 Watt
IP55
0801004009
0801004021
0801004011
0801004022
Stainless Steel
IP67
0801004013
0801004023
0801004015
0801004024
2X40 Watt
IP55
0801004002
0801004006
IP67
0801004004
0801004008
IP55
0801004010
0801004012
Stainless Steel
IP67
Other voltages on request
0801004014
0801004016
2X40 Watt
Spare Parts
Item
Ballast
Lamp
Description
Part No.
Item
Description
991001
991002
991003
994000
Diffuser
Battery
Part No.
992001
993002
993003
991004
991036
995000
994002
995001
994003
M a riT e a m L ig h tin g In c .
A Glamox Company
GIOC
NEMA 13
Technical Specification
Application: Severe industrial applications including wet
and abrasive environments. Designed to prevent dust from
collecting on lens.
Approvals: CSA C22.2 No.250.0-00
Protection: NEMA 13
Housing: Sheet aluminum.
Finish: Epoxy powder coated, white RAL 9016.
Lens: Safety glass.
Voltage
Universal Voltage
Electrics: Flexible wiring, heat resistant to 105C; through
Type
120V/60Hz
HPF
120-277V/50-60Hz
wiring up to 15 A.
Cable entry: One hole in one end & one blind plug in 3X32 Watt
GIOC 1007
GIOC 1008
other end.
Other voltages on request
Lamp base: Push on spring loaded lampholders G13.
Light source(not included): Fluorescent lamp; 32W T8
S pare Parts
with electronic ballast.
Item
Description
Part No.
Mounting: Integral mounting brackets for double chain
Ballast
3X32W
;
120-277V/50-60Hz
;
Electronic
991006
hanging.
3X32W ; 120V/60Hz
991007
Lampholder
Spring loaded (4 pcs)
992003
Stationary (4 pcs)
992004
Lamp
F32/T8 ; Cool White
994002
Diffuser
10
993005
M a riT e a m L ig h tin g In c .
A Glamox Company
1995
Globe Light
Max.
277V
Technical Specification
Application: Designed as an alternative to the brass globe
& guard fixture. It is also available in many different color
globes for use as a signalling light. Ideal for salt water
environments.
Approvals: UL 1598 & 1598A.
Protection: Watertight, superior corrosion resistance.
Housing: Special black rigid plastic.
Globe: Impact resistant clear rigid plastic, available in clear,
green, red, blue, & yellow.
Electrics: Fully removable gear tray for easy installation.
Flexible wiring, heat resistant.
Cable entry: Four NPT threaded openings with
knockouts. One NPT cable gland supplied. Please order
additional cable glands separately.
Lamp base: Medium base screw socket or G23.
Light source(not included): Incandescent 100W max. or
compact fluorescent lamp 9W, G23.
Mounting: 2 integral brackets for direct mounting to
deckhead. Optional wall mounting bracket also available.
Please order separately.
Type
Color
Voltage
Part Number
Compact Fluorescent 9W
Clear
120V/60Hz
0802001001
Compact Fluorescent 9W
Green
120V/60Hz
0802002001
Compact Fluorescent 9W
Red
120V/60Hz
0802003001
Compact Fluorescent 9W
Yellow
120V/60Hz
0802004001
Compact Fluorescent 9W
Blue
120V/60Hz
0802005001
Clear
Max. 277V
0802006001
Green
Max. 277V
0802007001
Red
Max. 277V
0802008001
Yellow
Max. 277V
0802009001
Blue
Max. 277V
0802010001
CA0097
Description
Spare Parts
Part No.
Item
Globe
Description
Part No.
992005
Clear
993006
992006
Green
993007
Ballast
Ballast 9W ; 120V/60Hz
991008
Red
993008
Cable Gland
995042
Yellow
993009
Blue
993010
M a riT e a m L ig h tin g In c .
A Glamox Company
11
DLT RS (M) FR
IP20
Battery
Backup
120V/60Hz
120-277V/50-60Hz
Technical Specification
Application: Interior, recessed mounted.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP20
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Aluminium extrusion frame with a selection of
different acrylic diffuser materials. FR1: Double prismatic
acrylic panel, FR2: Acrylic opal panel, FR3: White acrylic
grid, FR4: Metallised acrylic grid in silver.
Electrics: Flexible wiring, heat resistant to 105C; through
wiring up to 15 A.
Cable entry: One knockout in each end and back.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500600 lumens for 90 minutes at 20C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Designed for recessed parallel mounting in a
linear interlocking ceiling system.(Dampa, Dana Acoustic,
BIP, etc.). Mounting kit provided.
Dimming: Optional dimming ballast available upon request.
Diffuser
Type
Type
2X17 Watt
FR1
FR2
FR3
FR4
2X20 Watt
FR1
FR2
FR3
FR4
2X32 Watt
FR1
FR2
FR3
FR4
2X40 Watt
FR1
FR2
FR3
FR4
Other voltages on request
12
M a riT e a m L ig h tin g In c .
A Glamox Company
DLT RS (M) FR
Description
Part No.
Description
Part No.
992001
991001
991004
991002
Battery
Lamp
994000
993011
994001
993012
994002
993013
994003
993014
993015
993016
993017
993018
Item
FR1
FR3
FR2
FR4
M a riT e a m L ig h tin g In c .
A Glamox Company
13
DLT RT (M) FR
IP20
Battery
Backup
120V/60Hz
120-277V/50-60Hz
Technical Specification
Application: Interior, recessed mounted.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP20
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Aluminium extrusion frame with a selection of
different acrylic diffuser materials. FR1: Double prismatic
acrylic panel, FR2: Acrylic opal panel, FR3: White acrylic
grid, FR4: Metallised acrylic grid in silver.
Electrics: Flexible wiring, heat resistant to 105C; through
wiring up to 15 A.
Cable entry: One knockout in each end and back.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500600 lumens for 90 minutes at 20C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Designed for recessed transverse mounting in a
linear interlocking ceiling system (Dampa, Dana Acoustic,
BIP, etc.). Mounting kit provided.
Dimming: Optional dimming ballast available upon request.
Diffuser
Type
FR1
FR2
FR3
FR4
2X20 Watt
FR1
FR2
FR3
FR4
2X32 Watt
FR1
FR2
FR3
FR4
2X40 Watt
FR1
FR2
FR3
FR4
Other voltages on request
Type
2X17 Watt
14
M a riT e a m L ig h tin g In c .
A Glamox Company
DLT RT (M) FR
Description
Part No.
Description
Part No.
992001
991001
991004
991002
Battery
Lamp
994000
993019
994001
993020
994002
993021
994003
993022
993023
993024
993025
993026
Item
FR1
FR2
FR3
FR4
M a riT e a m L ig h tin g In c .
A Glamox Company
15
Battery
Backup
120V/60Hz
120-277V/50-60Hz
Technical Specification
Application: Interior, recessed mounted.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP20
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Available with either a BatWing (BW) or DarkLight
(DL) aluminium louver with a clear acrylic finish.
Electrics: Flexible wiring, heat resistant to 105C; through
wiring up to 15 A.
Cable entry: One knockout in each end and back.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500600 lumens for 90 minutes at 20C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Designed for recessed parallel mounting in a
linear interlocking ceiling system. (Dampa, Dana Acoustic,
BIP, etc.). Mounting kit provided.
Dimming: Optional dimming ballast available upon request.
DarkLight(DL) Louver
BatWing(BW) Louver
Diffuser
Type
Type
2X17 Watt
BW
DL
2X20 Watt
BW
DL
2X32 Watt
BW
DL
2X40 Watt
BW
DL
Other voltages on request
16
M a riT e a m L ig h tin g In c .
A Glamox Company
Spare Parts
Item
Ballast
Description
Part No.
Description
Part No.
992001
991001
991004
991002
Item
Battery
994000
993068
994001
993069
994002
993070
994003
993071
M a riT e a m L ig h tin g In c .
A Glamox Company
17
Battery
Backup
120V/60Hz
120-277V/50-60Hz
Technical Specification
Application: Interior, recessed mounted.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP20
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Available with either a BatWing (BW) or DarkLight
(DL) aluminium louver with a clear acrylic finish.
Electrics: Flexible wiring, heat resistant to 105C; through
wiring up to 15 A.
Cable entry: One knockout in each end and back.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500600 lumens for 90 minutes at 20C. Other confiqurations
available upon request.
Mounting: Designed for recessed transverse mounting in a
interlocking ceiling system (Dampa, Dana Acoustic, BIP,
etc.). Also, suitable for most other tiled ceiling. Mounting kit
provided.
Dimming: Optional dimming ballast available upon request.
DarkLight(DL) Louver
BatWing(BW) Louver
Diffuser
Type
BW
DL
2X20 Watt
BW
DL
2X32 Watt
BW
DL
2X40 Watt
BW
DL
Other voltages on request
Type
2X17 Watt
18
M a riT e a m L ig h tin g In c .
A Glamox Company
Spare Parts
Item
Ballast
Description
2X17/32W ; 120V/60Hz ; Electronic
Part No.
991000
991001
991002
Item
Description
Part No.
992000
991004
994000
993082
994001
993072
994002
993073
994003
993074
M a riT e a m L ig h tin g In c .
