Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
AMONIAC
2/6
Table of content
Project survey............................................................................................................................................................ 3
Compressor Selection: Open-Type Reciprocating Compressors.............................................................................. 4
Technical Data: W6FA............................................................................................................................................... 5
Open-Type Reciprocating Compressors.................................................................................................................... 6
AMONIAC
3/6
Project survey
Selected compressors
Open-Type Reciprocating Compressors
Chosen accessory
Please select a compressor type
1x
W6FA
AMONIAC
4/6
90.0 kW
R717
Dew point temp.
-15.00 C
30.0 C
5.00 K
5.00 K
100%
1450 /min
Coupling (1:1)
100%
Result
Compressor
Capacity steps
Cooling capacity
Cooling capacity *
Evaporator capacity
Shaft power
Condenser Capacity
COP/EER
COP/EER *
Mass flow
Operating mode
Compr. speed
Necces. driving motor
Discharge gas temp. w/o cooling
W6FA
100%
66.8 kW
65.4 kW
66.8 kW
19.32 kW
86.1 kW
3.46
3.38
211 kg/h
Coupling (1:1)
1450 /min
30.0 kW
143.5 C
AMONIAC
Technical Data
Technical Data
Displacement (1450 RPM 50Hz)
Displacement (1750 RPM 60Hz)
No. of cylinder x bore x stroke
Allowed speed range
Weight
Max. pressure (LP/HP)
Connection suction line
Connection discharge line
Oil type NH3
Extent of delivery (Standard)
Oil charge
Protective charge
Suction shut-off valve
Discharge shut-off valve
Pressure relief valve
Water-cooled cylinder heads
Available Options
Coupling (..-K) w. A/C + medium
Coupling (..-K) w. low temp.
Coupling housing
Motor pulley (..-S)
V-belts
Discharge gas temperature sensor
Start unloading
Connection cooling water
Capacity control
Oil service valve
Crankcase heater
Oil pressure monitoring
Suction line filter
151,6 m3/h
183,0 m3/h
6 x 82 mm x 55 mm
900 .. 1750 1/min
161 kg
19 / 25 bar
NW 50
NW 40
Reniso KC68 (Standard)
5,0 dm3
Standard
Standard
Standard
Standard
Standard
KK620 [<22kW] / KK630 [<45kW] (Option)
KK625 [<22kW] / KK630 [<45kW] (Option)
Option
190, 210, 230 mm (Option)
5 x SPA (Option)
Option (incl. INT69VS)
Option
R 3/4''
100-66-33% (Option)
Option
140 W (Option)
MP55A (Option)
Option
5/6
AMONIAC
6/6