A Glamox Company
19
DLT RS (JM) FR
IP23
Battery
Backup
120V/60Hz
120-277V/50-60Hz
Technical Specification
Application: Interior, recessed mounted.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP23
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Aluminium extrusion frame with a selection of
different acrylic diffuser materials. FR1: Double prismatic
acrylic panel, FR2: acrylic opal panel, FR3: White acrylic
grid, FR4: Metallised acrylic grid in silver.
Electrics: Flexible wiring, heat resistant to 105C; through
wiring up to 15 A.
Cable entry: One knockout in each end.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500600 lumens for 90 minutes at 20C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Designed for recessed parallel mounting in a
Jamestown Marine C70 ceiling. Fixed mounting hardware.
Dimming: Optional dimming ballast available upon request.
Diffuser
Type
FR1
FR2
FR3
FR4
2X20 Watt
FR1
FR2
FR3
FR4
2X32 Watt
FR1
FR2
FR3
FR4
2X40 Watt
FR1
FR2
FR3
FR4
Other voltages on request
Type
2X17 Watt
20
M a riT e a m L ig h tin g In c .
A Glamox Company
DLT RS (JM) FR
Description
Part No.
Description
Part No.
992001
991001
991004
991002
Battery
Lamp
994000
993011
994001
993012
994002
993013
994003
993014
993015
993016
993017
993018
Item
FR1
FR2
FR3
FR4
M a riT e a m L ig h tin g In c .
A Glamox Company
21
DLT RT (JM) FR
IP23
Battery
Backup
120V/60Hz
120-277V/50-60Hz
Technical Specification
Application: Interior, recessed mounted.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP23
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Aluminium extrusion frame with a selection of
different acrylic diffuser materials. FR1: Double prismatic
acrylic panel, FR2: acrylic opal panel, FR3: White acrylic
grid, FR4: Metallised acrylic grid in silver.
Electrics: Flexible wiring, heat resistant to 105C; through
wiring up to 15 A.
Cable entry: One knockout in each end.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500600 lumens for 90 minutes at 20C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Designed for recessed transverse mounting in a
Jamestown Marine C70 ceiling. Fixed mounting hardware.
Dimming: Optional dimming ballast available upon request.
Diffuser
Type
FR1
FR2
FR3
FR4
2X20 Watt
FR1
FR2
FR3
FR4
2X32 Watt
FR1
FR2
FR3
FR4
2X40 Watt
FR1
FR2
FR3
FR4
Other voltages on request
Type
2X17 Watt
22
M a riT e a m L ig h tin g In c .
A Glamox Company
DLT RT (JM) FR
Description
Part No.
Description
Part No.
992001
991001
991004
991002
Item
993027
Battery
994000
994001
993028
994002
993029
994003
993030
993031
993032
993033
993034
FR1
FR2
FR3
FR4
M a riT e a m L ig h tin g In c .
A Glamox Company
23
Battery
Backup
120V/60Hz
120-277V/50-60Hz
Technical Specification
Application: Interior, recessed mounted.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP20
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Aluminium extrusion frame with a selection of
different acrylic diffuser materials. FR1: Double prismatic
acrylic panel, FR2: Acrylic opal panel, FR3: White acrylic
grid, FR4: Metallised acrylic grid in silver.
FR1
Electrics: Flexible wiring, heat resistant to 105C; through
wiring up to 15 A.
Cable entry: Two knockouts in each end.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500600 lumens for 90 minutes at 20C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Designed for 24 / 609mm inverted T-bar ceiling.
Standard side mounting kit provided.
Dimming: Optional dimming ballast available upon request.
Diffuser
Type
Type
FR1
2X17 Watt
FR2
FR3
FR4
FR1
3X17 Watt
FR2
FR3
FR4
FR1
4X17 Watt
FR2
FR3
FR4
FR1
2X20 Watt
FR2
FR3
FR4
FR1
3X20 Watt
FR2
FR3
FR4
FR1
4X20 Watt
FR2
FR3
FR4
Other voltages on request
24
Diffuser Shown
M a riT e a m L ig h tin g In c .
A Glamox Company
Type
2X32 Watt
3X32 Watt
4X32 Watt
2X40 Watt
3X40 Watt
4X40 Watt
Diffuser
Type
FR1
FR2
FR3
FR4
FR1
FR2
FR3
FR4
FR1
FR2
FR3
FR4
FR1
FR2
FR3
FR4
FR1
FR2
FR3
FR4
FR1
FR2
FR3
FR4
Item
Ballast
Description
2X17/32W ; 120V/60Hz ; Electronic
2X20W ; 120V/60Hz ; Magnetic
2X40W ; 120V/60Hz ; Magnetic
2X17/32W ; 120-277V/50-60Hz ; Electronic
3X32W ; 120-277V/50-60Hz ; Electronic
3X17W ; 120-277V/50-60Hz ; Electronic
3X17/32W ; 120V/60Hz ; Electronic
3X20W ; 120V/60Hz ; Magnetic
3X40W ; 120V/60Hz ; Magnetic
Diffuser
FR1: 17/20W Double prismatic
(including frame) FR2: 17/20W Opal diffuser
FR3: 17/20W White plastic grid
M a riT e a m L ig h tin g In c .
A Glamox Company
Spare Parts
Part No.
Item
991000
Diffuser
991001 (including frame)
991002
991003
991006
991009 Lampholder
991010
Battery
991011
991012
Lamp
993035
993036
993037
Description
FR4: 17/20W Metallised silver grid
FR1: 32/40W Double prismatic
FR2: 32/40W Opal diffuser
FR3: 32/40W White plastic grid
FR4: 32/40W Metallised silver grid
17/20/32/40W ; G13 ; White (4 pcs)
Battery backup unit ; 90 minute ; 120V
Battery backup unit ; 90 minute ; 120-277V
17W/T8 ; Bi-pin ; Cool White
20W/T12 ; Bi-pin ; Cool White
32W/T8 ; Bi-pin ; Cool White
40W/T12 ; Bi-pin ; Cool White
Part No.
993038
993039
993040
993041
993042
992001
991004
991036
994000
994001
994002
994003
25
GIM
IP44
120V/60Hz
120-277V/50-60Hz
Technical Specification
Application: Cabins, corridors, galleys, pantries, etc.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP44
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Clear prismatic acrylic diffuser.
Electrics: Flexible wiring, heat resistant to 105C; through
wiring up to 15 A.
Cable entry: Two knockouts in each end.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500600 lumens for 90 minutes at 20C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Recessed in solid ceiling, swing out brackets for
easy adjustment.
Dimming: Optional dimming ballast available upon request.
Type
2X17 Watt
2X20 Watt
GIM 1036
GIM 1005
2X32 Watt
GIM 1001
GIM 1038
GIM 1006
GIM 1040
2X40 Watt
GIM 1002
GIM 1007
Spare Parts
Item
Ballast
Description
Part No.
Item
991000
Lamp
994000
991001
994001
991002
994002
991003
994003
26
992000
Description
2X17/20W
Diffuser
991004 (including frame) 2X32/40W
991036
Part No.
993075
993076
M a riT e a m L ig h tin g In c .
A Glamox Company
GIM M300
Battery
Backup
120V/60Hz
120-277V/50-60Hz
Technical Specification
Application: Cabins, corridors, galleys, pantries etc.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP44
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Clear prismatic acrylic diffuser.
Electrics: Flexible wiring, heat resistant to 105C; through
wiring up to 15 A.
Cable entry: Two knockouts in each end.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500600 lumens for 90 minutes at 20C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Recessed in 300mm linear tiled ceiling, swing
out brackets for easy adjustment.
Dimming: Optional dimming ballast available upon request.
Type
2X17 Watt
2X20 Watt
GIM 1013
GIM 1017
2X32 Watt
GIM 1014
GIM 1042
GIM 1018
GIM 1044
2X40 Watt
GIM 1015
GIM 1019
Part No.
Item
Description
991000
Lamp
Part No.
994000
991001
994001
991002
994002
991003
994003
992000
2X17/20W
993077
Description
17W/T8 ; Bi-pin ; Cool White
Diffuser
991004 (including frame) 2X32/40W
991036
M a riT e a m L ig h tin g In c .
A Glamox Company
993078
27
1961
IP66
Technical Specification
For galleys there are strict hygienic rules. This has
been taken into account when designing this
luminaire. The soft contours enable easy and rapid
cleaning.
Application: Galleys, pantries, provision stores etc.
Approvals: UL 1598 & 1598A and US Dept. of Public
Health.
Protection: IP66
Materials: Stainless steel backplate and aluzinc sheet
steel geartray.
Finish: Geartray: epoxy powder coated, white RAL 9016.
Diffuser: Clear polycarbonate.
Electrics: Flexible wiring, heat resistant to 105C.
Cable entry: Two inlets for max. cable diameter of 11mm.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W
T8 with electronic ballast.
Mounting: Direct to continously flat ceiling. 6/10 mounting
holes, 5mm in diameter.
Type
2X17 Watt
Voltage
120V/60Hz - HPF
0801009001
Universal Voltage
120-277V/50-60Hz
0801009004
2X32 Watt
0801010001
Other voltages on request
0801010002
Spare Parts
Item
Ballast
Lamp
28
Description
Part No.
991000
991003
994000
994002
Item
Description
Part No.
992000
993043
993044
995033
M a r iT e a m L i g h t i n g I n c .
A Glamox Company
1600
IP20
Technical Specification
Type
2X17 Watt
2X20 Watt
2X32 Watt
2X40 Watt
Voltage
120V/60Hz - HPF
1600 1000
Universal Voltage
120-277V/50-60Hz
1600 1004
Opal Polycarbonate
1600 1006
1600 1010
Ice Crystal
1600 1001
Opal Polycarbonate
1600 1007
Ice Crystal
1600 1002
1600 1005
Opal Polycarbonate
1600 1008
1600 1011
Ice Crystal
1600 1003
1600 1009
Diffuser
Ice Crystal
Opal Polycarbonate
Other voltages on request
Spare Parts
Item
Ballast
Part No.
Item
Description
991000
Diffuser
991001
991002
991003
992001
Lamp
Description
Part No.
993047
993048
995003
994000
994001
993045
994002
993046
994003
M a riT e a m L ig h tin g In c .
A Glamox Company
29
GKASA
IP20
Battery
Backup
Technical Specification
Application: Cabins, corridors, restrooms, etc.
Approvals: UL 1598 & 1598A and CSA C22.2 No.250.0-00
Protection: IP20
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: 3mm opal acrylic diffuser attached by endcaps.
Electrics: Flexible wiring, heat resistant to 105C.
Cable entry: One knockout in back and top.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90-minute battery backup. 500600 lumens for 90 minutes at 20C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Cornice mounting, direct to bulkhead or
deckhead.
Type
1X17 Watt
1X20 Watt
GKASA 1000
GKASA 1004
1X32 Watt
GKASA 1008
GKASA 1021
GKASA 1017
GKASA 1024
1X40 Watt
GKASA 1001
GKASA 1005
2X17 Watt
GKASA 1011
GKASA 1013
GKASA 1018
GKASA 1025
2X20 Watt
GKASA 1002
GKASA 1006
2X32 Watt
GKASA 1009
GKASA 1022
GKASA 1019
GKASA 1026
2X40 Watt
Other voltages on request
GKASA 1003
GKASA 1007
Spare Parts
Item
Ballast
30
Description
Part No.
Item
Description
Part No.
992001
991000
991016
991017
991003
991000
Diffuser
993052
993053
Battery
991004
991036
994000
Lamp
991001
994001
991002
994002
994003
M a riT e a m L ig h tin g In c .
A Glamox Company
GB2
Berth Light
IP22
120V/60Hz
Receptacle
Technical Specification
Type
Part Number
120V/60Hz - HPF GB2 1000
1X8W
Item
Description
Part No.
Ballast
991005
1X8W
Starter
995002
Lamp
994004
1X8W
992002
c/w on-off switch & convenience receptacle 120V/60Hz - HPF GB2 1003
Other voltages on request
Opal diffuser
993049
M a riT e a m L ig h tin g In c .
A Glamox Company
31
GSB
IP44
Receptacle
Technical Specification
Part Number
1X15W
1X15W
c/w on-off switch
1X15W
c/w on-off switch & convenience receptacle (NEMA 5-15R)
1X15W
c/w on-off switch & razor receptacle with isolation transformer (NEMA 5-15R)
1X17W
1X17W
c/w on-off switch
1X17W
c/w on-off switch & convenience receptacle (NEMA 5-15R)
1X17W
c/w on-off switch & razor receptacle with isolation transformer (NEMA 5-15R)
1X40W/30BX
1X40W/30BX
c/w on-off switch
1X40W/30BX
c/w on-off switch & convenience receptacle (NEMA 5-15R)
1X40W/30BX
c/w on-off switch & razor receptacle with isolation transformer (NEMA 5-15R)
Other voltages on request
32
120V/60Hz - HPF
GSB 1000
120V/60Hz - HPF
GSB 1001
120V/60Hz - HPF
GSB 1002
120V/60Hz - HPF
GSB 1003
120V/60Hz - HPF
GSB 1016
120V/60Hz - HPF
GSB 1017
120V/60Hz - HPF
GSB 1018
120V/60Hz - HPF
GSB 1019
120V/60Hz - HPF
GSB 1009
120V/60Hz - HPF
GSB 1010
120V/60Hz - HPF
GSB 1011
120V/60Hz - HPF
GSB 1012
M a riT e a m L ig h tin g In c .
A Glamox Company
GSB
Description
Item
Description
Part No.
991013
992007
991014
992008
991015
993050
993051
Part No.
995004
994005
994000
994006
M a riT e a m L ig h tin g In c .
A Glamox Company
Diffuser
33
GLA
IP20
Batten Luminaire
120V/60Hz
Technical Specification
Part Number
120V/60Hz
120V/60Hz
120V/60Hz
120V/60Hz
120V/60Hz
GLA 1001
GLA 1000
GLA 1004
GLA 1003
GLA 1002
Spare Parts
Item
Ballast
34
Description
Part No.
991014
991018
991019
Item
Description
Part No.
992000
994000
994001
991000
994033
991020
994002
994003
M a riT e a m L ig h tin g In c .
A Glamox Company
1395/1854
Max.
277V
On-Off
Switch
Technical Specification
Type
Description
Part Number
1X7 Watt
White
120V/60Hz
1854102
Compact
Dark Brown
120V/60Hz
1854100
White
Max. 277V
1395102
Incandescent
Dark Brown
Other voltages on request
Max. 277V
1395002
1X40 Watt
1395
Item
Voltage
1854
Spare Parts
Part No.
Item
Description
992009
Switch
Double pole
995005
992010
Ballast
Ballast 7W ; 120V/60Hz
991008
992011
Lamp
994008
994007
M a riT e a m L ig h tin g In c .
A Glamox Company
Part No.
35
CASA MARINE
IP22
Dimmable
1-10V
120V/60Hz
Insulated
Ceiling
Technical Specification
Application: Interior recessed downlight for use in insulated
ceilings or uninsulated ceilings.
Approvals: UL1598 and 1598A for insulated ceiling
applications
Housing: Aluzinc sheet steel, deep drawn.
Finish: Epoxy powder coated, white.
Electrics: Flexible wiring, heat resistant to 105C.
Reflector: Silver cone standard, others available on
request.
Cable entry: Two entries, one blind plugs.
Lamp base: 13W, GX23 or 18W GX24-q2
Light source(not included): Compact fluorescent lamp;
available in 13W or 18W.
Mounting: Secured to ceiling with screws in flange. Weight
Acrylic Diffuser
distribution panel available on request.
Dimming: Optional 18W dimmable fitting requires a remote
dimming ballast (BX0002) and a 1-10V dimmer. Max.
distance between BX0002 and Casa Marine is 2 feet.
Trim ring: See table for ordering information. Please order
trim rings separately.
Baffle
IP45 Diffuser
Type
13 Watt (H70)
120V/60Hz - HPF
18 Watt (H70)
120V/60Hz - HPF
18 Watt (H70)
Dimmable
Requires BX0002
13 Watt (H95)
120V/60Hz - HPF
18 Watt (H95)
120V/60Hz - HPF
18 Watt (H95)
Dimmable
Requires BX0002
18 Watt Remote
Mounted Dimming Ballast
120-277V/50-60Hz
Other voltages on request
Part Number
Trim Ring
Type
Trim Ring
Part Number
White 0702990001
Silver Cone
0702002001
Silver Cone
0702002002
Chrome 0702990003
Silver Cone
0702002003
Silver Cone
0702004001
Silver Cone
0702004002
Brass 0702990002
White Galvanized 0702990004
Silver Cone
0702004003
Baffle
Black 0702990006
White 0702990007
Acrylic Diffuser
IP45 Diffuser
Clear 0702990009
Clear White Ring 0702990010
Clear Brass Ring 0702990011
Clear Chrome Ring 0702990012
BX0002
36
M a riT e a m L ig h tin g In c .
A Glamox Company
CASA MARINE
Description
Part No.
991021
991022
1X18W ; 120-277V/50-60Hz
Dimmable (BX0002)
M a riT e a m L ig h tin g In c .
A Glamox Company
Item
Description
Part No.
992012
Lamp
991023
992013
994009
994010
37
GCN 14
IP20
Dimmable
1-10V
Insulated
Ceiling
Technical Specification
Application: Interior recessed downlight for use in insulated
ceilings or uninsulated ceilings.
Approvals: UL 1598 and 1598A for insulated ceiling
applications
Housing: Aluzinc sheet steel, deep drawn.
Finish: Epoxy powder coated, white RAL 9016.
Reflector: Silver (S) or Gold (G) aluminum plated.
Electrics: Flexible wiring, heat resistant to 105C.
Cable entry: Two entries, one blind plugs.
Lamp base: 13W, GX23 or 18W, GX24-q2.
Light source(not included): Compact fluorescent lamp;
available in 13W or 18W.
Mounting: Secured to ceiling with screws in flange. Weight
distribution panel available on request.
Dimming: Optional 18W dimmable fitting requires a remote
dimming ballast (BX0002) and a 1-10V dimmer. Max.
distance between BX0002 and GCN is two feet.
Trim ring: See table for ordering information. Please order
trim rings separately.
Gold Reflector
Silver Reflector
Spare Parts
Item
Ballast
Description
Part No.
991021
991022
38
992012
992013
994009
994010
M a r iT e a m L i g h t i n g I n c .
A Glamox Company
GCN 14
Trim Rings
Part Number
Standard fascia
Gold
0802990001
without lens
Silver
0802990002
Type
Type
Color
Part Number
Fascia with
Gold
0802990016
red lens
Silver
0802990017
White
0802990003
IP44
White
0802990018
Fascia with
Gold
0802990004
Fascia with
Gold
0802990019
clear lens
Silver
0802990005
Silver
0802990020
IP44
White
0802990006
IP44
White
0802990021
Fascia with
Gold
0802990007
Fascia with
Gold
0802990022
opal lens
Silver
0802990008
Silver
0802990023
IP44
White
0802990009
IP44
White
0802990024
Fascia with
Gold
0802990010
Fascia with
Gold
0802990025
Silver
0802990026
White
0802990027
Silver
0802990011
IP44
White
0802990012
Fascia with
Gold
0802990013
Fascia with
Gold
0802990028
frosted lens
Silver
0802990014
louver
Silver
0802990029
IP44
White
0802990015
White
0802990030
M a riT e a m L ig h tin g In c .
A Glamox Company
39
DL100 B0
IP20
Halogen
Technical Specification
40
M a r iT e a m L i g h ti n g I n c .
A Glamox Company
DL100 B0
Part Number
0701001000
0701001001
0701002000
0701002001
DL100B0 Accessories
50W GZ10/GU5.3
Straight Downlight
50W GZ10/GU5.3
Fixed 30 degree Downlight
Part Number
0701990001
0701990002
0701990003
0701990004
0701990005
0701990006
0701990007
0701990008
0701990009
0701990010
0701990011
0701990012
Item
Description
Spare Parts
Part No.
Item
995006
Lamp
Description
Part No.
994013
992014
994014
992015
994015
M a r iT e a m L i g h ti n g I n c .
A Glamox Company
41
GFI
IP44
Compact
Design
Technical Specification
Description
Voltage
Lamps/Watt
L (mm/in)
H (mm/in)
Weight (kg/lbs)
120V/60Hz
1/8
358/14.1
111/4.4
1.4/3.1
GFI 1008
120V/60Hz
1/17
630/24.8
111/4.4
2.0/4.6
120V/60Hz
1/8
358/14.1
111/4.4
1.4/3.1
GFI 1009
120V/60Hz
1/17
630/24.8
111/4.4
2.0/4.6
120V/60Hz
1/8
358/14.1
111/4.4
1.4/3.1
GFI 1010
120V/60Hz
1/17
630/24.8
111/4.4
2.0/4.6
Item
Ballast
Description
1X8W ;120V/60Hz ; Magnetic
991046
991024
42
Spare Parts
Part No.
Item
M a riT e a m L ig h tin g In c .
A Glamox Company
992016
Lamp
Starter
Description
Part No.
994004
994000
995002
992001
GFI
GFI 9X34
GFI 9X62
Decsription
GFI 2000
GFI 2001
GFI 2002
GFI 2003
GFI 2008
M a riT e a m L ig h tin g In c .
A Glamox Company
43
0633
IP20
Compact
Design
Technical Specification
Application: Interior recessed mounted illuminated sign.
Approvals: UL 1598 & 1598A and UL 924 approved. Sign
as per USCG requirements.
Housing: Aluzinc sheet steel or stainless steel.
Finish: Epoxy powder coated, white RAL 9016.
Sign: Polycarbonate, 2 in. high red letters with a white
background, single sided or double sided. All relevant signs
are available, please order separately.
Electrics: Flexible wiring, heat resistant to 105C.
Cable entry: Two knockouts in each end.
Lamp base: G5
Light source(not included): Fluorescent lamp: 8W/T5.
Mounting: Recessed in ceiling or bulkhead.
Part Number
Description
Voltage
Lamps/Watt
Weight (kg/lbs)
120V/60Hz
1/8
0.9/2.0
120V/60Hz
1/8
0.9/2.0
Housing
0803001001
0803001002
Stainless steel (cover only ; housing-aluzinc)
Other voltages on request
44
M a riT e a m L ig h tin g In c .
A Glamox Company
0633
Single Sided
Double Sided
Description
0803001101
0803001105
0803001102
0803001106
0803001103
0803001106
0803001104
0803001107
Item
Ballast
Description
1X8W ; 120V/60Hz ; Magnetic
M a riT e a m L ig h tin g In c .
A Glamox Company
Spare Parts
Part No.
Item
Description
Part No.
991005
Lamp
994004
992002
Starter
995002
45
GXPN
IP67
Battery
Backup
120V/60Hz
120-277V/50-60Hz
Class 1
Div. 2
Class 1
Zone 2
Temp.
T3B
Technical Specification
Application: Hazardous areas: decks, process areas,
machinery spaces, etc. Class 1 Division 2 and Class 1
Zone 2.
Approvals: Class I, Division 2, Groups A, B, C, D. UL 844,
UL 924, and CSA C22.2 No. 137-M1981.
Protection: IP67
Housing: Aluzinc sheet steel or stainless steel, deep drawn,
seamless.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Clear polycarbonate.
Electrics: Flexible wiring, heat resistant to 105C; through
wiring up to 15 A.
Cable entry: One conduit hub and one blind plug at each
end.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90 minute battery backup. 500600 lumens for 90 minutes at 20C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: 2 brackets for direct mounting to bulkhead or
deckhead. Custom mounting brackets are also available.
Remarks: Low temperature ballast is available upon
request.
46
M a riT e a m L ig h tin g In c .
A Glamox Company
GXPN
Type
2X17 Watt
GXPN 2019
GXPN 2030
GXPN 2023
GXPN 2032
2X20 Watt
GXPN 2001
GXPN 2005
GXPN 2020
GXPN 2024
2X32 Watt
GXPN 2002
GXPN 2027
GXPN 2006
GXPN 2029
GXPN 2021
GXPN 2031
GXPN 2025
GXPN 2033
2X40 Watt
GXPN 2003
GXPN 2007
GXPN 2022
GXPN 2018
Spare Parts
Item
Ballast
Lamp
Description
Part No.
Item
Description
Part No.
992000
991001
993000
991002
993001
991003
991025
Diffuser
Battery
994000
995007
994002
995008
994003
Lens Clip
995047
M a riT e a m L ig h tin g In c .
A Glamox Company
47
1833
IP67
Battery
Backup
120V/60Hz
120-277V/50-60Hz
Class 1
Div. 1
Class 1
Zone 1
Temp.
T6
Technical Specification
Application: Hazardous areas, Class I, Division 1 and
Class 1 Zone 1.
Approvals: CSA approved Class I, Division 1, Groups C &
D. Flame proof housing for supreme safety.
Protection: IP67
Housing: Corrosion resistant light weight aluminum alloy.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Clear polycarbonate.
Electrics: Flexible wiring, heat resistant to 105C. All
electrics installed on a fully removable gear tray.
Cable entry: Integral junction box with two NPT entries.
Lamp base: G13, spring loaded (17/32W only).
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90 minute battery backup. 500600 lumens for 90 minutes at 20C.
Mounting: Stainless steel mounting brackets.
Features: Removable gear tray allows for quick and easy
maintenance. Fixture can be converted to an emergency
fixture by simply replacing the normal gear tray with an
emergency gear tray.
Spare Parts
Description
Item
Ballast
Battery
Part No.
991000
991003
991001
991002
991004
991036
Lamp
Type
2X17 Watt
48
992003
992004
992001
994000
994001
994002
994003
2X32 Watt
1833007001
1833007002
1833007003
1833007004
2X20 Watt
1833006101
1833006102
2X40 Watt
Other voltages on request
1833007101
1833007102
M a riT e a m L ig h tin g In c .
A Glamox Company
GXPR
Battery
Backup
120V/60Hz
120-277V/50-60Hz
Class 1
Div. 2
Class 1
Zone 2
Temp.
T3B
Technical Specification
Application: Hazardous areas; Class 1 Division 2 and
Class 1 Zone 2.
Approvals: Class I, Division 2, Groups A, B, C, D. UL 844,
UL 924, and CSA C22.2 No. 137-M1981.
Protection: IP54
Housing: Aluzinc sheet steel.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Clear polycarbonate and clear prismatic diffuser.
Electrics: Flexible wiring, heat resistant to 105C; through
wiring up to 15 A.
Cable entry: One conduit hub and one blind plug at each
end.
Lamp base: G13
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast, 20/40W T12 with magnetic ballast.
Battery backup: Optional 90 minute battery backup. 500600 lumens for 90 minutes at 20C. Other configurations
available upon request.
Charge time after full discharge: 24 hours.
Mounting: Designed for recessed parallel mounting in a
linear interlocking ceiling system ( Dampa, Dana Acoustic,
BIP, etc.).
Without battery backup
Voltage
Universal Voltage
120V/60Hz - HPF
120-277V/50-60Hz
GXPR 1000
GXPR 1018
Type
2X17 Watt
2X20 Watt
GXPR 1001
2X32 Watt
GXPR 1002
2X40 Watt
Other voltages on request
GXPR 1003
GXPR 1019
GXPR 1008
GXPR 1021
GXPR 1009
Spare Parts
Item
Ballast
Battery
Description
Item
991000
Lampholder
991001
Lamp
991002
Description
Part No.
992000
994000
994001
994002
991025
994003
991037
2X17/20W
993079
Part No.
Diffuser
995007 (including frame) 2X32/40W
995008
M a riT e a m L ig h tin g In c .
A Glamox Company
993080
49
MAX
IP67
Battery
Backup
Class 1
Zone 1
Class 1
Zone 2
120V/60Hz
Temp.
T4/T5
Technical Specification
Application: Hazardous areas: decks, process areas,
machinery spaces, etc. Class 1 Zone 1 & 2 areas.
Approvals: CSA approved Class 1, Zone 1
Ex edm IIC T5 (T4 with battery backup).
Protection: IP67
Housing: Aluzinc sheet steel or stainless steel, deep drawn,
seamless.
Finish: Epoxy powder coated, white RAL 9016.
Diffuser: Clear polycarbonate.
Electrics: Flexible wiring, heat resistant to 105C; through
wiring up to 15A.
Cable entry: M20, M25 or PG16. One or two entries per
end. Please specify when ordering.
Lamp base: G13.
Light source(not included): Fluorescent lamp; 17/32W T8
with electronic ballast.
Battery backup: Optional 1.5 hour or 3.0 hour battery
backup. Suitable for use in an ambient temperature up to
45C.
Mounting: 2 brackets for direct mounting to bulkhead or
deckhead. Custom mounting brackets are also available.
1.5 Hour
3.0 Hour
2X17 Watt
MAX 1000
MAX 1002
MAX 1003
MAX 2000
MAX 2002
MAX 2003
2X32 Watt
MAX 1001
MAX 1004
MAX 1005
MAX 2001
MAX 2004
MAX 2005
Item
Description
Lampholder
992022
992023
994000
Lamp
50
Spare Parts
Part No.
Item
Description
Part No.
991041
2X32W; 120V/60Hz
991044
Emergency
991042
994002
Ballast
991043
Battery
Lens Clip
995043
Diffuser
993084
993084
Ballast
1.5 Hour
995045
3.0 Hour
995046
M a riT e a m L ig h tin g In c .
A Glamox Company
MAX
M a riT e a m L ig h tin g In c .
A Glamox Company
51
1069 028-031
IP67
Class 1
Div. 2
HPS/MH
Max. 400W
120-277V
Class 1
Zone 2
Temp.
T1
Technical Specification
Application: Fully self-contained high pressure sodium or
metal halide floodlight for hazardous areas; Class 1 Div. 2
and Zone 2.
Approvals: Class I, Division 2, Groups A, B, C, D, UL 844.
Protection: IP67
Housing: Stainless steel, deep drawn, seamless.
Finish: Epoxy powder coated, white RAL 9016.
Not exactly as shown
Lens: Easy to change safety glass, no tools required for
relamping.
Reflector: Highly polished aluminum, anodized. Available in
wide beam(50 degrees) or narrow beam(26 degrees).
Electrics: Flexible wiring, heat resistant.
Cable entry: External junction box with one conduit hub.
Lamp base: E39 mogul screw base.
Light source(not included): High pressure sodium or metal
halide, 250W or 400W.
Mounting: Two adjustable stainless steel brackets with two
mounting holes each, diameter (14mm).
Remarks: Integral ballast and ignitor included.
Part Number
Type
Floodlight 250W
Voltage
Reflector
HPS
MH
120/277V AC
Narrow Beam
1069028
1069028MH
Floodlight 250W
120/277V AC
Wide Beam
1069029
1069029MH
Floodlight 400W
120/208/240/277V AC
Narrow Beam
1069030
1069030MH
Floodlight 400W
120/208/240/277V AC
Wide Beam
1069031
1069031MH
994025
994032
994026
994034
Item
Description
Lampholder
992020
Reflector
Narrow Beam
Lens
52
Spare Parts
Part No.
Item
Description
Part No.
991026
993061
991027
Wide Beam
993062
250W MH ; 120/277V
991038
993063
400W MH ; 120/208/240/277V
991039
Ballast
Ignitor
250/400W HPS
995015
995018
Mounting bracket
995020
Capacitor
995019
Lens clamp
995021
995037
995038
M a riT e a m L ig h tin g In c .
A Glamox Company
1023
120V
440V
Class 1
Div. 2
Class 1
Zone 2
HPS
Max. 100W
Temp.
T2D
Technical Specification
Item
Description
Lampholder
Voltage
Part Number
Type
120V AC
1023444
120V AC
1023443
440V AC
1023441
120V AC
1023442
440V AC
1023440
994028
994029
994030
Spare Parts
Part No.
Item
992020
Capacitor
Description
Part No.
995024
Diffuser
Polycarbonate
993066
995025
Ballast
991028
995026
991029
Ignitor
100/70/50W HPS
995027
991030
Lens clamp
995028
991031
M a riT e a m L ig h tin g In c .
A Glamox Company
53
1076 060
IP67
Max.
220V
Halogen
Max. 200W
Technical Specification
54
Type
Voltage
Part Number
max. 250V
1076060
12V
994017
24V
994018
120V
994019
220V
994020
Spare Parts
Part No.
Item
Item
Description
Lampholder
992017
Reflector
993054
Lens
993055
Cable Gland
995009
M a riT e a m L ig h tin g In c .
A Glamox Company
Description
Part No.
Mounting bracket
995011
Lens clamp
995012
1069 040
Max.
220V
Halogen
Max. 500W
Technical Specification
Type
Floodlight max. 500W
Voltage
Part Number
max. 220V
1069040
120V AC
994021
220V AC
994022
Spare Parts
Part No.
Item
Item
Description
Lampholder
992018
Reflector
993056
Lens
993057
Cable Gland
995010
Description
Part No.
Stainless Steel
995013
Lens clamp
995014
Junction Box
995041
Mounting bracket
M a riT e a m L ig h tin g In c .
A Glamox Company
55
1069 012/015/016/017
IP67
Max.
220V
Halogen
Max. 1000W
Technical Specification
Type
Voltage
Reflector
Part Number
Floodlight 1000W
120V AC
Narrow Beam
1069012
Floodlight 1000W
120V AC
Wide Beam
1069016
Floodlight 1000W
220V AC
Narrow Beam
1069015
Floodlight 1000W
220V AC
Wide Beam
1069017
120V AC
994023
220V AC
994024
Item
Description
Lampholder
Reflector
Lens
56
Spare Parts
Part No.
Item
Description
Part No.
995010
992019
Cable Gland
Narrow Beam
993058
Mounting bracket
Stainless Steel
995016
Wide Beam
993059
Lens clamp
995017
993060
Junction Box
995041
M a r iT e a m L i g h t i n g I n c .
A Glamox Company
1069 008/009
HPS/MH
Max. 400W
Technical Specification
Application: Decks, mast, cargo, etc.
Approvals: UL 1598 & 1598A, USCG accepted.
Protection: IP67
Housing: Stainless steel, deep drawn, seamless.
Finish: Epoxy powder coated, white RAL 9016.
Lens: Easy to change safety glass, no tools required for
relamping.
Reflector: Highly polished aluminum, anodized. Available in
wide beam(50 degrees) or narrow beam(26 degrees).
Electrics: Flexible wiring, heat resistant.
Cable entry: External junction box with ignition unit and one
watertight brass M24x1.5 cable gland.
Lamp base: E39 mogul screw base.
Light source(not included): High pressure sodium or metal
halide, 250W or 400W.
Mounting: Adjustable stainless steel mounting bracket with
four mounting holes.
Remarks: External ballast unit 1513 series required. Must
be ordered separately.
Part Number
Type
Ballast Unit
Reflector
HPS
MH
Floodlight 250W/400W
"1513" Series
Narrow Beam
1069008
1069008MH
Floodlight 250W/400W
"1513" Series
Wide Beam
1069009
1069009MH
994025
994032
994026
994034
Spare Parts
Part No.
Item
Item
Description
Lampholder
992020
Reflector
Narrow Beam
993061
Wide Beam
993062
Ignitor
250/400W HPS
995015
Lens
993060
Description
Part No.
Cable Gland
995010
Mounting bracket
Stainless Steel
995016
Lens clamp
995017
M a riT e a m L ig h tin g In c .
A Glamox Company
57
1069 018-021
IP67
HPS/MH
Max. 400W
120-277V
Technical Specification
Application: Fully self-contained high pressure sodium or
metal halide floodlight for decks, mast, cargo, etc.
Approvals: UL 1598 & 1598A, USCG accepted.
Protection: IP67
Housing: Stainless steel, deep drawn, seamless.
Finish: Epoxy powder coated, white RAL 9016.
Lens: Easy to change safety glass, no tools required for
relamping.
Reflector: Highly polished aluminum, anodized. Available in
wide beam(50 degrees) or narrow beam(26 degrees).
Not exactly as shown
Electrics: Flexible wiring, heat resistant.
Cable entry: External junction box with one watertight brass
M24x1.5 cable gland.
Lamp base: E39 mogul screw base.
Light source(not included): High pressure sodium or metal
halide, 250W or 400W.
Mounting: Two adjustable stainless steel brackets with two
mounting holes each, diameter (14mm).
Remarks: Integral ballast and ignitor included.
Part N umber
T y pe
F loodlight 250W
Voltage
R eflector
H PS
MH
120/277V AC
N arrow Beam
1069018
1069018M H
F loodlight 250W
120/277V AC
Wide Beam
1069019
1069019M H
F loodlight 400W
120/208/240/277V AC
N arrow Beam
1069020
1069020M H
F loodlight 400W
120/208/240/277V AC
Wide Beam
1069021
1069021M H
994025
994032
994026
994034
58
Spare Parts
Part No.
Item
Item
Description
Lampholder
992020
Description
Part No.
991026
Reflector
Narrow Beam
993061
991027
Wide Beam
993062
250W MH ; 120/277V
991038
400W MH ; 120/208/240/277V
991039
995018
Ballast
Lens
993063
Ignitor
250/400W HPS
995015
Cable Gland
995010
995019
Mounting bracket
995020
995037
Lens clamp
995021
995038
Capacitor
M a riT e a m L ig h tin g In c .
A Glamox Company
1069 013/023
HPS
1000W
Technical Specification
Type
Ballast Unit
Part Number
Floodlight 1000W
"1513" Series
1069013
Floodlight 1000W
Indoor Remote
1069023
994027
Spare Parts
Part No.
Item
Item
Description
Description
Part No.
Lampholder
992021
Cable Gland
995010
Reflector
Ignitor
1000W HPS
993064
Mounting bracket
995020
995022
Lens clamp
995023
Lens
993065
M a riT e a m L ig h tin g In c .
A Glamox Company
59
1513 Series
IP67
120-277V
Technical Specification
Part Number
1513002
120/208/240/277V AC
1513004
120/208/240/277V AC
1513007
120/277V AC
1513010
120/208/240/277V AC
1513011
Item
Description
Description
Part No.
Ballast
991026
Cover clamp
995030
991027
Capacitor
995018
991032
995019
250W MH ; 120/277V
991038
995029
400W MH ; 120/208/240/277V
991039
15 Mfd ; 250W MH
995037
995010
24 Mfd ; 400W MH
995038
Cable gland
60
Spare parts
Part No.
Item
Voltage
120/208/240/277V AC
M a r iT e a m L i g h t i n g I n c .
A Glamox Company
12V
24V
DSB - 1
Sealed Beam
50/80W
Technical Specification
Deck Light DSB-1 is produced in cast MS and is painted
with plastic laquer. The DSB-1 is watertight and corrosion
resistant. Supplied with bracket for vertical and horizontal
turning of the light.
DSB-1 is supplied with a sealed beam lamp which provides
a higher luminous output than ordinary incandescent lamps
of same wattage. The built-in reflector is not affected by
dust.
- Available for 12V/50W and 24V/80W.
- Lamp lifetime 12V-2000 hours and 24V 1000 hours.
- PG 11 cable gland included.
- Lamp included.
- Weight: 0.9 kg.
Type
DSB-1
Wattage
50
80
Voltage
12V
24V
Part Number
1104001
1104002
M a riT e a m L ig h tin g In c .
A Glamox Company
61
Control Panel
Navigation Lighting
24V/120V/220V
50/60 Hz
Technical Specification
62
M a r i T e a m L ig h t i n g I n c .
A Glamox Company
Navigation Lighting
Control Panel
M a riT e a m L ig h tin g In c .
A Glamox Company
63
Control Panel
Navigation Lighting
24 VDC
115/230 VAC
Technical Specification
Features
Options
64
Secondary panel
Catamaran hull mimic
Auto mode functions for <<AT SEA>> and <<AT
ANCHOR>>
Auto mode functions for trawlers , <<SHOOT>>,
<<HAUL>>, and <<FAST>>
M a riT e a m L ig h tin g In c .
A Glamox Company
Navigation Lighting
Control Panel
Technical Data
M a riT e a m L ig h tin g In c .
A Glamox Company
65
Series 55
IP56
Navigation Light
12V
24V
32V
120V
Technical Specification
Application: Single lens navigation light for all vessels over
65.6 ft (20m) but less than 164 ft (50m) in length.
Approvals: USCG accepted. UL1104 & UL 1598 & 1598A
approved.
Housing: Black polycarbonate, glass fibre reinforced.
Housing corrosion resistant, self-ventilated, non-magnetic,
seawater resistant.
Optics: Easy to change, seawater resistant, special plastic
fresnel lens.
Electrics: Supplied with 1.5m special connection cable
2x1.5mm2, self-protective insulation, class II.
Cable entry: Special cable gland, metric pressure screw
PG13.5 with protection against buckling.
Lamp base: Special lampholder for P15d bayonet type
lamps.
Light source( included): In order to comply with USCG
regulations you must use Aqua Signal lamps. Available in
25W in 12V, 24V, 32V, & 120V.
Mounting: Base Flange attachment with 4 screws (not
included). Allround lights may also be hoisted when 2
halyard hooks are attached (not included). Additional
mounting aids available.
Remarks: Watertight access cap for quick relamping.
Weight kg[lbs]
Range
Part Number
Starboard
Type
1.2[2.5]
2nm
3535150
Portside
1.2[2.5]
2nm
3534250
Masthead
1.2[2.5]
5nm
3532050
Stern
1.2[2.5]
2nm
3533750
Stern yellow
1.2[2.5]
2nm
3533450
All-round white
1.1[2.4]
2nm
3531750
All-round red
1.1[2.4]
2nm
3531250
All-round green
1.1[2.4]
2nm
3531150
90400002
90400003
90400285
90400286
66
M a riT e a m L ig h tin g In c .
A Glamox Company
Navigation Light
Series 55
Spare Parts
M a riT e a m L ig h tin g In c .
A Glamox Company
67
Series 70
IP56
Navigation Light
120V
220V
24V
Technical Specification
Application: Single lens navigation light for all vessels over
65.6 ft (20m) in length.
Approvals: USCG accepted. UL1104 & UL 1598 & 1598A
approved.
Housing: Black polycarbonate, glass fibre reinforced.
Housing corrosion resistant, self-ventilated, non-magnetic,
seawater resistant.
Optics: Easy to change, seawater resistant, special plastic
fresnel lens.
Electrics: Supplied with 1.5m special connection cable
2x1.5mm2, self-protective insulation, class II.
Cable entry: Special cable gland, metric pressure screw
M24x1.5 with protection against buckling.
Lamp base: Special lampholder for P28 bayonet type
lamps.
Light source(included): In order to comply with USCG
regulations you must use Aqua Signal lamps. Available in
40W/24V, 60W/110V, & 65W/220V.
Mounting: Base Flange attachment with 4 screws (not
included). Allround lights may also be hoisted. Additional
mounting aids available.
Remarks: Watertight access cap for quick relamping.
Weight kg[lbs]
Range
Part Number
Starboard
Type
3.1[6.8]
3nm
3073109
Portside
3.1[6.8]
3nm
3074209
Masthead
2.9[6.4]
6nm
3071009
Stern
2.9[6.4]
3nm
3072709
Stern yellow
2.9[6.4]
3nm
3072499
All-round white
2.7[6.0]
3nm
3070009
All-round red
2.7[6.0]
3nm
3070209
All-round green
2.7[6.0]
3nm
3070109
All-round yellow
2.7[6.0]
3nm
3070499
90400171
90400172
90400173
68
M a riT e a m L ig h tin g In c .
A Glamox Company
Navigation Light
Series 70
Spare Parts
M a riT e a m L ig h tin g In c .
A Glamox Company
69
Series 70M
IP56
Navigation Light
120V
220V
24V
Technical Specification
Application: Double lens navigation light for all vessels over
65.6 ft (20m) in length.
Approvals: USCG accepted. UL1104 & UL 1598 & 1598A
approved.
Housing: Black polycarbonate, glass fibre reinforced.
Housing corrosion resistant, self-ventilated, non-magnetic,
seawater resistant.
Optics: Easy to change, seawater resistant, special plastic
fresnel lens.
Electrics: Main lighting (upper unit) and spare lighting
(lower unit) each supplied with 1.5m special connection
cable 2x1.5mm2, self-protective insulation, class II.
Cable entry: Two special cable gland, metric pressure
screw M24x1.5 with protection against buckling.
Lamp base: Special lampholder for P28 bayonet type
lamps.
Light source(included): In order to comply with USCG
regulations you must use Aqua Signal lamps. Available in
40W/24V, 60W/110V, & 65W/220V.
Mounting: Base Flange attachment with 4 screws (not
included). Allround lights may also be hoisted. Additional
mounting aids available.
Remarks: Watertight access cap and break-over design for
quick relamping.
Type
Weight kg[lbs]
Range
Part Number
Starboard
5.9[13.0]
3nm
3583109
Portside
5.9[13.0]
3nm
3584209
Masthead
5.9[13.0]
6nm
3581009
Stern
5.9[13.0]
3nm
3582709
Stern yellow
5.9[13.0]
3nm
3582499
All-round white
5.6[12.4]
3nm
3580009
All-round red
5.6[12.4]
3nm
3580209
All-round green
5.6[12.4]
3nm
3580109
All-round yellow
5.6[12.4]
3nm
3580499
All-round green/red
5.6[12.4]
3nm
3580309
All-round red/green
5.6[12.4]
3nm
3580319
All-round red/white
5.6[12.4]
3nm
3580329
90400171
90400172
90400173
Main light (upper) and spare light (lower) may be operated at different voltages. Bulbs have to be ordered separately.
70
M a riT e a m L ig h tin g In c .
A Glamox Company
Navigation Light
Series 70M
Spare Parts
M a riT e a m L ig h tin g In c .
A Glamox Company
71
DM 60
120V
230V
Technical Specification
FEATURES
72
Wattage
Voltage
Part Number
60W
120/12V
1805997
60W
230/12V
1805998
60W
120/24V
1805996
60W
230/24V
1805999
60W
12V
1806000
60W
24V
1806001
M a riT e a m L ig h tin g In c .
A Glamox Company
DM 60
Part No.
Description
Part No.
1806009
1806011
1806002
1806020
1703016
1806016
Filter, red
1806004
1806012
Filter, green
1806005
Transformer, 120/12V
1806018
Filter, blue
1806007
Transformer, 120/24V
1806019
Reduction filter
1806006
Transformer, 230/12V
1806013
Battery, 12V
1806015
Transformer, 230/24V
1806029
Plug, 3 pin
1806014
Socket, 3 pin
1806030
Transportation box
1806008
4021340
M a riT e a m L ig h tin g In c .
A Glamox Company
73
Searchlights
SH 200
74
HR 250, 650-R20
Remote control.
24V-250W.
115V-250W.
230V-250W/650W.
Halogen lamp.
Remote control.
115V-2000W/3000W.
230V-1000W/2000W/3000W/5000W.
Halogen lamp.
XR 500-R20
Remote control.
115V-500W.
230V-500W.
Zenon lamp.
M a riT e a m L ig h tin g In c .
A Glamox Company
Searchlights
Remote control.
115V-500W/1000W/1600W.
230V-500W/1000W/1600W.
Zenon lamp.
M a riT e a m L ig h tin g In c .
A Glamox Company
Remote control.
115V-1000W/1600W/2000W.
230V-1000W/1600W/2000W/3000W.
Zenon lamp.
R10/R20
SH 310D, 610
RS2
75
Type
SH 200
SH 260
SH 310
SH 370
SH 470
XS 500
XS 1000
XS 1600
76
Wattage
100W
100W
250W
250W
250W
500W
650W
1000W
1000W
1000W
250W
500W
650W
1000W
1000W
1000W
250W
500W
650W
1000W
1000W
1000W
2000W
2000W
500W
500W
1000W
1000W
1600W
1600W
Voltage
12V
24V
24V
24V
24V
24V
230V
24V
115V
230V
24V
24V
230V
24V
115V
230V
24V
24V
230V
24V
115V
230V
115V
230V
115V
230V
115V
230V
115V
230V
Direct Mounting
Version
Version
/D
/DH
100100120
100100220
100100320
100108120
100108125
100110020
100110025
100110120
100110125
100110320
100110325
100110220
100110225
100120420
100120425
100110420
100110425
100110520
100110525
100110620
100110625
100110820
100110825
100110720
100110725
100120920
100120925
100110920
100110925
100111020
100111025
100111120
100111125
100111320
100111325
100111220
100111225
100121420
100121425
100111420
100111425
100121520
100121525
100111520
100111525
100221720
100221725
100201720
100201725
100220020
100220025
100200020
100200025
100220520
100220525
100200520
100200525
Without
Control Lever
100108000
100108300
100108400
100108600
100108500
100128700
100108700
100108800
100108900
100109100
100109000
100129200
100109200
100109300
100109400
100109600
100109500
100129700
100109700
100129800
100109800
100221800
100201800
100220100
100200100
100220200
100200200
Bridge Mounting
Version
/B
100100430
100100530
100100630
100108030
100108330
100108430
100108630
100108530
100128730
100108730
100108830
100108930
100109130
100109030
100129230
100109230
100109330
100109430
100109630
100109530
100129730
100109730
100129830
100109830
100221830
100201830
100220130
100200130
100220230
100200230
Version
/BH
100100735
100100835
100100935
100108035
100108335
100108435
100108635
100108535
100128735
100108735
100108835
100108935
100109135
100109035
100129235
100109235
100109335
100109435
100109635
100109535
100129735
100109735
100129835
100109835
100221835
100201835
100220135
100200135
100220235
100200235
M a r iT e a m L i g h t i n g I n c .
A Glamox Company
SH 370-R10
SH 470-R10
SH 370-RS2
SH 470-RS2
SH 480-RS2
SH 650-RS2
XS 500-R10
XS 1000-R10
XS 1600-R10
XS 1000-RS2
XS 1600-RS2
XS 2000-RS2
XS 3000-RS2
Wattage
250W
250W
500W
650W
1000W
1000W
1000W
250W
500W
650W
1000W
1000W
1000W
250W
500W
650W
1000W
1000W
1000W
2000W
2000W
1000W
2000W
2000W
3000W
3000W
5000W
500W
500W
1000W
1000W
1600W
1600W
1000W
1000W
1600W
1600W
2000W
2000W
3000W
Voltage
24V
24V
24V
230V
24V
115V
230V
24V
24V
230V
24V
115V
230V
24V
24V
230V
24V
115V
230V
115V
230V
230V
115V
230V
115V
230V
230V
115V
230V
115V
230V
115V
230V
115V
230V
115V
230V
115V
230V
230V
Without Electric
Focus
100105940
100106040
100106140
100107040
100106240
100126940
100106940
100106340
100106440
100107340
100106540
100127140
100107140
100106640
100106740
100107540
100106840
100127440
100107440
100127240
100107240
100104460
100104560
100104360
-
With Electric
Focus
100105941
100106041
100106141
100107041
100106241
100126941
100106941
100106341
100106441
100107341
100106541
100127141
100107141
100106641
100106741
100107541
100106841
100127441
100107441
100127241
100107241
100104461
100104561
100104361
100112250
100112260
100112160
100221640
100201640
100221340
100201340
100221440
100201440
100220460
100200460
100220360
100200360
100220760
100200760
100200960
M a riT e a m L ig h tin g In c .
A Glamox Company
77
TECHNICAL
78
Searchlight Data
M a riT e a m L ig h tin g In c .
A Glamox Company
TECHNICAL
Lighting Terms
Technical Lighting Quantities and Units (according to DIN 5031)
Quantity
Name
Unit
Symbol
Name
Symbol
Correlation
Explanation
Luminous
Flux
Lumen
Im
Quantity
of light
Lumen
Hour
Im-h
Q= x t
Luminous
Intensity
Candela
cd
I= /
Luminance
Candela
per square
meter
cd/m2
Stilb
sb
Candela
per square
meter
cd/m2
Apostilb
Illuminance
L()=
I()
A x cos
Sb=104 x cd/m2
L()=
pxE
asb
L=p x E
lx
E=/
Lux
Symbol
Correlation
Explanation
Luminous
Efficiency
from a light
source
= / P
Optical
Efficiency
of a
luminaire
L= L / o
Quotient of the luminaires luminous flux L and the sum of the lamps luminous
fluxes o. For temperature dependent lamps such as fluorescent lamps, the
optical efficiency is the highest level of efficiency and no factors affecting the
luminous flux such as ambient temperature has been taken into consideration. It
indicates only the optical properties of a luminaire and is not to be used for
technical light calculations.
Light output
Ratio
LB
LB= LB(tu) / o
Utilization
R= N / L
Utilization
Factor
B= N / O
B= R x LB
The luminous efficiency of a light source is the quotient of the luminous flux
emitted and the electrical power required to produce it. Unit: lm/W.
Quotient of the luminous flux N, emitted to the affected area, and the total
luminous flux L radiated to the room from the luminaires.
Quotient of the luminous flux N emitted to the affected area and the sum of the
luminous flux o of all the lamps installed in the luminaires. It is the product of the
area effectivity factor R and the light output ratio LB
M a riT e a m L ig h tin g In c .
A Glamox Company
79
TECHNICAL
Incandescent lamps
Fluorescent lamps
1)
2)
3)
4)
5)
Halogen lamps
Halogen lamps have a higher luminous efficiency than the
ordinary incandescent bulb. Lifetime is estimated at 2000
hours average. Halogen lamps can be dimmed down to 60%
and burn at full strength immediately after a temporary break in
supply. This is useful when considering the question of
accident prevention and cannot be achieved with high power
discharge lamps.
Bulb life may be reduced by three factors:
1)
2)
3)
80
Lamp Comparison
M a riT e a m L ig h tin g In c .
A Glamox Company
TECHNICAL
Different Process
Mariteam Process Reflectors
Our secret chemical process imparts a pure aluminum-oxide surface on reflectors. This silken smooth finish reflects light semi-diffused
and free of interference, without glare and high maximum luminances. Removal of the iron particles means that the optics retain their
illumination qualities even in the toughest of environments.
Powder Coating
Our luminaires are powder coated with MX-powder (binder combination of epoxy and polyester)
The powder gets static charged and automatically sprayed on to the product, which is suspended to an earthed conveyor. The static
charge makes the powder stick to the product until the powder is melted and hardened in the tempering furnace.
After the product is sprayed with powder, it goes into a tempering furnace with an air temperature of approx. 200 degrees Celsius for 15
minutes causing the powder to melt and harden.
IP PROTECTION CLASSES
The following protection degrees define the protection of electrical appliances against accidental contact, foreign matters and water as
stated in IEC Publication 529 and DIN 40050.
Example:
IP
h0.3
Ident. Mark
1. Ident. Number (see table 1)
2. Ident. Number (see table 2)
Immersion depth in meters
1. Ident No.
No special protection
Protection against penetration of solid foreign matters, diameter > 50 mm, no protection against intentional contact e.g.
by hand, body contact, however, is prevented.
Protection against penetration of solid foreign matters with outside diameter of more that 12 mm; finger contact or similar
is prevented.
Protection against penetration of solid foreign matters with outside diameter of more that 2.5 mm. Prevents insertion of
tools, wires or similar matters larger than 2.5 mm.
Protection against penetration of solid foreign matters with outside diameter of more than 1 mm. Prevents insertion of
tools, wires or similar matters larger than 1 mm.
Protection against damaging dust accumulation. The penetration of dust is not totally prevented but is not permitted to
penetrate to such a degree that the effectiveness of the equipment is affected. Complete contact protection.
Protection against penetration of dust. Complete contact protection.
Table 1
2
3
4
5
6
2. Ident No.
No special protection
Protection against vertical falling drip water shall have no harmful effect.
Protection against vertical falling drip water, when fixture is shifted up to 15 degrees from its normal operating condition
there shall be no harmful effect (flanking drip water).
Protection against spray water falling at any angle up to 60 degrees against perpendicular. It shall have no harmful
effect (spray water).
Protection against water splashed against the fixture from any direction, shall have no harmful effect (splash water).
3
Table 2
4
5
6
7
8
Protection against water projected by a nozzle against the fixture from any direction, shall have no harmful effect (hosed
water).
Protection against heavy seas or strong jet stream, water must not enter the fixture in harmful quantities (overflooding).
Protection against water when fixture is submerged under defined conditions of depth. Water shall not enter fixture in
harmful quantities (submerging).
The equipment is suitable for continuous submersion in water under conditions specified by the manufacturer.
M a riT e a m L ig h tin g In c .
A Glamox Company
81
TECHNICAL
Materials
All Mariteam products are manufactured in materials which are best suited to withstand whatever atmospheric and mechanical
conditions they are exposed to. For this reason our products have an excellent reputation for reliability and long-life, particularly in
rough usage areas.
Aluzinc
Aluzinc is cold rolled steel with a metal coating. The steel guarantees mechanical strength. The coating, made up mainly of an alloy of
Aluminum (55%), zinc(43.4%) and Si(1.6%) guarantees excellent resistance to corrosion. Zinc also gives cathodic protection of cut
edges or surface scratches.
For applications requiring flat corrosion resistant steel, the answer is Aluzinc, which also demonstrates properties of unchanging surface
characteristics at high temperatures up to 310 degrees Celcius. Thanks to these characteristics, Aluzinc fills the gap between zinccoated steel and much more expensive materials such as aluminum or stainless steel.
Stainless Steel
Stainless Steel is used in luminaires which are being exposed to the harsh environments at sea, in special industry, especially chemical
industries etc.
In the Mariteam product range you will find luminaires of stainless steel quality SIS 2343, which is identical to American Standards AISI
316, except for containing slightly more molybdenum and nickel, thus making the steel easier to form (deepdrawn).
Plastic
Depending upon the application, a variety of high quality plastic materials are used in production. Some physical characteristics are
shown in the table below and the material used is specified in the individual data sheet.
Trade name
Temperature range
Mechanical properties
Transmissivity - colourless
Transmissivity white/opal
Combustibility according to UL
Chemical resistance general
- solvents
82
Polymethylmetacrylate
1 - PMMA
Acrylic Plexiglass
o
o
-50 C - +85 C
Good under normal
conditions of use
92%
46% - 65%
94-HB
good
not to be used
M a riT e a m L ig h tin g In c .
A Glamox Company
Polycarbonate
2 - PC
Markrolon Lexan
o
o
- 150 C - +130 C
Especially tough
(shock resistant)
82%
46% - 65%
94V-2 / 94V-0
good
not to be used
Polyethersulfon
3 PES
Ultrason Victex
o
o
- 100 C - +200 C
Good under normal
conditions of use
80%
94V-0
good
not to be used
TECHNICAL
Hazardous Areas
General
In any industry where flammable materials are produced, processed or stored there is a potential risk of explosion.
Although the objective is to prevent the release of gases or flammable mixtures into the atmosphere a release may take
place. Therefore actions are taken to assess the probability of occurrence of hazardous areas and explosion-proof
equipment must be installed in order to prevent an explosion.
Class I
Flammable Gases, Vapors or Liquids
Class I Groups
Division 1:
Zone 0:
Division 1 and 2
Zone 0, 1 and 2
Where ignitable
concentrations of
flammable gases,
vapors or liquids can
exist all of the time or
some of the time under
normal operating conditions.
Where ignitable
concentrations of
flammable gases,
vapors or liquids are
present continuously
or for long periods of
time under normal
operating conditions.
Zone 1:
A (acetylene)
B (hydrogen)
C (ethylene)
D (propane)
Division 2:
Where ignitable
concentrations of
Flammable gases,
vapors or liquids are
likely to exist under
normal operating
conditions.
Zone 2:
Where ignitable
concentrations of
flammable gases,
vapors or liquids are
not likely to exist under
normal operating
conditions.
Where ignitable
concentrations of
flammable gases,
vapors or liquids are
not likely to exist under
normal operating
conditions.
Zone 0, 1 and 2
T1 ([ 450C)
T2 (300C)
T2A, T2B, T2C, T2D
(280C, 260C,
230C, 215C)
T3 (200C)
T3A, T3B, T3C
(180C, 165C,
160C)
T4 (135C)
T4A (120C)
T5 (100C)
T6 (85C)
T1 ([ 450C)
T2 (300C)
T3 (200C)
T4 (135C)
T5 (100C)
T6 (85C)
M a riT e a m L ig h tin g In c .
A Glamox Company
83
TECHNICAL
Area
Div. 1
Div. 2
Area
Zone 0
Zone 1
84
Nonincendive
Non-sparking device
Purged/pressurized (Type Z)
Hermetically sealed
Any Class I, Div.1 method
Any Class I, Zone 0, 1 or 2 method
UL 1604
UL 1604
NFPA 496
UL 1604
UL 2279
CSA-213
CSA-213
NFPA 496
CSA-213
CSA-E79 Series
Zone 2
Hazardous Areas
Encapsulation, m
Flameproof, d
Increased safety, e
Intrinsically safe, ib
(1 fault)
Oil immersion, o
Powder filling, q
Purged/pressurized, p
Any Class I, Zone 0
method
Any Class I, Div. 1 method
UL 2279, Pt. 18
UL 2279, Pt. 1
UL 2279, Pt. 7
CSA-E79-18
CSA-E79-1
CSA-E79-7
IEC 60079-18
IEC 60079-1
IEC 60079-7
EN 50028
EN 50018
EN 50019
UL2279, Pt. 11
UL 2279, Pt. 6
UL 2279, Pt. 5
CSA-E79-11
CSA-E79-6
CSA-E79-5
CSA-E79-2
IEC 60079-11
IEC 60079-6
IEC 60079-5
IEC 60079-2
EN 50020
EN 50015
EN 50017
EN 50016
Nonincendive, nC
Non-sparking, nA
Restricted breathing, nR
Hermetically sealed, nC
Energy limited, nC
(nL for Europe)
Simplified pressurization, nP
Any Class I, Zone 0 or 1
method
Any Class I, Div. 1 or 2
method
UL 2279, Pt. 15
UL 2279, Pt. 15
UL 2279, Pt. 15
UL 2279, Pt. 15
CSA-E79-15
CSA-E79-15
CSA-E79-15
CSA-E79-15
IEC 60079-15
IEC 60079-15
IEC 60079-15
IEC 60079-15
EN 50021
EN 50021
EN 50021
EN 50021
UL 2279, Pt. 15
CSA-E79-15
IEC 60079-15
EN 50021
EN 50021
M a riT e a m L ig h tin g In c .
A Glamox Company
Index
Model
Page
Model
0633
44-45
1395
35
GIOC
10
1023 440
53
1444
8-9
GKASA
30
1023 441
53
1513
60
GKI
6-7
1023 442
53
1600
29
GLA
34
1023 443
53
1833
48
GSB
32-33
1023 444
53
1854
35
GSV
1069 008
57
1961
28
GXPN
46-47
1069 009
57
1995
11
GXPR
49
1069 012
56
CASA MARINE
36-37
HR 250, 650-R20
74
1069 013
59
DL100 B0
40-41
MAX
50-51
1069 015
56
16-17
NLC
64-65
1069 016
56
DLT RS(M) FR
12-13
R10/R20, RS2
1069 017
56
DLT RS(JM) FR
20-21
SERIES 55
66-67
1069 018
58
18-19
SERIES 70
68-69
1069 019
58
DLT RT(M) FR
14-15
SERIES 70D
70-71
1069 020
58
DLT RT(JM) FR
22-23
SH 200
74
1069 021
58
24-25
SH 260-470
74
1069 023
59
DM 60
72-73
SH 260-470 -R10
74
1069 028
52
DSB-1
61
SH 310D, 610
75
1069 029
52
GB2
31
SH 370-650 -RS2
74
1069 030
52
GCN 14
38-39
XR 500-R20
74
1069 031
52
GFI
42-43
XS 1000-3000 -RS2
75
1069 040
55
GIM
26
XS 500-1600
75
1076 060
54
GIM M300
27
XS 500-1600 -R10
75
M a riT e a m L ig h tin g In c .
A Glamox Company
Page
Model
Page
75
Canada
Corporate Office
Mariteam Lighting Inc.
85 OLeary Ave.
St. Johns, Newfoundland
A1B 2C9
Tel: (709) 753-2373
Toll Free: 1-800-938-8326
National Sales Agent
Jastram Technologies
188 Bunting Rd., Unit#10
St. Catherines, Ontario
L2M 3Y1
Tel: (905) 641-2587
Fax: (905) 641-5268
E-mail: mariteam@mariteam.com
Website: www.mariteam.com
Fax: (709) 753-2180
Toll Free: 1-800-898-2180
USA
National Sales Office
9000 Clay Road, Suite 104
Houston, Texas
77080
Tel: (713) 690-8383
Fax: (713) 690-8387
A Glamox Company
CV02